Upload Maximum Date Rate Lower Than Upload Data Ra...

Hello there,
I have just brought up my BT Home Hub 5 stats and my upload data rate is higher than my upload maximum date rate. Is this normal? My upload noise margin has dropped to 4.9 - 5.1 dB. I've had BT Infinity just over 2 days and was wondering if this was normal for FTTC connections?
Many thanks,
William

normally the data rate will be lower than max data rate but yours is that close I would not bother unless it starts to affect your connection which is unlikely
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Document date is earlier than acquisition date for asset

Client has an asset which they want to post an acquistion for as of 1/1/2011. They are in December of 2011. They first put an acquisition in with 12/31/2011 and then cancelled it, realizing they needed a docdate of 1/1/2011. When they try to redo the acquisition with a docdate of 1/1/2011 they get the error "Document date is earlier than acquisition date for asset xxxxx"
The capitalization date on the asset is 1/1/2011. I looked at the acquisition date (thorugh SQL) and it is "1899-12-30 00:00:00.000"
Does anyone know why it is preventing from posting?
(Posting dates allowed are 1/1/11-12/31/11 for period 12 of 2011 and the period is unlocked)
Alan

Hi
I do believe that the problem is in the capitalization date 12/31/2011
Even if you have cancellled the first acqusition , and the acquisition date has taken the dummy date that assets have when there are no acqusitions 1899-12-30 00:00:00.000
Still the capitalization date remains 12/31/2011
and this will deter any transactions earlier than 12/31/2011
My question is,
can you still edit the field capitalization date?
Jose Antonio Castillo

Is there a way to sort pdf by date created rather than by date added?

In iBooks in Mavericks, is there a way to sort pdf by date created rather than by date added?

I noticed that the "Year" information and "Release Date" information are usually wrong.
For example, the song "The Twist" by Chubby Checker has 2007 for the year and 3/5/2007 as the release date. I understand that this is the release date of the greatest hits compilation album, but not the song.
Is there any way to change the dates so that I can sort by year? I would like 60s songs to appear with a 1960s year or release date.

Doc Date is Greater than Posting Date in Migo

Hi ,
Document Date shouldn't be greater than Posting date in MIGO .How can I restrict it ??
Biswajit

Hi
We can restrict through Define Attributes of system messages
Settings for SYSTEM MESSAGES - Doc Date is Greater than Posting Date in Migo in that in that Message Type we can make the Warning Message to Error Message
regards,
senthil.

ESS Bank Information errors if end date is less than system date

Hi to all,
We have create an WD Java aplication to create new entries in infotype 0023. We have used a standar component DC (PersInfo).
The first problem - we couldn't create new entries if start date is less than system date and we used:
In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
Business Add-In HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
Parameters of the method DEFAULT_DATE:
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
We have solved the first problem with begda.
The second problem - we couldn't create new entries if end date is less than system date.
Can anybody helps me about this second problem?
Thank a lot.

Can anybody helps me?
Thank a lot.

ESS Information errors if end date is less than system date

Hi to all,
I have create an WD Java aplication to create new entries in infotype 0023.
First problem: At the beginning I couldn't create new entries if start date is less than system date. To solve this problem I used:
The transaction SPRO to go to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
In HRXSS_PER_BEGDA I changed BEGDA to 01.01.1900 in the DEFAULT_DATE method and i solved the first problem.
Now I need solved the second problem - we couldn't create new entries if end date is less than system date.
In this method DEFAULT_DATE I can't change ENDDA because ENDDA isn't a parameter in this method.
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
Can anybody helps me about this second problem?
Thank a lot for your help.

I am creating an aplication WD Java:
- This application uses a R3 Function Module HRXSS_PER_MODIFY_PNNNN
- This FM uses the method CALL METHOD xss_adapter->modify
- This Method uses IF_HRPA_PERNR_INFTY_XSS~MODIFY
- This method uses:
IF buffer_entry-container->a_pskey-endda < user_today.
    msg-msgid = 'PG'.
    msg-msgty = 'E'.
    msg-msgno = '016'.
    msg-msgv1 = 'Data valid only for past is not'(009).
    msg-msgv2 = 'allowed;'(010).
    msg-msgv3 = 'correct'(011).
    msg-msgv4 = 'end date to a date today or future date.'(012).
    CALL METHOD message_list->if_hrpa_message_handler~add_message
      EXPORTING
        message = msg
        cause   = xss_adapter_generic.
ENDIF.
How can I change the value user_today?
This value is a parameter for the method GET_INSTANCE in CL_HRPA_PERNR_INFTY_XSS, but I don't know when this method is called.
Can you help me?

Another question? Is 2G iPhone data plan lower than 3G iPhone data plan?

If I take a 2G iPhone into AT&T and get it set up, is the data plan rate for 200 text messages and internet lower than the 3G iPhone data plan rate. I know the 3G in $30 + $5 (200 text messages) = $35. What would it be for the 2G?
Thanks...
(I want to give my wife my 2G to replace her flip phone and get me a new 3G)

The First Generation iPhone is $20 for Unlimited Data and includes 200 SMS text messages, You can add more to the plan but it will be an additional cost. For $40 total you get Unlimited Text and Data usage.

How do I view photos in a folder by date taken rather than by date imported?

Hi, I've got some 500 photos in a folder which were imported on two different dates. I've created a new album on the right hand side under "Organize" and just the photos I want are in there. When I look at the folder on the right, all the pictures are there. But I can't call up just that folder; instead what I get on my screen is all 2500 photos in all my photo albums! Not what I want! What I want to get is all the photos in the order in which they were taken on the actual day as all 500 photos were taken at the same day. And I want to be able to view just the 500 photos in that folder by the time those pictures were taken. But, when I imported the second batch of photos it showed the date the file was created rather than the date the photo was taken so, basically, I've got one batch of photos showing the date they were taken (which I downloaded via a link a few days later), and one showing the date they were copied! I've clicked on various tabs on the Organize and Display tabs but can't get it to work so any advice would be appreciated.
Many thanks.
Yours sincerely,
Anthony Armstrong

Once you have all 500 in the album you should be able to use the dropdown menu - there are three choices. Try switching to oldest first. Album order lets you drag into any order of your choice and they remain in fixed positions.

Bill Date not later than PGI date

D/ Friends,
Suppose PGI date is 3.6.2010 & user is creating bill doc on 5.6.2010 but entering a date later than PGI date say e.g 2.6.2010. Now we want that sys shd not accept a manually entered bill doc date later than PGI date. I think, Iu2019ve made my issue very clear. So how to achieve this thru std. config? We know that thru ABAP a u201CZu201D chck is possible to apply for this scenario but we want to do it thru std. config. Pls help.
Thanks.

Go to VTFL, select the item category for the combination of your delivery type and billing type and maintain routine 011 for the field "Data: VBRK/VBRP". If you have already assigned a different routine, then add this code
VBRK-FKDAT = SY-DATUM"
Also the above routine will only propose the system date but it can be changed manually. In order to prevent this, you can make the date field as grey through billing exit USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC). By doing so, system will always system date (if you applied routine 11) or the actual GI date which cannot be changed.
thanks
G. Lakshmipathi

ESS Bank Information errors if start date is less than system date

Hello Developers,
We are unable to create a new Bank Information record of type "Other" from ESS Web Dynpro ECC 6.0 when we set the begda field to a date earlier than the system date. When we attempt this we get the message: "Start date should be after <todays date> or later".
Is there a configuration setting that will allow new records to be created with the begda set to a past date when creating new "Other" bank type records?
Our payroll runs bi-weekly and we need to set the beginning date of a new record to the start date of the payroll cycle, which can be earlier than the creation date.
Thank you

Terry,
In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
Business Add-In HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
Parameters of the method DEFAULT_DATE:
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
Regards
Sarath

From Date is greater than End Date of a BBP document.

Hi,
There is a BBP document created in the system which has From Date (BBP Start Date) greater than End BBP Date.
Have any one come across this type of issue.
Can any one tell what can be the reasons for this to happen?
Also in this case there are no entries for the items in this BBP document in database table DFKKMOP.
Thanks in advance,
Hrushikesh

Hi Hrushikesh,
Could you please check the details at billing document level if any of them is having the bad data.
Also, please check the data passed and the importing data for the below FM's in debug mode.
1. START_TIME_DETERMINE
2. END_TIME_DETERMINE
I am not sure, but have heard about the similar issue in one of the project, but it was related with invoicing not specific to BBP.
Let me know the data received for the above FM's, also, will check if I can get any specific details for the same.
Regards,
Rajesh Popat

Upload rate lower than expected

I want to get the best out of our connection... predicted speed was 55/20, engineer reported 80/20 (19.5 dbs for line length?, snr up/down 15.2/11.2) with his kit yet every speed test i've tried indicates 74/16. The BTW further diagnostics gives http error 500. Leaving out the router and connecting directly to the modem doesn't change the speed.
I know some throughput is lost to overheads but 16 vs 20 is a loss of about 20%. Where I can find more stats etc.?

Check the speedtest at http://www.thinkbroadband.com/speedtest.html
That is more accurate for upload speeds.
You can find out more stats if you unlock the modem (easy with HG612, google for it, hard with ECI modem).
Also, if you unlock the modem and disable QoS you will get around 1 to 1.5Mb higher upload speeds.
I have slight line issues right now, but when things were going right I saw:
15 or 16 Mbps, fastest upload with BT wholesale tester (QoS operating)
17Mbps, upload to Thinkbroadband or 'real' backup to SquirrelSave (QoS operating)
18.5Mbps, upload to Thuinkbroadband or 'real' backup to SquirrelSave (QoS off)

Maximum Simultaneous Connections lower than 5?

XIR2 on Windows: on the webi report server, the lowest value I can use for the setting "Maximum Simultaneous Connections" is 5.
Is there any way I can change this manually, possibly in the registry so this value can be set as "1"?
Thanks in advance
R

The important thing to realize about wireless is that it's a shared medium and only one device can transmit at any one time on a given channel so the number of users per AP will depend largely on what sort of traffic you'll be putting over the wireless.
If you expecting it to replace structured cabling in an office environment then you can probably expect quite a bit of data, especially if you have a Windows domain and fat clients.
I wouldn't put more than 7 - 15 users per radio (depending on load)
If you install a dual radio AP - something like an 1142a/g/n, then you can split the users between the two frequencies (assuming that some of the clients support 802.11a) and if they support N then that's even better
For that number of users I would strongly suggest you install 3x APs (dual radio), that way you can have 3 non over-lapping channels in the 802.11g frequency and will be able to provide the best possible performance to the users
As a side note you should also connect the APs to Gigabit ports so that you get the benefit of the higher throughputs provided by 802.11n
Cheers,
John
Sent from Cisco Technical Support iPad App

Not able to view data from more than one data package in PSA

Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AM

Hi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe

Billing date comes later than PGI Date

Dear Friends
For a particular customer, billing date is getting generated two days after the PGI date. But for all other customers we are getting billing date on the same date as PGI is done. This problem is occurred soon after we have started invoicing through scheduling agreement instead of sales order. But I went to sceduling agrement , header &item, billing . There billing date is depicted same as PGI and delivery date. The TOP in customer, Bitting tab is 30 days credit. In customer billing Tab page there is no entry that can make this change in PGI and Billing date.
Pls tell me how do I make Billing date and the PGI on the same date?
Thanks
Sangeeta

Hi Sangeeta
Just check in scheduling agreement document type in VOV8 wheather you have maintained Lead time in days or not
Check in VD02->sales area data tab wheather you have assigned the standard factory calendar 01 or not . Because this might be because of the factory calendar also.As it considers weekends has holidays
Check in your shipping point details also wheather you have assigned factory calendar or not
Regards
Srinath

Upload Maximum Date Rate Lower Than Upload Data Ra...

Similar Messages

Maybe you are looking for