Uploading a document inorder to create index category

I've just installed TREX 7.0 and completed most of the Technical configuration for E-recruiting 604. I am currently on step "Add document attributes to Index Category" which requires an index category to be created for document area HR_KW. Inorder to do that, there needs to be atleast 1 document uploaded. I haven't been able to figure out yet the most effective way to upload a document. How can I accomplish this?

Hi,
as you are probaly not uploading directly to TREX but rather to your e-recruiting application, it may be better to ask in that area (HCM).
Best, Karsten

Similar Messages

How to create index category for TREX in ECC for E-recruiting

Hi guys,
   i have finished the settings in SKPR07 transaction for SSR and attached to the HR_KW the SSR id.
   But i don't know how to create or generate the index category.
   From the posts of this forum someone told me to regenerate the index in SKPR07 , but i failed.
   Can anyone show me the way?
   Thanks in advance.
    sheery

The solution is so simple you want to kick yourself....
You need to upload a document. The index catagory is created automatically. I recommend simply adding an attachment to a candidates profile.
;p)

Build Up new TREX index category and leave old catgory for search requests

Hello All,
we are using TREX 7.1 in a SAP Netweaver Environment only for a full text search in transaction CV04N. The TREX Server is running on a Unix machine.
But no we have a problem that our current productive index category contains an inconsistent tempterm failure. Because of this failure it might be that the search result list may not contain all documents for the search query
Therefore we have to rebuild our big index in a complete new index category. And because this takes a lot of time we would not have all of our documents searchable in the index.
Now my question: Is it possible to use the existing index category to search after documents whereas a new index category will be build up in an initial and incremental indexing process (BOTH FROM THE SAME SAP SYSTEM)?
THANKS.
Christian

Hi,
Now for the step activate index category enter the search server id TREX_SSR as you have created. keep it as it is.
Then check for the rfc destinations if its fine and the link is made.
Now after that you will create the index category so only refer to the last step(split in multiple to create the index category as in the document).
Regards,
Divya

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
<b>error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.</b>
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Creating new 'category/index' for apple loops in logic

As well as the standard apple loops, I currently have an additional apple loops jampack & a number of self-made apple loops.
These have been indexed automatically, & can be referenced via the drop-down on the top right of the loop browser as 'jampack' & 'my loops' respectively.
I've just bought a 3rd party dvd of apple loops, & would like to be able to reference these via the same kind of category in the loopbrowser drop down, however, the 3rd party DVD has no 'installer' like the official jampack, but instead just has folders of 'apple-loopyfied' AIFFs to drop in the loop browser.
I assume if this is the case they will appear by default under 'my loops', which isn't ideal - is there a way I can manually create another category(/folder?) for these loops which I can reference via Logic's loop browser drop-down?
Any help appreciated
Adam

ok, still stuck on this but have found the following from page 61 on 'new in logic 7.2'
http://manuals.info.apple.com/en/NewFeatures_in_Logic_Pro7.2.pdf
'To keep things tidy, the loop browser offers advanced loop management tools, the jam pack management drop-down allows you to limit the display to loops from a specific jam pack, or other folder' .....then....describing an option from the pull-down, 'vendor x - choose to play loops from a specific third party vendor'
- this looks perfect for what i want to do, but i assume a vendor must include certain data/meta-data in their loops for this indexing to work & display under vendor x as a dropdown, how do i know if the dvd I have bought will have this? hmmmm....

How to create a workflow composite with the ability to upload a document in

Hi,
Is there any way to attach/upload a document while creating or modifying a user.
I have a requirement where user will create a document(.xls/.csv/.doc) with his details and he needs to upload that document while updating the profile. If he is creating the profile then this document has to be forwarded to his manager. By validating the document manger will approve the request.
Any help on this is greatly appreciated.
Regards,
mahantesh

Use a JFrame and paint on the content pane. Or a Frame with a Canvas (who the heck still uses AWT?).
They probably don't do anything because painting a button is not enough. It actually needs to be a button. Or Menu.

Can't select "include book documents" when creating index in InDesign CC

I'm trying to make an index for several dokuments in a book. I've made the index but when I try to generate the index the checkbox is greyed out so I can't check it. Do You know what's wrong?

Thank You. That worked well.
One more question: It looks as if the index does not include the words of all the documents in the book. Is it something I do wrong?
Thanks
Henning
Fra: Peter Spier <[email protected]<mailto:[email protected]>>
Svar til: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Dato: onsdag 10. juli 2013 13:04
Til: Henning Kristoffersen <[email protected]<mailto:[email protected]>>
Emne: Can't select "include book documents" when creating index in InDesign CC
Re: Can't select "include book documents" when creating index in InDesign CC
created by Peter Spier<http://forums.adobe.com/people/P+Spier> in InDesign - View the full discussion<http://forums.adobe.com/message/5491834#5491834

How to create index in word document?

Hello,
Is it possible to create a index in word document from abap code (ole)?
Thank you for response..
Alfonso

1.Goto the transparent table KNA1
2. select the button Indexes (which is next to the techincal settings button)
3.list of alredy existing indexes are displayed
4. in the dialog displayed select the icon create.
5. specify the name for the index to be created ( should start with Z)
6. screen for specify the index fields will appear, specify the details based on your requirement.
Note:
1.creating an index will created a sorted copy of the DB table with data with limited fields
2. Try using already created indexes , only if necessary create new index
3. Here table KNA1 is used as an example

Will iCloud upload all documents (not just those created in pages?) on my hard drive?

Do we have the option of uploading other documents not created by Pages, for example. Documents created by TextEdit, PDF files, Word, etc.?

No. iCloud does not provide general file storage in the manner of MobileMe's iDisk: in this regard its space is only for direct access by compliant programs, currently only iWork.
There are many online alternatives: this page examines some options -
http://rfwilmut.net/migrate3

E-rec How to create or generate the index category????? SOS!!!!!

Hi guys,
How to create or generate the index category?.
From the posts of this forum I have read more things but anything works:
reports:
-RSRETT02
-RCF_INITIALIZE_KPRO
-RSTIRIDX_INDXCAT_RETRIEVE
Can anyone show me the way?
Thanks in advance.

Hello,
If you haveat least Version 7.10.18 then KPro configurations are no longer required. Did you activate Business Function HCM_ERC_SES_1 as this is required for SES? The scenario to choose will depened on whether you are making a new implementation, upgrading without use of SES before or upgrading after using SES with earlier versions. Scenario 1 is for when you have activated HCM_ERC_CI_3 after using earlier versions with HCM_ERC_SES_1 already activated. Scenario 2 is for those who have upgrade and activated HCM_ERC_CI_3 but where using search without SES in their earlier version. Last scenario is when you are making a new e-Recruiting implementation (not upgrading). Also check notes 1426757 and 817145.
When you try to search are you getting an error? Can you check in SLG1 transaction after trying to search and post the error messages. Also can you execute report RCF_CHECK_SEARCH_SETTINGS as it will point you to the missing configurations points if any based on your version.
Regards,

Create new project files with uploaded word document

How do I create a new project file with an uploaded word document. I tried to follow the guidelines using the Robohelp PDF file but after I upload the word document, I cannot see it in the workspace. Are there other steps to bring the document into Robohelp 9. I am using the trial version and have never used Robohelp before.
Thank you!

I was finally able to fix my problem and I hope to publish this in as many pages as I can. First I had the exact same issue. My file was password protected (the one I used as a shell for a new project) spent two hours of work, went home and next
day “Nothing” same errors. Cannot open file etc. etc. So after two hours searching the net I found this company that has a
Project Repair Toolbox that is cloud based for FREE (no useless downloads).
I went in > It asked me for the file that I had on my local drive > prompted me for the password and > BAM! the file opened right up. Since it as viewer only I was able to at least begin re-typing the project plan which was small in nature.
Check it out, hope it works for you.
http://www.project.repairtoolbox.com/

Unable to search documents after creating Index

hi all,
i've created index and assigned datasources to that index.but when i try to search that documents it is showing tht "No matches have been found "
where as in applicaiton log it is displauing follwing message
Error 11/29/05 6:30:03 PM XCrawlerService Failed to create crawler task SubscriptionCrawler - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check error: the e
so, can any body help me to solve above problem
regards
gnana

Hi Gnana,
You may try searching on http://service.sap.com/patches
You will have to search for ur requrired patches. You would also find pdfs, giving details on the same.
All the best.
Awaiting Reply.
Warm Regards,
Ritu R Hunjan
Message was edited by: Ritu Hunjan

Creating Index for PDF documents

Hello,
I am trying to index a column in one of my tables that contains a BLOB object that is a PDF for each record. I want to create an index on that column so I can search through the contents of these PDFs.
I have tried several times to create the index using this sql command:
create index rep_index on report(report_binary)
indextype is ctxsys.context;
I have also tried it with severa other variations using the parameter list, but I believe that this way is sufficient because all the default options, as I understand them, are good enough for a search through PDFs.
The command did succeed in creating the index (or so it claims), but when I query using the contains method no pdfs are ever returned. Here is an example query after the index is created:
select score(1), report_id from report where contains(report_binary, 'the', 1) > 0 order by score(1) desc;
That and other similar queries never return anything!!
Is there some piece of the index creation specific to BLOBs that I am missing?
thanks for the help!
-- Joseph
Edited by: user12036946 on Oct 9, 2009 10:40 AM

"the" is a stopword for English-language default installations, so that particular search won't find anything.
Try
select token_text from dr$rep_index$i to see if you have any indexed words. If you do, try searching for one of those.
If you don't have any indexed words, check the view ctx_user_index_errors to see if there are any row-level index creation errors.
What version and platform are you running on? The filters which provide the processing of PDF files are not available on all platforms - for example prior to 11g we didn't support Solaris X86-64.

Problems on Creating INDEX for ORDSYS.ORDDOC type

I have a table 'docs'
CREATE TABLE "TEST"."DOCS"
("ID" VARCHAR2(2048 byte) NOT NULL,
"DOCUMENT" "ORDSYS"."ORDDOC",
"DUMMY" CHAR(1 byte) NOT NULL)
The field DOCUMENT contains a number of documents a mixture of .doc and .pdf files. These where uploaded using the code wizards for the web toolkit. Now I want to INDEX DOCUMENT so I can implement a web search facility.
I'm currently following the xamples on http://download-west.oracle.com/otndoc/oracle9i/901_doc/text.901/a90121/cdatadi3.htm#43365 NESTED_DATASTORE Example (Intermedia Documentation)
I did this
ctx_ddl.create_preference('ntds','nested_datastore');
ctx_ddl.set_attribute('ntds','nested_column', 'dummy');
ctx_ddl.set_attribute('ntds','nested_type', 'ordsys.orddoc');
ctx_ddl.set_attribute('ntds','nested_lineno','source');
ctx_ddl.set_attribute('ntds','nested_text', 'comments');
when creating the index using ntds it is complaining about ordsys.orddoc
create index docindx on docs(dummy) indextype is ctxsys.context parameters('data
store ntds')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-50857: oracle error in dricon.get_type_data_type
ORA-20000: Oracle Text error:
DRG-12801: invalid type: ORDSYS.ORDDOC
ORA-06512: at "CTXSYS.DRUE", line 157
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 176
I'm not convince on the 'nested_lineno' parameter can anybody tell me how this can be done.

I'm forced to use ordsys.orddoc since 'interMedia Code Wizard for the PL/SQL Gateway' won't generate the code for a clob it only recognizes intermedia objects.
since orddoc.comments is a clob I cannot see why there shouldn't be a way to index it. What's the use of storing documents in ORDDOC when you can't search them??

DOCUMENT CLASSIFICATION AND CTXRULE INDEX TYPES IN ORACLE9I TEXT

제품 : ORACLE SERVER
작성날짜 : 2004-05-27
DOCUMENT CLASSIFICATION AND CTXRULE INDEX TYPES IN ORACLE9I TEXT
================================================================
PURPOSE
이 문서는 Oracle9i 에서 추가된 새로운 기능으로 Oracle Text 에서의
문서 분류기능(Document Classification) 에 대해 소개한다.
Explanation
Oracle9i Text 에서는 CTXRULE index type을 이용하여 각 문서를 분류하는 기능을
구현할 수 있다. 이 CTXRULE index type은 각 분류별로 define 된 rule에 따라
문서를 indexing하고, 이러한 기능을 위해 MATCHES operator를 제공한다.
이 Oracle9i Text 는 일반 Text, XML, HTML 문서에 대해 이 document classification
기능을 지원한다.
1. Create a Table of Queries
먼저 다음과 같이 조회를 위해 분류할 category를 저장할 table을 생성한다.
CREATE TABLE myqueries (
     queryid NUMBER PRIMARY KEY,
     category VARCHAR2(30),
     query VARCHAR2(2000) );
아래와 같이 조회시에 문서의 category name과 query시 사용할 구문을 저장한다.
INSERT INTO myqueries VALUES(1, 'US Politics', 'democrat or republican');
INSERT INTO myqueries VALUES(2, 'Music', 'ABOUT(music)');
INSERT INTO myqueries VALUES(3, 'Soccer', 'ABOUT(soccer)');
2. Create the CTXRULE Index
CTXRULE index를 이용하여 이 table에 Text index를 생성한다.
CREATE INDEX myqueries_idx ON myqueries(query)
INDEXTYPE IS CTXRULE
PARAMETERS('lexer lexer_pref
storage storage_pref');
이 CTXRULE에는 filter, memory, datastore, stoplist 는 지정할 수 없다.
3. Classifying a Document
아래와 같이 실제 데이타가 저장되는 table을 생성한다.
CREATE TABLE news (
     newsid NUMBER,
     author VARCHAR2(30),
     source VARCHAR2(30),
     article CLOB);
이 Table에 data를 insert하기 전에 MATCHES operator 를 이용하여 지정한 내용에
대해 문서를 분류하여 query table에 저장하는 trigger 를 생성한다.
You can create a before insert trigger with MATCHES to route each document to
another table news_route based on its classification:
CREATE TRIGGER NEWS_MATCH_TRG
BEFORE INSERT ON NEWS
FOR EACH ROW
BEGIN
-- find matching queries
FOR c1 IN (select category
from myqueries
where MATCHES(query, :new.article)>0)
LOOP
INSERT INTO news_route(newsid, category)
VALUES (:new.newsid, c1.category);
END LOOP;
END;
RELATED DOCUMENTS
Oracle9i Text Application Developer's Guide Release

Hi,
please post a Oracle Text question in the Oracle Text forum: Text
That forum is monitored by Oracle Text Experts. This forum not always.
Herald ten Dam
Superconsult.nl

Uploading a document inorder to create index category

Similar Messages

Maybe you are looking for