Upload to ftp host - 503 error 'you are not logged in'

Really struggling with this one - my upload (to united hosting server) crashes at approx 60% giving the above reason. The site files are in total 232mb (big site) and my broad band upload speed is shocking (approx 30kb up...... yes kb!)
will the ftp 'time out'?
My other sites are loading fine but having problems with www.brookstreetschool.co.uk. I'd added somewhere in the region of 10 new slideshows that had quite a few images in them but they were all web optimised - before that the site was fine, now it won't upload - tried 4 times now over 2 nights.
Any help or advice would be gratefully recieved.
Alan

Looks like due to the slow upload speed (or higher latency), the FTP connection to your third party web host is breaking eventually logging you out (disconnecting from the FTP server) and resulting in a 503 (Service unavailable) error.
http://pcsupport.about.com/od/findbyerrormessage/a/503error.htm
Are you able to test this on a network with faster/stable upload speed possibly isolating the issue to your network? Or are you able to export the site as HTML and upload using a third party FTP client? Do take a look at the above article as well for common fixes to try in such cases.
Thanks,
Vinayak

Similar Messages

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

Error: You are not a receiver of the work item in Leave Request Deletion

Hi All,
We are using customized leave request workflow which is the copy of standard leave request workflow.
All tasks are assigned as general tasks and assigned in SWFVISU.
But the employees are unable to delete the leave request with Sent status.
Scenario:
Employee applies leave.
Now when the employee tries to delete / cancel the leave request before approval (Status is SENT), the employee is getting the error
"You are not a receiver of the work item".
This issue is happening for only the leaves which are in "SENT" status and though the employee is able to delete the "REJECTED" leave requests. The employee is also able to change / modify the leave requests without an issue.
We are on EHP 7 with SP level 22 and running this on Portal 740.
I have gone through the threads related to this issue but did not get any success.
Please let me know if I am missing something that can resolve the issue .
Regards,
Anurag

Hi Sid,
As I mentioned above, we are on EHP 7 with SP 22 and hence the above note 1066288 does not apply in our case.
Moreover, we're using WDA based application and the above note seems to be the one for XSS based on WDJ.
Regards,
Anurag

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

ESS : medical claims : error you are not authorised

Hi all ,
we have applied support pack all the way SAPKE47032 to SAPKE47070 ..,
ESS is working fine except medical claims i got error
" you are not authorised to view "
pl help .
anu

Hi Anu,
Please check the missing authorization in su53
Hope you are using the composite role SAP_EMPLOYEE_ERP for the employee
Thanks and Regards
Reshma

YOU ARE NOT LOGGED IN AS RELICATION ADMINISTRATOR

Hi,
Freinds i need your help. as i am not able to start replication the error it throws like "YOU ARE NOT LOGGED IN AS REPLICATION ADMINISTRATOR".Please help me as its realy urgent.
Thanks
Ashish
Edited by: ashish 1901 on Feb 11, 2013 9:31 PM

Hi,
Check follow link, you have to log in as repadmin .
<<http://docs.oracle.com/cd/E11882_01/server.112/e10707/rarrepsite.htm#i10539>>
Regards,

Can't upload to FTP Host - 'Folder on server does not exist'

I haven't tried updating my site for about a month now. I went onto Muse last night and while uploading to the FTP Host, it kept freezing at about 66% while handling the image files.
This was odd because I'd never had this problem before, but I noticed there was an update, so I decided to get Muse 2014.2, as maybe this could fix my problem.
I made the same changes to my site and went to upload to FTP Host. After convincing Muse my details were correct (kept being told I had been timed out and my username or password was wrong) I was finally connected to the FTP server. However, my 'Folder on Server' (httpdocs) doesn't seem to exist according to Muse.
I spoke to GoDaddy's support team for over an hour as we tried variations on the httpdocs folder and we had no idea why Muse wasn't accepting this (they also checked the file exists). They tried Filezilla and that was fine, so it's obviously a problem with Muse. I asked if I should just click on the option to create the httpdocs folder, but GoDaddy advised against it.
I tried contacting the Adobe Customer Care chat thing, but I don't even know what's happening with that ("chat is unavailable . . . we'll be with you shortly" . . . eh?)
If anyone has a solution to either my problem on the old Muse or this new problem with Muse 2014.2 (ideally this one) then that would be great.
Also, I'm only using Muse because it cuts out all the complex stuff, so go easy on me when explaining anything that isn't "you just need to click this"

UPDATE: I uninstalled both versions of Muse and re-installed the 2014.2 version to see if that would work, but it still doesn't think the httpdocs file exists.
(As a result of uninstalling the old Muse, my problem regarding the freezing at 66% is now irrelevant. Just need help with Muse not accepting the httpdocs folder)

UWL workitem error: you are not a receiver of the work item

I have created a workflow with 2 decision steps. When testing the workflow through the SAP inbox (SAP Business Workplace), when the first agent approve the workitem, it is forwarded to the second agent who can also approve or refuse the workitem, which then ends the workflow.
When testing the same process in the portal UWL, the first agent receive the workitem and approve it. The second agent receive then the workitem, but when I open it to approve it, I have this error message: "you are not receiver of the workitem" !!
How come I am the right receiver of the workitem in R/3 and not in the portal ? We are using a CUA so users in the portal and R/3 are the same, the webflow connector is working, SSO has been set up.
Thanks in advance for your help.
Thibault

I have registered a UserDecisionHandler to display the task. Now the error message is gone and I am the receiver of the workitem. But the new problem is that when I try to approve or reject the workitem, I get this new error message:
Function is obsolete (successor: SAP_WAPI_DECISION_COMPLETE). It looks like the handler is trying to use a former function but I have no idea where I can find which function is called to process the decision.
Any ideas ?
Thanks in advance for your help.
Thibault

Error : you are not assigned to a position

Hi Seniors,
I am getting below error though I have assigned proper position in R/3 and also I have linked this with communication info type 105 using PA30. I am not able to see my data in portal.
Please help...
Regards,
Ritu

Hi Ranjith/ Luke,
I re-checked the OM- PA configuration and again try to maintain A012 relationship as well... but again the same error ... " You are not assigned to a position "
Please help
Regards,
Ritu

ERROR: "You are not assigned to a role" in BEx

Hi,
I have a user BEXUSER. In PFCG, I have assigned this user to a role ZR_USER_ROLE.
However, when I tried to open a query in BEx Anlyzer through Open > Workbooks > Roles toolbar, I could not find any workbooks assigned to this user.
Next, I tried to open a query using Open > Queries toolbar, I chose a query and tried to click Enter in Role icon. However, I am prompted with a message saying "You are not assigned to a role".
How is this possible when I have already assigned this user to a role. I have checked PFCG and confirmed that the particular role contains this user. Can someone explain about this?
Thanks

I am getting this exact same error, and the values that I have set in my query developer's job role are the following :
S_USER_AGR
ACTIVITY = 01, 02, 06, 22
ROLE NAME = {list of roles that the user should be able to save queries to}
S_USER_TCD
TRANSACTION CODE = RRMX
The user still receives the "you are not assigned to a role" error message when pressing the "save to role" button for a workbook.
In the ST01 authorizations trace, I see that the user is FAILING the authorization check for S_USER_AGR, but is failing the check for role names that he / she not supposed to modify.
So those failures are good, but they seem to prevent from saving the workbook to any role ...
How can it be setup so that the user can save workbooks to roles that were inteded to be saved to, without getting the "your are not assigned to a role" error when trying ?

Error: You are not a receiver of the work item in Leave Request Approval

Hi all,
I have copied the standard leave request workflow and done the customization as per my requirement.
Agent assignment for all the tasks are General Tasks.
We are facing below error when we are trying to approve the leave request from MSS UWL.
"You are not a receiver of the work item.".
This started happening after implementing the note 1501377 which is for clearing the approved leave request
workitems from UWL .
i have gone through the threads related to this issue and tried given solution but no success .
Please let me know if anything else is missing since its happening after implementing the note.
Thanks,
Santosh

Able to resolve the issue :-).
i was using Fork since my workflow is a two level process.
so the workflow was travelling to both branches one was in ready state another was in waiting state(48hours deadline)
having different agents.
i debugged the 1501377 note code when leave is approved it is looking at last workitem of the request which is waiting state workitem in my case and I was trying to approve the leave from user who is in ready state. then it throws the error.
So i have changed the design of workflow. i have done below things for two level process.
i will have requested end for approval task with outcome in that branch i kept second level approver. My questions
1) i am planning to do write below code to post the entries into infotypes after approval by managers. is it ok or any suggestions?
   CALL METHOD cl_pt_arq_processor=>post
      EXPORTING
        im_request =
      RECEIVING
        ret_value = retrun
2) how to complete the WF if the 1st manager misses the deadline and WF goes to second manager?
Please let me know.
Thanks,
Santosh

Provider hosted App Error: You do not have permission...

Hi everyone,
i'm using SharePoint online. I opened a provider hosted app and when I run this I get this error:
"Access denied. You do not have permission to perform this action or access this resource."
when I did debug I notice that it fall in this line:
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"]
and "webRequestEventArgs.WebRequestExecutor.RequestHeaders"
is empty.
what can I do?
thank you!

i'm trying to add an item ti my list:
protected void Page_Load(object sender, EventArgs e)
//constant string SharePoint principal
string SharePointPrincipal = "00000003-0000-0ff1-ce00-000000000000";
var contextToken = TokenHelper.GetContextTokenFromRequest(Page.Request);
Uri hostWeb = new Uri(Page.Request["SPHostUrl"]);
string realm = TokenHelper.GetRealmFromTargetUrl(hostWeb);
string appOnlyAccessToken = TokenHelper.GetAppOnlyAccessToken(SharePointPrincipal, hostWeb.Authority, realm).AccessToken;
using (ClientContext clientContext = TokenHelper.GetClientContextWithAccessToken(hostWeb.ToString(), appOnlyAccessToken))
if (clientContext != null)
//ShariqTest is a custom List in my SharePoint site
var myList = clientContext.Web.Lists.GetByTitle("ListName");
ListItemCreationInformation listItemCreate = new ListItemCreationInformation();
Microsoft.SharePoint.Client.ListItem newItem = myList.AddItem(listItemCreate);
newItem["ColumnName"] = "Testing ";
newItem.Update();
clientContext.ExecuteQuery();
"[and the webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization
is in TokenHelper.cs.
what do you think my problem is?

Does Time Machine Backup When You are NOT logged in?

I do not normally leave myself logged in since there are multiple people in my family and they have their own accounts.
Does time machine run backups when I am not logged in?
Does it wake the computer from sleep to run a backup every hour? Day?
If TM does not backup when I am NOT logged in, should I leave myself logged in by switching users back to the login screen?
(On a side note:) Is there a way to make it so that when a screen saver activates, and someone hits a key, it goes back to the login screen instead of the desktop?

Mike Delaney wrote:
I do not normally leave myself logged in since there are multiple people in my family and they have their own accounts.
Does time machine run backups when I am not logged in?
Don't know
Does it wake the computer from sleep to run a backup every hour? Day?
No
If TM does not backup when I am NOT logged in, should I leave myself logged in by switching users back to the login screen?
(On a side note:) Is there a way to make it so that when a screen saver activates, and someone hits a key, it goes back to the login screen instead of the desktop?
Yes, in System Preferences->Security check "Require password to wake...."
You can also tick "Log out after x minutes of inactivity" which would require a new login.

Every time I try to load an app it says you are not logged into iTunes

Every time I try to load a new app it says I am not logged into iTunes

Do you share your pad with someone else - are you still signed in on their account?
Then check in settings\restrictions that Apps is not restricted - if all ok go and Open iTunes , select music (can use others) scroll down to bottom of page and tap on your email at left. Tap sign out, then repeat and sign in again. if signin successful, try again. If it fails.
Go to settings\general\reset and select Reset settings, try again.
If it still fails - Connect to your PC by cable and see if you can download an app from the Store using your PC's iTunes - If you cannot - right click your device at left hand side and select reset warnings, then navigate to Library, Apps and check at bottom of page if any updates/downloads are pending - update\download as necessary.
if you can download an App using the iTunes store on your PC - select sync whilst still signed in. Try again using your ipad's Store
Does this resolve your problem?
If still having problems, in Itunes select Store, then Home page, then using quick links at right select Account. verify all details are correct and your pad and PC are listed in Authorised devices.
Sign out of iTunes and close with your device still connected - Power off your device by holding down the power and home buttons together - when red slider appears slide it across to power off. Re-open iTunes on your PC and under Menu\Store sign in. power on your iPad and try again.
If problems still persist - check with customer support that there are no problems with your listed payment method\card restrictions on your store account.
Regards, Ct

Upload to ftp host - 503 error 'you are not logged in'

Similar Messages

Maybe you are looking for