Uploading data related to storage bin

Hi,
what are the tables to upload with LSMW the field Maximum weight in the screen of trx LS02N?
Best regards

Hi,
try with trx LSMW with a Batch Input Recording if you want to modify your storage bins data.
If you want to create them you can use as I told before the LSMW trx
with the option Standard Batch/Direct Input, you can also do that from SPRO, Warehouse Management, Master Data, Storage Bins, Define Storage Bin Structure
Best regards

Similar Messages

How to upload company code data related to Company Code BP01?

How to upload company code data related to Company Code BP01 FOR CIN?

Hi,
First check whether all the pre-requisites are completed.
I'm assuming you have installed the Best Practices Baseline package (for country IN). If you have succeeded in actvating the buildig blocks (as per your scope) using Solution Builder, you would have populated all the company code data related to Co. code BP01. Looks like some steps are missing.
Please refer to the OSS note 1408706 in this regard. From there, you also can refer to the "Quick Guide to Implementing the SAP Best Practices Baseline Package V1.604 (DE), which is self-explanatory.
Let me know if this helps.

Date of last inventory for the storage bin

Hello,
We would like confirm that when use the T-code LX26 for Carry out Inventory using the Cycle counting method.
Date of last inventory for the storage bin i,e. date when inventory was last taken in the Warehouse number for a any storage bin shows as 00.00.0000(It is not displaying the any date).
Whether this is a System standard behavoiur or Any other reason.
Please guide me waiting for your reply.
Regards
Sarin.

Hi,
Thanks for your reply.
I have checked in the Field,it showing in the Field.
In T-code LX26 if i take a report for entire WM number it show for some of the Old Inventory date for the some of material
You mean to Say bins were not taken into account for the cycle counting.
How it will be,there is any reason for this .
I am waiting for your reply.
Regards
Sridhar

Error while uploading data in LT03?

Dear All,
I am uploading data in LT03 transaction and I am getting an error message 'System cannot find source storage bin'.
I am using BAPI 'L_TO_CREATE_DN'.
Even same error I am getting in recording.
This is happened in the case of Partial delivery not for full delivery.
Thanks and Regards
Steve

Hi,
Search SCN before posting a query...
System cannot find source storage bin
Regards
Praveen

Production Order to storage bin link

Hi Experts,
I have to develop a report where the client wants to track a FG (Batch managed) based on production order. One of the columns is storage bin as well. Is there a link to production order no and storage bins in SAP tables. Please suggest.
Regards,
Sachin

Hi Vivek,
I went through the logic you provided. Also the requirement has changed a bit. The client wants to track all the material movements related to the orders (261 and 101) with bin numbers. The selection screen is going to be order numbers or material numbers and a date range. It will be either (order no + date range) or (material no + date range).
For order no within a date range, I am passing all the materials in MKPF and looking for material documents posted within this particular date range. Then I am going to MSEG with these material documents and looking for the entered order numbers.
Now, since the MSEG table is too big and the order number is not a key field, I find myself in a big performance issue. Any suggestions would be greatly appreciated.
Regards,
Sachin

Storage Bin Type Search

This question relates to teh storage bin type search.
When a storage bin type is assigned to a number of different storage unit types, when the systen is trying to putaway a material, does it assign preferentially according to how storage unit types are listed in this table or when finding the next empty bin, does it simply check this table to make sure that the storage bin type is compatible with the storage unit type. For example, if the storage unit type is a half pallet and the next empty bin can hold both a full pallet and a half pallet, will the system try and find a half pallet space or will it simply place the SU into the full pallet space.

Hi,
It will work like this in the material master palletization data you will assign the Storage unit type and in OMM1 you will assign the storage unit type to the storage bin type (search criteria).
So if you have HP, then in the storage type it is next empty bin it fin the FP and then HP, system will place it in the HP only.
thanks,
JK

Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

Hello Abapers,
I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
Please help or suggest.
Regards
Pradeep

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

Available stock shortfall of & in interim storage bin

Hi gurus,
I am doing the movement type 261 in MIGO with reference to a reservation.
I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
100000000026; Available stock shortfall of 10.000 M2 in interim storage bin
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 100. However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
For my storage type 100 I do not have defined any strategy in the customising.
Could you help me with this, please?
Kind regards.
SP

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

Storage bin Capacity utilization is greater than 100%

Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
Thanks

For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Getting error while uploading data using the EXCEL( GUI_upload)

Dear Freinds,
I am uploading data from my excel sheet to my Custom table . I am using the below code
call function 'GUI_UPLOAD'
exporting
filename = l_fn
filetype = 'BIN' "'ASC'
has_field_separator = 'X'
tables
data_tab = p_i_ins_db
exceptions
others = 17.
i can see in my internal P_i_ins_db ...all the data is coming in encrypted format.
The flat given to me is the .CSV file .
Could any one please let me know how i can upload the data which is there in .csv file.
regards
syamala

Hi Syamala,
Before using the GUI_UPLOAD to upload the data from the excel file to the internal table,you can try usng the Function Module 'SAP_CONVERT_TO_TEX_FORMAT' or 'SAP_CONVERT_TO_CSV_FORMAT' as it helps n formatting the data.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

Error in uploading data from DSO to Infocube in 3.5(rsa1old)

While uploading data from DSO to Infocube, I selected Initial update option
In schedule tab when I clicked start, an error occured it says:
Delete init request
REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
init. again with same selection.
Can anyone let me know how should I delete that request.
Thanks,
Soujanya.

Hi,
Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
Regards,
JD Datuin

Issue while uploading data from R/3 production to BW production

Hi,
We are facing an issue as follows.
We are trying to transfer master data from R/3 Production server to BW Production server.
For the first time when we transfer data, upload is happening properly. But for the second upload - we dont get any error where as in the monitor data transfer shows 0 from 0 records and the status never changes.
But if we restart the BW production server and then upload data, it works fine for the first upload but the same issue from second upload.
Any suggestions please?
Regards,
Ram.

Hi,
Roberto - In ST22, there is no short dumps related to this issue. The issue is not specific for a single object. For eg. If i upload 0MATERIAL (after restarting the server) it works. Now I try to upload 0DIVISION (any object) it doesnot get uploaded.
Sriram - We are trying Full Upload.
Hari - I can see the records in RSA3 of the source system. The records are available and also they are extracted properly.
Shreya - Basis people are also involved and trying to find out a solution.
Manfred - Actually data is available. But the data doesnot get uploaded. So i guess changing the traffic lights settings might not help.
Regards,
Ram.

Uploading data related to storage bin

Similar Messages

Maybe you are looking for