Upload security calss ID usding LSMW
Dear all,
I want to convert legacy data to new SAP CFM 2.0 using LSMW. When execute the step 'Start IDoc Processing', the system issue a error 'The IDoc interface is not complete for message type FINANCIALPRODUCTSEM_GETDETAIL'.
I am not familar with the IDOC configuration. Could you pls give some comments?
Many many thanks!
Tiger Shen
t
Edited by: Sudhanshu Sharma on Feb 19, 2008 11:09 AM
Similar Messages
-
Error While Uploading GL Master Data in LSMW
Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI ConsultantHi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh -
Upload Purchase info Records using LSMW
Hi,
Im uploading purchase info records using LSMW - direct method
Object 0060 Purchasing info rec.
Method 0000
Program Name RM06IBI0
i need step by step process for this. any one have done this using this program help me out.
Regards,
VimalHello Jürgen
and thank you!
One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
Thanks again
Alicia -
How to upload Purchase Order Data thru LSMW
Hi All,
I need to upload Purchase order data thru LSMW. LSMW Provides standard object method which does not suit for split valuation. But in the client place split valuation is maintained. Is there any other of option of uploading the data.
Regards,
SrivatsanDear Srivatsan
For Upload Purchase order Data through LSMW
Business object BUS2012 - Purchase Order
Basic type PORDCR04
Message type PORDCR
Method CREATEFROMDATA
With regards
B.Ravindranath -
Upload purchase order text through LSMW
Please tell me procedure for uploading sales order & purchase order text in material master through lsmw
Hi
Long Texts are stored in STXH table with 4 parameters TEXTNAME,OBJECT,ID and LANGUAGE
You can't find the complete text in any table
You will find these 4 parameters in the table STXH.
Texts are created using the fun module CREATE_TEXT and SAVE_TEXT and these texts are fetched using READ_TEXT fun module
For uploading these long texts using LSMW see
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
<b>Reward points for useful Answers</b>
Regards
Anji -
How to upload tab-control data through LSMW.....
Hi,
I have to upload the data using the LSMW ....in their i have tab-control...how i have to upload the data of tab-control through LSMW....
Reply me early..if u have any idea...
PhaniHi Phani,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
let me know if any issues.
Thanks
Naveen Khan -
Uploading Security profiles & Security rights using sourcing Workbook
I am trying to use workbook to upload Security profiles & Security rights, and finding it difficult to get the "Resource" field mapping attributes in "eso_security_profiles" tab of the workbook. Is there a reference sheet for this, or a place from where I can map the display names with resource.
Example: If I want update the security rights for Currency attribute with in Master Data under Security Rights tab, we need to use "masterdata.Currency" in "Resource" field of "eso_security_profiles" tab in the workbook. similarly from where can we get the entire list of attributes and thier Resource.Hi,
When I take the download from localized resources (*.class_name), inorder to map the display security attributes to "Resource" in workbook, I am still unable to find the Resource for few attributes like..below..
Queued Messages
User Impersonation For Buyer
User Impersonation For Seller
Cache Configuration
Cluster Configuration
Daemon Alerts.....
and there are many more for which I dont have a match. Please suggest if there are any tips or considerations that we can help while trying to achieve this.
Thanks in advance.
Vinod. -
Mass upload of Source List through LSMW
Dear Experts,
In our plant we have so many materials for which source list has not been maintained properly.Please,can any one tell me in detail how to do Mass upload of Source list through LSMW in detail.
Please do reply me...
Thanks in Advance...
MKHi,
lsmw with Idoc.
Also use "Search Forum" with keywords "LSMW IDOC" in ABAP Development & you find many threads which explains you in detail.
Hope this helps.
Best Regards, Murugesh AS -
How to upload data for me01 using LSMW BDC METHOD
*hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 8, 2011 10:06 PMHi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk -
I want to upload material master (MM01) using LSMW with BAPI method
I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar nHi,
The business object is BUS1001.
Thanks,
Murali -
How to upload data using idoc in lsmw
plz let me know how to upload material using idoc using lsmw. urgent
Hi Vrishali,
refer to the link below:
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
Hope this helps.
Reward if helpful.
Regards,
Sipra -
What are the steps we have to fallow to upload data through IDOC in LSMW?
What are the steps we have to fallow to upload data through IDOC in LSMW?
HI
see this link click on each link it will show you step and screen shot of that step
http://www.****************/Tutorials/LSMW/IDocMethod/
<b>Rewar di fusefull</b> -
Upload Property Master Data through LSMW
I am using the following BAPI to upload the Property Data through LSMW.
Business Object: BUS1502
Method: CREATE
Message Type: BUS1502_CREATE
Basic Type: BUS1502_CREATE03
There are two issues which needs to be addressed and hope that this forum can help me out.
1. In this BAPI, i dont see the field mapping for Company Code and Business Entity, both mandatory fields for creating a Property record.
2. Skipping the first step, i reached the step "Start IDoc Generation" in LSMW and get the following error.
EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is empty.
Anyone encountered these issues? Suggestions to resolve these issues?
HamdanHello Hamdan,
First of all, good decision to use BAPI + LSMW it is the best way to load DATA specifically in REFX. Here's answer to your questions.
1. Pass Company code, BE, other header level fields in E1BUS1502_CREATE structure. This is the main Header structure of the Baisc type you are using. Create source structure with these fields and mapp it to the BAPI fields and you are all set.
2. Check the EDI_DC40 element, or other structures if you are passing values. SAP/System will fill/populate these values on its own, do not pass any values example in fields DOCNUM, CREDAT, etc.
Good luck,
Jag -
Upload table T510 by using LSMW
Hi .
CAn any one help me to upload data to V_T510_C by uning LSMW.
i need to update table with rates for the dates 01.01.2010 to 31.12.2010 and 01.01.2011 to 31.12.9999 to each group and level.
For eg:
payscale type 04, payscale area:04,Payscale group z000 and level 01.
for above record rates - 01.01.2010 to 12.31.2010 is 29.1 USD
01.01.2011 to 12.31.9999 is 30.01 USD,.
Like this i need to upload for all records with different dates and rates.
Please let me know how to create the LSMW record for above senario..
Please take it as priority
Thanks in advance.Hi,
I believe it is not convenient to describe LSMW creation process on this forum. Please refer, for example, to this document to learn about LSMW: http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Then you can create your own LSMW using recording with transaction SM30 and table V_T510 (every time record only 1 record in the recording).
Cheers -
XIF Adapter : Upload of Business partner(Using LSMW) Telephone Numbers
Hi all
I'am uploading BP data using XIF Adapter and I am using the LSMW-IDOC Method (Basic type:CRMXIF_PARTNER_SAVE_M02)
Here My client came with 4 telephone numbers, can any one please help me how can I uploade these 4 telephone numbers. when I am trying to upload by default it was accepting only the first telephone number and leaving the others
Thanks in advance
Warm regards
bmsHi Thierry,
thank you for that suggestion. I've already found [ODS for Marketing Attributes|http://help.sap.com/saphelp_crm50/helpdata/en/07/d545a50869754fbad8062e17c2ea0e/frameset.htm] when I've searched in the CRM Documentation. I've just asked my BI colleague to do the extract to BW. I will then write a Web Service on the BW which can be called from the external system.
Best regards
Gregor
Maybe you are looking for
-
How to manage multiple folios inside our Newsstand App?
We publish a monthly food magazine and will soon publish special "recipe collections" during the same month. (We have Pro account and a multi-folio with iTunes subscription) Questions are... 1. How do I keep the monthly food issue (the parent) always
-
Help please? My first time on this forum so apologies if I boob in some way! I have a monthly subscription for PS and Lightroom. When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, but
-
Help me find my lost photos....
Hi there. I use a iMac with adobe bridge and photoshop elements. Yesterday I loaded up some pics into adobe bride. They went into two seperate file folders in adobe bride. I wanted to merge the two files together so all the photos from that shoot
-
How do I remove duplicate Firefox bookmark folders on my iphone?
I have duplicate and deadend bookmark folders in my Firefox home on my Verizon iphone. How do I remove them?
-
[size="3" face="courier new,courier">The X FI soundcard that came with my new Dell has no analogue line-in jack. It only lists two mic jacks and a digital jack. Connecting my TASCAM cassette deck to the back panel mic jack results in a terribly clipp