Uploading a book for a client author

I created an ibook on behalf a client and we need to post it to the Apple bookstore. My question is related to the vendor ID: Will this book's metadata show that I'm the seller because I uploaded the file? Is there a way to show my client as the seller? They do not have macs or the expertise (or time) necessary to publish it themselves, so they asked me to upload the file, but I'm concerned about the vendor ID issue.

"Macs for dummies" was good, if it still exists. I bought it years ago when I bought my first Mac, and it put a smile on my face, like this:
It's fun to read, with witty remarks such as
"the forest of cables sprouting from the back of your PC can look like Medusa on a bad hair day"
To get a taste of it, see this website:
http://www.dummies.com/WileyCDA/DummiesTitle/Macs-For-Dummies-9th-Edition.produc tCd-0470048492,subcat-OS.html

Similar Messages

I would like to upload a file for a client and have it expire (lock them out of it) at a prescribed time

I would like to upload a file for a client and have it expire (lock them out of it) at a prescribed time, say, 2 days after delivery. Any way to put a time limit on a file?

No.
Mylenium

Interactive coloring book for a client's website.

Hi An! I need to create an interactive coloring book for a client's website. I used Muse to build the site; now I need a good tutorial on how to create a coloring "book" (pages, really) that they (children) can color on the site. Any suggestions??? Thanks.

Have you ever worked with WordPress? There are WP plugins (commercial and free) that might do what you need.
WordPress › Profile Builder - front-end user registration, login and edit profile « WordPress Plugins
http://www.cozmoslabs.com/wordpress-profile-builder/
Nancy O.

IPhoto - uploading photo books for printing

iPhoto crashes when trying to upload a Photobook for printing...driving me mad!
any ideas follks.
The Photobook assembles, but wont upload.
Thanks in advance..

This was an excellent suggestion previewing the book at
http://support.apple.com/kb/HT1040 -
and then booting up the computer in safe mode. When I did this I found that several of the fonts had changed and would have ruined the book as they were too big or small or didn't fit the text boxes. I repeated this process until I was satisfied. The pdfs were fine.
Best of all the book was printed exactly as I laid it out.
Apple's turnaround was amazing: just over a week! Really good for getting a book to a small West Coast island in Canada.
Even though Apple's book production is very good it is limited in layouts for each style. BLURB offers a bigger range of layout options as well as a choice of printing papers which is a nice touch. I didn't use them this time because some posters had had delays in getting their books and I had to meet an birthday deadline.
Kudos to Apple for making the book in such a short time.

Belgium - impossible to upload a book for printing the task never ends

Hello, i want to order a book (75 pages) and i can't upload it on the printer server.
I have restarted my modem, mac pro...
I have let the upload process on for over 2 days and the task is always at 0%.
My internet connection is fully functional i can upload trough ftp software.
Is there any other print service(in europe) that provide same book model than the ones from apple?

I haven't ordered one recently but I have ordered several books over time from Belgium. All have worked perfectly. Being based in Luxembourg we are pushed onto Belgium which then does not recognise the existence of Luxembourg. Nevertheless, we get around it. I am told that the Belgian operation actually works through Netherlands. My preference would be Germany or UK next time I do this, if I can make them work.

What's the best way to upload a site for a client?

I am creating a website for my 1st client and I am wondering what the best method to uploading it for their viewing is. The site is not ready to be fully uploaded so I can't load it to the url. How else can you send it somewhere for the client to view? Any help would be greatly apprecaited!
Thanks,
Dre

function(){return A.apply(null,[this].concat($A(arguments)))}
The site is not ready to be fully uploaded so I can't load it to the url.
You can if you password protect the root directory or use a robots noindex Meta tag.
This was discussed here recently:
http://forums.adobe.com/thread/577709?tstart=180

Upload multiple books for content providers to iBook store

Is there a way for content providers to upload multiple books through iTunes Producer to the iBookstore at once? In the iTunes Producer document: UsingiTunesProducer2.8_Books.pdf I read this one page 14.
When creating a book package from a file, be sure to use the iTunes Producer template. To get a copy of the template, choose File > Open Book File Import Template in iTunes Producer 2.8. iTunes Producer creates the BookFileImportTemplates folder containing the BookFileImportTemplate.txt template. To always have an original version of the template file, be sure to make a copy of the template before editing.
This seem to indicate the template is only for one book.

Open that Templates file with a spreadsheet program like Numbers or Excel... and read the following thread:
https://discussions.apple.com///thread/3588675?start=0&tstart=0
What's not clear to me is how to upload ASSETS in bulk. It looks like iTunes Producer generates pop up screens for each book in the metadata spreadsheet and while the metadata is filled in, the assets like eBook file and Cover image along with screenshots are empty... asking for you to choose the files.
Anybody know how to upload multiple books, not just metadata... we've figured that out... but multiple books (the files and the assets associated with those books), to the iBookstore... via iTunes Producer?
Thanks.

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

Enhanced book for iPad, built on iBooks Author

Hi all
I am sorry if these are similar questions to ones asked before, but I wondered if things might be different since they were last asked.
I have delivered an enhanced book built for iPad and it is currently in the review status, not in 51 stores. My questions (of which I have heard many myths about):
1) As it's an enhanced book (created on iBooks Author), there are lots of videos, galleries etc which make the publication about 1 gig. I have heard that although there is a 2 gig limit, some authors have had responses from Apple saying that it should be kept to max 200mb and therefore rejected. True or false do you reckon?
2) Mine is a travel guide about a specific area of Spain and it is all about solutions to the traveller. Therefore as well as lots of text, there is a Useful Links section that links to companies websites such as car hire - their logos are next to the URL's in my book. Do you think Apple will be ok with their logos visible and external web links? It is simple to remove it if necessary but in truth it is a resource for my readers.
3) I have heard varying reports of 3 hours to 55 days for the review process to be complete. Does anybody know if it is longer for an enhanced book due to the complexitied of its build?
4) I have heard reports that if it fails, Apple will tell you how to rectify it. Is this true and is it easy to resubmit?
5) I have also heard reports of Apple simply rejecting without explanation. That would be so painful. I have spent 6 months and a lot of investment. I would be devestated. is this true?
6) Any other advice? It has been in review for 3 days only so far. Any ideas on current wait time for enhanced books built for ipad, created on iBooks Author?
It's an anxious time isn't it?!
Thanks.

1. Max size is 3 GB, but take into acount you want updates at some stage and need to allow "space"
2. URLs are usually excepted IF they are not competitors of Apple iBooks Store - ie Amazon. Any logo is usually copyrighted by the company. Any potential copyright infringements could be rejected by th review team.
3. Time taken in Review depends how busy they are without regard to your content.
4. If your book fails the review, you will be issued a ticket - A recent email advised changed to the ticketing procedures.
Ticket Catalog Report
The Catalog Reports module on iTunes Connect now contains a Ticket Catalog Report. The report contains details for all tickets that have been assigned to your iTunes Connect account.
iBooks Store Formatting Guidelines Update
The iBooks Store Formatting Guidelines include important information to help you avoid common errors when publishing on the iBooks Store. The new version of the guidelines includes updated information for copyrighted terms, supported languages, series metadata, What's New descriptions, book assets files, and more.
Download the updated iBooks Store Formatting Guidelines from the Deliver Your Content module on iTunes Connect.
5. The review team will pass or fail your book, fail is dealt with above. Pass... means its in the store. All you need to do is keep checking status in iTC.
6. is the same asnwer as 3. You wait and Check in iTC to monitor if your book is passed or ticketed.
Other advice, open iTC > Deliver your Content > on the top right are a number of PDF, download and read study them. Below them is a video.. take time to view the video and take notes.
The above extracts are from an email from iBooks, the links should still work, if not they are basically to open your iTunes Connect - Deliver your content section.
Last bit of advice, check everything at least twice before uploading to the store. Remember issues with copyright. Dont use anything just because its online. Dont copy text or images from other websites and give credits/links to any that are subject to Common Licence conditions... and finally.. be patient, time , tide and Apple move at their own speed.

Problems uploading Publication Preview for my book in iTunes Producer

I created a book in iBooks Author (very easy), and uploaded it using iTunes Producer. However, I didn't realize I needed to create a separate sample book/publication preview. Now, when I look at my book in iTunes Connect, it says, "No publication preview uploaded. You must upload a publication preview before it can appear on the store." However, I can't find any way to upload my publication preview after the fact. Interestingly, in iTunes Producer, it says "Optional Preview", so that's why I didn't worry about including it. I click on "choose", then navigate to where I saved the sample book file, and it is greyed out so I can't select it. I did try starting from scratch, but it still didn't include the preview. If I save the preview in iBooks Author's default location, then I can't find the files anywhere on my computer, so I just saved it in my documents. Any ideas?

For the preview, when you have your book open in iBooks Author, go to the File Menu and select duplicate. This will create a duplicate copy of your book. You may want to rename it. On the second copy, decide what pages you want to include in the preview/sample book, and delete all the other pages. Once you've saved the shorter version, go to the file menu and select export. This will bring up a window, where you should make sure you've clicked on iBooks for the export type. Then it will ask you to name and save it.
Once you've done that, open the iTunes Producer file with all your book information, and find the box for the preview version and then navigate to the new file and add that. Then when you upload your book, it should include both the full book and the preview version.

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

As a mobile me user I uploaded my photographs for clients to view and download. How do I do this in ICloud?

As a mobile me user I uploaded my photographs for clients to view and download. Can and how do I do this in ICloud?

You can't. The Gallery service in MobileMe does not exist in iCloud. You will need to switch to another photo hosting web site.

I created a book at the Ibooks author. But there are pages where the number of the page does not appear. How I can solve this problem? I thank you very much for any tip.

I created a book at the Ibooks author. But there are some pages which the number of page is not visible. What can I do to see the number of the page?

Have you changed the template?
Some pages may not have numbers in place as default. If you have changed the page or the template page, you may have added a object which as pushed the number out of view, or an image may be in a layer on top of the text.
If you select one object on the page...then go to Edit, select all, you should see the outlines of any content no matter that content may not be seen. Look at the bottom for a page width rectangle outline.. IF its there, you need to shuffle the content until you find that box, and use Arrange > bring to front.

Uploading a book for a client author

Similar Messages

Maybe you are looking for