Uploaded the latest Itunes to my Windows 8 now unable to find my Ipod or Sinc
Updating Itunes to my Windows 8 I nolonger see my Ipod or Nano in Itunes or my computer USB port. I cannot find earlier versions of Itunes to change back to and reloading itunes does not fix the problem.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Similar Messages
-
Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.
Now, iTunes won't launch and can't be updated. Please help.
If I have lost my music collection I will be switching platforms ASAP. It is insane that Apple has updates seemingly every day for their products.I was in your same situation with 14 downloads and 14 attempts.
You have to make sure that your Mac is booting into 64 bit mode. You can make sure of this by going into System Preferences and scrolling down to 'Software' and making sure that you are booding with 64 bit Kexts.
If not, restart while holding the 6 and 4 keys down until you see the spinning gear wheel and try installng again.
BUT, what I also did was to go into Applications, click on the Lion installer, Get Info, and give yourself custom priviliges to Read And Write.
I did this simultaneously, and I don't know what function did it, but it worked for me, with no further downloads of the installer.
Good luck! -
I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro
Try the Boot Camp Assistant when you are in OS X and download those and follow the directions in BCA utility.
Then look up the Boot Camp forum. I suspect you thought this was MBP related forum, it is for 65 lb tower model (and well the new "nMP Late 2013 Mac Pro" http://www.apple.com/support/macpro/
Boot Camp
There is a support page too
http://www.apple.com/support/bootcamp -
I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly." I can't open itunes at all. Is there anything I can do or is there a problem with the new update?
Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there. -
Ipod crashed. Unable to download the latest itunes on my vista. Kept have errors message. Now unable to sync my iPod after iPod been restored.
Is it due to the latest version of IOS and window incompatibility? Frustrated!!!See:
Trouble installing iTunes or QuickTime for Windows
Have you tried:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have the latest itunes version on windows 8.1 and it's stuck on stage 2 of 8
Hi. I have latest version of itunes and have uninstalled and reinstalled twice but it keeps getting stuck at stage 2 of back up.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You need to use the 64-bit installer for 64-bit Windows, but the main iTunes application is 32-bit.
tt2 -
eversince i tried to upgrade my electric turned off and something got lost from my origional itunes now i cant uninstall or reinstall and keep getting the message QTCF_CFHTTPmessagesetheaderfieldvalue could not be located in the dynamic link library QTCF,dll. its driving me nuts can anyone help PLEASE
Many thanks.
Origionally i was receiving that some msi or nsi was missing and to insert my itunes disc which ive never had i tried to uninstall and kept on getting could not uninstall due to the folder not being found
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Okay, so I got the latest update and apparently it doesn't work. I had an icon on my desktop that wouldn't open because the 'newer Itunes' is apparently corrupt or something. Going into my applications, I found another Itunes icon and it opens up, but not the F7, F8 and F9 keys aren't working with it. I've already tried installing the latest version and that hasn't helped. Does anyone know how to fix this problem?
Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M. -
I got an HP computer with Windows 8 already loaded on it. I have tried unsuccessfully for months to put itunes on this computer. I try and then give up. All I am able to get is a non-responsive program. Just a white screen with a blue spinning circle. I have tried several suggestions - run in administrator mode, try changing the compatibility, but am lost and frustrated. I am not very technologically savvy, so please help!
Hello cnitz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
Best of luck,
Mario -
I am trying to update my iTunes and it keeps saying that I need to verify my authority to have mobile services or something like that. What can I do??
Hello Mettiuss,
Thank you for using Apple Support Communities
It sounds like you are unable to uninstall iTunes so you can install a new updated copy, and if so, I recommend taking a look at this article named Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 found here http://support.apple.com/kb/HT1923
Take care,
Sterling -
What must I do to install the latest Itunes program using windows 7, 64. The program stops when the service portion is installing and states, "Service Apple mobile division fails to start"
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
I've selected my iPhone from the device list. I've started iTunes but I'm not seeing the Info tab as shown in this knowledge article. What program has the Info tab?
I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.
-
Why doesn't the latest itunes recognize my ipod?
I downloaded the latest iTunes but it doesn't recognize my 4th generation classic ipod.
Hello gail6068,
Thanks for using Apple Support Communities.
First please try the troubleshooting steps in the article below:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
If the issue persists, then follow the steps in the following support article.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Take care,
Alex H. -
I updated itunes now it wont find my ipod
so my iTunes was working fine and then I did this new update on iTunes to my windows and now it wont find my iPhone or my ipod nano when I plug them in it says detected but I have to uninstall and install iTunes which I have twice already and it still wont find or sync with any of them idk what to do anymore help!
Hello AG650,
That is a bummer, lets see if we can get your devices to show back up in iTunes. Take a look at the article below to continue your troubleshooting, it will have you check the drivers on your computer for a proper installation as well as checking any third party software conflicts.
iPhone, iPad, or iPod not recognized in iTunes for Windows
http://support.apple.com/en-us/HT204095
Regards,
-Norm G. -
I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?
Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.
Maybe you are looking for
-
Keeping the connection open while in sleep
I was just wondering if there is anyway to keep the internet connection open while the computer is in sleep mode? I have looked around for a little bit but I figured someone else probably already has an answer. Just to clarify I don't mean closing th
-
Authorization control to GSBER for FBL1N, FBL3N and FBL5N transactions
I have tried to take control of the authorizations to these reports through F_BKPF_GSB object, but I assign it to a user with authorizations to one GSBER and when I execute the reports the user is still able to see all the GSBER. How can I limit for
-
Sccm 2012 multiple language reports from mbam integration
I installed mbam on my sccm 2012 primary server and all went well with one exception. The reports have multiple languages. In the reports folder that houses the mbam reports, there are multiple folders for the four mbam reports, so I have about 10
-
2.0.1 Back Up Time Still Really slow!
Hi Peeps, 2.0.1 update went on cleanly with no problems at all. On the whole seems to be a good update - back up times are still really painfully slow and seem to be linked directly to how many apps you have installed. I removed them all and the back
-
I used a 3 photo page layout with a caption but only want one photo to print. I placed the photo and left the other spaces blank. Will the page print white where I didn't place the photos, or with gray boxes as shown on the layout? I don't a full pag