Upload of old/open project structures

Hi experts
Please let me know the best approach of uploading old poject stuctures in system.
Is LSMW best or custom BDC?
In case of LSMW, is it works with recording method/
In case of BDC, what way the data file for different project objects can be prepared (pd, wbs elements, network, activities etc0.
Or is it required to upload seperately for object type?
Warm regards
ramSiva

Hi,
You can use BDC's for upload of Project related objects. A BDC used to upload, say, WBSe can be coded in such a way it will accomodate structure of any hierarchy levels. Please consult with your ABAPer for this.
Regards,
Arul.

Similar Messages

Opening old Premiere Projects in Premiere Pro CS5

I have some old video projects which I've saved to disk with the idea that I could go back and edit them later. I just tried to open one of these old projects in Premiere Pro CS5 and it doesn't recognize the old Premiere Pro project. PP CS5 projects now end with *.prel or *.prproj. My old projects (some done in Premiere 6, some in PP CS) ended with *.ppj. I opened the *.ppj file properties and tried changing them from "Opens with Adobe Premiere Pro CS" to "Opens with Adobe Premiere Pro CS5", but it looks like the file suffix remains *.ppj and PP CS5 still doesn't recognize it.
Is there a way I can convert my old PP projects to PP CS5 so they can be opened/edited in my current software?
Thanks.
--Dave

David,
Per my earlier post, if you change that from All Supported Media to All Files, can you Import?
[Edit] I see that All Files did work, and that you are up and editing! That is great news.
As mentioned, the only issue that I had was with a very few 3rd party Transitions, and PrPro was nice enough to tell me exactly where these were used, and what their names were. I just wrote down those TimeCodes, added Cross-Dissolves to replace whatever the previous editor had used, and was up and editing.
Now, I did have to go through the "Where is file ____?" process, as the previous editor had drawn Assest from ALL over an external HDD, with no folder structures, or anything useful - what a kludge! I organized all of the Assets (many thousands) into logical order, and once I had re-established the links, all went beautifully.
Good luck,
Hunt
PS - the reason that I asked about platforms is that Pr was X-platofrm, but then with PrPro, through version 2.0, it was PC-only. It was not until CS3, that it went back X-platform. This created a little problem for Mac users, with newer PrPro versions, but older PC Projects. We get about 1 of these issues per year, and the answer is for the Mac user to befriend a PC-person, with the right version of PrPro, do that Import step, then Save_As, and hand off the now, X-platform version of the PRPROJ. Hey, it fosters "hands across the aisle," and we've found several PC-users, with the right versions around here, who have done that conversion, out of the kindness of their hearts. That had zero to do with your Project, but wanted you to know why I asked.
Message was edited by: Bill Hunt - Added [Edit] when I saw the last response.

Upload Project Structure or Roadmap from MS Project to solution manager

I have a project ready in MS Project .
I want to make a roadmap out of it.
How is that possible? Do I have to manually edit roadmap structure?
OR Is it possible to upload Project Structure or Roadmap from MS Project to solution manager?

Hi Hussain,
Can you please check [this|Creating new Roadmaps; thread for general overview on custom Roadmaps.
In answer to your specific question, it's not possible to create a Roadmap straight out of MS Project, in standard SolMan.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jun 5, 2008 1:06 PM

Can´t open illustrator. It says I have to upload the OLD Java SE 6-Runtime-Version. But I can´t install the old Version. What should I do?

Can´t open illustrator. It says I have to upload the OLD Java SE 6-Runtime-Version. But I can´t install the old Version. What should I do?

Lotte,
Does this help?
Win:
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Mac:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.

Trouble opening up old iDVD projects after upgrading

Forgive me if this has been discussed but I took a quick look through the messages and I didn't find what I needed.
I have some old iDVD projects that do not open under iDVD 6.01 (yes, I have the update.) It is as if my old themes (specifically "Baby Blue") have been erased. Is there some way to download them from the Apple site?
Also, if I may, I want to pick a nit about iDVD. Someone please correct me if I'm wrong, but I think it is wrong for the program to force you to use a pre-defined theme, even if it is customizable to the point of non-recognizition. If you somehow loose the old template or move the file to a new machine with no old templates, you're screwed unless you want to go through all the work of redoing your project.
Thanks.
iMac Mac OS X (10.4.5)

Many people have had troubles with older projects opening in iDVD 6...including my one left-over project that was finished.
This is one reason you should finish a project, create a disk image, save the disk image, before "upgrading."
If you somehow loose the old template or move the file to a new machine with no old templates, you're screwed unless you want to go through all the work of redoing your project.
If you creat an Archive of the project, it should contain everything you need.

Cannot open old iMovie project

I have an old iMovie project from 2008 that I cannot open.
If I double-click it, terminal opens.
Recommended applications are Textwrangler, Terminal.... not really the right thing to watch a movie.
Final Cut Pro X cannot read the file, because it's in the "bundle" format. Quicktime is also grayed out.
Is this some weird format that is no longer readable by anything? Or can I turn it into an .mp4 file?
Thanks.

iMovie doesn't support importing one iMovie project to another. When we try, we get exactly the error you quoted.
You can, however, import all the Timeline video and audio as a single clip to a new project. Or you can drag files from the Media folder of the project to the Timeline of a NEW project.
In the Finder, Control-click on the project icon and choose Show Package Contents from the popUp menu. You'll see the movie "Timeline Movie.mov" in the window that opens. You want to import that movie to a new project, or import selected files in the Media folder.
To import, drag the file to the Timeline of a NEW iMovie project. If importing the Timeline Movie, everything on the Timeline of the original project will arrive as a single clip in the new project.
If the project failed on the external drive, it may be because the disk does not use the disk format required by iMovie. Use Disk Utility to check the disk format, which must be "Mac OS Extended". If it's not that format, use Disk Utility to reformat the drive. (Which will erase all the files on the drive, so make backups.)
Karl

Opening old iMovie projects in iDVD

I'm relatively new to all this. I've made several iMovies and have burned them all through iDVD. But, when I look to re-open them on iDVD only a couple show up on my RECENT PROJECT list. The others do not. Is there a way to reopen those on iDVD? I've tried going through OPEN and IMPORT, but I can't seem to get it right. Thanks...

Sorry, I interpreted "old projects" as having come from an older version of iMovie.
I've tried going through OPEN and IMPORT, but I can't seem to get it right.
Have you tried and failed with "Open Project" in iMovie as "Open Recent" only holds the most recent and holds none after a delete of preferences.
Have you tried locating them in Finder and going within the Project folder, either to double click on the project file or using "Open with"

Opening old iMovie projects in new iMovie HD

I have a few old iMovie projects from around 2001/2002 on an external hard disk. If I try to open them, they won't open in iMovie. Instead it would give a "Parse Error". The folder looks something like this:
Is there a way I can open these projects? I can open the single clips by adding .dv as an extension, but then I'd have to rearrange/remix everything again which I don't want to do.
Thanks and best regards,
C.

It seems as your external disk is not Mac-formatted (Mac OS Extended), but PC-formatted (FAT32).
First copy your files over to a disk that is Mac-formatted (Mac OS Extended).
Then you apply my file fixers a bit down on this page:
http://www.berga.nu/%7Eusrlt/imovie/index.html

Opening Old iMovie Projects

I have many, many old iMovie projects that I would like to open in iMovie HD. Is there any way to do this? The only thing I've been able to do is open a new iMovie HD and drag old media files to the clips pane.
LaVonne

Hi Stephen,
Your memory is probably better than mine but I would go as far to say that you can probably open them with iMovie HD 5 without much ado just not on your intel or any machine running 10.3.9 with QT 7 as things have changed considerably with that combination. If you have or have access to a computer running 10.3.9 or earlier with QT 6.5 or earlier you should be golden provided you didn't save anything while it was opened in 6..
It's not that I am saying timing is my only problem though either. But It appears to be the cause of why things aren't working correctly and that iM keeps trashing files as nothing is making sense to the timeline anymore and projects created before the 3.9 & 7 combo had no clue what a graphics card even was and now that is the only way they are being processed. Don't get me wrong I do like my Intel but the PPC was a different beast altogether as it was capable of doing things the Intel never could and never will as it doesn't need to and can do what it does best allowing your graphics card to do what it does best as well. They just aren't in sync causing issues in any areas and not just iMovie.
If you do not need to re-edit you may be able to open the timeline movie in iM6 instead of opening the project though I am not sure how this will work in the long run as it will only be a reference movie and require the original to work.
Hope this helps. Please let us know how if it works out for you.
Thank You.
Sweet Polly

I can't open old IMovie project done with ILife09

I can't open old IMovie project done with ILife09 on my new MacBook Pro Retina with Lion Mountain system.

you can't just move a project that way. It all needs to be contained properly. If you can find the original imovieHD project folder, you can start again.

Migration of costs & revenues of open projects

Dear All,
I am new to CO & migrating the costs & revenues of open projects from old SAP system to new SAP system.
For costs & revenues of open WBSs/Network activities, we have three programs:
1. primary costs extraction & upload
2. secondary costs extraction & upload
3. revenue data extraction & upload
For primary costs, i am referring to table COSP and secondary costs COSS.
Incase of secondary costs, i am not sure what all the values i should consider
In COSS - i have cost center allocations - which need to be migrated through KB21N, with total qty & UOM
and also i have network activities settlements...do i need to consider this as well to get the value matching with WBS value in CJI3.
If yes, how do i migrate the network settlements? definetly not through KB21N.
Kindly clarify as i am not able proceed further on this.
Thanks in advance
Gangadhar

When you say migrating from old SAP system to new SAP system, do you mean, you are in a upgrade project? If it is an upgrade project, you need worry to transfer data. The technical upgrade would address the need of data migration.
If it is entirely a new different system and you are planning total re-engineering, you may only want to post primary costs and redo the allocations and settlments.

How to open projects within a zip file?

Is there any way to use the open project feature to open projects within a zip file loaded onto a LMS? I have several files loaded in a zip file and I would like to navigate to each one within the zip file itself. The problem that I see is that it does not know where to look. Within the zip file, there is a main menu file that is used to branch out to another project file and then the user will go back to the main file to navigate to another. I know this seems complicated, but I am being asked to see if this is possible.

A zipped SCORM package is always unzipped on the LMS server after upload. So you need to look at the file and folder structure of the SCORM after it was unzipped to see how to navigate or link to other elements.
However, let me just say that what you are trying to do will almost certainly cause you many headaches. A multi-SCO SCORM package is meant to be comprised of several individual SCO modules that do not usually talk to each other because by definition in the SCORM standard they are supposed to be standalone and not require anything else to play.
Additionally, a multi-SCO package uploaded to an LMS is intended to allow the LMS to control navigation to individual SCO modules via the TOC links that the LMS creates in its own SCORM player. Once you start over riding these links and opening up individual SCOs without using the TOC links you run the risk of confusing the LMS as to which SCO is actually playing. The SCORM API only wants to deal with one SCO at a time.

Impossible open project Premiere CS3

Hello, sory for my english, I´m from Czech republic.
I have got a big problem. I can´t open project in Adobe Premiere CS3(update 3.2.0). I worked on this project more than 5 mounts. During loading the project Premiere show message "p:\drusilla\pro\3.2.0\mediacore\mediafoundation\ap i\inc\Keyframe/Keyfrarr.. and than crash.
I tryed everithing I know: Autosaves not work, import to new project, reinstal program and windows, open offline....
Project is very big - 97 Gb.
I have Windows XP Pro SP2 with CZ lokalizacion. Smaller projects work fine, without any problem.
Please help me, Johny A.

Johnny A,
Lets do a review:
You had a Project that has been worked on for five months and all worked fine. The Project opened in PP perfectly over that time. You then recorded a WAV into PP, edited some more, and now your Project will not open, and you get the error message. Did the Project function properly, after you recorded the WAV, before you Saved and shut down? If not, what seemed to be happening then?
You have attempted the following:
1.) Open Project in PP - result does not Open and gives error message, followed by crash
2.) Open all AutoSaves - result does not Open and gives error message, followed by crash
3.) Started a new Project with the same specs. as your old and tried to Import the original Project into it - result does not Import and gives error message, followed by crash
[Good things to try, BTW]
Does the info in this link help:
Eddie Lotter, "import failure - error message 1231" #1, 11 Jan 2009 1:19 pm
Has anything changed on your P:\ drive? What are the specs of your P:\? How is it connected, internal, external FireWire, USB, etc.?
One thing that you might try would be to Move all of your Assets to a new location, especially the WAV file(s). Try to Open your Project again. As you have hidden the Assets from PP, it should ask you to locate them again. If you kept the same folder structure, but just hid the structure, you should be able to help PP locate the files and let it load them up again. Id make sure that I hid the WAV file(s) even further away in the folder structure, so you can *possibly* get the rest of your Project loaded, and just Offline the WAV file(s) for now. Then, do a Save_As, or Save_As_a_Copy (without the WAV file(s). If you get the Project back to that state and Open, then try to re-Link the WAV file(s). Have a look at:
http://www.adobeforums.com/webx/.59b78a80/7 if you have any questions about Save, Save_As etc., and why/when you might choose one, over the others.
Last, there is a freeware program, XML Wrench. It can do a lot of detective work on your .PRPROJ file. Ive only used it sparingly, but others here can step you through its operation. First, however, I would download and install it. Run your PRPROJ though it and report back with what it says. Usually, a corrupt file will have bad header info. If this is the case, others can possibly direct you with way to repair that header info. There could also be some other problem, that folk here will recognize and help you cure.
Good luck,
Hunt

Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142

Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda

Unable to open project files can filters effect this ?

Hi Guys ! I have been a long time reader of the forums and from just observing have always learned a great deal from the discussions. Up until now I have been able to read through post and always find an answer from some of the great advice. As a relatively new Final Cut Editor I have limited knowledge but can edit and have learned enough to structure my work flow and put a project together how I would like it and complete with good results.
I have read a few post on this subject “Unable to open project file” but haven’t seen any with the specifics as my own.
Up until yesterday my files were opening all fine and working perfectly until this last night I had saved and shut down my Mac in the normal fashion. When I tried to open two specific files I was greeted with the infamous “Unable to open Project Files”. These as I can gather are the only two files that will not open and both files have used the RIVER ROCK– Chromatic Glow, or Day for Night Free downloadable Filters in the last 2 weeks could this be the reason ?
I have all the recent updates and have tried going into the Auto Vault and Render files to access the last available versions of these project files. I am able to access those but am only left with a much earlier version of the same project like a version a week earlier without vital changes.
So I would pretty much have to start again.
Any Help would be greatly appreciated
Regards
FC

Hi Tom thanks very much for your reply! , I un mounted the external drive , and reset and created a temporary scratch disk on My Hardrive to get Fce to start.
The 3 projects I have been working on which all were rendered on the 2nd of April around 3 in the afternoon. Two of the Files using the River rock filters are Not accessible from the most recent and up to date versions. The one remaining Project is able to be opened and is the only one not using the filters.
The two files accessed from the auto save vaults before April 1st up to 3pm April 2nd are working and are able to be opened with no problem. Everything after that is not opening which is a real downer as its where the project became near completion but at least I have a time frame of when things started to go wrong.
What would you suggest?

Upload of old/open project structures

Similar Messages

Maybe you are looking for