Upload Speed now collapsed

Now on Day 2 since my line was fixed, and day 3 of my 10 day DLM training period.
I expected my download speed to reduce somewhat, and the speedtest has come down from 71.79Mbps to 62.97Mbps (NB: My original prediction was 58.5Mbps so this is still better than prediction). My download profile is now 67.21Mbps.
However I am puzzled by my upload speed. Straight after the line was fixed it was up at 16.22Mbps but now it has dropped to 3.6Mbps. This despite the fact my profile has remained at 20Mbps.....
I have also noted that the BT Speedtester is now reporting I have a 'Premium' video streaming service. I am presuming that, despite the fact I do not pay for BT Vision at present, I do have a Youview box with the BT Vision Player on it, and the network must have picked up on this. Does this affect upload speed somehow??

My upload speed has now come up again to 9.73Mbps and is sticking at that level, so it looks like the major collapse was a temporary issue. However still getting a lot less than the 15Mbps I was getting on day 1 or the 18Mbps predicted, so not quite sure what is going on still. I am getting more download than predicted but less upload.
I did have a problem with AM radio signals getting onto my ADSL2+ line and putting notches at 909kHz etc. Maybe there is a notch in a part of the band used for upload?
I have done as you suggest and disabled QoS in Windows / adapter settings, and disabled large send offload. I have also set my MTU to 1492. It doesn't seem to have improved speedtests. However, it might be psychological, but websites seem a bit snappier.
PS It's not the BT speed test site underestimating - upload is low on all speed test sites I have tried.

Similar Messages

  • Slow upload speeds when using my wireless N router

    Hello,
    I just have a quick question maybe someone can help me out with.  I have my verizon issued G rated router hooked up normally.  I turned off the wifi, and using one of the lan ports ran a cable to my D-link wireless N router.  I wanted to use this router, because it gives me great coverage in my house and have worked great for me in the past.  Anyway, I plugged my pc which has a gigabit adapter directly into one of the four open lan ports on my wireless N router.  Download speeds were consitently between 41mb/s to 45 mb/s which is awesome.  However the upload speeds are horrible and tops out around 3.5mb/s. 
    Here is where I need someones help.  If unplug the PC's lan wire from my wireless N router and instead plug it directly into one of  the open ports on the  Verizon router, I get the same download speeds, but now i am getting between 30 and 35mb/s.  Does anyone know why plugging into the lan port on the other router kills the upload speed? It has to be something in the settings, because if I connect wirelessly to either the verizon or the Dlink routers, I get the same upload speeds for both usually around 25mb/s.  Any help would be appreciated.  Thanks

    You don;t say which D-Link router you have.  A number of D-Link routers have an option called "Game-Fuel".  This is a setting that enables specific QOS settings.  If you have Game-Fuel turned on, that can adversely impact your upload.  Game-Fuel uses QOS to ensure that no one user monopolizes the upstream bandwidth.

  • How to improve upload speeds with new Airport Extreme?

    Hi!
    Just plugged in a new Airport Extreme to replace a BT HomeHub 3.0.  The wi-fi download speeds have generally increased over a wider range in the house but the wi-fi upload speeds have dropped to under 1Mbps.
    Speeds to laptop linked via ethernet appear fine (both up & download).
    Initially thought that I may have messed-up the set-up but the fact that the wired connection works fine makes me think this is something to do with the Airport settings - a scary thought as I don't really know much about this stuff.
    As range was really the reason for getting the AP Extreme I'm contemplating plugging the HomeHub back in and just trying to use the AP to extend the old HHub system rather than setting up a new AP system...
    Any suggestions would be most gratefully received!
    Thanks

    ... just a quick note to say that the appears to be resolved after a long telephone call to apple service dept (very patient - very helpful).
    In my naivety I had attempted to revert back to using the homehub (3.0) router and connecting the APExtreme into one of the Ethernet LAN ports but this didn't work!  So called the apple helpline & we went back to basics until it worked.  One point to note that may help anyone finding themselves in a similar position...
    I had followed the instruction to reset the APEBS depressing the button first whilst powered then without power and during the unit being reconnected to power supply thinking tha this would do a full restore to factory defaults (effectively undoing all the messing- around I may have done flounderinng through the settings) but it was only when I was directed to do a full reset through the Airport Utility settings [Edit\Advanced\Restore Defaults] that this worked (for me).
    Download and upload speeds are now up to 93% of advertised speeds wired, & wireless with some fluctuations which appear to be network delivery related rather than anything to do with the APEBS.  It's working well with an APExpress which had been struggling (intermittentlyout of range) which is connected to stereo and Apple TV.
    By the way - thanks to other posts regarding importance of not connecting an audio out cable to phono sockets on the stereo (horrible sound quality) using a redundant CD channel it works great.
    All-in-all, very happy with it so far.

  • Basic Questions on ActionTec MI424-WR Router - problems with poor download/upload speed

    First, I will get to the point and ask my questions, then will explain what's happening - I'm interested in hearing whether the right actions are being taken to solve my problem.
    1) After perusing the forums, I see frequent reference to the "Rev" version of the ActionTec MI424-WR Router.  How do you find the Rev version?  I have logged into the Router and in the "System Monitoring" icon, the Router Status lists my Hardware version as 'A'.  Does this mean I have Rev 'A'?
    2) What is Verizon handing out these days for Routers?  Mine is being replaced, and I am wondering what to expect.  I have Verizon FIOS Phone, TV, and Internet service, and have the 25/25 Internet service.  Will they give me another MI424-WR?  If so, what Rev level are they likely to give me?
    Here's why my router is being replaced - opinions/comments/advice welcomed.
    For the past year or two, I've consistently measured (via speedtest.speakeasy.net) about 30Mbs download, and around 22-25 Upload.  Lately, I noticed that my downloads were quite slow, so I tested my speed at the above website, which I had not done in many months.  I measured only about 2-3 Download and 1-2 up.  Note all of what I am discussing hear takes place with hard-wired ethernet, NOT wireless.
    I tried testing from multiple computers, running XP, Vista, and Windows 7.  All getting consistently similar poor speeds.  I verified my account still is supposed to have 25/25/ service, which I verified online. 
    Tried rebooting the router, no change.  Then tried hard reset (pushing in the recessed button, holding it for about 20-30 seconds.  After it reconnected to the Internet, I tested speed again.  No change.
    Interestingly, I tested wireless speed on the laptop I have.  Speed is MUCH better, around 15 down, and 10-12 up.
    I tried the speed optimization tool on two of my PCs, it made no improvement.  Finally, got into an online chat with a Verizon Tech.  He did some tests on the line, we repeated some of the things I already tried, and then he asked how old my Router was...I am pretty sure it is the original one I received when I first signed up for FIOS, around 5-6 years ago, which is one of the reasons I asked how to tell which rev level I had.   So the tech concluded the problem was probably my Router.
    I TEND to agree, especially because I recently had an "anomaly" on my network.  My son complained one day that Internet was down.  When I got home, I found out my NetGear Gigbit switch was dead, and two of my hard-wired ethernet network printers could no longer talk to the network.  I replaced the switch, so now I am thinking perhaps the Router was damaged somehow.  I have no idea what the cause of this anomaly was - everything that connects to my network was plugged into Triplite ISOBAR surge protectors, but that only protects AC power. 
    I would think a hardware failure would completely kill the ethernet portion of the router, not simply reduce speed, but I could be wrong.  Anyone been through something similar to this before?  I expect to receive the new Router next Thursday, so hopefully I should know by then, but still - what should the next steps be if the new router does not fix the problem?
    Thanks for any comments, insight or shared experiences you might be willing to share...
    Solved!
    Go to Solution.

    This is embarrassing.
    Smith6612, you are absolutely correct, and you nailed it!
    When all this mess started, I checked my Verizon account to make sure I was signed up for 25/25 Internet.  I was.
    I don't know what has happened, but after reading Smith6612's response, I went back to recheck my account.  I was set up for 15/5!  So, the speedtest measurements I have been getting the last couple of days are exactly what I should be getting.  Two possibilities:
    1) My Triple-Play bundle must have expired in the past two weeks by coincidence.
    2) The Verizon tech may have changed my account profile when I worked with them online last week, although this was never discussed.
    At any rate, Smith6612 wins the prize.  It certainly explains the download/upload speeds I am getting.  I have logged into Verizon and signed up for a new bundle.  According to their website, my new profile should take effect Tuesday 1/10, so after that point, I should be measuring 25/25 again.
    Thanks to all who responded to this thread.  I will update this thread to confirm after Tuesday.  I get nervous whenever I have to change anything with Verizon - although everything has worked fine for the past few years, we have so many services with them - Cell Phone, TV, Internet, and Home Phone, that I worry something will go wrong with the billing, but we'll see.

  • Download and Upload speeds have been dropping sinc...

    I have recently been having seriously problems with my connection, every day the router appears to reset/crash, sometimes once and sometimes more than several times a day.
    This was the speed I was getting in December, everything was fine.
    Now this is the speed that I am getting.
    I'm not sure how this is happening but I have been able to confirm that it isn't an issue within my household, there is only have one master socket which the router is connected to along with a wireless phone thats connected to it.
    This is what the results that I got from the router.
    Line state
    Connected
    Connection time
    0 days, 0:18:57
    Downstream
    2,016 Kbps
    Upstream
    256 Kbps
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    15.5 dB / 6.0 dB
    Line attenuation (Down/Up)
    56.0 dB / 31.5 dB
    Output power (Down/Up)
    17.0 dBm / 11.8 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    15 / 0
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    0
    And this is the test that I took on the bt speedtester.
    1. Best Effort Test:  -provides background information.
    Download Speed
    1303 Kbps
    0 Kbps
    2000 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 1303 Kbps
     For your connection, the acceptable range of speedsis 800-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :2080 Kbps(DOWN-STREAM), 320 Kbps(UP-STREAM)
     IP Profile for your line is - 1500 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 13.18:22.06:64.83 (SBE : NBE : PBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    2. Upstream Test:  -provides background information.
    Upload Speed
    240 Kbps
    0 Kbps
    320 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 240 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 320 Kbps
    I'd like to know if a conclusion could be brought to why my connection has been falling since December. Could it of had been a line switch? Because my connection was fine up until the start of this year.

    Hi lionheart1066
    I see Imjolly was giving you a hand with this on another thread.
    We still need to try and get you connected via the test socket to rule out external wiring and possible swap over micro-filters too.
    I note you mentioned you have an I-plate.  Take this off, as it could be faulty, as you will then see the test socket.  If possible connect up via Ethernet and leave for a day or two and see if this stops the drops. 
    Its also important to look out for other sources of interference.  You can see a list of common offenders on this link.
    If you have tried this out and are still having problems drop me in an email please with your BT account and telephone number along with a link back to this thread.
    Just send using the contact us form in my profile under the 'about me' section and mark FAO Craig please.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Poor upload speeds via speedtest affecting iTunes match failure to upload new songs?

    Hi Guys,
    My itunes match is stuck at stage 3 - I only have a couple of albums worth of songs to update but it is freezing and eventually erroring saying it can't complete the request and times out.
    generally it is fine with a 15,000 song library. My itunes is up to date. I have logged out and logged in and now I can't even see any of my icloud tracks, even though it says I am logged in...
    My internet browsing has also become very sluggish. I have done various checks and the only thing I have noticed is that my upload speed via a speed test is 0.01 if am lucky which is very low seeing as I should be on around 5MB (via virgin media superhub)
    Would this explain my Itunes match issue?
    Any help or advice on these issues would be hugely helpful.
    Cheers,
    Dave,

    Hi rhirons,
    Unfortunately at present there isn't much I can suggest, you've pretty much covered off most of the troubleshooting there is for iTunes match. This is a common problem and has been ongoing since the beginning of the month affecting a lot of people. It appears to be an issue at the iTunes side and until Apple acknowledge there is a problem and fix it I'm afraid we're stuck.
    I'd recommend contacting Apple Support online by going to https://getsupport.apple.com/Issues.action then selecting iTunes Store > Connecting & Downloading > iTunes Match
    The more people that contact Apple to report the issue will hopefully will trigger a response to get the problem sorted.

  • Since regrade no increase in Upload Speed? Is this...

    Hi all,
    My BT Infinity has now been upgraded to the 80/20 service for just over a week. The download speed has doubled from 35 Meg to circa 70 Meg. But the upload speed is stuck at circa 7 Meg, which is good but it hasn't increased from the 40/10 service. I would expect the upload to be circa 14 Meg. Is there a reason why? Is there anyway to increase the upload speed even at the expense of download speed?
    Thanks
    Download speedachieved during the test was - 72.43 Mbps
     For your connection, the acceptable range of speedsis 12 Mbps-77.43 Mbps .
     Additional Information:
     IP Profile for your line is - 77.43 Mbps
    Upload speed achieved during the test was - 7.68Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 20 Mbps

    Try the upload speed test at http://mcslhr.visualware.com/myspeed/myspeed_line_capspeed.html.  The bt tester grossly underestimates upload speed, especially if you have significant latency.  It was giving mine as around 6 or 8, when a proper tester (as above) or a good real site was giving 17.  
    If you have problems with the capspeed tester above (it sometimes has Java issues), http://speedtest.net/ still suffers a little from underestimating upload, but not nearly as badly as the BT tester.  It gave 12 or 13 at the same time I was getting the above results.
    Now my line and latency are improved the differences are there but smaller: capspeed 17.0, speedtest 15.7, BT wholesale 13.7, BT retail 9.17.

  • Why is the upload speed for "downloadable product" so slow?

    Upload speeds are normal with other adobe services, but when it comes to uploading my product, the speed continually decreases to a crawl, making it impossible to get my product online. It starts slow: at about 20kB/s and then drops to 3kB/s!
    Any suggestions?
    Thanks.

    hi Sanjit,
    Using safari, only one one file was being uploaded, no other browsers or windows open. On a whim, decided to add " https:// " before the address after logging into BC... it made an improvement in the upload speed. Am now getting about 50-54kB/s. It's useable, but still slower than it should be.

  • IPad (and iPhone 4) upload speed on wi-fi very slow - any thoughts?

    Both my "i devices" - an iPad and iPhone 4 are very slow for upload speeds on wi-fi. For example, here are the results of using speedtest.net on my iMac 21.5", iPhone 4 and iPad just now:
    iMac: download 38.39 Mbps, upload 19.22 Mbps (so the wi-fi network itself has good upload speeds)
    iPhone 4: download 21.17 Mbps, upload 0.39 Mbps (why so slow?!)
    iPad: download 23.66 Mbps, upload 0.71 Mbps (why so slow?!)
    The wireless router is an Airport Extreme updated to the latest firmware.
    I've seen screenshots of other people's iPad and iPhone speedtest.net tests where the upload speed over wi-fi doesn't suffer compare to download like mine does, by a factor of 54!
    I've seen postings here and there by people with similar problems. Are there any solutions? Are my iPad and iPhone 4 bad? Are they incompatible with my Airport Extreme? Are there "settings" somewhere that can help with the problem?
    Any advice would be appreciated.
    Thanks.
    doug

    Hi, Carolyn.
    Perhaps so. Maybe there are certain kinds of connections which are better suited for iPads and iPhones than others. But the download speed on neither device seem to have problems. It's just the upload speed.
    I did try several channels yesterday - 6 through 13 - but it didn't seem to make a difference.
    Why would trashing my Mac preference files and restarting my Mac help anything? My Mac isn't having any problems.
    Oh, by the by, on my iPhone at least I already tried resetting Network preferences. I even did a Reset > Erase All Content and Settings and re-installed my iPhone 4 from scratch. While still in a "vanilla state" before restoring from my backup, I tried testmyiphone.com via Safari and got similar results - very poor upload.
    The 3G connection also fluctuates between "so so" (1-2 Mbps down, 0.8 Mbps up) and really horrible (0.2 Mbps down and 0.05 Mbps up).
    I did just try your suggested "reset networks" on my iPad. This time I got a download of 13.26 Mbps and upload of 2.2 Mbps on the first test. On the 2nd test I got about the same download, but an upload speed of just 0.63 Mbps.
    So something's still wrong.
    doug

  • IChat Theatre slows upload speed to 80kbps

    Has anyone else noticed this? I know it's been like that for iChat screen sharing for some time but now I see it happening with iChat Theatre as well. For example, the video chat runs at 700kbps in both directions until someone starts iChat Theatre the bandwidth is immediately cut to 80kbps. My ISP does not traffic shape in any way therefore it seems to be iChat software. At these speeds, like screen sharing resolution is too low to be watchable.

    Jim0 wrote:
    I have a Dlink DGS-2208 gigabit switch connected to my Actiontec router. I just upgraded my FIOS speed to 35/35 from 25/15.
    If I connect my computer directly into the Actiontec router, I get 35/35 speeds just fine.
    But, if I connect the computer to the DGS-2208 and then connect the switch to the router, I get 35 down still, but only 15 up. This is very consistent. If I go through the swich it's always 35/15. If I go straight to the router, it's 35/35.
    The DGS-2208 is a gigabit switch. Why is it cuting my upload speed in half to only 15.
    I would also note, that when I had 25/15, the switch also worked at 15 up. That is, it worked at full speed. But it can't seem to go over 15 up.
    Any suggestions are welcome.
    I don't know why you'd be having the problem you're seeing, but just for informational purposes, I have a Linksys EG008W gigabit switch in the same configuation you describe and  I get 43/32 mb/s down/up.
    A couple of thoughts:
    Do you have another computer on your LAN, connected to the switch and, if so, what kind of throughput to you get between the computers?
    Have you tried a different Cat 5e/6  cable between the switch and the router?
    And have you looked at your NIC's properties and tried forcing it in to 1000 mb/s full duplex?

  • Macbook upload speed suddenly slow see history

    Hey there,
    So my wife has the white Macbook from september 2008 and I have the Macbook Pro 15in from March 2009. We both share the same internet connection but after the upgrade to SL her upload speed has become painfully slow (see history) while mine is still the same speed.
    Date Download Speed Upload Speed
    Tuesday 00:55 984 kbps (123kB/s) 27 kbps (3.38kB/s) Share
    Tuesday 00:06 989 kbps (124kB/s) 19 kbps (2.38kB/s) Share
    Sep 4, 22:01 1059 kbps (132kB/s) 120 kbps (15kB/s) Share
    The september 4th speedtest was BEFORE the SL upgrade and the tuesday is AFTER the SL upgrade, but then again I upgraded my Macbook Pro to SL and there has been no drop in my upload speed.
    What to do? My wife is now using my Mac which is no good for any of us.
    Thanks
    Thomas

    Select each of the items shown in RED in Activity Monitor. Click on the Quit icon in AM's toolbar then click on the Force Quit button. You only need to do this if you are unable to quit the programs in the normal way - Make the program the frontmost application, then press COMMAND-Q.
    You also have two items in the /Library/StartupItems/ folder. They should not be there. You can remove them. HP should have updated software that replaces the older driver. I'm not sure about the TiVo item, but it should not be installed in that location.
    You should check the Classroom Enrichment application for compatibility with Yosemite: See App Compatibility Table - RoaringApps.
    As for your backup needs I would suggest this:
    Repartition the Seagate backup drive. This removes all the Seagate software. If you want more control over your backups than provided by Time Machine see the following options:
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. You can download free trial versions of all six so you can try them out and decide on the one you prefer before paying for it. I am a big fan of Carbon Copy Cloner, but that does not mean it's your best choice.
    Now given all the above consider that you can always use Time Machine. But until you get your computer straightened out I would refrain from making a backup. There's no point in restoring a malfunctioning backup made of a malfunctioning computer.

  • Download / upload speed suddenly divided by two, c...

    For the past two weeks I noticed that my download and upload speed has been divided by two, I use to enjoy 1.4 meg and it is now down to 0.6megs  it is not a connection issue because it is stable, it looks more like a throttle has been applied to my package. I called support yesterday and they said they would "reset" my line as my connection appears to be slow from their system, nothing seem to have changed yet. My IP profile has also been divided by two and is now 7.5 megs instead of about 16 megs, I am a bit puzzled. See my ADSL stats below 
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 18:11:49
    Downstream
    6,656 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    20.4 dB / 28.0 dB
    Line attenuation (Down/Up)
    24.0 dB / 13.0 dB
    Output power (Down/Up)
    19.8 dBm / 11.6 dBm
    Loss of Framing (Local)
    33
    Loss of Signal (Local)
    3
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    69 / 0
    CRC Errors (Down/Up)
    0 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    14
    Solved!
    Go to Solution.

    And see below my IP profile, my Max achievable speed was twice what it is now, any idea what could be the cause ?

  • Very low Upload Speed. How can I increase this?

    Hi there, new to the forums with my post.
    I'm a frequent online gamer and have the Bt unlimited package as a result. However over the past month I've been experiencing high latency spikes or just high latency in general upward of 1000ms. Naturally this makes any form of gaming impossible. During this past month I've conducted many speed tests and only recently discovered that my upload speeds are ridiculously low, ranging from 0.02mbps to a maximum of 0.06mbps. I believe this is what is causing my lag issues.
    My question is. What can I do to resolve this and raise my upload speed to an acceptable standard?
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    2 days, 7:33:35
    Downstream
    4,544 Kbps
    Upstream
    77 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    10.9 dB / 9.0 dB
    Line attenuation (Down/Up)
    46.0 dB / 31.6 dB
    Output power (Down/Up)
    0.0 dBm / 12.6 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    2426 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    1945

    Ok, heres the latest. Been on the phone to BT for the past few days. Theyve done various line tests/resets and have recently sent us a new homehub3. However our problem is now worse? Heres the latest speedtest.
    FAQ
    1. Best Effort Test:  -provides background information.
    Download  Speed
    1.11 Mbps
    0 Kbps
    4 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.11 Mbps
     For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
     IP Profile for your line is - 4.01 Mbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    44 Kbps
    0 Kbps
    832 Kbps
    Max Achievable Speed
    Upload speed achieved during the test was - 44Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 832 Kbps
     Also, when I use www.speedtester.net it thinks i'm in gloucester when i live in south west scotland. Think this may have something to it?

  • VERY SLOW UPLOAD SPEED??? PLEASE, PLEASE HELP MODE...

    Have recently moved back to BT from Talk Talk. Average speeds with talktalk were: 2800kbps down and around 400kbps up. This is what I am getting now!!!!!
    Line state
    Connected
    Connection time
    0 days, 0:34:10
    Downstream
    1,472 Kbps
    Upstream
    64 Kbps
    ADSL settings<script type="text/javascript"></script>
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    11.6 dB / 5.0 dB
    Line attenuation (Down/Up)
    63.5 dB / 31.5 dB
    Output power (Down/Up)
    16.5 dBm / 12.8 dBm
    Loss of Framing (Local)
    12
    Loss of Signal (Local)
    1
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    45 / 15
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 7
    Error Seconds (Local)
    1
    These speeds, coupled with a ping time of around 300ms has made my broadband worse than useless!!! The Kids are driving me mad as Xbox live and Call of Duty online is just a mere pipe dream the way it is at the moment
    Never thought I would say this, but why did I leave talktalk????
    What can I do???? Nothing has changed with my internal wiring and all I have done is change the talktalk router for the home hub.

    Hi Martsamps,
    20Meg ADSL2+'s Upload speed is rate adaptive unlike the old 8Meg ADSL connections (Which are capped at 448kbps). Looking at your line attenuation, it looks like it won't get any better im afraid. Hopefully someone can confirm this. It could be that the homehub isn't as good on your line as your old TalkTalk router (It's been known to happen).
    Cheers
    Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

  • Extreme slow upload speed in Dallas area

    Hello
    Something happened to my upload speed last Thursday, it has dropped considerably connecting to most servers making many sites very sluggish. I have the hardest time just attaching a file in Gmail and the gmail chat keeps saying 'unable to connect'. Using FTP for my work is almost impossible. It's takes me 5-10 tries to upload a file that's not even 50KB.
    I've called Verizon tech support and went through different diagnostics and then they sent a new router, which still didn't help. Here's what I concluded so far:
    It's not the router
    It's not the computer since it happens on every machine
    It's not the wiring since I can get good speed test connecting to some servers.
    It's not the servers that i'm connecting to; everything works when i'm at work or on the phone.
    I have 15/5, I've attached some speed test results.
    Verizon's own speed test page even timed our during upload, which was stuck under 0.5 when it was about to finish.
    Anyone else experiencing this? Verizon say my issue is currently with the engineers, but I have no idea how long that wait to be.
    Thank you

    Is there any Verizon representative that can escalate my issue?
    Basically a tech came last Saturday and wasn't able to figure out what was wrong and left and closed my ticket. Whenever I call back now they're just telling me it's my computer, which is completely FALSE. All my 5-6 computer just doesn't happen to have slow upload speed of the sudden and require modification to RWin buffer as the suggested by the on-site tech. Verizon phone support bluntly told me they can't do anything further and would charge me for coming out again to replicate my issue.
    Things the tech have already tried:
    -Run Fios Optimizer multiple times on multiple computers.
    -Replaced router
    -Replaced ONT
    -Rebooted PON card
    Upload speed still sporadic, works perfect on some speedtests, but it's less than 0.5MB on many servers including Verizon's very own local speedtest. Gmail and any google site request is constantly slow. This site is slow and often times out. FTP to my own site is almost impossible if I want to upload a file that's bigger than 100kb. 
    I'm extremely frustrated.... There are reports of same exact issues in other thread, one seems to be fixed. Is there any way Verizon can look at that and apply it here?
    http://forums.verizon.com/t5/FiOS-Internet/Slow-upload-and-tired-of-techs-closing-tickets/td-p/62221...
    http://forums.verizon.com/t5/FiOS-Internet/Slow-upload-speed-on-evenings-for-almost-2-months-now-on-...
    Problem was fixed for Headhunter6
    http://forums.verizon.com/t5/FiOS-Internet/Unusable-upload-speed-at-night-and-during-weekend/td-p/62...
    http://forums.verizon.com/t5/FiOS-Internet/extreme-slow-upload-speed-in-Dallas-area/td-p/619117
    Is it because I'm using a community account on this forum so I'm being ignored?
    I've tried to sign up using my residential account, but got this yellow error page.

Maybe you are looking for

  • VO with bind variable defined in SQL is not updated correctly

    Hi Experts, I have one simple question here, could you please help answer? Thanks a lot! I have 2 pages, the first page displays an employee table, the second page shows some details related to the selected employee. When select one employee and clic

  • Problems with Installation omwb 1.2.4.3.0 Beta

    I have installed Oracle 8i Client 8.1.5 (Oracle Universal Installer 1.6.0.7.0). I download omwb-1_2_4_3_0.exe. But I can't install the Workbench. I can choose Typical or Custom Installation and then I have following message "Der Bereitstellungsbereic

  • New mac mini - magic trackpad - won't do initial pairing (hence no anything

    So I just got a Mac Mini server, and I've only had laptops in the house up until now (so no USB keyboards or mice), so I got a Magic Trackpad and the wireless keyboard. Upon booting for the first time, I get the expected image to turn on the wireless

  • Automatic printing of purchase order in a particular printer

    Hi Do anyone know, the setting for automatic printing of purchase order by a particular purchasing group in a particular printer. The requirement is that The group has to print only Pur Oder in this printer. I don't want to use SPRO>Material Manageme

  • HP 6735s Backlight not working

    History - HP6735s cracked screen - replaced - works for 2 weeks then backlight went out - replaced inverter (twice in case one faulty). Replaced video cable. - Still not backlight. (LCD does work) Was wondering what could cause this? according to ser