Upload Project Structure or Roadmap from MS Project to solution manager

I have a project ready in MS Project .
I want to make a roadmap out of it.
How is that possible? Do I have to manually edit roadmap structure?
OR Is it possible to upload Project Structure or Roadmap from MS Project to solution manager?

Hi Hussain,
Can you please check [this|Creating new Roadmaps; thread for general overview on custom Roadmaps.
In answer to your specific question, it's not possible to create a Roadmap straight out of MS Project, in standard SolMan.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jun 5, 2008 1:06 PM

Similar Messages

  • How to create Project IMG from Reference IMG in Solution Manager

    Dear All
    I am new to solman, and need to create project IMG. can someone provide me step by step guidance to create Project IMG from Reference IMG in Solution Manager. Point swill be awarded.

    >
    Nayab Nayab wrote:
    > I am new to solman, and need to create project IMG. can someone provide me step by step guidance to create Project IMG from Reference IMG in Solution Manager.
    See [Configuration Guide SAP Solution Manager as of SP15|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000673252&_SCENARIO=01100035870000000112&_OBJECT=011000358700000155252008E]  pages 8 - 10.
    Best regards,
    Ruediger

  • Is there anyway to send a mail from Microsoft Outlook to solution manager?

    Is there anyway to send a mail from Microsoft Outlook to solution manager.
    If anybody having notes or documents that will be very much helpful for me.
    Awaiting for your reply,
    With best Regards,
    Alexey

    Hi,
    It is just the inbound mail configuration as like the out bound config.
    Below are the required demo, blogs,helps
    [Demo on Mail from outlook|https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/5087262b-59ef-2910-abb1-957000b7c3d4&overridelayout=true]
    [blog 1 for mail to SAP|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID1382272150DB00641126052855673650End?blog=/pub/wlg/795 ]
    [Artical inbound mail config|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10dfad5a-5398-2b10-568b-d3d999d49b5c]
    Hope this helps
    Jansi

  • To extract portal activity data from the portal into Solution manager.

    HI all,
          I need to extract the portal activity data from the portal into Solution  Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal.  Waiting for a response.
    Thanks and regards,
    Divya.

    Hi
    In solution manager you can do the  analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
    Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
    by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
    some manual configuration of the Activity Data Collector.
    please follow the attached config guide in the SAP note for configuration.
    Jansi

  • Connection From Satellite System to Solution Manager for key users

    Hi All,
    Can anybody suggest which RFC connection/destination should be maintained in BCOS_CUST table under satellite system to connect to Solution Manager.
    1. SM_SSMCLNT010_TRUSTED
    2. SM_SSMCLNT010_BACK
    I don't want user to Login to solution manager while creating a support message. They should create a support messsage seamlessly from satellite system.
    Any help is greatly appreciated.
    Thanks...

    Thakur,
      Sorry for the cryptic answer back there - read it myself and it didn't make much sense to me either so here we go with the seamless way to allow users to create service messages.
      There are 2 ways to do this - 1 way is to use a connection like the 'BACK' connection but if you do this - all user tickets entered will have the username of the 'BACK' connection logon id as the message creator.  The other way is to use the trusted connection so the userid of the person logging the message is transfered with the created ticket.
      I will assume that you want to preserve the unique userid and use trusted connections. So here we go:
    Step 1 - Go into BCOS_CUST on the Satelite and put in your TRUSTED RFC Connection as the detination for the Service Messages - either use the one that Solman created when generating or make your own ABAP Trusted Connection.
    Step 2 - All users in Satelite and in Solution Manager need to have Authority Object S_RFCACL assigned to their userid's so they can use the Trusted RFC Connection (this is not in SAP_ALL or SAP_NEW).
    Step 3 - All users that will use this method of creating service tickets need both a userID and a BP with the respective system keys to allow them to enter tickets for those Satelites.
      That is all there is to it assuming that all issues with Trusted Connections have been worked through already (test this in SM59 by going to your 'TRUSTED' connection on the Satelite and execute the RemoteLogon button - you should be sent to the Solution Manager with out having to logon).
      If this answers your question, please set this message to answered.
    Edited by: David Milliken on Jan 25, 2008 1:55 AM

  • Early watch Report deletions from archive queue in Solution Manager

    Hi Experts ,
    I am working on Solution manager EHP1 (SP24). Here more than 100 satellite systems are connected .
    and every week approximately 100 Early watch reports are getting generated into the system .
    Is there any way to delete the early watch reports from the archive queue of the system which are 6 months
    older.
    A quick help is highly appreiciable
    Thanks,
    Kamal Kumar

    >
    Kamal Kumar wrote:
    > I am working on Solution manager EHP1 (SP24). Here more than 100 satellite systems are connected .
    > and every week approximately 100 Early watch reports are getting generated into the system .
    >
    > Is there any way to delete the early watch reports from the archive queue of the system which are 6 months
    > older.
    Hi Kamal,
    Have you already tried report RDSMOPREDUCEDATA
    It offers the deletion of service session, documents and download data.
    Best regards,
    Ruediger

  • Move Project (Award) budget amount from one project to another

    Hi,
    As per Oracle standard functionality, in Grants Accounting (Projects)
    -- Can the budget amount for a project under an award be moved to another project
    -- Can the budget amount for a project under an award be moved to another project another award
    - In general is there a way to move the funds between projects or awards ?
    Thanks!

    Hi,
    As per Oracle standard functionality, in Grants Accounting (Projects)
    -- Can the budget amount for a project under an award be moved to another project
    -- Can the budget amount for a project under an award be moved to another project another award
    - In general is there a way to move the funds between projects or awards ?
    Thanks!

  • JDeveloper - ADF Faces projects - calling a jspx from another project

    I have an ADF Faces project which has a jspx file and a backing bean. The jspx file is called 1.jspx and the backing bean is called 1.java. Navigation within the page and outside of the page is controlled by the faces-config.xml.
    However, I want to be able to navigate to another jspx in another project. Let's call this jpx, 2.jspx. How would I be able to make this call without losing the current context in my first project? Please note I do not want to have to copy the 2.jspx and 2.java files into my current project.
    Thanks
    Chris

    Hi,
    according to the JavaEE specs, a J2EE context demarks the scope of a session, which means that as soon as you call out to another application, you start a new session, loosing all the information of the other session. So if you don't want to deploy this all in one application, then you have to find a way of persisting context information (e.g. using a shared database instance)
    Frank

  • Project Notifications or alerts from the project

    Dear All,
    In Project Systems module where do we have notifications ? meaning is any changes are made to the project it should be notified to all other modules in SAP
    Regards
    Karunakaran

    Hi,
    As standadr SAP it is not possible, need to activate the Workflow for the required objects.
    Hope its useful.
    Reward points if useful.
    Thanks..

  • RWB alerts from PI7.1 to Solution Manager via CCMS

    Dear All,
    I have configured the alerting in RWB to capture Integration and Adapter Engine failure messages.
    I am getting a detailed description of the alert text in the Alert Inbox.
    Now my requirement is: I need to capture the detailed text message in CCMS to send it back to Solution Manger
    (which sends mails through an auto-reaction method)
    Could you please give me the necessary configuration steps on the PI and Solution Manager?
    Regards,
    Murielle

    Helloo Mike,
    I did tried this but its giving error "Cannot reach the URL (HTTP Code 110: HTTPIO_PLG_CANCELED)" When hitting the check. I am not sure if there is some prerequistes need to be performed  before maintaining the url.
    I am maintaining the Htttps and the relevant configuration has been done in webdispatcher system.
    Appreciate your inputs inthis regard.
    Best Regards,
    Satyabrat

  • Deployment: Deploying external libraries from dependent projects

    Hi,
    i need some help for the following issue.
    How do I deploy external libraries from dependent projects? I have one project for the model layer which references TopLink JPA library and an other project for view/controller based on JSF/ADF Faces. The view/controller project has the model project as dependency.
    For the view/controller project i have created a WAR deployment profile. On deployment all classes and referenced libraries from view/controller project and all classes from model project were included. But not the referenced library for TopLink JPA.
    My second approach was to create a JAR deployment profile for the model project. Again the referenced library for TopLink JPA was not included.
    My third approach was to add a library file group to the JAR deployment profile. I tried to add the library to jar's root and to META-INF directory. But the application don't find the library (java.lang.NoClassDefFoundError).
    The only way I got this running was adding all referenced libraries from dependent projects to the view/controller project which couldn't be the proper solution.
    So how do I get this running? What are the best practices?
    I would be glad to get some input on these issue. Thank you.
    PS:
    I'm using JDeveloper 10.1.3.2 and like to deploy on Tomcat 5.5.23.

    I see your points.
    Unless you have Java EE 5 there is no real standard way of including libraries in EAR files. Including the libs in the WAR files is the only standard supported way for file formats prior to Java EE 5. If you have to consider Tomcat as a possible platform, WAR files are your only option.
    You reluctance to include the libs in the WEB-INF/libs structure is understandable but think of injected dependencies in the Entities you're not aware of. These might be needed in the view layer too.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How do you move pictures from one project/album/folder to a different one?

    I have tried dragging a picture from one album within a project to a different album in the same project and a picture from one project to another project (specifically to a album in the different project), but have had no success.  I have looked through the Aperture Help pages and searched on "move picture", but had no success.  I'm sure there is a way to move pictures.  Any help will be appreciated.
    Thanks

    It's _very_ important that you understand the difference between Projects and Albums:  specifically the difference in the relationship between an Image and a Project or an Album.  This little "Naming of the Parts" I posted has helped others with this non-intuitive issue.
    Read it, try more dragging-and-dropping (if moving is indeed what you want to do), and post back with specific questions (e.g.: I did X, I expected Y, I got Z).

  • How to restrict the user to change the project structure but not the documents?

    Hi,
    I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
    http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
    I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way  to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
    Thanks,
    Rutvik Uapdhyay. 

    Hi Rutvik,
    Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
    role  - SAP_SOLAR01_ALL
    this take care of objects in Solar01 like tab access etc
    role -SAP_SOL_KW_ALL
    this takes care of entire documentation within solman
    hope this helps
    Regards
    Prakhar

  • Solution Manager Project

    When creating a project in Solution Manager (solar_project_admin) I am receiving an error when creating the IMG View for the remote system. The message states that I am not authorized to display the project even though I have SAP_ALL and SAP_NEW authorizations in both systems. When reading the extended help for the error (SPROJECT322) it states that I need the value 03 for the field ACTVT in the authorization object S_PROJECT, but I have confirmed that this is already set.
    It begins the process of creating the IMG in the remote system but does not complete the link back to the Solution Manager project.
    Are there any other reasons why this type of behavior might occur?

    Prince Jose
    Thank you for your suggestion, but let me provide you with a little more information to see if this is still the correct action to take.
    I currently have SAP_ALL and SAP_NEW authorizations in Solution Manager along with many different role assignments.  In the satellite systems I have the IMG_CUS_ADMIN role for managing the projects when they are published to those systems.
    In my most recent work I created a project in Solution Manager using 4 different logical components (BI, ECC, SCM, and SRM) for the systems that this project would interact with.  With my current Solution Manager security and authorizations I was able to create the IMG view from Solution Manager to the BI, SCM, and SRM systems, but received my error message described above for the ECC system.
    Based on that do you think I would still look at my security in the Solution Manager system, or a configuration in the satellite system?

  • Does somebody have experience to manage SAP project with solution manager?

    Hi friends,
    I will implement new project for my client. As I know, solution manager is already part of SAP Netweaver. To install SAP NetWeaver, solution manager must be installed. Meanwhile, solution manager provides a project management tool, for example, the business process definition, blueprint...
    But I never use it to manage project. Could somebody share experience in this area?
    Regards,
    Watson

    Hi Ragu,
    Thanks for your posting. I will implement a SAP APO project. What I need is the methods to use solution manager, for example, configuration manual, step by step guide. I'm also interested in the advantages of SAP solution manager.
    Regards,
    Watson

Maybe you are looking for