Upload Process Flow to detail Submitter and Reviewer using some mechanism

Hi All
In creating the process flow, we have to feed details of the person who inputs data and who reviews or approves/rejects the data. The only way I know to do this very manual, to feed in the name of the submitter/reviewer one by one against all lines shown.
Is there an Excel upload or some other functionality to it in a more efficient manner?
Thanks
AJ

Rembrandt,
Did the two updates to Office 2011 get you to 14.3.9? That's the latest Mac version of Office.
I use Office 2013 and Mac Office 2011 on the same machine and have no problems opening any files shared between the two. You followed the instructions for uninstalling and updated your new installation correctly, I have to assume. It sounds as if there is a problem with your cuurent configuration but if it's not an update problem, or an installation problem, I can only direct you to the MS Office for Mac user community -> http://answers.microsoft.com/en-us/mac (sometimes you get lucky and get an actual MS employee answering your question).
Good luck,
Clinton

Similar Messages

  • Process flow of capital project and indirect project

    Hi ,
    Can anybody provide me some document related to the process flow of capital project and indirect projects .
    Thanks/vinay

    Hi Vinay,
    If you found any document related to capital projects please share with me also.
    Thanks
    Sreenath

  • VLD-10005:  The following path in this process flow is a loop and may cause

    Hi,
    [The following path in this process flow is a loop and may cause the process to loop infinitely..]
    The messages comes under following scenario
    S -> Map1 -> Error -> OR1
    Map1 -> Map2 -> Error -> OR1
    OR1 -> End_ERROR
    Map2 -> End_SUCCESS
    Any reasons?
    OWB 9.2.0.2
    The same works in another Process Flow.
    the intention is to let the Process Flow continue when there is no error, and branch to a common email when an error occurs (instead of creating separate email activities)
    - Jojo

    Thanks for that answer. Unfortunately, we donot have a very good inclination (read that as image) for OWB here. So we are still on 9.0.2. So will live with the bug, and ignore the warning.
    Message was edited by:
    Jojo

  • Process flow stuck while execution - Fork being used

    Hi,
    We are using fork feature in the process flow. Three mappings are being forked; if all the 3 are successfully completed, then the 'END_SUCCESS' needs to be reached. This is done by routing the success transition from 3 mappings to the 'AND' process and then from 'AND' to 'END_SUCCESS'. If any one of the mapping fails, the 'END_FAILURE' needs to be reached. This is done by routing the success transition from 3 mappings to the 'OR' process and then from 'OR' to 'END_FAILURE'.
    When this process flow is executed, 2 mappings are successfully completed; the third one is completed with errors. While viewing from workflow monitor, the success routes are clearly shown but the failure route is not shown. In the runtime audit browser, the mapping details are correctly shown (2 mappings with success and the third one with failure). The process flow is shown having a status of 'BUSY'. The process flow keeps on waiting and does not get completed/aborted automatically.
    Is there something which I have missed in the process flow?
    Thanks in advance,

    Reposting as there was a mistake in my previous posting:
    Hi,
    We are using fork feature in the process flow. Three mappings are being forked; if all the 3 are successfully completed, then the 'END_SUCCESS' needs to be reached. This is done by routing the success transition from 3 mappings to the 'AND' process and then from 'AND' to 'END_SUCCESS'. If any one of the mapping fails, the 'END_FAILURE' needs to be reached. This is done by routing the failure transition from 3 mappings to the 'OR' process and then from 'OR' to 'END_FAILURE'.
    When this process flow is executed, 2 mappings are successfully completed; the third one is completed with errors. While viewing from workflow monitor, the success routes are clearly shown but the failure route is not shown. In the runtime audit browser, the mapping details are correctly shown (2 mappings with success and the third one with failure). The process flow is shown having a status of 'BUSY'. The process flow keeps on waiting and does not get completed/aborted automatically.
    Is there something which I have missed in the process flow?
    Thanks in advance,

  • How to read text and it's font details (Family and size) using Acrobat plugin?

    Hello,
           I have query about reading PDF, I wanted to extract text and it's font details (Family and size) using Acrobat plugin. How can I achieve that?
    Any suggestions are welcome.
    Thanks
    Rohit Shinde

    Look at the samples in the SDK around PDFEdit and the PDEdit APIs.

  • OWB 10gR2 Process Flow returning status = Complete and Result = Null

    Hi,
    I have a process flows i ran lot of times with success (it shows status = complete and result = OK). It invokes a lot of mappings and other flows
    Sometimes one of invoked mapping or flows shows status = complete and result = Null and main process too.
    The main process i invoked by a PLSQL store procedure using wb_rt_api_exec package. When status = Null the store procedure hangs and I have to kill it.
    When it happens, owb service restart (new record in WB_RT_SERVICE_JOB_LOGS).
    Can anyone help me?
    The configuration that I am working with is as below ---
    OWB client version : 10.2.0.1.31
    OWB repository version : 10.2.0.1.31
    Oracle Workflow Version : 2.6.4.0.0
    Database version : 10g Enterprise edition release 10.2.0.3.0

    Sometimes transitions in process flows get scrambled and you have to fix them by hand.....this happens and I dont know why.
    Basically what happens is: every operator in process flow has three outgoing transitions (in general) marked as 0, 1 and 2, when you take a look at details property of your operator then in the outgoing transitions tab you should have ORDER collumn 0, 1, 2 for warning, error and success.
    If this is not the case (0,1,2) process will not know what to return as value, and what is more bizzare this works until it does not :)
    I dont know if this is your case but it's worth checking.

  • Process Flow developing/deploying/executing and scheduling through OEM

    I have installed OWB92 and Oracle 9i, OEM configured, Oracle workflow 2.6.2 installed. I know OWB and scheduling mapping from OEM.
    I have created two mappings and a process flow. I want to schedule process flow from OEM. After creation of process flow, while I deploy it ask for a user/password/port/sid/host. I want to know which user I need to enter here.
    If anybody help me out in the this regard providing the detail steps.
    Thanks in advance.
    Liyakat

    Hi Henrik,
    After deploying the process flow, I am getting the following error:
    RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link R2MIS.US.ORACLE.COM@WB_LK_PACK1. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
    - ORA-06550: line 1, column 7:
    PLS-00201: identifier '[email protected]@WB_LK_PACK1' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    OWB runtime is available.What I need to do now?
    Thanks and Regards,
    Liyakat

  • Process flow between edit ,renderlistitem and show form in XML form builder

    Hi all ,
    i'm building from in xml from builder . i'm confused with the process between edit ,renderlist item and show froms .can any one please explain me the Process flow between those
    thanks,
    rajeev.

    Hi Rajeev!
    There is no process flow between those forms. They are seperate views of the same document, nothing more.
    The Edit form is always used if you create or edit a xml document based on the form.
    The renderlist item form is used if more than one XML document is shown, for example in a list.
    The show form ist used if the document should be displayed in full, eg by clicking on an XML document in a list.
    It is even possible to add more custom forms and display them. If you "preview" an XML document, you get the choice to display the document with all display forms available (default Renderlist item and Show). If you watch the URL when previewing a xml document you'll see an URL parameter selecting the form to show.
    Regards,
      Jürgen

  • Process for exporting in FCPX and then using MPEG Streamclip to downgrade?

    I have footage shot with a 5Diii, and it is set at 1920x1080, 23.98p.
    When I export through FCPX at H.264, it gives me a beautiful master file, but is larger than the 4GB that I need.
    What is the process for using MPEG Streamclip to get a smaller file?
    Do I export a master file in FCPX first using a different codec, and then use MPEG Streamclip to compress it? If so, what would be the best setting to export from FCPX, and then what would be the best setting to compress at in MPEG streamclip?
    My goal is to be as close to 1080HD as possible.

    Here is the background story....... I provide movie files on a DVD delivery (files in SD quality) and then also give a copy of the same films on a flash drive so clients can have it in HD quality, and plug the flash drive directly into the TV.
    This always worked fine in the past until I ran into a movie file that is 4.7GB, and would not copy onto the flash drive, since flash drives only accept files up to 4GB.
    So I tried reformating the flashdrive to exFAT. It allowed me to copy the 4.7GB on the flashdrive, but when I tried plugging it in directly to the TV, the TV did not recognize the drive. (I learned that exFAT is not always compatable with all TVs.)
    My other option would be to download an app to let me reformat the drive into NTFS which accepts files bigger than 4GB, and supposedly works better with TVs. I haven't tried this yet because I am worried that downloading that app might mess up my computer. ???????
    So....I have come to the conclusion that the only other thing I can do is compress the 4.7GB file to be 4GB (or less) so it will fit on the flash drive which I believe had an original format was MS-DOS FAT.
    Are you suggesting instead of exporting the file from FCPX in H264, I should do it in ProRes? The file will be much larger than 4GB, but, then I can compress it, without losing as much of the quality as I would if I compressed an H264 file? Either way it needs to be 4GB or less, so I don't know if that defeats the purpose of using a ProRes file to begin with.
    Thank you so much for helping with this!

  • I think I've got a memory leak and could use some advice

    We've got ourselves a sick server/application and I'd like to gather a little community advice if I may. I believe the evidence supports a memory leak in my application somewhere and would love to hear a second opinion and/or suggestions.
    The issue has been that used memory (as seen by FusionReactor) will climb up to about 90%+ and then the service will start to queue requests and eventually stop processing them all together. A service restart will bring everything back up again and it could run for 2 days or 2 hours before the issue repeats itself. Due to the inconsistant up time, I can't be sure that it's not some trouble bit of code that runs only occasionally or if it's something that's a core part of the application. My current plan is to review the heap graph on the "sick" server and look for sudden jumps in memory usage then review the IIS logs for requests at those times to try and establish a pattern. If anyone has some better suggestions though, I'm all ears! The following are some facts about this situation that may be usefull.
    The "sick" server:
    - CF 9.0.1.274733 Standard
    - FusionReactor 4.0.9
    - Win2k8 Web R2 (IIS7.5)
    - Dual Xeon 2.8GHz CPUs
    - 4GB RAM
    JVM Config (same on "sick" and "good" servers):
    - Initial and Max heap: 1536
    -server -Xss10m -Dsun.io.useCanonCaches=false -XX:PermSize=192m  -XX:MaxPermSize=256m -XX:+UseParNewGC -Xincgc -Xbatch -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.dotnet.disableautoconversion=true
    What I believe a "healthy" server graph should look like (from "good" server):
    And the "sick" server graph looks like this:

    @AmericanWebDesign, I would concur with BKBK (in his subsequent reply) that a more reasonable explanation for what you’re seeing (in the growth of heap) is something using and holding memory, which is not unusual for the shared variables scopes: session, application, and/or server. And the most common is sessions.
    If that’s enough to get you going, great. But I suspect most people need a little more info. If this matter were easy and straightforward, it could be solved in a tweet, but it’s not, so it can’t.
    Following are some more thoughts, addressing some of your concerns and hopefully pointing you in some new directions to find resolution. (I help people do it all the time, so the good news is that it can be done, and answers are out there for you.)
    Tracking Session Counts
    First, as for the observation we’re making about the potential impact of sessions, you may be inclined to say “but I don’t put that much in the session scope”. The real question to start with, though, is “how many sessions do you have”, especially when memory use is high like that (which may be different than how many you have right now). I’ve helped many people solve such problems when we found they had tens or hundreds of thousands of sessions.  How can you tell?
    a) Well, if you were on CF Enterprise, you could look at the Server Monitor. But since you’re not, you have a couple of choices.
    b) First, any CF shop could use a free tool called ServerStats, from Mark Lynch, which uses the undocumented servicefactory objects in CF to report a count of sessions, overall and per application, within an instance. Get it here: http://www.learnosity.com/techblog/index.cfm/2006/11/9/Hacking-CFMX--pulling-it-all-togeth er-serverStats . You just drop the files (within the zip) into a web-accessible directory and run the one CFM page to get the answer instantly.
    c) Since you mention using FusionReactor 4.0.9, here’s another option: those using FR 4 (or 4.5, a free update for you since you’re on FR 4) can use its available (but separately installed) FusionReactor Extensions for CF, a free plugin (for FR, at http://www.fusion-reactor.com/fr/plugins/frec.cfm). It causes FR to grab that session count (among many other really useful things about CF) to log it every 5 seconds, which can be amazingly helpful. And yes, FREC can grab that info whether one is on CF Standard or Enterprise.
    And let’s say you find you do have tens of thousands of sessions (or more). You may wonder, “how does that happen?“ The most common explanation is spiders and bots hitting your site (from legit or unexpected search engines and others). Some of these visit your site perhaps daily to gather up the content of all the pages of your site, crawling through every page. Each such page hit will create a new session. For more on why and how (and some mitigation), see:
    http://www.carehart.org/blog/client/index.cfm/2006/10/4/bots_and_spiders_and_poor_CF_perfo rmance
    About “high memory”
    All that said, I’d not necessarily conclude so readily that your “bad” memory graph is “bad”. It could just be “different”.
    Indeed, you say you plan to “look for sudden jumps in memory usage“, but if you look at your “bad” graph, it simply builds very slowly. I’d think this supports the notion that BKBK and I are asserting: that this is not some one request that “goes crazy” and uses lots of memory, but instead is the “death by a thousand cuts” as memory use builds slowly.  Even then, I’d not jump at a concern that “memory was high”.
    What really matters, when memory is “high” is whether you (or the JVM) can do a GC (garbage collection) to recover some (or perhaps much) of that “high, used memory”. Because it’s possible that while it “was” in use in the past (as the graph shows), it might no longer be “in use” at the moment . 
    Since you have FR, you can use its “System Metrics page” to do a GC, using the trash can in the top left corner of the top right-most memory graph. (Those with the CFSM can do a GC on its “Memory Usage Summary” page, and SeeFusion users can do it on its front page.)
    If you do a GC, and memory drops q lot, then you had memory that “had been” but no longer ”still was” in use, and so the high memory shown was not a problem. And the JVM can sometimes be lazy (because it’s busy) about getting to doing a GC, so this is not that unusual. (That said, I see you have added the Xincgc arg to your JVM. Do you realize that tells the JVM not to do incremental GCs? Do you really want that? I understand that people trade jvm args like baseball cards, trying to solve problems for each other, but I’d argue that’s not the place to start. In fact, rarely do I find myself that any new JVM args are needed to solve most problems.)
    (Speaking of which, why did you set the – xss value? And do you know if you were raising or lowering it form the default?)
    Are you really getting “outofmemory” errors?
    But certainly, if you do hit a problem where (as you say) you find requests hanging, etc., then you will want to get to the bottom of that. And if indeed you are getting “outofmemory” problems, you need to solve those. To confirm if that’s the case, you’ll really want to look at the CF logs (specifically the console or “out” logs). For more on finding those logs, as well as a general discussion of memory issues  (understanding/resolving them), see:
    http://www.carehart.org/blog/client/index.cfm/2010/11/3/when_memory_problems_arent_what_th ey_seem_part_1
    This is the first of a planned series of blog entries (which I’ve not yet finished) on memory issues which you may find additionally helpful.
    But I’ll note that you could have other explanations for “hanging requests” which may not necessarily be related to memory.
    Are you really getting “queued” requests?
    You also say that “the service will start to queue requests and eventually stop processing them all together”. I’m curious: do you really mean “queuing”, in the sense of watching something in CF that tells you that? You can find a count of queued requests, with tools like CFSTAT, jrun metrics, the CF Server Monitor, or again FREC. Are you seeing one of those? Or do you just mean that you find that requests no longer run?
    I address matters related to requests hanging and some ways to address them in another entries:
    http://www.carehart.org/blog/client/index.cfm/2010/10/15/Lies_damned_lies_and_CF_timeouts
    http://www.carehart.org/blog/client/index.cfm/2009/6/24/easier_thread_dumps
    Other server differences
    You presented us a discussion of two servers, but you’ve left us in the dark on potential differences between them. First, you showed the specs for the “sick” server, but not the “good” one. Should we assume perhaps you mean that they are identical, like you said the JVM.config is?
    Also, is there any difference in the pattern of traffic (and/or the sites themselves) on the two servers? If they differ, then that could be where the explanation lies. Perhaps the sites on one are more inclined to be visited often by search engine spiders and bots (if they sites are more popular or just have become well known to search engines). There are still other potential differences that could explain things, but these are all enough to hopefully get you started.
    I do hope that this is helpful. I know it’s a lot to take in. Again, if it was easier to understand and explain, there wouldn’t be so much confusion. I do realize that many don’t like to read long emails (let alone write them), which only exacerbates the problem. Since all I do each day is help people resolve such problems (as an independent consultant, more at carehart.org/consulting), I like to share this info when I can (and when I have time to elaborate like this), especially when I think it may help someone facing these (very common) challenges.
    Let us know if it helps or raises more questions. :-)
    /charlie

  • Fill additional details street2 and street3 using program rfbikr00

    I am using the program rfbikr00  for creating vendors.
    I want additonal fields like street2 and street3.
    But the standard program does not have the provision.
    can u please provide me the solution to get this done.

    Hello,
    For additional address fields you need to run an extra migration step that is explained in the online help of the program you mention.
    Small extract:
    There are additional address fields available due to linking the customer and vendor master and the respective contact persons to central address management. This additional address information is stored in central address management's own tables rather than being kept in the actual master tables (KNA1 for the customer master, LFA1 for the vendor master, KNVK for the contact persons).
    A separate transfer run via the ALE interface is needed to transfer this additional address information. This run should be before the transfer run for master data.
    See Transfer of address data.
    Transfer address data
    You can use the DX Workbench (transaction SXDA) to transfer address data.
    Create a transfer project using the following object types:
    BUS4001 for company and organization addresses (for example, customer address, vendor address, other office address of contact person)
    BUS4002 for private addresses (of contact person)
    BUS4003 for office addresses (composite work address of contact person).
    The address data is entered by the SAVEREPLICA-BAPIs of these three object types.
    For more information about these BAPIs and their interfaces, in particular the meaning of the key fields, see  "Distributing addresses via ALE" by choosing Basis --> Basis Services/Communication Interface --> Business Address Services in the SAP Library.
    You can create example files for the DX Workbench from existing address records in the system (for example, in a customer master record ) with the programs RSDXBUS4001, RSDXBUS4002 and RSDXBUS4003. These example files show the meaning of all fields in the Business Address Services BAPI interfaces.
    The programs have the same input parameters as the SAVEREPLICA-BAPIs.
    Success
    Wim

  • Hi Every1, I am new here and could use some advice!

    Any1 out there have any suggestions for some1 who shares a Verizon account with a control freak future-ex who behaves like he is punishing me for not< "snapping to" when ordered to do so?
    See, he went out for a drive one night to clear his head! He came home the next day at about the time when he knew I had a doctors appointment. He ran out on our son and I and moved in with his girlfriend! I didn't know he had a girlfriend!!! My son and I were crushed and felt discarded. Well, we got over that and now having problems because when future ex left us, he made himself manager of the account which requires permission from him to do almost anything.  Both, our son and I have asked for permission and in the case of our son, help resolving an issue with the smart phone he is having trouble with! He behaves like the typical control freak! Initially, he was going to peel off of our original account and open an account of his own. But I am betting he found out if he separated himself from our/my Verizon account, he would loose our grandfathered unlimited data plan!
    The future ex also upped the minutes on this account to 1400 minutes a month and it's really annoying because he was always in our faces about not going over our shared 700 minutes for the last seven or eight years. We all, at one time or another, went over on minutes and we temporarily had to up our minutes for that month we went over. As soon as that billing period was over, he would make certain that he switched the minutes back ASAP.
    Anyhow, he will not give permission for us to do anything in that account. That includes me being able to register a replacement phone that I had to purchase because I blew the screen out and who knows what else, on my incredible on Christmas Eve when I dropped it on Sam's Club cement floor and the phone case basically exploded! Well, funnily enough, the phone itself still charges thru USB connected to the desktop. It also rings when a call comes in and alerts when i get vm. I can hear it linking to the desktop with the two note bong bing or disconnecting it from the desktop and it alerts with the bing bong. It also syncs with the computer because it was set to sync before I killed it! It doesn't respond to anything to do with the screen but I suspect the impact snapped something on the case, not just the screen not illuminating!
    If I could afford to, I would open my own account and chalk it up to experience...just to make things a bit more stressing for me, his income was two-thirds of our total income and he will only pay for the Verizon account, our homeowners insurance and his home depot card. That is until recently when I told my financial institution that I had canceled my draft for the automobile insurance and had the financial institution contact him, as well as the insurance company, to tell him that I have it in writing, from when he first left, that he would pay both insurance payments. He attempted to let all that go by because I wound up with other troubles as my social security check was cut almost in half by an error in their system which has left me upside-down by $809 and cost me approximately $690 in NFS fees against my account! Social Security is the only income I have as I am disabled and have a hard time going out to get groceries! Being without my smart phone has been a real challenge as there are some days when I cannot get out of bed! Watching television all day is depressing to me when I don't have a choice!
    Sorry this is so long but I want to make certain I don't omit anything and misrepresent myself and cause anybody to go, "hey, why did she say that"! Yeah, that is what happens when you choose to live with an abuser! Five nights after he left, he came to pick up some of his property and brought his girlfriend with him. Not arrogant at all! That instigated an atmosphere of non-cooperation from me and some things happened! I will spare you all the details because there were too many! He wound up assaulting me and two teenage boys who were helping me carry his stuff out to the sidewalk, as agreed upon by both my husband and myself in advance. After he assaults us, he called the cops, I cannot figure out why other than to say he always feels like he is justified doing anything he pleases. The cops wound up arresting him for assaulting us! He had all kinds of trouble after that and although I told him I didn't press charges and neither did the boys. The State, County and Town did. No non-sense policy here and he was dumb enough to call the police after assaulting three people and ever since then, he won't cooperate on anything for me!
    I hope some1 can help me! I did call Verizon and explain the situation but they keep telling me they can't do anything to help me because of the privacy act!
    So I am stuck without a phone and I feel really vulnerable without it!
    Thanks for reading this and i promise to be short and sweet in the future!

    difinka wrote:
    Any1 out there have any suggestions for some1 who shares a Verizon account with a control freak future-ex  ...
    So I am stuck without a phone and I feel really vulnerable without it!
    I agree with jim, there's no need for all the details.  If the "future ex" is paying the bill, and his name is on the account, then legally, he calls the shots.  If you can't live with the terms, then give him back your phone and your son's, let him decide what to do with those lines.  And do as jim suggested - go get a basic prepaid phone that will keep you connected for minimal (affordable) cost.

  • I'm getting really frustrated and could use some help

    Hello there!
    I'm  not sure what happened because when I plugged in my ipod today (I have an 8g ipod touch) everything was reset to the basics in itunes. My entire library was delted. Honestly I'm not really that upset by that as I was going to change out all of my music anyways.
    My problems are as follows:
    I can no longer add more than 1 folder at a time.
              -How can I change it to where I can add multiple folders again?
    When I do add a folder it now automatically takes me out of the adding music on your ipod spot (sorry I don't know how else to describe that page) but it takes me out of there and automatically creates a playlist and starts to play the folder I just added.
              -How do I stop it from creating playlists automatically? I absolutely hate playlists. I've never used them and I don't forsee myself useing them anytime           soon.
              -How do I stop it from automatically playing the songs/folders I add?
              -How do I stop it from taking me out of the ipod page and into the playlists page?
    My ipod NEVER used to do any of this before so I'm really not sure why all of that changed and why I can't change it back.
    My audiobooks tab is gone.
              -How do I bring this back so I can audiobooks again?
    I've spent the last couple of hours sifting through manuals, let me tell you 138 pages is a lot to go through, forums and google and a lot of technical jargon and acronyms. All in all, I'm having a heck of a time finding exactly what I need to help me out and I admit I am starting to get really frustrated.
    The other day it was so easy, add a couple of folders to the library, select them hit apply and VOILA all was golden. Today, not so much.

    I'm still having troubles getting the audio books to appear.
    Heres what im selecting.
    and then the books tab is still not appearing.
    and then as far as adding folders here is what I am doing.
    this was how i had it before. it gives me mroe control to choose what i want to add.
    that is where i go to add the folder, like i did before.
    selecting the folder like normal.
    then this box immediatly pops up. not allowing me the option to select and apply any music i may have added.
    the music starts playing and it takes me to the playlist page.
    but when i click on the ipod icon and go back into this area. the folder is there.
    all the steps ive just shown you is how i have ALWAYS done this ever since i got my ipod. Ive never had any of these weird problems utnil today.

  • Preventive maintenance and calibration process flow

    Hi Experts,
    I am totally new to Plant Maintenance. My client has the below requirements.
    1) Machine preventive maintenance schedule.(monthly/yearly)
    2) Measuring instruments Calibration.
    3) Maintenece schedules of PRT/Test equipment.
    How to manage all the above requirements. Would be of great help if expalined the entire process flow in detail.

    You can refer following SAP help link to get intro idea about same topic:
    [http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
    SDN discussion:
    [Claibration in sap;
    [Calibration Order Process]

  • Error Deploying a Process Flow

    Hi All,
    Each time I try to deploy a process flow I created, I get the error "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor". The Oracle workflow engine is on a separate machine and all connection parameters are correct. A tnsping of the workflow server works as required and I can even connect to the server (sql prompt) from the command prompt.
    Also, I will appreciate any direction to a site where the steps of creating a process flow is detailed.
    Cheers!!!

    Have you installed the workflow server into the database?
    Have you configured the workflow with the configuration assistant?
    Have you linked the workflow in the design center?
    Is the workflow packaged configured with the location?
    !!! Note for Oracle Workflow 2.6.4:
    When you run the Workflow Configuration Assistant, you need to specify the database connect string in the TNS Connect Descriptor box.
    Enter the following values:
    Accept the default for Install Option
    Workflow Account: (Accept the default ) owf_mgr           
    Workflow Password: owf_mgr                    
    Password : <Enter the SYS account password>          
    TNS Connect Descriptor: localhost:1521:orcl          
    Click Submit.

Maybe you are looking for