Upload quotation and reference sales order to ECC

Hi Guys,
  Can both Quotation and the reference sales order be uploaded to ECC, Currently there is  a restriction in place. Please suggest if it can be transferred through some customizing.
REgards,

Hi,
i belive it's possible.
you may want to give it a try to configure EQUALLY both quotation and order in both CRM and ERP.
then set up the middleware parameter and it should be running for both.
hope it helps.

Similar Messages

  • Sales order with reference to Contract and another sales order

    Hi Gurus,
    I would like your suggestions on one of the business requirement i have.
    We are creating a new EDI interface with few of our customers to create sales orders. While creating sales orders, it should validate if there are any open contracts available and if yes, then the sales order should be created with reference to it. so far good but there are chances that sold to party on the contract could be different from sold to party on the EDI order sent by customer (customer can have more than one sold to party on their system). IDOC's are failing in this scenario and not able to create a sales order since sold to partys are not matching. I need your help.
    Can we do some thing in customer master to handle this scenario?
    or
    Create a new sales doc type (YEDI or some thing) and create sales order from IDOC without reference to contract. Business will look into all YEDI order and create the actual sales order out of it but the challenge here is i cannot refer contract to the actual sales order or YEDI order.
    Is it possible to create sales order with ref to a contract and another sales order?
    Please help
    Thanks
    Venkat

    Hello Venkat
    What is the linkage between sold to party of contract and sold to party of order..If customer has more than one sold to party.
    Why don't you use customer hierarchy....link all sold to party of a customer to hierarchy node.for example...you create a hierarchy  node 1000 and assigned customers 2000 and 3000 to it.you have contract for 2000..so when you create a sales order for 3000 check in knvh table it's customer hierarchy 1000 and get all sold tos assigned to hierarchy...which is 2000....check if contract exist for sold to's..If yes then create order with reference.
    Let us know if it works for you.
    Thanks
    Amit Gupta

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

  • Upload the data for sales order using BAPI

    hi experts,
    how to upload the data for sales order using BAPI.
    what is the FM?
    it would be much helpful if i have the sample code as i am very new to BAPI.
    thanks and Regards
    Shyam

    Hi  Shyam
    Its very useful for u
    BAPISDORDER_GETDETAILEDLIST
    BAPI_ACC_SALES_ORDER_CHECK
    BAPI_ACC_SALES_ORDER_POST
    BAPI_ACC_SALES_QUOTA_CHECK
    BAPI_ACC_SALES_QUOTA_POST
    Reward all the helpful answers..
    With Regards
    Navin Khedikar

  • Display  Pop up message when  changing and displaying sales orders?

    Hi Friends,
    My client requirement is to display text popup during change sales order VA02 , and  Display sales order VA03.
    Pls find me a answer for this , Thanks.
    Nina.T

    Hello Nina...
    Hope you are aware of the configurations you need to maintain for the Text determination.Anyway, herewith are the steps that may help you to accomplish your requirement.
    Text Determination procedure for sales document header:
    Text can be determined at sales document header level or it can be imported from customer master. The process is...
    Define Text types: Path: Imgsales and distributionbasic functionstext controldefine text types
    Select sales document header. click on text types go to new entries and define text types. For Eg:Z1
    Define Access sequence:
    Select sales document header
    Click on change icon
    Click on access sequence control button under dialog structure
    Go to new entries and define access sequence number with description.Ex: 55
    Save it and exit
    Define text determination procedure:
    Go to new entries
    Define text determination procedure.Ex: ZX save it and exit
    Assign text id's to text determination procedure:
    Select your text determination procedure(ZX)
    click on text id's in text procedure control button under dialog structure
    go to new entries and maintain entries. Text id:assign text id (Z1) that we defined in the previous step
    Specify sequence No-10
    Check Reference: this indicator specify that the text is reference or copies from preceding object
    Text in obligatory: text will be displayed during copying. the value of this field specifies whether text is obligatory or not and if it is obligatory the how it is to be displayed
    Apart from this... you also have to maintain the text in the Customer master as mentioned in the previous mail..
    Thanks,
    Safeer Rahman

  • Reject Quotation Item after sales order

    Hi,
    I want to reject a line item from quotation after quotation is migrated to sales order
    steps
    1- create quotation
    2- create sales order with ref to quotation
    3- rejecgt item in sales order
    4- Now I cannot reject the same item in the quotation!!!
    Anything is the customization that I missed to enable rejection of the quotation line item if the sales order line item is rejected?

    i think after creteing sale order and rejecting, you may not reject in quatation..bcoa u already created subsequent order..you can do one thing... goto va02 and dont reject.. delete the quantity and save and next you caome to va22 and goto item data there you can do rejection...
    Reward if it helps...
    Ramki

  • Shipping point determination is not happening for CRM sales order in ECC

    Hi,
    When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
    But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
    All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
    Your help would be highly appreciated.
    Thank you.
    Regards,
    Nagi

    Hello Nagi,
    Shipping point is determined by the following three factors:
      1.shipping condition 2.loading group 3.plant
    So please check your customization by the following steps:
      1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
      2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
      3.Use T-code SPRO then press F5, go to Logistics Execution  Shipping Basic Shipping Functions  Shipping Point and Goods Receiving Point Determination  Assign Shipping Points to check the shipping point is assigned correctly.
    I hope this could be helpful.
    Best regards,
    Maggie

  • New sales order and Change sales order in item level or delete at item leve

    I got one requirement. Daily i have to display one report on new sales orders created on that day and any sales order item is modified or any item is deleted or any item is added.
                      How to get the sales order numbers and position numbers which will follow above creteria. I found one function module but it is not giving position numbers and new sales order details.
             Is there any BAPI for this requirement.

    I am using "CHANGEDOCUMENT_READ" function module to get the new sales orders created and changed sales order items on a particular time. This function module is getting data from CDHDR and CDPOS tables. But only change sales orders is coming. New sales orders which is created on that time is not getting.
              One of my friend is telling like we have to activate one change pointer to retrive new sales orders also. Which is like there will be one check box.
    Is any body having idea on this. Please reply me on briefly with the code to retrive new sales orders and changed sales orders

  • Sales order costing and valuated sales order stocks

    SAP Gurus
    Can somebody explain the key configurations and account postings in sales order costing and valuated sales order stocks in product costing using the specific tcodes.How the process moves from one configuration to the other?
    Use of examples will be appreciated too
    Thanks

    hi rback59
    Thanks  for  your valuable reply
    i completely agree with your point regarding valuation . but want to know what is the impact of recosting of a sales order . as system only picks first goods receipt cost all the time . then what is the use of recosting ?
    Thanks
    Sachin

  • Sales order and return sales order in the same field

    Hi Everybody,
        I have sales sales order and return sales order in the same field ,how can i separate these two orders in the report.
    Your suggestions are appreciated
    Warm Regards
    Shreya

    Both are sales documents and should be separated by document type....i assume that all the documents are sotrd in the same infocube and if you have tha document type characteristic you can separated them directly in a report
    Regards

  • How to get the ammendment sales order number and original sales order no?

    Hello sir's,
    Please tell me the table for ammendment(revised) sales order number and original sales order no.
    Thanks in advance,
    vikram

    Solved

  • WHAT IS SALES ORDER -OENSALES ORDER AND CLOSE SALES ORDER

    HI....
    WHAT IS SALES ORDER -OENSALES ORDER AND CLOSE SALES ORDER
    WHAT IS MB1C AND  MB1B TCODES

    Hi
    If the sales order is made with a Qty of 10 items in it , if the all 10 items are delivered to customer then that is called as Closed Sales order
    Means if Sales order Qty (vbap-kwmeng) = Delivery qty (lips-lfimg) then that is losed other wise out of 10 qty 5 are supllied and 5 are yet to be supplied then that is open sales order
    MB1C = Goods receipt for others
    MB1B = Transfer Posting for Material Moving
    Regards
    Anji

  • 'Reference Mandatory' & 'Quotation Message' in Sales Order Type

    Hi,
    We have got couple of 'Quote' in our System. In VOV8 tcode, when we create different Sales Orders, we want to set the 'Reference mandatory' to B (With reference to Quotation).
    My Question: Out of multiple quotes in the system, to which quote the system would require the user to enter as prerequisite?
    Our Requirement: For one set of order types, we want to make certain quotes type mandatory and for other set of order types, we want to make other quote type mandatory.
    How can that be done?
    For the same requirement, we want to set 'Quotation Message' in such a way, that only for certain order types, the system should check one set of quotes, whereas for other order types, the system should check another set of quotes.
    What would be the best way to achieve, both or one of the above requirement.
    Thanks

    Hello,
    To specify the document types as reference maintain copy controls.
    Here your requirement is to maintain sales document types as reference, so, go to t-code VTAA and there maintain your target doc type like OR/ZOR and source doc.type as QT/ZQT.
    According to your requirement the settings should be:
    1.Target Doc type-OR             
    Source Doc type-QT
    2.Target Doc type-ZOR
    Source Doc type-ZQT
    After you do this setting the system will now refer only those doc types that you have maintained here.
    Hope this helps else friends please correct me.
    Regards,
    Swami
    Edited by: Shivanand Swami on Dec 12, 2008 10:15 AM

  • No Upload into ECC when replicating sales order to ECC

    Hi All,
    The replication of sales order from CRM to ERP works fine when using the SALESPRO business role. But when using IC_Agent the sales orders are not replicated with message in SMW01  "no upload into ECC".
    The unusual issue also is that when I change the IC_Agent business role profile type from "IC Webclient Business Role" to "CRM Webclient Business Role" the sales orders replicated succussfully.
    Anyone knows the relation between business role profile type and sales order replication? why the profile type stop the order from replication to ECC when its set to "IC Webclient Business Role"?
    Note: I use the same transaction type and same order details  in both cases
    Regards,
    Ahmed Elders

    Hi,
    please check notes:
    Note 592881 - Generate test data for function modules - implementation
    Note 517767 - Generate test data for function modules
    Denis

  • User status transfer for sales orders from ECC to CRM

    Hi,
    We use business process with CRM sales orders that are transfer to ERP.
    Users can change user status in the sales orders in ERP.
    How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
    What is the steps to do this for CRM 7.0?
    Denis

    Hi,
    We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
    We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
    In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
    Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Maybe you are looking for