Uploaded page does not correctly display hidden layers

Hi,
I am a bit baffled by this as I haven't seen this in all my
years using Dreamweaver.
I have created a few links, that when rolled over they
display a hidden layer that contains a styled table of contents (No
links in the tables).
This works perfectly as expected on my testing server, but
when it is uploaded to the client webserver, the hidden layers
display below each link, throwing the page out completely, and also
the CSS style does not apply.
Is there something on the clients webserver that needs to be
changed or tweeked to recognise hidden layers, CSS etc?
Cheers

Are the layers actually hidden in the code? I mean when you
look at the
code view of the page (either in the CSS or the inline styles
for the
layers, depending on what DW version you are using), do you
see -
visibility:hidden
or -
visibility:visible
Which?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Macnimation" <[email protected]> wrote in
message
news:e3q43i$1hg$[email protected]..
> Hi,
>
> I am a bit baffled by this as I haven't seen this in all
my years using
> Dreamweaver.
>
> I have created a few links, that when rolled over they
display a hidden
> layer
> that contains a styled table of contents (No links in
the tables).
>
> This works perfectly as expected on my testing server,
but when it is
> uploaded
> to the client webserver, the hidden layers display below
each link,
> throwing
> the page out completely, and also the CSS style does not
apply.
>
> Is there something on the clients webserver that needs
to be changed or
> tweeked to recognise hidden layers, CSS etc?
>
> Cheers
>

Similar Messages

FireFox home page does not always display correctly, hence I cannot do anything

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

In uploading changes complete uploaded page does not upload

In uploading a page via Firefox part of the page is missing

Are the layers actually hidden in the code? I mean when you
look at the
code view of the page (either in the CSS or the inline styles
for the
layers, depending on what DW version you are using), do you
see -
visibility:hidden
or -
visibility:visible
Which?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Macnimation" <[email protected]> wrote in
message
news:e3q43i$1hg$[email protected]..
> Hi,
>
> I am a bit baffled by this as I haven't seen this in all
my years using
> Dreamweaver.
>
> I have created a few links, that when rolled over they
display a hidden
> layer
> that contains a styled table of contents (No links in
the tables).
>
> This works perfectly as expected on my testing server,
but when it is
> uploaded
> to the client webserver, the hidden layers display below
each link,
> throwing
> the page out completely, and also the CSS style does not
apply.
>
> Is there something on the clients webserver that needs
to be changed or
> tweeked to recognise hidden layers, CSS etc?
>
> Cheers
>

IWeb pages Do Not Correctly Display In W3C's Browser/Editor - Amaya 9.54

Earlier I posted that lastest version of Firefox would not display iWeb pages correctly. However, iWeb pages have never displayed correctly in the W3C's browser/editor Amaya. I just tried the Amaya upgrade (9.54) and the iWeb pages still don't display correctly NOR do any of my links work!? Everything displays correctly in Safari (and now Firefox?!)
Here's my iWeb page:
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
To download and check with Amaya:
http://www.w3.org/Amaya/

The issue isn't whether or not users use Amaya for web browsing - the issue is: does iWeb produce valid HTML and CSS!
Since Amaya is produced by the W3C - who establishes the standards for valid HTML and CSS (yes/no?) - anyone using iWeb to produce content - expects iWeb to produce valid pages. Or is there a problem with Amaya?
Here's how to check for valid HTML and CSS. Just paste my URL (or your own iWeb page URLs):
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
into: http://validator.w3.org/
and http://jigsaw.w3.org/css-validator/
You will likely be surprised with the results.
G4/500 Mac OS X (10.4.9)

Messages App (OS 10.8.4) Does Not Correctly Display the Read Count.

For a while now, the messages app in Mountain Lion does not mark an iMessage as being "read." If I read an iMessage on my iPhone, then it will update the read count in the messages app on my MacBook Pro to show it has been read. If I read an iMessage on my MacBook Pro, the blue dot stays and the read count remains unchanged. Can someone point me in the right direction on getting the read count to work again?
Thanks!

The read count is also at the top of the window:
Not to mention the blue dots that don't go away:
And yes, the "read" count is updated between devices. This always worked for me until 10.8.2 was released and it broke on my main system. I have another computer and it continues to work. I read an iMessage on that computer, the blue dots go away from my iPhone and no iMessages show up on the lock screen. For some reason my main computer doesn't function this way anymore.

Firefox 3.6.8 does not correctly display inuktitut text in an input field. Any solution?

Firefox 3.6.8 seems to have an issue with Unicode in input fields, e.g.
The following code
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
should look more or less the same as
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
The first one uses a Unicode font (available at http://www.gov.nu.ca/english/font/) the second one one of the traditional non-unicode fonts.
The two squares in the first string are not really squares. When you copy and paste the string onto a system with a unicode font containing canadian syllabic characters, then the squares are displayed correctly.
Additional information: I just found that this is not related to input fields, as I thought in the beginning, but also happens within normal Ps or DIVs.
Strangely enough, the following complete HTML seems to work when saving as a local file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="iu-ca" lang="iu-ca">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<style>body{font-family:Arial,Pigiarniq;}</style>
</head>
<body>
<p>ᕿᓂᕐᓂᖅ</p>
<div>ᕿᓂᕐᓂᖅ</div>
<p>a real unicode font:</p>
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
<p>a non-unicode font:</p>
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
</body>
</html>
and opend within this same browser session in another tab.
In my current browser session, I see two different renditions of the string:
- on this support form submission page, the string is incorrectly displayed (with two squares) as on the webpage which is currently under development
- in another tab, the above mentioned HTML file displays all instances of the string correctly.

(A) is what I see on this webpage (Firefox support form submission page)
(B) is what I see within the same browser instance in another tab, viewing the above HMTL code
(C) is what happens on the webpage under development.
A and C show the same strange behaviour.
Opera, Safari on Windows and IE display it correctly.
Thanks for any hints,

In the English environment does not correctly display the Chinese

I design query in the English environment to input Chinese characters. It can be run correct in the excel, but in the web page or portal display incorrect.
My environment of language is English, but I want to display Chinese in the portal.
How can I do ?
Any suggestion!
Thanks.

Hi ,
I am facing one issue in WAD ,Could please help me out
I am developing my reports in language English
In WAD 3.x when we execute the report in the URL we can see language =EN, (https://inls51556188a:6001/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=ZLUMM_Q100_TPL01)so even when the user browser settings are in German still the report gets displayed in English where as when the user login in German and execute the report in WAD 7.0 it displaying the techical names for text data and infoobjects names as there is no text data maintained in German.
Is there a way to fix the language in the iView of the WebTemplates directly in the Portal.If so how can this be done?
Thanks,
Sany

Monitor does not correctly display after waking up from suspend

Hello,
Awesome WM. I use systemctl suspend to put my computer to sleep. It works fine, however, when I press the power button on my system unit, the computer wakes up but the image is distorted completely so I cannot see what is where... Quiting Awesome WM (win + shift + q, if I remember correctly) and logging back helps, but is not really convenient. I have tried to find a solution for the problem and, as you most likely surmised, with no success.

http://en.wikipedia.org/wiki/Compositin … w_managers
https://wiki.archlinux.org/index.php/Co … #Composite
Have you checked your logs for what is happening after waking up?
Last edited by emeres (2013-10-13 19:35:50)

Page does not display properly in 3.0.4

If someone from apple reads these postings, the following page does not display properly in Safari 3.0.4 with mac os leopard.
I can not find an email to email directly to you.
http://bigten.cstv.com/sports/m-wrestl/spec-rel/021308aab.html

Hi
Welcome to Apple Discussions
Best way to reach Apple is to send a Bug Report via the Safari Menu>Report Bugs to Apple. While Apple doesn't respond directly to these notes, the information gets in the hands of Software Engineers at Cupertino.
Specific to the referenced site, there are multiple code errors, which would contribute to the rendering problem. Safari is a lot more specific about following correct code than other browsers. I suggest passing the Validation report on to the site developers. Good code practices (W3) makes for better uniformity and security on the Internet.

Page does NOT load correctly in FIREFOX

My HOME page does not RELOAD correctly in FIREFOX when when
the link is clicked on from another page in my little "2 page"
site.
BUT if I click on the BACK button it loads CORRECTLY
It works correctly in IE
Here is the Home page:
http://www.quicksubmitbrokerswholesale.com/
Here is page 2 where clicking on the link in FIREFOX loads
incorrectly:
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
What do I need to TWEAK to make it work OK in FIREFOX?
Thanks in advance

Here is the crux of all your problems:
<!-- Fireworks 4.0 Dreamweaver 4.0 target.
You built the site in Fireworks, and a very old version at
that, and then
imported the site into DW. Graphics apps like Fireworks and
Photoshop
produce bloated, convoluted code and fragile structures. If
you want a
worthwhile site you will have to start over. Create only your
graphics in FW
and build the entire site in DW. Be cautioned though such an
old version of
DW won't produce a site consistent with today's standards.
You really should
upgrade if you want to deliver value to your client.
Walt
"electro-dud" <[email protected]> wrote in
message
news:gb2k07$9v4$[email protected]..
> My HOME page does not RELOAD correctly in FIREFOX when
when the link is
> clicked
> on from another page in my little "2 page" site.
> BUT if I click on the BACK button it loads CORRECTLY
>
> It works correctly in IE
>
> Here is the Home page:
>
http://www.quicksubmitbrokerswholesale.com/
>
> Here is page 2 where clicking on the link in FIREFOX
loads incorrectly:
>
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
>
> What do I need to TWEAK to make it work OK in FIREFOX?
>
> Thanks in advance
>
>

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

Tools > Options > Tabs - is the last preference there check-marked??

Page does not navigate: form re-displays

In my project there is a page which consists of 5 radio buttons and a "Submit" button at the last of the page.
User selects a radio and on press Submit it navigates to a different page.
Instead when i select a radio button and press Submit "Validation error:Value is not valid" is displayed on top of the page and page does not navigate.
JSP code:
<h:selectOneRadio
                              styleClass="selectOneRadio" id="radio1"
                                                                 value="#{SL.objectSpace.sPId}"
                                                                 onclick="return sL_radio1_onclick(this, event);">
                                                            <f:selectItem itemValue="#{varBObjs.pId}"
                                                                      itemLabel=" " />
                                                       </h:selectOneRadio>
<hx:commandExButton type="submit" value="#{labels.button_CS}"
                                        styleClass="commandExButton" id="button_CS"
                                        action="#{SL.objectSpace.cS}"></hx:commandExButton>JS snippet:
function sL_radio1_onclick(thisObj, thisEvent) {
     var parentRadioButtonName = thisObj.name;
     var p1=thisObj.value;
     var indexStart = eval("form1:table1:".length);
     var indexEnd = parentRadioButtonName.indexOf(':radio1');
     var parentIndex = parentRadioButtonName.substring(indexStart,indexEnd);
     if (!thisObj.checked){
          //parent unchecked, uncheck all children for this parent
          for(i=0;1==1;i++){
              childRadioButtonName = 'form1:table1:'+parentIndex+':table2:'+i+':radio2';
              if(thisObj.form.elements[childRadioButtonName]){
                  thisObj.form.elements[childRadioButtonName].checked=false;
             } else {
                    break;
     } else {
          //parent checked, uncheck other parent
          for(i=0;1==1;i++){
              parentRadioButtonName = 'form1:table1:'+i+':radio1';
               if (thisObj.form.elements[parentRadioButtonName]) {
                 if(thisObj.form.elements[parentRadioButtonName].checked && (i != parentIndex)){
                      thisObj.form.elements[parentRadioButtonName].checked=false;
                         //uncheck children of this parent
                      for(j=0;1==1;j++){
                           childRadioButtonName = 'form1:table1:'+i+':table2:'+j+':radio2';
                             if(thisObj.form.elements[childRadioButtonName]){
                                  thisObj.form.elements[childRadioButtonName].checked=false;
                             } else {
                                        break;
                } else {
                    if (i>parentIndex) {
                         break;
}SL.java code:
protected String sPId="same";
|
|
public String getSPId() {
          return sPId;
          public void setSPId(String sPId) {
          this.sPId = sPId;
     }Thanks in advance.

In addition my IDE throws the below error:
(jsf E com.sun.faces.context.FacesContextImpl addMessage Adding Message[source Id = form1:table1 0:radio1,summary=Validtion Error:Value is not valid)

JSP error page does not displayed on its own, includes in the original JSP

Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.

Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Accounts Setting page at Facebook is not correctly displayed

Facebook accounts settings not correctly displayed. My OS is Windows XP & Internet security is Kaspersky

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Uploaded page does not correctly display hidden layers

Similar Messages

Maybe you are looking for