Upload screen is all I can see?
Upload screen stops, and locks. Can't do anything but shut it down, then white upload screen with Apple icon in middle, starts to show upload progress bar, then, STOPS completely.??? I've restarted it a number of times, all with same results. I think I may have been updating to 10.10.3, but I thought that was already done?
iMac 21
Hello nnovia,
Sorry to hear that you cannot boot up your iMac to see your desktop. To troubleshoot this, take a look at the article below to see about getting it back up. I would also make sure that you have a safe copy of your data so you do not lose anything while trying to sort this out.
Mac OS X: Gray screen appears during startup
https://support.apple.com/en-us/HT204325
Regards,
-Norm G.
Similar Messages
-
When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?
The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.
-
I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?
The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.
-
I recently had my iPhone 5c screen replaced. When I switch the phone on all I can see is a dark blue/navy backlight on the screen. The phone powers on although I can't see the apple logo. I can ring the phone a bad Siri is fully functional.
I Have tried to soft rest it but it does not work.
can anybody help?Belly114 wrote:
Unfortunately because you have violated the warranty - it will cost £216.44. See https://www.apple.com/uk/support/iphone/repair/screen-damage/
Unfortunately, since an unauthorized party opened it, Apple won't have anything to do with it at all. It's not eligible for an out of warranty replacement. -
My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.
Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379 -
We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?
The movie is from iTunes. You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.
-
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.
Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred -
I turn on my computer and all I can see is 2 lines?
All I Can Seee On My Screen Is 2 Lines!!
Hello,
Sounds to me like your iBook is suffering from a problem with the display or graphics chip. It could be something a simple as the video cable that runs from the base to the screen.
In the first instance I would reset the PMU just to see if that can help. -
after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks
thanks a lot.. its ok now..
-
How do I return calendar to original view? All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events
Hi, at the bottom bar you should see a series of five buttons. Press the "Month" button if you desire to see the view of the month. As for creating a new calendar event simply press the "+" button in the upper right-hand corner to create a new appointment. *
* Please note that this is all within the app called "Calendar". -
hi, my macbook air has no longer free memory space. I haven`t done anything since it started to comunicate me that. now when i turn it on all i can see is de apple on the top left corner and the rest of the monitor is blue. how can i get some memory space since i can`t even onpen the finder?/
Choose Preferences from the Finder menu, click on the General tab, and uncheck the box to open folders in a new tab.
(117195) -
Text tool not working in photoshop CC, all I can see are small boxes event with giant font
Hi there,
I am not sure what is going on here. I cannot get the Text to show up using the Text tool. All I can see are tiny boxes even made the font 60 points. SHould be huge. Been happening for more than a week and I ran an update via the cloud just last night. Did not fix it yet. Ideas?I find Points are not the most predictable unit to use for text, and p[refer a linear size like inches or mm. Have a look at your image size. If it has a very high pixel size, together with a low dpi (72) then that would give you what you are seeing. If your image size is 4 inches by 8 inches, then regardless of what the dpi is, if you used inches instead of points for text sizing, then you would know to expect 2 inch text to be one quarter the hieght of your document.
Does that make sense? -
Hello. I have switched laptops to a Windows 7 refurb. On my old computer, when I had any window open in Firefox, I was able to see the name of the site in a small block in the taskbar at a glance without hovering. For example, when I had Facebook open, the block/tab said "Facebook" and I was able to see if I had any notifications. (The pages were not pinned.) Now, all I can see for any window is the Mozilla logo. I have tried all kinds of settings on Firefox as well as in Windows for tabs, etc. How can I see each window "in miniature" before?
I also cannot see the "Firefox" dropdown menu in the upper lefthand corner of the window when it is fully open. All I have is the Mozilla logo, not the word "Firefox" with an arrow.
Many thanks for any help!Got it! Never mind! :)
Maybe you are looking for
-
Problem in Stored Procedure with DBMS_OUTPUT statement
Hi All, I am facing a problem in the stored procedure. In the stored procedure I am picking records from the table and displaying them in the screen using dbms_output.put_line statement. This works fine if my query fetches few records but in case of
-
Can BO Universe extracted data to a SQL Server Analysis Services Cube
Hello, I have a situation where all the business rules and aggregations are defined in the BO Universe layer, however now they want to create cubes in SSAS (Sql Server Analysis Services) and create dashboards using Microsoft technology. I am not sure
-
Aperture 2.1.4 crashes using Lion 10.7.2
I am not sure if it is just because I am now using Lion, but my editing software keeps crashing about ever 10 to 30 photos I go through. Its really frustrating especially when Im on a roll and I have to stop and wait for the program to reload. I have
-
Does anyone know how I can increase the volume on my iPhone 5s without jailbreaking the phone? Any add-on I can buy? Any app? HELP PLEASE! (My iPhone 4's volume was great!)
-
How can i use the russian alphabet so i an use my new Russian dictionary app?
Please does someone know how I can turn on the russian alpabet on my phone so I can muse my new Russian dictionary app? Many thanks. RozBox