Uploaded 1.2, now Ipod is frozen and touchpad won't work...
OK! So, my ipod was working fine this morning, perfectly! Now, after i donwloaded the new 1.2, it seems to have frozen, or something. I tried to reset it, and it resets fine, then brings me back to the start up menu but the touchpad doesn't work. I can't scroll, i can't select. I tried to restore it, and I have the same problem. When i connect it to Itunes, the computer recongnizes it, but then it freezes on the do not disconnnect sign. I don't know what is wrong, and I am getting kinda ****** off. Please if anyone can tell me what is wrong I would really appreciate it. I just can't believe that the touchpad would just break like that. Any advice?
gateway Windows XP
I just attempted this step to fix my "iPod on Ice" problem and it actually worked like a charm. I have pasted the procedure below...maybe it'll help others!
*To reset an iPod with a Click Wheel, including:
Fifth Generation iPod (also known as iPod with video)
iPod nano
iPod with color display (iPod photo)
iPod (Click Wheel)
iPod mini
iPod mini (Second Generation)
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
Dell Inspiron 2200 Windows XP
Similar Messages
-
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
Lenovo g50-70 keyboard and touchpad won't work at the same time
My Lenovo g50-70 will not allow me to use my keyboard the touchpad at the same time. If' i'm moving the mouse pointer and then try to type something at the same time the pointer will stop moving until i stop typing. I've searched the dicussion boards for a solution to this problem and I have found posts that instruct me to minimize the palm tracking portion of the driver. I now have the palm tracking set to the minimum value but it has not made a difference to my problem. does anyone have another solution?
Hi Dumptruck,
Welcome to the Forums
As per the query we understood that you are facing issue with keyboard and touchpad in your Lenovo G50-70 laptop.
Try to uninstall the touchpad driver and restart the system and reinstall the driver and check for the issue.
Click here for the touchpad driver for windows 7.
Click here for the touchpad driver for windows 8.1.
Hope this helps. Do post back if the issue persists.
Best regards,
Ashwin. S -
Partially [SOLVED] SD reader and touchpad won't work in AAO D260
Hi people, I recently bought my new netbook with the shiny W7. Funny because the first thing I did is plugin in my Arch pen drive and wipe the entire HDD. I installed Arch easily and I could make work almost all of the hardware except the SD card reader and the touchpad.
Actually, the touchpad does work but the synaptic features don't (two-finger scrolling, middle-click emulation, etc.). I've followed the instructions from the wiki but for some reason, it won't work.
The SD card reader seems to be up, but when I insert a card in it, dmesg shows me this:
usb 1-5: new high speed USB device using ehci_hcd and address 3
hub 1-0:1.0: unable to enumerate USB device on port 5
And there is no new block (sd*) apart from sda which is my HDD.
If you want to know, this is the output of lspci:
00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Ah, my Arch is 64bits but I don't think it makes any difference in these problems.
Thanks in advance!
Last edited by sironitomas (2011-01-31 01:29:45)whitethorn wrote:
I think the problem you have with the touchpad is the same one I have. I have an acer aspire one 721, the touchpad is a new alps touchpad. I haven't been able to get mine working yet. I've haven't spent much time on getting it to run.
Have a look here maybe it'll help.
https://bbs.archlinux.org/viewtopic.php?pid=250490
My touchpad doesn't get identified as an alps touchpad. It get identified as a PS/2 Generic Mouse
Currently I'm trying to figure out why hibernate and suspend aren't working. I'll follow your thread maybe someone has a clue.
It must be the same touchpad. If you want to compare, below is the output of "hwinfo --mouse"
33: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: FKGF.gRjmE_XIt35
Parent ID: pBe4.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0
SysFS BusID: 2-1:1.0
Hardware Class: mouse
Model: "KYE Optical Mouse"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x003a "Optical Mouse"
Revision: "1.00"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event10, /dev/char/13:74, /dev/input/by-id/usb-Genius_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse, /dev/char/13:33, /dev/input/by-id/usb-Genius_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v0458p003Ad0100dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (Hub)
35: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
Unique ID: AH6Q.oV6xZUCQFf1
Hardware Class: mouse
Model: "ImPS/2 Generic Wheel Mouse"
Vendor: 0x0002
Device: 0x0005 "ImPS/2 Generic Wheel Mouse"
Compatible to: int 0x0210 0x0013
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event6, /dev/char/13:70, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/char/13:32, /dev/input/by-path/platform-i8042-serio-1-mouse, /dev/char/13:63
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Could you get the SD card reader working? Here is the data from "hwinfo --redasd" as well. It seems the manufacter is MPX.
01: IDE 00.0: 10600 Disk
[Created at block.245]
Unique ID: 3OOL.uvOtdmgvZE3
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "Hitachi HTS54502"
Vendor: "Hitachi"
Device: "HTS54502"
Revision: "PB2O"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Files: /dev/sda, /dev/block/8:0, /dev/disk/by-id/ata-Hitachi_HTS545025B9A300_100604PBN2033SDWG3HT, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5450100604PBN2033SDWG3HT, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0, /dev/disk/by-id/wwn-0x5000cca5f4da9280
Device Number: block 8:0-8:15
BIOS id: 0x80
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
02: SCSI 500.0: 10600 Disk
[Created at block.245]
Unique ID: uI_Q.rzrXVB8WAiE
SysFS ID: /class/block/sdb
SysFS BusID: 5:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:0
Hardware Class: disk
Model: "MPX Memory Slot - 1"
Vendor: "MPX"
Device: "Memory Slot - 1"
Revision: "0.00"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb
Device Files: /dev/sdb, /dev/block/8:16, /dev/disk/by-id/usb-MPX_Memory_Slot_-_1_MP600-0:0, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:0
Device Number: block 8:16-8:31
BIOS id: 0x81
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
03: SCSI 500.1: 10600 Disk
[Created at block.245]
Unique ID: LUEV.6sZ8Ft89QY2
SysFS ID: /class/block/sdc
SysFS BusID: 5:0:0:1
SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host5/target5:0:0/5:0:0:1
Hardware Class: disk
Model: "MPX Memory Slot - 2"
Vendor: "MPX"
Device: "Memory Slot - 2"
Revision: "0.00"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdc
Device Files: /dev/sdc, /dev/block/8:32, /dev/disk/by-id/usb-MPX_Memory_Slot_-_2_MP600-0:1, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:1
Device Number: block 8:32-8:47
BIOS id: 0x82
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Let me know if you have some info. -
My brand new iPod touch 5th gen (silver) i use it a lot and I take really great care if it but just today it's been acting really slow, freezing up all the time, it won't let me open up apps, the notification bar (dragged down) all gone (no markets/weather/noticfications) and never says anything, and the camera. Camera is really bugging me, when you go in the app "camera" I tooka photo, and I went to the left bottom corner and clicked that preview, it shows all the photos there, but it won't let you edit them, share or delete them. But when you go into the photos app, and go to camera roll they aren't there at all.
When I try to open apps, they freeze and then I try to move/delete them and then it freezes, and stops everything. Shuts down, and restarts and like nothing's happened.
Please, this is my first iPod and I really care about this so so much. Please somebody help me with something!!!! Please!!!!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
- Reset all settings Already sugested
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Tried to install foo2zjs and now PS/2 mouse and keyboard won't work
I was trying to install the foo2zjs tarball from their website and after doing so, I lost the usage of my PS/2 mouse and keyboard in X.
The keyboard works fine outside of X, but once X starts, it can't see it. Other input devices are working fine, like my USB game controller.
I deleted all the /etc/X11 and /etc/xinited* files and removed xorg xorg-drivers and reinstalled them and no hope.
The keyboard and mouse were being detected automatically, and I never had to edit anything for them to work, so why are they not working now?
I even removed foo2zjs and disabled the CUPS daemon and still no hope.
Any idea how I can debug this any further?
Last edited by amrhassan (2011-04-26 15:42:33)Turns out it was this problem https://bbs.archlinux.org/viewtopic.php?id=117274, I must've upgraded udev while installing the printer driver.
Unplugging and replugging my keyboard made it work, but not the mouse. Maybe because it's the PS/2 thing. Anyway, downgrading the two packages solved the two issues. -
I received an error while updating my phone to ios6. Now it's frozen and I can't power down or reconnect it to show in iTunes. What do I do?
You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I´ve got a iPod touch 3G and it won´t load ios5!it says no newer uploads availebale.any answeres?
i´ve got a iPod touch 3G and it won´t load ios5!it says no newer uploads availebale.any answeres?
It sounds like you actually have a 2G iPod touch which can only go as high as iOS 4.2.1. See this article to help you identify what model and generation your iPod Touch is.
http://support.apple.com/kb/ht1353
B-rock -
HT1212 my ipod is frozen and wont do anything!!! what do i do????
my ipod is frozen and wont do anything!!!!!! i need help on restarting it. it is stuck on my lock screen
If still problem try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod is frozen and wont turn on it is stuck on the page with the apple logo and wont turn on
my ipod wont turn on i cant reset it and it wont appear on itunes when i plug it in.
Try:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Frozen and unresponsive -
My ipod has frozen and the wheel will not spin
my ipod has frozen and i cannot get the wheel to spin
Perhaps it would be a good idea to try a hard reset of the device. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If the issue still persists, you'll want to connect the iPod to iTunes and restore it to factory settings allowing it to receive a fresh new copy of its software and rebuild all of its essential databases that could have become corrupt. This will help rule out a software issue.
B-rock -
Hi all,
I recently updated my itunes/istore id. Now my ipod touch won't recongized the id for the cloud. It works fine for the rest of the ipod but my old id (email) is still on for the cloud how do I change so all is the same. BTW the passwords old and new won't work with the old id... Should I put it back in?
Any help would be great!Let me clarify if needed... the id I'm talking about is the email address...
Thanks again -
My ipod is frozen...nothing is working, is there a way to reset the unit?
My ipod is frozen...nothing is working, is there a way to reset the unit?
hold the menu button and the centre button togeher for about 10 seconds
-
I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!
Yes. You can set the payment method to "None" once you log into iTunes on your PC/Mac. I have it set up this way.
-
Updated to Yosemite, no problem. now iPhoto and iMovie won't open. Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software. User ID and PW works everywhere else.
I am having the same problem. I even changed my password and updated all of my security information. Now it just gives me an error and retry message, which of course also does not work. Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00. So I chose the option to call later, which was the exact time suck I was trying to avoid. Why wouldn't the new operating system also update the apps that were already part of my old platform?
Maybe you are looking for
-
How can I get null values for the later weeks
Hi All, When I execute this code I get the records till current week. How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code) Thanks, Vikram DECLARE v_query VARCHAR2(4000);
-
I channged my Appleid at appleid.com and now the phone stills shows my old id and will not let apps that require id/password prompts work.
-
I don't have the airplay button
I have a iPhone 4 ios 6.1.3 and for some reason I never get the airplay button. I do not have an apple tv, however I do have the reflector app, which is what i am trying to connect to. I have even once seen the airplay button on my phone. I am connec
-
Hi, we modified CO-PA data source in R/3 and replicated the changes to BW.Initially the update mode was a delta. We created a infopackage for full load and loaded the entire data.After that we performed a initial delta process by checking initialize
-
dear all i am getting ORA-01187: can not read from file 201 because it failed verification test. ORA-01110: datafile 201 : directory_path\temp01.dbf. Now i am unable to exp and imp dump and even i can see table spaces using toad. any help .... Thanks