Upload Masters Thru J1ID
I want to upload Master CIN data Thru transaction J1ID , what is the best method to upload??
I am using LSMW but it is very slow , so will i use BDC for it or is there any standard BAPI available for this tcode
Hi Virendra,
I think that your solution is very good for my purpose.
But in my implementation there is no way to insert a new element in an existing WBS, I can only edit attributes for an element already created, for example, in cj02.
I checked all the menus but i didn't find any useful command.
Could you send me a screenshot of the keypoint in which you can create the element different from the first level?
Thank you very much.
Giorgio
Similar Messages
-
Upload data thru LSMW -WBS with 3 levels
Hi PS Experts,
My situation is like I have to upload data thru LSMW for all Levels! As I m doing for only L3 WBS with PD it is going upto 14 steps and executing.But for Level 2 and Level 3 it is not executing. In the Step "Read Data" it is showing blank.
Can v upload these multilevel data thru LSMW? or how is like?
Thanks in advance,
Sanju..Hi Virendra,
I think that your solution is very good for my purpose.
But in my implementation there is no way to insert a new element in an existing WBS, I can only edit attributes for an element already created, for example, in cj02.
I checked all the menus but i didn't find any useful command.
Could you send me a screenshot of the keypoint in which you can create the element different from the first level?
Thank you very much.
Giorgio -
Want to upload vendor masters thru FK01
< MODERATOR: All points have been UNASSIGNED and the message locked. Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.>
Is there any standard program, to upload vendor masters.
I have , vendor name, address, reco a/c, payment terms ....
I have tried thru BDC, but while recording, i am not getting all the address lines. Ony first address line is coming,
what is to be done ??
Thanks
amitUse lsmw
Take direct input method with object 0040 with Method Standard 0001.
You can select the feilds that you wanted and upload directly.
Alternatively, Check the Feild status group settings of the Vendor group for teh suppression of Address details. You enable and record teh BDC.
reward if useful.
sarma -
Mobile Me will only upload masters
When I create a gallery with Mobile Me, it uploads the masters not the versions. Is there a way to upload the versions or do I have to export the versions and bring them into iPhoto to then upload?
Thanks,
DaveYou probably have the download setting set at; "Optimized and Master Images".
In the Web Gallery settings (a little drop down button in the bottom of the browser) you can set Allow Downloading of "Optimized Images" instead.
Regards
Paul K -
Hi Experts
here by i am developing 1 bsp application.
the requirement is i have a text file in c Drive . here by i have to uplaod to BSP .
data from text file has to come to bsp in the form of internal table
when i try to use the gui_upload function to upload a text file into bsp , its thru dump.
kindly help. how to uplaod a data into bsp page .Hi Irfan Rehman,
This topic is already raised by the many people in SDN. Please look at these following threads,
It should be useful!
1. How to upload file with BSP?
2. Excel File Upload Problem
3. File Upload
4. Uploading multiple documents using file upload option
Hope it helps! Please do search in SDN before posting the question. Thanks!
Regards,
Maheswaran -
Uploading data thru BDC into APPCREATE transaction
Hi,
I have used BDC to upload data in the tcode APPCREATE. When I see the uploading using the call transaction method, I am able to see that all the screens are getting populated correctly. But, When I check the result of the upload in APPSEARCH tcode, i am not able to see the completed status. Still the status is 'In Preparation'.
But manually, I am able to do that. I just want to find out if any keys needs to be activated/changed before doing the upload thru BDC.
Thanks & Regards,
SureshHi,
I have used BDC to upload data in the tcode APPCREATE. When I see the uploading using the call transaction method, I am able to see that all the screens are getting populated correctly. But, When I check the result of the upload in APPSEARCH tcode, i am not able to see the completed status. Still the status is 'In Preparation'.
But manually, I am able to do that. I just want to find out if any keys needs to be activated/changed before doing the upload thru BDC.
Thanks & Regards,
Suresh -
How to upload product thru COM_PRODUCT_MAINTAIN
Hi Gurus !
Pls tell me how to upload product in CRM (COMPRO01) thru COM_PRODUCT_MAINTAIN.
Thanks in Advance.
Regds
NavneetDear Navneet,
You can use LSMW with Idoc.
Message Type: CRMXIF_PRODUCT_MATERIAL_SAVE.
Thanks,
Atin -
Problem with: Upload file thru Web access.
We have configure iFS 1.1 on AIX 4.3. Everything is running fine like ifsstart, ifsmgr. Its showing me all protocols and agents running.
I am able to access iFS through web access program and its accepting login and password. After login in to iFS server when we try to upload any file using Brower option its gives us following error.
Request URI:/ifslogin/jsps/upload2.jsp
Exception:
java.lang.NoClassDefFoundError: java/sql/Blob
at oracle.jdbc.driver.OracleStatement.get_blob_value(Compiled Code)
at oracle.jdbc.driver.OracleStatement.getBLOBValue(Compiled Code)
at oracle.jdbc.driver.OracleStatement.getObjectValue(
Can anybody guide us. We are not having JAVA knowledge.
Thanks
DilipHi,
create an attribute(say ca_fileupload) of type XSTRING under context and bind that attribute with the data property.
For binding the attribute just Click on the element file_up , there you can see data property,click on that and you can see all the nodes and attributes you have created and there click on the attribute(ca_fileupload). -
Upload Files thru Internal ITS of SRM
Hello Gurus,
I need your help, please.
I need to upload a file from a webpage to SAP and then process the information.
I work with SRM 4.0 with ITS Internal.
The page has to be done in SAP. I tried the FM GUI_UPLOAD, but i receive a error.
Is any way to do this?
Thanks in advanced, for your help.
Best Regards.
PauloHello Paulo,
unfortuanatelly I do not know of any other examples, belonging to the SAP_BASIS component
(which is contained in every R/3).
There are two other examples in service bbpstart and bwsp, but I don't know, if you have these
services in your R/3, because they are belonging to another component (bbpstart, I think to srm).
In it00 click on "continue", then on "upload/download", it is template it00/99/sapmitst1_2500.html,
the related abap coding is in the PAI of dynpro 2500 of program sapmitst1.
This is all true, if you are not using the webgui service, but an own IAc service.
If you use the webgui service, then it is better to use function module gui_upload.
The description of the makro mime-upload you find in the sap help library under
http://help.sap.com/saphelp_nw04/helpdata/en/54/4d9993c6592941a407313a6763575c/frameset.htm
Best regards,
Ralf -
I'm publishing an .fla in AIR for IOS.
I'm in CC 2014 so first I need to know which AIR should I publish in?
newest is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
publishes with no error.
I see the following files included .swf and app.xml
I convert the .ipa to a zip file
Upload that thru the Application Loader I get the following error
The package does not contain an Info.plist.
Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
I converted the .ipa to a .zip and the intoplist file is NOT THERE how do I generate this?
Any help here?Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
I used my previous p12, app ID and distribution certificates all generated properly.
The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
I changed it to the right app ID and the very next time and after 10 attempts I got the same error Digital Certificate is not valid
SO I then downloaded AIR 16.0
RE DID ALL MY CERTIFICATES AND P12'S
went to publish and I STILL GET THE SAME MESSAGE Digital Certificate is not valid -
Service master upload using LSMW
Hi,
I am trying to upload service masters thru LSMW. When I try to record thru AC01, all the fields are greyed out and the create button is also greyed out.
Pls Help.
Best regards,
ArahanthAC01 is not ment for LSMW SAP does not allows to create LSMW with tcode AC01
try to create LSMW by AC02
when u go to initial screen the click on Create icon ir blank doc icon
u r issue will be solved 100 %
Rewqard if ur issue solved
Message was edited by:
Umakant Bhangale -
Upload Opening balance of G/L accounts from legacy system to SAP, and also
Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
TO clearing account A/c
2) clearing account A/c -
dr
Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MVHi,
When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO -
Error while uploading documents
Hi,
When we trying to upload documents thru CV01N transaction w.r.t document type,we are getting the error message as
"Please enter the data in Object link tab" Message No : ZHR252.
When we checked the configuration in DC10, No any objects have been linked to this particular Document Type.
My question is, eventhough no any objects have been configured to document type, why the error message is getting appeared while saving the DIR.
Would like to know is there any User Exit which is getting triggered in the backend?
Regards
BhanuHi,
When we trying to upload documents thru CV01N transaction w.r.t document type,we are getting the error message as
"Please enter the data in Object link tab" Message No : ZHR252.
From the error message its very clear that some custom code has been written to control upload operations in CV01n.
Message no starts with "Z".
You can have a look into the following BADI's to check for the custom code.
DOCUMENT_OBJ1 User Exit Document Link Object Page
DOCUMENT_OBJ Interface Connection From Object Links Document Page
DOCUMENT_OBJ2 BADI for object links update
Additionally check the following customer exists relevant for CV01N.
CV000001
CV110001
CVDS0001
Hope this answers your query.
Regards,
Deepak Kori -
Need to Skip the fields duaring the data upload by SQL*Loader.
Hi all,
I am not able to get how to skip some fileds in the file while uploading it thru SQL*Loader. Let us have a look the below scenario.
The table has 4 columns. but in the input file came up with 6 fields. Let us assume the four fields came as first in the order. Then, we can populate the data into the 4 columns of the table. At the same time we want to skip the remaining fields. Even those fields/columns are no longer available in the database table.
For example:
create table data_temp(sno number,name varchar2(10 char),sex char(1),loc varchar2(20 char));
Data file
sno,name,sex,loc,organization,contact
1,ram,M,India,HP,998976789
2,Shesha,M,India,IBM,7890808098
Control_file
OPTIONS(SKIP=1)
LOAD DATA
INFILE *
APPEND INTO TABLE data_temp
FIELDS TERMINATED BY ',' optionally enclosed by '"'
TRAILING NULLCOLS
sno "trim(:sno)",
name "SUBSTR(trim(:name),1,20)" ,
sex "SUBSTR(trim(:sex),1,1)",
loc "SUBSTR(trim(:loc),1,20)" ,
Please suggest me how to implement the above scenario in the control file.
Thanks in Advance!!
Regards,
Vissu.....Use FILLER. Control file:
OPTIONS(SKIP=1)
LOAD DATA
INFILE *
APPEND INTO TABLE data_temp
FIELDS TERMINATED BY ',' optionally enclosed by '"'
TRAILING NULLCOLS
sno "trim(:sno)",
name "SUBSTR(trim(:name),1,20)" ,
sex "SUBSTR(trim(:sex),1,1)",
loc "SUBSTR(trim(:loc),1,20)" ,
organization filler,
contact filler
begindata
sno,name,***,loc,organization,contact
1,ram,M,India,HP,998976789
2,Shesha,M,India,IBM,7890808098
{code}
Now:
{code}
SQL> create table data_temp(sno number,name varchar2(10 char),sex char(1),loc varchar2(20 char));
Table created.
SQL> host sqlldr scott/tiger control=c:\temp\vissu.ctl log=c:\temp\vissu.log
SQL> select * from data_temp
2 /
SNO NAME S LOC
1 ram M India
2 Shesha M India
SQL>
{code}
SY. -
Upload problem in Safari with Flash Player
Hi All,
Had this problem for ages and was thinking to sort it out now.
I can't upload files thru flash uploader such as google email, soundcloud and other sites.
Getting following error messages:
Google - Attachment failed. This may be due to a proxy or firewall.
Soundcloud - There was an error while uploading. Waiting to retry...
Same procedure works perfectly on Firefox.
Using Macbook Pro Intel, OSX 10.6.6, Flash Player 10.1.102.64Hi All,
Had this problem for ages and was thinking to sort it out now.
I can't upload files thru flash uploader such as google email, soundcloud and other sites.
Getting following error messages:
Google - Attachment failed. This may be due to a proxy or firewall.
Soundcloud - There was an error while uploading. Waiting to retry...
Same procedure works perfectly on Firefox.
Using Macbook Pro Intel, OSX 10.6.6, Flash Player 10.1.102.64
Maybe you are looking for
-
Hi,This is Dr Mohammad Bashir Ahmed from united arab emirates,I just got my iphone 4S today and i am really disappointed because its coverage is very poor as compared to my previous iphone 3 GS,i used my iphone 4S today in same areas of my house wher
-
I'm new to having a mac so if anyone could help me out that'd be great. Is there anything different with plug ins for the internet when it comes to mac? so confused
-
Double quotes problem while uploading tablimeited text file to internal tab
H all, I am uploading excel data using GUI_UPLOAD function module by converting excel to tab delimited text format. Problem is Material AB" is converted to "AB" " " material in tabdelimited text format. Can anybody give solution to problem
-
I had the common "user does not respond" issue when trying to use iSight through iChat so I trawled through the postings listed and did everything recommended from opening up ports to turning off firewalls.... I then found out I had no problem connec
-
Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"