Upload problems with Facebook and Vimeo from Premiere Elements 10

I have created a project in HD and am trying to upload to Vimeo. Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website. Project is "blurry" when viewed. I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect. Can anyone give me the correct presets for Vimeo from Premiere Elements 10. I can view other people's video in HD and they look fine so I don't think it's my computer monitor. I'm sure you will need more information about my project so please give me a list of specific things you need to know. Thank you.
My Facebook problem is as follows. If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected. Problem is, I would like to upload to my business page. Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page. Does anyone know the values of the preset so I can upload the video to my business page. My business is event and wedding videography so I would like the posts to be as clear as possible.
If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook. Thank you.

VDRAVES
I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
Please see
Share/Computer/AVCHD with Presets = Vimeo HD
Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
In all cases, watch for file size versus bitrate versus quality of end product.
Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
Please review and let us know the outcome.
Thank you.
ATR

Similar Messages

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Uploading problem with Ebay and Dreamweaver MX

I am unable to sync websites with Dreamweaver MX 6.01. When I connect to the remote server, it shuts down the program. I have reinstalled the program, but it still does it. Also, when I use Safari, Opera, and Firefox to upload photos on Ebay, the upload process fails completely, and blows me directly into My Ebay, as if I was not on the selling page at all. I have to go to my PC to do the photo uploads. Seems like it may be a related issue, some kind of uploading problem with Rosetta, or something. I am using a Macbook Pro with the 2.0Ghz processor, connected with ethernet cable, and firewall is set to off. Any ideas?

For E-Bay you might try the following:
Type the following command in Terminal (while Safari is NOT running):
defaults write com.apple.Safari IncludeDebugMenu 1
Then launch Safari, and you will be able to use the new Debug menu.
If you ever wish to disable it again, just repeat the command with a "0" instead of a "1".
Under the Debug menu, you'll see the User Agent sub-menu; select Windows MSIE 6.0 from the list and then try connecting to your web site
Dreamweaver you might need to update your version.
To Dreamweaver 8.01
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=f56452a8

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature

Hi all,
I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes. Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
Best regards,
Ellie

John,
The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
To the OP - Good luck,
Hunt

Problems with facebook and YouTube

Okay, so I upgraded my MacBook pro (early 2011) to mountain lion, and everything worked fine, it was also faster than lion. The problem is that yesterday I had troubles with facebook, the tab where I was got blocked and since that moment I can't log in to facebook, YouTube and other sites in any browser, I've tried all of them. It happened while I was usin chrome but safari, Firefox, opera, they don't work unless I set the private browsing. I don't know what to do, please help me.

I had ths problem to and found out how to fix this here are some steps to fix it.Type on your keyboard ctrl+shift+delete (hold control shift and delete at the same time) after you press these keys a pop-up will come up saying "Clear All histroy" at the top where it says "time range to clear" select Everything after that underneath Details at the bottom check all the boxes off the list then click "Clear Now" (I attached a picture to show what it should look like you can see the picture at the bottom of this post)the the problems should be cleared with youtube and facebook
***By the way firefox doesn't force you to update you don't have to update firefox if you don't want to***
All the help from-
Spencer4757
I helped you, can you help me by visiting my websites and other sites:
My Website: http://www.spenceriscool.co.cc/
My Youtube channel: http://www.youtube.com/spencer4757
Twitter Fan Page : http://twitter.com/#!/spencerizcool
Facebook Fan Page : https://www.facebook.com/pages/Spencer-Is-Cool/120710047950205

Problems with image and audio in Premiere

Hi! I'm using Premiere Elements 9, but there's no synchronization with imagen and audio because the image is slower than audio and it's causing problems when I'm editing. Why can I do? It's there a poblem that can I fix in "Preferences" or is my laptop?
I hope your answer,

When you do post the PrE forum, this ARTICLE will give you tips on the types of info, that will be so useful. See you there!
Good luck,
Hunt

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Problems with facebook and loading page in Safari

When I am chatting on facebook and try to click around on the page, most specifically when I have other tabs running on Safari, facebook will not completely load and i will get the spinning cursor on the facebook tab that will not go away. It continually tries to load with no success. I have to close the window and open a new one for it to go away. It only seems to happen when I am chatting with people on facebook chat...any suggestions?

Ok...
Time to get out your install disc, run the Disk Utility app and check the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 15% free space.*

Problem with ID and download from app store:computer or device could not be verified

Hello.I have mac and i had one game from app store,but one day i couldnt open it,it ased me to ented my App ID and password,,,i did but it wrote to meYour device or computer could not be verified. Contact support for assistance. I allready chande my password and mad ned ID but nothing works.....the same problem.how can i download from app store again.thanks

Try a forum more suited:
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store?view =discussions

Problems with Facebook and theater mode

When a photo is clicked on Facebook, the theater mode appears normally but the original page scrolls up randomly. Is there a fix for this?

Hannes.S wrote:
Hi tjk,
thank you for your reply.
I will do that, if there is no other solution. I just thought, it'll be better to know what's the problem with my mac...
But probably you're right, this will be the best solution.
The repair techs would be the best person to ask that.

Problem with the preview window in Premiere Elements 10

Hi guys,
I have a question:
I have a new PC (data follow) and Adobe Premiere Elements 10.
My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
PC:
AMD FX-8350 Eight Core Processor 4 GHrz
NVIDIA GeForce GTX 750 Ti
Do you need even more?
What I have already tried:
- Adobe Premiere Elements 10 anew inst.
- Graphics drivers update
- Check DirectX
- Windows Media Player and QuickTimePlayer anew Inst.
Already to many thanks for your help!!!!!
lg
Börni

borni123
What computer operating system is your Premiere Elements 10 to run on?
You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
in the Announcement at the top of this forum. Copy for your convenience below.
You gave a lot of details but did not include the computer operating system. This information may be the key whether
the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
specific for Premiere Elements 10 and the NVIDIA GeForce cards.
Copy of Announcement at top of this forum....
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
available to you.
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
Please update us on your progress,
Thank you.
ATR

Problem with polish diacritics in Adobe Premiere Elements 9.0 PL

Hello,
I bought the Adobe Premiere Elements 9.0 PL software one week ago.
This version is dedicated to polish region, so I was very surprised
when I couldn't enter polish diacritics characters in the title
editor.
When I pressing AltGr (right ALT) button with one of the additional
letter (i.e. o, a, l, c) nothing happening. But when I pasting text
using system clipboard everything is OK. I think that issue is caused
by ALTGr key binding with some function in Premiere. Unfortunally when
I removed all keyboard shortcuts in Premiere keyboard configuration
menu the problem is still appearing. Can you help me to resolve it?
My system configuration:
- Sony VAIO VPCF1 notebook,
- Intel Core i7 740QM processor,
- 8GB RAM memory,
- 128GB SSD drive,
- Windows 7 Home Premium PL (polish version) 64-bits.
Best regards,
Maciek

Thanks for quick answer.
Does your font character set support the Diacriticals?
Yes. I have also Photoshop and Illustrator CS3 and everything works fine with text edition using diacriticals fonts.
Have you tried using the Alt+ [numerical characters] on the Number Pad (NumLok ON)?
It doesn't work. After pressing AltGr button I have somethnig like a frame around the text box (as below) and I cannot enter any character.
So far Copy/Paste is the only way
Maciek

Is there a problem with the 32bit installer for Premiere Elements 10.0?

When i download and unzip the program there is not setup.exe in the folder. There was no problem with the 64bit version.

Have you already installed Premiere Elements? If so there is no need to try to install the 32-bit version. The installer detects and installs the version appropriate to your operating system.

Upload problems with Facebook and Vimeo from Premiere Elements 10

Similar Messages

Maybe you are looking for