Upload System folder to use Classic in OS 10.4.6?

Hello, I have recently upgraded my old iMacs (400MHz & 500 MHz) to OS 10.4.6 and they both seem to run fine, except one thing, they don't have Classic. I have Classic ablility on my iBook G4 which uses OS 10.3.7.
My question is there anyway to just download the "system folder" that Classic uses in my OS 10.3.7 and upload it onto both the computers in order to use CLassic?
This is important since I am going to by upgraded the two iBook to OS 10.4.6 and that would be great to have Classic without trying to install OS 9 then OS 10.4.6, to just use Classic, and that opens up another can of worms when trying to back up the new address book and emails, etc. But I hope there is a way. Help if you can, thanks.

I'm not sure if this is a "big discovery" or not but I actually did copy the system folder and applications (Mac OS 9) from my iBook G4 running OS 10.3.7 to my iMac G3 running OS 10.4.6. I buurned it onto a CD and to my amazement it works!
I went into Classic in preferences and it found the Macintosh HD (I had restarted a few times, while going through to each step)
I put the system folder and application of OS 9 in to the Macintosh HD just like they were on my iBook.
When it was in Classic and it found the folder, I started it up, it said something about needing to update the folder, and it wouldn't affect boot folder (or something of that nature), so I clicked OK and it started up and I was running Classic.
That is only the half of it. And I had called up a person in Tech Support at Apple earlier in the day and they told me I would need to "Install" off the original 2nd CD (additional software)and that would give me Classic. But I bypassed that and just took the folder from my iBook and put it onto OS 10.4.6.
I restarted.
The whole reason for me doing this stuff with classic was to be able to use my mother's "Mail" application (Outlook Express 5.02) and get her emails and address book back with all of her "groupings" (she has like 10,000 email addresses).
So what I did from there was to get the copy I made of my mother's stuff (I had made a copy of Microsoft User Data, Contact Export, and the Mail application). I then proceeded to swap out the Microsoft User Data That I had on the new OS 10.4.6 with that folder from the OS 9.2.1 and put the old one in documents with the new one on the desktop.
I went to Classic in System Pref. and started it up.
I then went into the Identities folder in the Microsoft User Data (old one), Main Identity, then Messeges (outlook express file). Clicked on it and it said something like "rewriting strings" or something along those lines. It said something about starting up the email again and I ignored all of it because at this point I could see that I successfully got my mother's mail back in classic.
I looked and saw that her address book was there with all her groups. (I should note that I already knew the mail would work because I checked by uploading the same files/folders onto my iBook with Classic's help).
But now I had an operational mail off of my iBook and back onto my mother's computer.
I then decided to press my luck and see if the computer could boot off the OS 9 system folder. I went into Start Up Disk in System Pref. and sure enough OS 10.4.6 was there along with the new OS 9.2.2 system folder. Hmm, should I try it will it work? The guy online I think said it wouldn't work and the "pot-head" guy in Apple Tech Support (he did sound stoned) said I won't be able to do any of this. F*ck it.
I restarted on OS 9.2.2.
It actually booted up and I was on the desktop and I went to see if I could actually use Outlook on this desktop and clicked on it, there was an erroe that said I needed to copy the identities folder from Users:my name: basically just get the identities folder, and move it to the outlook express folder. I did so by copying (option key).
I went back to the outlook express, clicked on it and started it up. It worked, it works, just like it did originally (I should note I already had the Mail set up in OS 10.4.6 to our ISP and it is a POP account, it was set up before I tried any of this). I sent myself an email to anotherr account and it worked.
I had talked on the phone with tech support people for at least a couple of hours, coming to the conclusion that I had improperly backed-up my data (emails,etc.) on both (my iMac G3 was running OS 10.2.8 and OS 9.2.1 before I zeroed and formatted it to OS 10.4.6) OS 10.2.8 and OS 9.2.1 and since I didn't have Classic in OS 10.4.6 I coudn't look and see what had and would have to reinstall from the original install CDs then upgrade to 9.2.2 and then "upgrade" to OS 10.4.6 to even have a chance of seeing what I had; and even though I told them what files I had they couldn't tell me if it was correct. My mother was freaking out on me, I won't go into details but she was extremely upset with me. I felt horrible I couldn't even load the stuff from OS 10.2.8.
I thought I had failed and resigned that it was lost. Then a couple of days later I thought "hmm, I see that my comp has Classic I wonder if it would work if I uplloaded it onto my comp" I found out that both of the back ups I made worked, and that I could import the stuff I had in OS 10.2.8 into my Mail (1.3.9) on OS 10.3.7 on my iBook G4.
I am absolutely ecstatic about the fact that Classic works beyond the bounds of what you guys and everyone else said. I would have wasted a lot of time reinstalling all the OSs onto the computers just to have CLassic and now that I'm upgrading four Macs in my house to OS 10.4.6, I can now have classic without absolutely taking HOURS to upload the installers and do damage control. But thanks to you guys who helped and actually I still need help with exporting and importing messages and exporting my address book in OS 9 but now it is easier and alleviates future problems with other systems (I think ). Thanks anyway.

Similar Messages

  • Do I need System Folder to run Classic in 10.4.6?

    I've just bought a new MacBook Pro last night, and in the process of transferring data from my old PowerBook via FireWire connection (the automatic way) it created a number of folders that said "[title of folder] (from old Mac)". In nearly every case, this was accompanied by another folder without the "(from old Mac)" text. One that was only from the old Mac was the OS9 System Folder. Do I even need it, or is all the code necessary to run Classic embedded in 10.4.6?
    Thanks in advance!

    Hi Steve;
    Instead of Hypercard, you might want to check into Revolution. There was a discussion of that on this thread; http://discussions.apple.com/thread.jspa?messageID=2072745&#2072745
    Allan
    If you are interested in donating your spare CPU cycles to science, please try
    http://teammacosx.homeunix.com/index.html

  • Role Upload - System Aliases not used

    We are having a strange occurance during role upload.
    In the migrated content area, iViews are being created in folders that refer to system aliases used (e.g. R3, BW, etc.).  However, the "System" property of each iView is set to the logical system name (e.g. RDV123, BDV123) rather than the alias.  We would like the role upload to set the "System" property to the alias names by default.  Does anyone know how to accomplish this?  Does anyone know why it doesn't do this in the first place?

    Thanks for the input.
    Right now my system connectors are all setup with their logical names (e.g. RDV123) as well as a generic alias that is used across landscapes (R3).
    My dilemma is transport to QA and Production. I could very well go into PROD and QA and make an alias on those production systems for dev (e.g. make an alias for RPR123 to also show as RDV123), but this would create conflicts.  I;d prefer to just use very generic aliases across all systems such as "R3".
    Is there no way into tricking the role upload into referencing some table to know that instead of logical name, use default alias so it will be transportable?

  • How do I install OS9 system folder on an eMac?

    I have a brand new eMac. It has OS 10.4.4 installed. I need to install an OS9 system folder in order to run Classic. I have an OS9 CD, but the eMac can't boot to it or run anything from the cd from OSX. The eMac didnt come with a CD that says anything like additional software or Classic Support. I tried booting to the OSX install CD's and doing a customized install. Classic support or OS9 was not an option.
    Any ideas?

    No new Macs can boot in OS 9, which is half the reason Classic was invented to emulate 9 while your Mac is booted in X.
    The disk set that came with your eMac does contain installers that will give you a System Folder for use with Classic over X, but not on the main disks…
    It's probably on one labelled Additional Software and Mac OS 9 but sorry, these things change from time to time and I haven't seen a recent eMac…

  • Do I need OS 9 System Folder and Applications?

    I am running low on space and am looking at things to remove from my internal hard drive. Is there any risk to removing the OS 9 folders? I have a 200G external harddrive with lots of space. Is moving the folders there a better option than deleting them or does moving them cause problems also if I might need them in the future?
    Thanks,
    Sande
    powerbook   Mac OS X (10.3.9)   12 in

    Hi, asinhk. The disk space you'd regain by deleting your OS 9 System Folder and Applications Folder is likely to be less, maybe far less, than one gigabyte. Check the sizes of those folders using the Finder's Get Info command to see how much space you're actually talking about.
    If you have no need at all to run Classic applications — you never do so in your day-to-day work, and you have no old, stored documents that you'll ever need to access in Classic mode — then you can safely delete OS 9 and its applications. It would also be OK to transfer the two major OS 9-related folders to your external drive, if you do need to run Classic sometimes, and if you'll have the external drive connected to the Powerbook whenever you need to use Classic. If you do that, you'll need to re-specify the new location of the System Folder to use for Classic in the Classic pane of System Preferences.
    But ultimately, if you are so pressed for hard drive space that removing OS 9 from your internal drive is going to make any significant difference, then you'll need a new, larger internal hard drive very soon even if you do delete OS 9. If you ever need to perform an Archive & Install of OS X, or you ever want to burn a DVD, you'll need at least 5GB of available space on your internal hard drive to do so. If you can't free up that much space on your HD right now without making agonizing choices about what to keep, you already need a bigger drive.

  • Corrupt OS 9 systems folder?

    Dear Friends,
    I am working on my church's computer. The original OS 9.1 is installed on one hard drive and a second hard drive is partitioned with OS10.4.8. The second partition has OS10.0 with fresh install.
    The goal is to be able to convert data from a church database application in OS 9 to the new version in OS X. When using classic in the OS 10.4 the system folder used is OS 9.1 from the first disk. I get a message to upgrade that folder to 9.2.2. I have tried to upgrade to 9.2.2 on the OS 9.1 disk but upgrade fails. After many attempts I have been unable to use the conversion program in the church data base application to update data base with new version of application in 10.4. I've tried so many work arounds I am now dizzy. Could you help me get this process organized and successful? The support staff at the database application have told me this is a Mac upgrade issue and that their software is working correctly. I can have the company do the upgrade but I need to have an archive of old church records in the new format.
    I think the problem is in the system folder from the old OS 9.1 software, but I cannot seem to get it to work properly. Without that step I cannot do the conversion.
    I can give you other info if needed, thanks.
    Church mouse 3

    Hi, churchmouse, and welcome to Apple Discussions.
    The Digital Audio PowerMac G4 was originally shipped with OS 9.1 installed, and can boot into that OS if a) the installation of OS 9.1 was performed using the original, model-specific disc that came with the computer, AND b) the installed OS is in good shape.
    There is almost no earthly reason to keep a copy of OS X 10.0 installed on any computer. If someone in the church has a grievous sin to expiate, using OS X 10.0 for a week or two would be a fitting penance. 10.0 was a beta version — barely half there, less than half ready, and pure misery to use.
    If I were you, I'd erase the partition that contains 10.0, use the original disc(s) that came with the G4 to install OS 9.1 on that partition, and then update that installation to 9.2.2 witht he downloadable OS 9.2.1 and 9.2.2 updaters (you can't skip 9.2.1). Then I'd designate the new OS 9.2.2 System Folder for use as Classic in the Classic pane of OS X 10.4's System Preferences, and put it to the test. OS X may want to update a few Classic-related files before Classic will open, but the updates should go well now. If Classic opens and works, test to make sure you can also start up the G4 from the 9.2.2 partition: you should be able to do that, too.
    If all seems to be well, copy any important data files that are currently stored on the OS 9.1 hard drive from it to the new OS 9.2.2 partition. After converting them to the new file format as needed and checking to make sure they open and work as desired, I'd suggest performing a Clean Install of OS 9.1 on the second drive.
    Contrary to what Beavis has written above, a Clean Install deletes nothing from the drive it's performed on; it merely creates a new, pristine System Folder on the drive and renames the old one "Previous System Folder," leaving that folder and its contents (and everything else on the drive) intact. The term "clean install" is frequently misunderstood and misused to mean an installation that first erases everything, and I presume that's what Beavis was talking about. That isn't what a real Clean Install does.
    Mac OS 8, Mac OS 9: Performing a Clean Installation

  • System folder still here but preference system does not recognize it

    Hi,
    I have just installed Tiger on my eMac and now classic won't start. It first tells me that classic preferences cannot save or read the preferences and then, as a second message, that the "system folder" is not available and ask me to use another system folder to run classic.
    I tried re-installing Mac Os 9 with the non-bootable software restore CD that came with the computer but the result is exactly the same.
    I am losing it. Is there a solution or shall I say goodbye to classic once and for all and put it in the trash?
    Thanks for your help
    Ibook G3, Emac G4   Mac OS X (10.4.3)   iPod mini, iPod 4G, iPod Video

    Hi, Mandianne. The second post by "Tatie" in this thread tells how s/he solved your problem.
    Another, much simpler tip you may want to try first, before going to the trouble of an Archive and Install, is this: open the Classic pane of System Preferences and click the Start/Stop tab in that pane. If your OS 9 System Folder appears in the small box under "Select a System Folder for Classic", select it. Then click the "Start"button below it and see whether Classic now starts up properly. I don't know for certain, but it seems possible that when you installed Tiger, this important link between OS X and the System Folder that you want it to use for Classic may not have been carried over successfully from a prior OS X installation, or (if you had no OS X installed before Tiger) it needed to be made for the the first time before you tried to start Classic.

  • Missing System Folder  in Classic

    I really need some help here
    Purchased an I BOOK G4 notebook .. mostly as a back up for some graphic programs.
    It is running a clean copy of OS X version 10.4.11
    Classic is missing the system folder and as a result i cant seem to install anything???
    Do not have any OS disks with the machine
    What are my options??

    Hello, and welcome to Apple Discussions!
    You will need a source for a valid and installable OS 9.2.2 system for use
    as Classic before you can install and use any pre-OS X applications...
    And you really need to have an OS X (tiger 10.4) retail or correct install
    disc set to support and maintain the system, and its license in the iBook.
    The computer model shipped with a machine specific series of install-restore
    discs and the OS 9.2.2 Classic would have been on one of them; usually not
    the main disc, that has OS X installers on it. Since that computer did not boot
    OS 9.2.2, the installer would be specific to the computer; about the only way
    to get an OS 9 from an optional OS X install disc, if you have software but no
    computer, the OS X has to see and recognize an appropriate installer, though.
    Since OS X is primary and OS 9 does not boot an iBook G4, you have to find
    a way to install OS 9.2.2 by drag and drop; or get ahold of a correct original
    install-restore disc set for that computer from some online source. There is a
    small chance that someone may have the right one for your build model iBook
    Used to be, you could call Apple sales support at 1-800-MY-APPLE and ask to
    speak to a product specialist about replacement original discs for the iBook G4
    and provide them with the product's serial number, and order a new replacement
    set of install discs, for a reasonable fee. The correct Apple Hardware Test is on
    those discs, so that was the best deal going. The original software could have
    been a version of Panther 10.3.9, and if the computer CPU was faster than
    800MHz it would not dual boot OS 9 and OS X. This is where details matter.
    You may be able to identify your iBook by serial number by using the search
    link in everymac.com, to help find which iBook G4 model it really is, and then
    know more about upgrading it, getting replacement or upgrade software, and
    other important facts. Such as what Apple Hardware Test was in original s/w.
    Any other OS 9.1 or 9.2(.1) install disc would not work, since they either would
    be for some other computer and made to install when booted (C key held on start)
    or, would be too old for the direct install method to work, it won't under OS X if
    not the correct disc set for the computer.
    You may be able to find a way to install an OS 9.1 or OS 9.2 on an external HDD
    or flash USB drive, and update it to OS 9.2.2 using download update files, and
    then copy (drag/drop) it into an iBook G4, for use as non-boot Classic 9.
    On a trial basis and to test some hardware, I was able to use a newer iBook G4
    second install disc which contained an OS 9.2.2 install, and use it as Classic in
    a different computer running OS X, by use of Pacifist utility. This takes a packet
    of data out of the disc and then installs it from the desktop, directly. It can work.
    But there are so many variables some of the things that Could Work, may Not.
    Some suggest you may be able to make a copy of a working OS 9.2.2 system
    folder and an Applications 9 folder from a working computer and use them as
    Classic in some other OS X PPC model of Mac that does not boot OS 9.2.2.
    You may be able to use a USB flash drive to copy an OS 9.2 system and its
    applications (9) folder. You may even be able to test it as a working idea,
    while it still is on the USB memory drive; by pointing the Classic preference
    panel (in System Preferences) to look for a Classic system there. Or drag
    and drop it into the computer. The good about old OS 9.2 & before, is the
    simple way to move a system around; and OS X won't allow that method.
    And of course, OS X 10.5 Leopard can't use an OS 9.2.2 Classic.
    The original install disc set would be the best bet. Is there any chance the seller
    may have misplaced the software set belonging to the computer you bought?
    These are considered a part number of the computer, as such, part of the sale.
    If bought from a company who fixes and resells computers, do they offer any
    optional software for an additional fee? The discs should be included, but in
    several instances, people buy a computer second-hand and have no software.
    You may have to contact resellers and maybe even auction sites, once you can
    identify the exact set of software you need; companies such as welovemacs or
    others you can search for may have something; most are overpriced, to me.
    The ebay auction tales are enough to scare me into keeping the original discs
    and include them when I forward the computer to some other future user.
    I have not bought any replacement software online, and OS 9.2.2 installers for
    a specific OS X running computer, to be used as Classic, narrow the field; since
    the OS 9 system installer on iBook disc media is often made for that model.
    Well, I have ideas. And they seem to work better for me in person than when
    I've told some persons about them online. Just as well, if there's some glitch
    you can avoid by finding the correct discs (in the land of plenty) that's good.
    To *search " OS 9.2.2 install CD " in google* may bring up some choices,
    but I have no experience with retail resellers of old or used software.
    In a few cases, if you get very good at identifying iBook G4s, you may
    be able to find a broken one exactly like yours with the original software.
    These should be relatively inexpensive; but have very limited use discs.
    Hope this may help, somewhat...
    Good luck & happy computing!
    +PS: I think I need a little more coffee!+

  • 10.4.7 Update and Classic System Folder

    I installed 10.4.7 with no problems.
    However, I needed to start Classic to run an old application, and when it started up, I got a message stating that changes were required. I allowed the changes to be made and the old application started up with no problems.
    Today I tried to boot up my QuickSilver using the Classic partition. (I've done this routinely for the last two years to do repair work on my 9.2.2 partition.) The machine would not boot. Instead it booted using my regular 9.2.2 System folder.
    When I checked the start-up folders using the OS 9.2 Startup panel, it showed the Classic system as version 9.2.5. (Using the 10.4.7 Startup pane, there is no version given at all, it just states "Mac OS.") The system file was updated during the changes to Classic. The QuickSilver will no longer boot from this partition.
    I would still like to boot from the Classic partition. Is there a workaround for this?
    QuickSilver   Mac OS X (10.4.6)  
    QuickSilver   Mac OS X (10.4.6)  

    Apparently during the "update" of the Classic System folder, there was a glitch. I replaced the Classic System File using the one from my OS 9.2.2 System folder, and I can now boot from the Classic partition AND Classic runs fine from OS 10.4.7.

  • Trying to install the classic system folder

    Hi All, I have 10.4.11 installed on my G4 Cube and would like to use OS9 applications. I understand that I have to use the Classic environment and I have followed the apple instructions to restart the MAC with the OS9 disk and install. However, once I get to the OS9.2.1 desktop. the installer says that I cannot write over my existing OS. I cannot seem to see an option to installed the classic system folder..... The only disks I have access to are Retails OSX 10.4 and retail OS9.2.1.. Any ideas? Thanks Garry
    Message was edited by: Garry Westwell

    Yes, when booted into 10.4, double click on Macintosh HD on the Desktop, what folders do you see there?
    Also, open Disk Utility, click on the whole drive on the left, click on the blue Info button, does it report OS9 Drivers installed like mine...
    Name : Other World Computing
    Type : Disk
    Disk Identifier : disk2
    Media Name : WDC WD50 00AAKB-00YSA0 Media
    Media Type : Generic
    Connection Bus : FireWire
    Connection Type : External
    Connection ID : 512381015163508
    Partition Type : Applepartitionscheme
    Device Tree : fw/node@1d20200660274/sbp-2@c000/@0:0
    Writable : Yes
    Ejectable : Yes
    Mac OS 9 Drivers Installed : Yes
    Location : External
    Total Capacity : 465.8 GB (500,107,862,016 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 2
    Partition Number : 0

  • Can't find classic system folder

    I recently bought a used Mac that has OS 10.4 installed on it. Everything works fine except for classic, which doesn't seem to be installed. I was told that I can simply copy the system folder of classic from another mac which already has it installed and I should be good to go. Now, I need to explain to a friend via email how he can locate this folder so he can make me a copy. Can someone tell me just where this classic system folder is located? Is it under the hard drive with the main system folder? I would love to get my classic apps going. Thanks fellas (and chicas).
    Regards,
    Billy M.

    This may work. Keep in mind that if you just drag and drop a copy of a System Folder, you also drag and copy things that may have been installed later on the host machine, such as third party extensions, etc.. that my not work on your machine. If you do this, and have issues, you can drag the System Folder to your trash and be done with it. For the best results, try to find an old OS 9 install disk. There are used ones about, eBay sometimes. The one you want is the retail version of OS 9.1. There were two free updates available to this, still posted in places you can download, to bring it up to 9.2.2, which was the last and latest Classic release version. These may still actually be available on the Apple site, if you know where to look to find them. They are necessary to make your Classic folder more compatible to run in Classic mode within OS X.

  • Help with installing a internal HD to make a classic system folder.

    Ok so I've been having one **** of a time trying to make this classic system folder (earlier thread: http://discussions.apple.com/thread.jspa?threadID=2105407&tstart=0 ).
    I have the original OS 9.0.4 disk, I didn't save my system folder when I went OS 10.4 so now I'm trying to make one because I can't make one with just 9.0.4 I need to make a 9.2.2 by just updating using IE 5. Should I install the internal HD as a Master Single, Master w/Slave presets, or just Slave then restart on that HD with my OS 9.0.4 disk in holding down c? Then move a copy of the system folder over to the other HD when I get it upgraded?
    Hold on I got another idea just replace the HD that's in it now install 9.0.4 upgrade it then move it to my external if it can read it then put the old HD back in and the new one (which should I put that one back in as slave?) and tada.
    Which way do you think will be the easiest and less painful way? Also do I make the second internal HD a Slave and the start up one as a Master w/Slave presets?
    Message was edited by: HEMIII

    Yep I just got done doin' just what you said and now I'm updating classic as we speak. Of all the questions I've had with trying to get classic to work I wish I would of thought of this first. Thanx for the simplified way of saying it. I'll post this in my other thread too, too bad I can't say I solved it myself, lmao.

  • Classic System Folder Disappeared or Got Trashed By Mistake

    I upgraded from OS 10.3.9 to 10.4.10, and from a G3 iMac to a G4 iMac -- all because the G3 died and I have had to put its hard drive into a USB enclosure to access it, and because one of my LaCie backup drives now needs a complete Data Rescue II.
    The problem is this: Classic will not run; an error message appears which says "No System 9 Classic Folder installed." When I upgraded to 10.4, I did a clean install which certainly ought to have included the necessary pared down system 9 necessary for Classic. On the G3, I had both 9.2.2 and 10.3.9 installed, and I suppose I might install 9.2.2 from disks if that will give me a system folder with which to run classic. I think a system folder for Classic 9 got lost or trashed, and needs to be reinstalled. Is there any way to do this?
    To reconstitute my G3 10.3.9 System to run the now encased former CPU hard drive, should I install a 10.3.9 system directly to that hard drive, boot from it and thereby access all it contained (including whatever made Classic run on that machine)? Should I install 9.2.2 on that same hard drive? Or install 9.2.2 on the new G4iMac running 10.4.10?
    It is so easy to make big mistakes mishandling system folders and contents. Any help and advice is greatly appreciated.
    Charles

    Again much thanks, Kappy. The Classic Folder in the Library in the Previous System is unfortunately empty. This may be because the Archive was created onto an external hard drive(?). My present machine will not permit me to install OS 9.1 - 9.2 because it cannot start Classic (without a Classic Folder already on the machine:- Catch 22.)
    Might I be able to use this G4 iMac in Target Mode, firewire connect it to the eMac G4, then try to install from the installer disk mounted on eMac or directly from OS 9 CD startup disk running the eMac? Somehow I have to get some Classic Folder onto the iMac G4 before it will allow me to do anything with the installation disk. It will not even let me install onto an external hard drive. The eMac however has Classic working properly, and will allow all these things; and the eMac and iMac are already connected as an ethernet network for file sharing and printing (if that mode could be used to install onto iMac from eMac.)
    I'm sure there is some way to do this; I just can't get past the necessity for Classic to start first on the iMac within System 10.4.10 -- since there is no Classic folder attached to an OS System 9 to allow it.
    Do any of my work-around ideas for targeting the iMac from the eMac have merit? If I haven't entirely exhausted your patience, I would deeply appreciate your advice.
    Thanks for taking your time to help me.
    Charles

  • Classic 9 doesn't work because it doesn't have a system folder

    Ok Classic 9 doesn't work because it doesn't have a system folder. So why is it even there! it's messing me up! Can anyone help me with this?

    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

  • Classic will not recognize system folder

    I have installed Classic from the cd that came with my computer. The system folder for os9 shows up in root next to the osx folder, but there is no 9 on the folder. When I try to run classic in system preferences, it says os9 is not installed. I've seen other postings saying to "bless" it by dragging the finder from the os9 system folder to the desktop then back again, but this does nothing.
    Any help would be greatly appreciated!!!

    Hello berne04,
    Did you try this (from the link that Texas Mac Man posted)? Try it instead of dragging and dropping the Finder.
    No "blessed" Mac OS 9 System Folder
    If Classic doesn't start, but Mac OS 9 is installed, the System Folder may not be "blessed".
    Open System Preferences and choose Classic from the View menu. You may see an alert box with the message:
    "No startup volume: There is no volume with a system folder that supports starting Classic. Please install Mac OS 9.1 or later."
    It may not be necessary to reinstall Mac OS 9. Try these steps:
    1. From the Apple menu, choose System Preferences.
    2. From the View menu, choose Startup Disk. The Startup Disk pane appears.
    3. Note the current Startup Disk selection, which is a Mac OS X volume.
    4. Click the Mac OS 9 System Folder you want to bless.
    5. From the View menu, choose Show All.
    6. From the View menu, choose Startup Disk.
    7. Reselect the volume you noted in Step 3.
    8. From the View menu, choose Show All.
    9. Quit System Preferences.
    Hope This Helps,
    Jeff
    Mini 1.25, 12 Al PB 1.5, PTP 250, WS PB G3, 3xiMac 400 (OS 9.1)   Mac OS X (10.3.9)   Wireless KB/Mouse, AEBS, 80 GB OWC FW HD

Maybe you are looking for