Uploadind consumption data to material master
Hi Gurus,
Is there a program to load previous consumption data for a material into the material master as part of data migration, so that it could be used later for forecasting etc.
Thanks,
M2202
Hello,
Refer the OSS Note: 200547.
Clear instructions on how to use the OSS Note and the report MVER_DI is given in this..
Regards,
Siva
Similar Messages
-
Classification data in Material master
Hi
Is there any FM to read classification data in material master from buffer. I know there is a FM CLAF_CLASSIFICATION_OF_OBJECTS to read, but this reads from database tables. I want to know the FM, which would read this from buffer.
Thanks
KarthikHi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
wa_taxclassifications-depcountry = wa_stax-aland.
wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
wa_taxclassifications-tax_ind = wa_stax-taxim.
APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = wa_headdata
TABLES
taxclassifications = it_taxclassifications
returnmessages = it_return[]. -
Updation of Consumption values in material master
Dear Experts,
For a FERT ,
When I use strategy 40 , Consumption values ( PGI - Deliveries )are getting updated in MM02 in Forecast view.
whereas,
When I use strategy 50 , Consumption values are not getting updated in MM02 in Forecast view.
Is there any setting to control this updation of Consumption values in Material Master ?
Regards,
SheikHi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
Uploading TAX Classification data in material master
Hi,
I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
But bapi is uploading tax classification only for country DE.
When I am creating through MM02 its getting updated.
Can anybody tell me what is the problem ?Hi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
wa_taxclassifications-depcountry = wa_stax-aland.
wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
wa_taxclassifications-tax_ind = wa_stax-taxim.
APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = wa_headdata
TABLES
taxclassifications = it_taxclassifications
returnmessages = it_return[]. -
Update scheduling data in material master
Hi,
How to update scheduling data from Process order to master recipe in mass. As I can schedule recipe in C202 and update the sceduled data in material master by CA96 & CA97 transactions. But i wants to schedule master recipe in mass. Is there any way to mass update it ?
Regards
AmitHello
I have tested in my internal test systems and system correctly updated the material master using CA97, without aky kind of previous scheduling of the master recipe.
Can you please provide a more detailed description of the issue? What is happening if you try to run CA97 without running the scheduling of the mater recipe? How are you running CA97?
You may also try CA97N, which is a newer version of CA97.
BR
Caetano -
Palletization data in material master??
Hi All,
I have maintained the palletization data in material master as given below
LE quantity Un SUT
2500 pc E1
200 pc L4
100 pc L3
Now when I have 201 pcs and above system picks SUT E1 and when I have 101 pcs and above system picks SUT L4. This is working fine.
But when I have 100 pcs and less the system does not pick SUT L3 as required. It still picks L4.
Is this standard or are we missing something here?
Regards,
V SHi,
Please check in IMG if the storage unit type L3 is definited in the Storage Type under Strategies-->Activate Storage Bin Type Search.
Also you can use the User Exit MWMTO007 "Palletization and storage type search for stock placement" to define your palletization data.
Regards -
Costing error while change mrp data in material master
Hi dears,
This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
system not allow to change and show the error as
Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
i need to change the mrp data in mm02 and i donot want to do delete the pcc .
any process to carryover
thanks
Edited by: raj on May 24, 2010 12:22 PMHi,
MRP is mainly configured for a material so that tere would not be any need for manual checking of the stock so as to create a PR.
The parameters which you have specified for a particular material like reorder point and lot size will help in planning for a particular material.
If you need only Qty of two (Less) then there s no need of configuring a MRP for that material
And lot size is also decided basing on certain other factors like
1) Lead time
2) Transportation costs involved in procuring the material etc
So ifyou want to generate PR for a qty of 100 then you need ot change the lot size
I hope this gives you clarity
Thanks & Regards
Pavan -
Re: Populating Additional data in Material master record
Hi,
I am creating material master record using BAPI_MATERIAL_SAVE_DATA. I am using the below function modules to populate date in Additional Data Tab. I am getting the existing material details from BAPI_MATERIAL_GET_ALL and passing it to
BAPI_MATERIAL_SAVE_DATA variables. I can create material successfully, but "PROPORTION/PRODUCT UNIT" TAB in Additional Data Tab is not populating.
Program populates this data for some materials and for some materials not. For example, when I try to create a new material by copying existing details from 1234 , New material will be created with 12345(say), but "PROPORTION/PRODUCT UNIT" TAB in Additional Data Tab is not populating.
Now If I put a break point, to find out what could be the issue , and then press f6 , and re-execute program for the same material 1234, then my custom program can populates data. I know its sound wiered, but I am not able to solve the issue.
CALL FUNCTION 'VBWS_UOM_READ_WITH_MATNR'
EXPORTING
i_matnr = it_mara-matnr
TABLES
e_meinh = gt_meinh
e_meinh_ws = gt_meinh_ws
e_meinh_ws_upd = gt_meinh_ws_upd
e_meinh_ws_updx = gt_meinh_ws_updx
e_message = gt_message
e_return = gt_return
EXCEPTIONS
error = 1
OTHERS = 2.
FREE: gt_message, gt_return.
CLEAR : gt_meinh_ws_upd, gt_meinh_ws_updx.
CALL FUNCTION 'VBWS_UOM_MAINTAIN_DARK'
EXPORTING
i_matnr = lv_matnr
i_kzwsm = it_mara-kzwsm
i_kzwsmx = 'X'
i_exit_by_first_error = 'X'
i_user = sy-uname
i_buffer_refresh = 'X'
i_no_update = ' '
TABLES
i_meinh_ws_upd = gt_meinh_ws_upd[]
i_meinh_ws_updx = gt_meinh_ws_updx[]
e_message = gt_message
e_return = gt_return
EXCEPTIONS
error = 1
OTHERS = 2.
LOOP AT gt_return WHERE type = 'S'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDLOOP.
Any suggestions ...Hi Karthik,
Thanks for your reply. It worked. But now I am facing strange issue. As you see my code above, i am using VBWS_UOM_MAINTAIN_DARK to update Addition data tab. however, the values of internaltable gt_meinh_ws_upd was not updated correctly inside the material master.
For example, I am filling gt_meinh_ws_upd table with the below values
gt_meinh_ws_upd-wsm = 'OZT'
gt_meinh_ws_upd-atnam ' ZABCDE'
gt_meinh_ws_upd-atwrt = 0.0023
append gt_meinh_ws_upd.
but when i see in material master, gt_meinh_ws_upd-atwrt = 0.0023 is updated with 23, instead of 0.023. I debugged th func. module many times, I didnot come acroos the code what making it to 23.
Any Idea karthik...
Thanks in Advance -
Default values set for Tax data in material master
Hi
Can anyone tell me how to set default values for TAx dat in sales view while creating material master.
so that it automatically take values while creating material master.
Regards
Vijay ShuklaMary and Vijay,
I probably understood your question wrong.
I was somehow assuming you were referring to classification data.. Sorry abt that.
The tax data gets populated automatically while creating the material master.
Th key lies in configuration.. You would have to use Tcodes OVK1, OVK4 to define the material and the tax categories by country
The tax data is populated by the assignment that you make in OVX6.. I believe.. assigning plants t Sales org. Th country code defined in the plant OX10 is used to determine the tax data and once you customize this part.. You should start seeing the tax data populate when you use that sales org while creating MM
Hope this answers your query.
Edited by: Pavan Kumar on May 2, 2008 8:10 AM -
Excise data in material master (India)
We are upgrading from 4.6C to ECC6.0
I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
"Record 21 MORE does not exist in table T133E
Message no. M3748"
and
"Record 21 J1PR does not exist in table T133E
Message no. M3748"
What is wrong ? How to go about it ?Hello ,
Yes this is absolutely possible .
Excise data is maintained at plant level , hence the foreign trade import view will be maintained only at the "Indian plant " level .
Secondly , The valuation level in your case shud be plant. This will take care of all the valuations .
Regards
Anis -
Hi
The CIN data in the Foreign trade views of the Material Master is not coming. I ve done Assign Users to Material Master Screen Sequence for Excise D . Screen sequence IN is assigned, but not showing in material master..pls tell
regards
B sharHi
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
1. Go to IMG  Logistics General  Material Master  Configuring the Material master  Define Structure of Data Screen for each Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subcreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Hope this will help you
reward if it helps
rb -
Table name of Classification Data in Material Master
Hi Experts,
Greetings to all...
I wish to ask one question.
I wanted to upload the initial data in material. in initial data I wanted to maintain the classification data for the batch management. Please tell me what is the name of table/field where the material and classification data is stored. I couldnt find anything in the table KLAH, AUSP, CABN, CAWN.
Thanking you in advance,
Regards,
UK.Dear UK,
If you using ALE:
Follow following sequence:
CHRMAS Characteristics that contain global and local object dependencies
KNOMAS (global object dependencies)
CHRMAS Characteristics that contain global and local object dependencies
CLSMAS Classes with characteristics and their overwritings, including object dependencies
The characteristics and characteristic values must be transferred second time
to create the assignment of the global object dependencies to the characteristics
and characteristic values.
BR,
ian Wong -
Reg: Consumption Mode in Material Master.
Hi,
I am using Function Module u2018BAPI_PRDSRVAPS_GETLIST2u2019 to fetch the Material details from the Product Master, I am able to fetch all the details but Consumption Mode which is located in the Demand profile tab is not getting fetched even though value is present in the Product Master.
Thanks in Advance
VikramHi,
Have no suggestion to make the BAPI return consumption related values. Too many structures in the BAPI to explore
But if it returns RQMID you can pass it through table /SAPAPO/MATRQ and read the consumption relavent parameters.
Regards,
Ashok -
How to implement the Tax Data for Material Master IN MDM
Hello Experts,
The MDM 7.1 standard business content does not ship the content required for TAX data implementation. We need to include this however for Material/Vendor/Customer.
We have alraedy tried the approach of a multivalued lookup table for TAX fileds (Plant,Country,Tax Type, Tax Category, Tax Classfn) and linked it to the Sales DAta Qualified Table.
but this does not satisfy the interdependencies of SAP ERP i.e Sales Org-> Distribution Channel-> Plant-> Departure Country-> Tax Type-> Tax classification. We intend to implement this same relation in MDM.
Kindly guide as to what would be the right approach. Can a qulalified lookup for Tax data be helpful for this scenario?
Also can anyone secify the correct table or T-Code where we can find this entire dependency in ECC?
Thanks in advance,
Elizabeth.Hi Elizabeth, hi Shiv,
as long as you're using MDM for consolidation and harmonization only, you could add the tax information. As for customers (for example), you maintain tax indicators as a child of the sales area. This means for MDM that you need to include the tax indicators in the sales data tuple. As tax indicators are repeatable records, you need to create a nested tuple for that.
But as Shiv has correctly mentioned, the tax information itself is quite complex in regards to which tax information must be maintained depending on e.g. the country and/or sales area. In MDM it is hardly possible to predefine any mandatory values like it is possible in ERP. So if you plan a central creation of data, you'll most probably have to invest a lot into the correct validations to ensure that you create correct data. Still it needs to be closely investigated if you can do this with the MDM functionality or if you need some external API programming to do the job.
Best regards
Michael -
Consumption data material master
hi can any one tell how to upload consumption data in material master using BAPI or any other method..
regards,
deepthiHi Deepthi,
Please check this FM <b>MB_UPDATE_MATERIAL_CONSUMPTION</b> perhaps it may help.
Regards,
Ferry Lianto
Maybe you are looking for
-
Hi,all I'm using ISW to synchronize the users from AD to DS, the version of ISW is 04Q3 SP1(my DS version is 5.2p4). And I found this problem: One user, it's password in DS is "pwd1", and it's pwssword in AD is "pwd1" too, so the user was synchronize
-
Folder Sharing for CC Teams - Is this ever going to happen?
I have now been using CC for Teams without an advertised function since early June this year. I keep seeing posts in these forums that the service is 'coming soon' but it is very frustrating and very difficult to plan and organise schedules not knowi
-
I opened a .psd file (300 ppi, CMYK, .jpgs (1626px x 2130px), I saved it as a jpg (None, 12, base "standard", preview checked). I then closed the original .psd file. I repeated those steps on the same file and saved a series of 6 .jpgs. Of those 6 fi
-
Email Billing document as PDF Attachment while saving from VF01/02
Hi, Can anybody suggest if there is any BADI/User Exit/Configuration exists in order to email Billing document as a PDF attachment while saving from VF01 or VF02? We need to trigger this while saving the Output type say, VF02 GOTO -> HEADER -> OUTPUT
-
OpenGL isn't updating- already at version Mac OS X 10.5.8
Right now I have version 1.2 of OpenGL, but I need at least version 1.3 to access the application DAZ Studio (an application that I want to use). I am already in version 10.5.8, after just recently updating my software- but my OpenGL STILL remains at