Upload the MVC File in window server 2008

i want to upload the mvc file in server 2008 
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me. 
Thank you

On Tue, 10 Feb 2015 18:03:54 +0000, madudhula mahesh wrote:
i want to upload the mvc file in server 2008 
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me.
This forum, as the name should indicate, is only for Windows Server 10
issues. Since your question appears to be about IIS repost to:
http://forums.iis.net
Paul Adare - FIM CM MVP
Q. how many hackers does it take to screw in a light bulb?
A. Huh?...What? Oh, it's dark in here?

Similar Messages

  • Missing Files in Windows Server 2008 server

    There are a lot of missing files in a server that we manage.
    There are no scheduled changes or activity prior to this incident.
    Is there a way to determine how the files were deleted?
    Are there any reported issue regarding sudden disappearance of files in Windows Server 2008?
    What are the events to look / find at the logs?

    Hi,
    You can check the event viewer to see if any related logs existing.
    If you enabled Audit Objecr Access with both success and failure events in group policy(Computer Configuration>Windows Settings>Security Settings>Local Policies>Audit Policy>Audit Object Access - Success/Failure), add auditing to the
    folders/drives and enable auditing for "Delete" and "Delete Subfolders and Files", then you can check that under security log in event viewer.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • CHM files and Windows Server 2008

    RH 7, HTML
    Support person has a customer trying to view .chm files in Windows Server 2008. They went ahead and tried the "normal" registry fix to view chm files over a network, but that didn't not fix the issue.
    My understanding is that chm files can't be viewed in Windows Server at all, but thought I'd verify - is there any way to view chm files in Windows Server 2008?
    Thanks,
    -Jeff

    Jeff,
    I don't think that anything has changed in Windows 2008, and .chm files are certainly viewable in this version of Windows. However, it may be that the customer needs to tinker with the security settings in Internet Explorer to make remote .chm files viewable. See this article for details:
    http://weblog.helpware.net/?p=50
    To ensure that the correct registry changes are being made, the customer could try making them with the free HHReg utility. It's available from here:
    http://www.ec-software.com/products_hhreg.html
    Pete

  • OS Error in starting the OCFS Service on windows server 2008

    Hi,
    Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
    ERROR : OS in Error in starting the OCFS Service
    Can any one please tell what could be the issue ..
    Thank You

    Solved this after some trawling through xml configuration files on the server.
    The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
              <ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    changing this to:
              <ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    and the OC4J container starts successfully.
    Regards,
    -Haakon-

  • Trying to zip / compress a file in Windows Server 2008 & SQL Server 2008 R2 server

    Hi,
    We are trying to zip / compress a xml file that has been created by retrieving data from SQL Server 2008 R2 database running on Windows Server 2008.
    To compress this file, we cannot use any external softwares like 7-zip or WinZip.
    So, we would like to know if there is any windows default compression tool that works on command line to compress the file?
    As this is a live server we cannot apply any other softwares.
    Please suggest any ways to do it in Windows Server 2008 machine.
    Thanks & Regards
    Kalyan

    Hello Kaylan,
    and for uncompress what can I use
    This is a way to do it in SSIS
    http://sqlblog.com/blogs/jorg_klein/archive/2009/08/27/ssis-unpack-a-zip-file-with-the-script-task.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Upload of pdf file from windows server  in to DMS content server

    dear all,
              kindly help me out in uploading the pdf file in DMS content server from windows server. let me know the steps how to complete this task. its a little bit urgent.
          thanks in Anticipation
              vikram & kiran

    Welcome to SDN
    you can use FM BDS_BUSINESSDOCUMENT_CREATEF to do this
    check this thread
    Re: convert file details
    or this code sample
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
    Regards
    Raja

  • Reading .txt file on Windows Server 2008

    I have a Java 7 application that we distribute, and it reads configurations from a .txt file distributed with it, in the same directory as the .jar file. On Windows 7, windows XP, Windows 8, this works fine, but on our server, running Windows Server 2008, this fails. It is a simple check that fails:
    Path p = Paths.get("config.txt");
    if(Files.isReadable(p))
    This will not work on Windows Server 2008 r2. It suspect that it somehow hasn't got read permissions, but I'm not sure.
    It also fails if the absolute path is specified.

    And what if you use the regular old fashioned standard IO File class and not Files to check if the file is readable (File.canRead())?
    Methinks (or to be honest: I guess) there is something odd with the creation of the Path object on your windows server file system, but I wouldn't be able to tell what exactly.

  • Backup Error : The Data Is Invalid Windows Server 2008 R2

    Hello,
    I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
    Error The Data is Invalid.
    Obs: I can make backups for System Reserved Partition .
    I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
    ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
    Now I have the same problem and I delete the
    Temporary ASP.NET Files , but it is not working , I received the same error on backup:
    "The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
    When I try vssadmin list writers, Everything is ok , "No error" .
    I tried to run :
    net stop "System Event Notification Service"
    net stop "COM+ Event System"
    net stop "Microsoft Software Shadow Copy Provider"
    net stop "Volume Shadow Copy"
    cd /d %windir%\system32
    net stop vss
    net stop swprv
    regsvr32 /s ole32.dll
    regsvr32 /s oleaut32.dll
    regsvr32 /s vss_ps.dll
    vssvc /register
    regsvr32 /s /i swprv.dll
    regsvr32 /s /i eventcls.dll
    regsvr32 /s es.dll
    regsvr32 /s stdprov.dll
    regsvr32 /s vssui.dll
    regsvr32 /s msxml3.dll
    net start "System Event Notification Service"
    net start "COM+ Event System"
    net start "Microsoft Software Shadow Copy Provider"
    net start "Volume Shadow Copy"
    But is not Working
    Any Advice ?
    Thank's

    Hello Lucian,
    the issue may be caused by an invalid entry inside the following registry sub tree.
    HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
    Please open the registry editor with regedit.
    Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
    Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
    Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
    Please look for errors in application event logs after you initiate backup on the server
    Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

  • Problem in uploading the rpt file in BO server

    We have the enterprise edition of Business Objects server, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central Management Console Log in, it shows in progress up to 20 min, after that we got the connection time out error. The same report is uploaded easily in the Business Objects server, which is available in windows machine. Solaris environment only we got this error.
    Any bodies help me why BO, which is available in Solaris server, is not supporting to upload the rpt file. (If any installation problem, or need to configure some parameters).
    RPT file upload only have this problem, other type of files we can easily uploaded.
    Thanks in advance.

    Hi,
    That's a really old post up there, and the forums have since been redesigned.
    The forum finder is over here: http://scn.sap.com/docs/DOC-18971
    A good collection of BusinessObjects related links can be found here: http://scn.sap.com/docs/DOC-30682
    This forum space http://scn.sap.com/community/businessobjects-bi-legacy-products is the most appropriate one if your product question is similar to that above.
    Regards ,
    H

  • How Create Dos boot able USB for Create Ghost for NTFS File and windows server 2008

    Hi
    How Create Dos boot able USB.
    Which show all Partition Drive in dos mode for NTFS file system.
    I have Windows Server 2008 which have NTFS File System of Hard disk.
    I have not CD / DVD Rome and I cannot attach the CD / DVD because we have no permeation by our organization.
     but i wanted to create Ghost.
    So i need boot pc by other media USB.
    Please help me.

    Hi
    I just assembled a cd which boots dos and can read and write to ntfs drives.
    Should you be interested in the iso image file which you can use to write to cd or usb please email me at [email protected]
    Thanks
    Nuno

  • Can't able to Access the internet in my Windows server 2008

     I installed windows server 2008 server in my machine, it has only windows sever 2008 single OS.
           Now my problem is, i am not able to Access internet, I tried some intel softwares, to install Ethernet drivers, but no use.
    What i have to do now..? 
                                                       Please help in this issue,
                             Thanks in advance                              
                    surendra mannem
     

    Hi,
    Please confirm you have configured the correct TCP IP address, if you have the static IP address please confirm your default gateway and the DNS server address 
    is correct and work properly.
    More third party information:
    Windows 7 Static IP
    http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/
    How to Set Static IP Address in Windows 7
    http://www.youtube.com/watch?v=wmYBBHvfpTg
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Problems with the shared files of Windows Server 2003 and Mac

    I have some Mac computers in the domain of my LAN Network, and when I share a folder in Windows Server 2003 sometimes the Mac can not see and sometimes yes, but lasts a long time so that they can view folders. I have installed the protocol Apple Talk on the server and File Server and in the Domain Server.
    The folders when users have no security users or groups are immediately with a connection AFP, but if they have not already created security can be displayed with a connection AFP, but if you can visualize a connection with SMB, but I can not work with Quark 6.0 Pro files.
    What can I do to solve this problem.
    Asalomon

    The newer printers:
    canon irc3100
    canon ir5020-i have working on osx side, not in classic
    Older printers:
    hp laserjet 5m-2 of these
    hp 2200
    hp laserjet 5si-2 of these
    hp laserjet 4100
    These are installed on windows 2003 with mac print services running. I need to know what option i should use in osx when installing these network printers on these macs. When i go to printers folder, i chose windows printing then it prompts for the ppd file. I found it for the ir5020 but not the ir3100. I really need to test the hp laserjets in osx too. Ill post up when i test those. But that one canon (ir3100) is bothering me. They are roughly the same age and the drivers on the site don't seem to work.

  • DFS question: What does "Set Active" mean on the DFS tab in windows server 2008

    When I logged into server and went to the DFS tab to check and see if it was replicating between two of the different shares. I saw one share marked as "Active"  What does that mean?
    I also seen a button that said "Set Active"  I am guessing its related to my above question.
    I am guessing its the root?  The directory that others pull from or something?   I tried to google that all over and could not find anything specific to this question which I found very odd.

    If you have multiple folder targets in the namespace then the 'Set Active' button is how you change the current referral (at a client level).  Only enabled folder targets will be listed.  Users can choose a different server if they wish (maybe
    for performance reasons).

  • Files Transfer from Windows Server 2008 R2 on Mac

    Hi,
    How can I transfer files from "Windows Server 2008 R2" on Mac? as now I am using 2 App (Microsoft Remote Desktop & Fast Remote Desktop) which allowed me everything but not transfer files on Mac, so any other recommendation or salutation?
    Thanks

    Hi,
    You need to configure folder redirection.
    Folder redirection enables access local folders during the remote session. Click the + button at the bottom of the dialog and choose a folder you want to have
    redirected.
    Configure Folder Redirection:
    1. Click the + button.
    2. In the Add Local Folder window, enter the following information:
    l 
    Name: Set a name for the folder to be available during the remote session.
    l 
    Path: Select the path to the folder to be available during the remote session.
    3. Click the close button to save the remote desktop.
    Getting Started with Remote Desktop Client on Mac
    http://technet.microsoft.com/library/dn473012
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Windows Server 2008 R2 - access from Anywhere

    Dear All,
    We have small business network in our institutions. Our network infrastructure is follows as,
    Windows Server 2008 R2 with Domain Controller - Roles installed are ADDS, File Service, WDM, DNS, DHCP
    Fully Qualified Domain Name : XXXXXX.local
    Client System: Windows 7 Ultimate 32 bit systems 30 Numbers.
    Internet Connection: 1 Mbps download speed and 420 Kbps Upload speed from Airtel.
    Router: TP-Link ADSL Router.
    So far we have used our server within our premises, the router acted as a gateway and supplied internet service for server and client system. Now we want to access the server from outside of our network from i.e. domain users logon from anywhere from the
    world. What are the requirements for this kind of setup and steps to implement this setup.
    Thanks and Regards S.R. Karthick System Engineer

    Hi,
    Firstly, it is not recommended to install the DHCP role on a DC.
    In addition, you can use the DirectAccess feature in Windows server 2008 R2 so that the clients
    running Windows 7 Ultimate
    can securely connect to the corporate network from any location without any type of traditional VPN. For more detailed information, please refer to the link below:
    DirectAccess for Windows
    Server 2008 R2
    Best regards,
    Susie

Maybe you are looking for