Uploading error: .css to remote site

I can not upload the cascading style sheets to the remote
site when I try to "put files". I can move all other files (.html
and .jpgs).
I get the following message:
error occurred - An FTP error occurred - cannot put
.stylesheet.css. Access denied. The file may not exist, or there
could be a permission problem. Make sure you have proper
authorization on the server and the server is properly configured.
What should I do differently when saving or creating the css
for the website?

Welcome happy dreamweaver ;) lol
hey man im seeking a cool set of video tutorials to help me
better understand how to create dynamic pages end such let me know
if you have

Similar Messages

  • Am having difficulty uploading editorial changes to remote site ???

    Edited pages in Dreamweaver do not upload to the remote site.  I have been doing this for years and suddenly the changes simply do not upload.

    FTP connection works
    server is online
    no changes to Dreamweaver
    Am using CS4
    David_Powers <[email protected]> wrote:
    David_Powers http://forums.adobe.com/people/David_Powers created the discussion
    "Re: Am having difficulty uploading editorial changes to remote site ???"
    To view the discussion, visit: http://forums.adobe.com/message/4755489#4755489

  • More uploading errors.  This time site works but mobile me can't be updated

    Someone gave me some advice to be patient as the apple servers are weird at times. I did find that my site published, then all pages turned red, wasn't published, etc.
    Each time I upload it is close to 4 hours so each experiment is taking a long time. This morning it got all the way to looking like it was finished uploading then it gave me one error message about a file. I re-published later, again close to 4 hours. Now, it says there was a publishing error--"mobile me could not be updated" but all the pages have turned blue and my site appears to be working.
    any idea if this is a cause for a concern? Will I have problems? Should I check something else on mobile me? I'm logged in and all looks good in system pref.

    Maybe one or several entries are causing trouble. I suggest you check your pages and see if there is something weird. But it looks like things are improving each time you try publishing.
    My idea is that iWeb somehow has stored lots of unnecessary information from old versions, corrections, and probably is picking the wrong information sometimes. Just an idea why it can act weird.

  • Help with uploading files to remote site

    I am trying to upload files onto a remote site, but it keeps
    timing out. Also, on my new website that i'm making for a client,
    when i Put the files onto the remote site it says Started:
    5/30/06 7:57 PM
    index.html - error occurred - An FTP error occurred - cannot
    put index.html. Access Denied. The file may not exist, or there
    could be a permission problem.
    File activity incomplete. 1 file(s) or folder(s) were not
    completed.
    Files with errors: 1
    index.html
    Finished: 5/30/06 7:57 PM
    What does this mean? why are the file incomplete?
    Mike S

    Have you successfully uploaded to this site before?
    Is your site definition configured to upload to the proper
    remote folder?
    The error message is simply telling you the transfer did not
    succeed
    "mikesilverman22" <[email protected]> wrote
    in message
    news:e5im76$r17$[email protected]..
    >I am trying to upload files onto a remote site, but it
    keeps timing out.
    >Also,
    > on my new website that i'm making for a client, when i
    Put the files onto
    > the
    > remote site it says Started:
    >
    > 5/30/06 7:57 PM
    >
    > index.html - error occurred - An FTP error occurred -
    cannot put
    > index.html.
    > Access Denied. The file may not exist, or there could be
    a permission
    > problem.
    >
    > File activity incomplete. 1 file(s) or folder(s) were
    not completed.
    >
    > Files with errors: 1
    > index.html
    >
    > Finished: 5/30/06 7:57 PM
    >
    > What does this mean? why are the file incomplete?
    >
    > Mike S
    >

  • Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

    Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
    thanks 
    Log Name:      Application
    Source:        System.ServiceModel 3.0.0.0
    Date:         :
    Event ID:      3
    Task Category: WebHost
    Level:         Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      FL-CAS1.WOMBAT.LOCAL
    free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
    thanks I have no idea how to fix 
    Description:
    WebHost failed to process a request.
    Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
    Exception: System.ServiceModel.ServiceActivationException:
    The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation.  The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
    are [https].. ---> System.InvalidOperationException:
    Could not find a base address that matches scheme http for the endpoint with binding
    ++++

    Hi 
    This issue could be with corruption in  Autodiscover and web services virtual directory 
    Replace Web.config file for Autodiscover and web services virtual directory from the other working site
    Delete and Recreate  Autodiscover and web services virtual directory 
    Do this only  on the affected site 
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Dreamweaver cannot upload files larger than 2gb to remote site

    I am uploading a set of large video files to a remote site at the University of Connecticut.  I have no problem doing this through Cyberduck. I can also upload (put) files to the  through Dreamweaver provided that the files are smaller than 2gb.  Dreamweaver gives me the following type of error:
    WorkArea\VideosUnclipped\100ASL\sara\signs\XX20140703a0789.MOV - error occurred - An HTTP error occurred - cannot put XX20140703a0789.MOV.  Access denied.  The file may not exist, or there could be a permission problem.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    WorkArea\VideosUnclipped\100ASL\sara\signs\XX20140703a0789.MOV
    Finished: 7/16/2014 5:31 PM
    Since Cyberduck is successful, but Dreamweaver is not, this looks like a problem with Dreamweaver.  I would prefer to use Dreamweaver because i am more comfortable with the interface.
    I am using dreamweaver cs6

    Hello,
    first, my knowledge is, the limit depends all on your hosting. FTP client is just the middleman. Please go into contact with your provider.
    On the other hand it's well known, that in all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
    To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
    Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
    And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
    http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
    Mac: Mac OS X (Use: Show additional download options)
    http://filezilla-project.org/download.php
    Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
    Good luck!
    Hans-Günter
    P.S.
    Since I use two screens, the whole thing became even more comfortable.

  • Error Uploading phone/css/master_a-master.css HELP

    I have created a site in all three modes. Desktop, Tablet, and Phone and the ony new one is the Tablet. I have had success with he desktop and phone versions and now that I have the Tablet version, its stopping the upload to the FTP and saying thee is a error Uploading phone/css/master_a-master.css ?? I need this to go live asap. anybody know why this is happening?

    Hello,
    What's the method that you're using to upload the site? If you're trying the "File -> Upload to FTP host" option and you get this error, you may also want to upload the site to the host by first exporting the contents of the site to a location of your choice using the "File -> Export As HTML" option and then uploading to the host via an FTP client like Filezilla, WinSCP etc. to check if that allows the upload.
    Hope this helps.
    Cheers
    Parikshit

  • Error When Uploading a CSS file or  Static file

    When I am uploading a CSS or Static file , I get the following error. But I can upload images files with no issues.
    ORA-02291: integrity constraint (FLOWS_FILES.WWV_FLOW_FILE_OBJ_FK) violated - parent key not found
    Oracle XE upgraded to Apex 3.1
    Please help
    George

    Yes, if you upload an image on a normal Oracle Apex Database its stored in the DB.
    But, if you remember, when you configire apex you specify an images directory /i/.
    Under this directory you will find all the images that apex uses as well as css files, etc.
    If you place your image in this directory you can reference it my modifying the appropriate stylesheet/template.
    So, for example, you cna place your own stylesheets in the appropriate directory on the server.

  • Partition ERROR - 1023040 - msg from remote site : need to understand

    hi,
    I currently have a problem with the partitions between two cubes.
    Architecture:
          80 countries database (source)
          1 world database (destination)
    Process :
    - The partitions are created dynamically by maxl scripts :
    spool on to $1;
    Alter application $2 comment '**_batch_**';
    Alter application $4 comment '**_batch_**';
    Alter system load application $2;
    Alter system load application $4;
    Alter application $2 disable startup;
    Alter application $4 disable startup;
    Alter application $2 disable connects;
    Alter application $4 disable connects;
    /* Create Transparant Partition between Country cube to Mond cube */
    create or replace replicated partition $2.$3
    AREA
    '"S_R_N",
    &curr_month,
    &local_currency, "D_EURO",
    @IDESCENDANTS("P_Produit"),
    @LEVMBRS("M_Marche",1),"M_Marche",
    @IDESCENDANTS("B_Marque"),
    @IDESCENDANTS("U_Sourcing"),
    @REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
    @IDESCENDANTS("NA_Nature"),MCX'
    to $4.$5
    AREA
    '"S_R_N",
    &curr_month,
    "D_DEV", "D_EUR",
    @IDESCENDANTS("P_Produit"),
    @LEVMBRS("M_MixClient",0),"M_MixClient",
    @IDESCENDANTS("B_Marque"),
    @IDESCENDANTS("U_Sourcing"),
    @REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
    @IDESCENDANTS("NA_Nature"),MCX,
    &country_name'
    mapped globally ('',D_$7, "D_EURO", "M_Marche") to (W_$6,D_DEV, "D_EUR", "M_MixClient")
    refresh replicated partition $2.$3 to $4.$5 all data;
    drop replicated partition $2.$3 to $4.$5;
    Alter application $2 enable startup;
    Alter application $4 enable startup;
    Alter application $2 enable connects;
    Alter application $4 enable connects;
    Alter application $2 comment '**_enable_**';
    Alter application $4 comment '**_enable_**';
    Alter system unload application $2;
    Alter system unload application $4;
    Spool off;
    Logout;
    exit;
    - Defragmentation cubes, launch replications countries successively one by one to the world cubes sequentially .
    the order of the country is not the same from one month to another .
    Treatment is initiated each month.
    Symptoms :
    - Partition fall into error with the following message but not systematically .
    message:
    MAXL > refresh replicated partition PGC_ESP.Pgc_esp PGC_MOND.Pgc_mond to all data ;
       ERROR - 1023040 - msg from remote site [ [ Wed Nov. 29 10:21:03 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1023040 ) msg from remote site [ [ Wed Nov. 29 10:21:02 2013] hprx1302 / PGC_ESP / Pgc_esp / PGC_ADMIN / Error (1023040) msg from remote site [ [ Wed Nov. 29 10:21:01 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1042012 ) Network error [ 32] : Can not Send Data ]]] .
    We note that the error occurs in the following cases:
    - The errerur happens generally when the average clustering ratio is low. (cube fragmented) for cubes source and / or destination
    - When beacuoup replication were done before: in the last 10 to 15 cubic remaining replicate.
    - We mistake once on the environment recipe on the first cube with average clustering ratio to 0.96 but the server recipe is much less efficient.
    We noticed that when doing a defragmentation cubes source and destination once the error obtained treatment replication was no longer falling into error.
    Problem: defragmentation cube world take 10 hours.
    We also made the following observation:
    OK/INFO - 1051034 - Logging in user [PGC_ADMIN].
    OK/INFO - 1051035 - Last login on Friday, November 29, 2013 10:19:46 AM.
    OK/INFO - 1053012 - Object [Pgc_esp] is locked by user [PGC_ADMIN].
    OK/INFO - 1053012 - Object [Pgc_mond] is locked by user [PGC_ADMIN].
    OK/INFO - 1053012 - Object [54116855] is locked by user [PGC_ADMIN].
    OK/INFO - 1053012 - Object [39843334] is locked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [54116855] unlocked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [39843334] unlocked by user [PGC_ADMIN].
    WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
    OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
    OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
    WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
    OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
    OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
    OK/INFO - 1241124 - Partition replaced.
    Following these findings we need to understand what is happening.
    We would like to understand why partitons fall errors?
    why we have the message "Partition definition is not valid" in the logs when creating the partition?
    Regards,
    Oliv.

    Hi SreekumarHariharan,
    Tx to your anwers, but we are already try all the solution proposes to Essbase FAQ.
    a)Increase the values for NETDELAY and NETRETRYCOUNT in essbase.cfg file.Restart the essbase server.
    We are changed the two value in the essbase.cfg but nothing to do. The same error appears
    b)Make sure that the all source members and target members used in partition are in sync
    All member are diferent between source and target but a mapping are defined in the partition (see the partition maxl in my below message.
    c)Validate the partition (look at the validation tab, it will give the numbers for each side of the partition ie source area and target area)
    You can see the logs of validation partition :
    WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
    OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
    OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
    WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
    OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
    OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
    OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
    OK/INFO - 1241124 - Partition replaced.
    d)Rerun the Partition script again
    The same error appears.
    Tx to your help.
    Regards,
    Oliv.

  • Can no longer access remote site in DW CS5

    I've recently upgraded to CS5, when I attempted to upload a PS file to my website in DW I foolishly denied the permissions for CS5.  This has changed my remote server somehow so I can no longer update the website.  Also I've lost all my folders on the remote site and there is now just an empty folder with the name "pub".  The following is the error msg I receive when trying to upload files:
    public_html/e-mail/ - error occurred - Unable to create server folder /public_html/e-mail/.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.
    public_html:e-mail:qxblast.html - user cancelled
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    /public_html/e-mail/
    I've double checked the folders, ftp information, proxies and everything but nothing seems to change this site.
    Any advice or ideas of how to fix this would be greatly appreciated, thanks.

    Mac? Windows?
    Firewall?
    Also contact your host just to be safe because sometimes these end up being ownership issues which, in a shared hosting environment, cannot be changed by you.  You would only be able to change them if you are in a VPS/Dedicated environment.

  • Best option to transmit CSV file as POST data to remote site

    I'm quite new to the SAP scene and am tasked with getting some data out of our database and up to a third party web application.
    Their API requests the data be formatted as a CSV file and uploaded as an HTTP POST attachment (file upload) to their site.
    What's my best approach to this?
    We have PI, but I just learned about CL_HTTP_CLIENT and am hoping I can do this move directly from the ABAP environment but am unsure of the sorts of technicalities involved with either of these options.
    Can I setup a "service" in PI that simply posts data to a URL (as opposed to sending a SOAP request)?
    What sort of setup do I need to do to get CL_HTTP_CLIENT to talk to the remote site? I've tested with HTTP_POST and get an SSL error even when posting to a non-ssl url (http).

    public
    void Save(IPropertyBag
    propertyBag, bool clearDirty,
    bool saveAllProperties)
    object val2 = (object)_event;
    propertyBag.Write("Event",
    ref val2);
    object val3 = (object)_fullload;
    propertyBag.Write("FullLoad",
    ref val3);
    object val4 = (object)_sharedsecret;
    propertyBag.Write("SharedSecret",
    ref val4);
    object val5 = (object)_content;
    propertyBag.Write("Content",
    ref val5);
    object val6 = (object)_clienttype;
    propertyBag.Write("ClientType",
    ref val6);
    object val7 = (object)_clientinfo;
    propertyBag.Write("ClientInfo",
    ref val7);
    object val8 = (object)_clientversion;
    propertyBag.Write("ClientVersion",
    ref val8);
    #endregion
    #region IComponent
    public
    IBaseMessage Execute(IPipelineContext
    pc, IBaseMessage inmsg)
    //Convert Stream to a string
    Stream s =
    null;
    IBaseMessagePart bodyPart = inmsg.BodyPart;
    string separator =
    new
    Guid().ToString();
    inmsg.BodyPart.ContentType =
    string.Format("multipart/form-data;
    boundary={0}", separator);
    //inmsg.BodyPart.Charset = string.Format("US-ASCII");
    // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a
    //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead.
    if (bodyPart !=
    null)
    s = bodyPart.GetOriginalDataStream();
    byte[] bytes =
    new
    byte[s.Length];
    int n = s.Read(bytes, 0, (int)s.Length);
    string msg =
    new
    ASCIIEncoding().GetString(bytes).TrimEnd(null);
    //Get boundry value from first line of code
    string boundry = msg.Substring(2, msg.IndexOf("\r\n")
    - 2);
    //Create new start to message with MIME requirements.
    msg =
    "MIME-Version: 1.0\r\nContent-Type: text/plain; boundary=\"" + boundry +
    "\"\r\n" + msg;
    //Convert back to stram and set to Data property
    inmsg.BodyPart.Data =
    new
    MemoryStream(Encoding.UTF8.GetBytes(msg));
    //reset the position of the stream to zero
    inmsg.BodyPart.Data.Position = 0;
    return inmsg;
    #endregion

  • Login wizard - CF9 server - "Coldfusion not is not running on the remote site" - YES it is!

    I use Dreamweaver to upkeep sites for several friends and clients. When I use the login wizzard on a server with CF8, it works fine. If I use it on a server with CF9, I can't get past the *Coldfusion not is not running on the remote site* error. Yes it is running.  I've tried connecting using FTP, RDS, directly over the network - you name it.  Same error.
    Any suggestions?
    Thanks
    Rick

    Hi Rick
    If you are trying to RDS log in to a remote server the host may have disabled this service... Most do, and should. Allowing remote RDS is a potential security risk.  Check with your host to see if this is the case.  If it is, it is always better to duplicate your host environment locally, that is be running CF9, and the database, be that MySQL, SQL Server, Access, or whatever locally and do all you development and testing there, then just upload the files when ready.
    Hope this helps.
    Lawrence Cramer - *Adobe Community Professional*
    http://www.Cartweaver.com
    Shopping Cart for Adobe Dreamweaver
    available in PHP, ColdFusion, and ASP
    Stay updated - http://blog.cartweaver.com

  • How can I change remote site definition without breaking all of the links?

    I've created a website and put it here http://home.comcast.net/~alpsf/index.html to test it during construction.  Now when I change the remote site definition on the local site in DW, all of the links are broken.  I now suspect the problem is that I made it site root-relative, and DW inserted /~alpsf/ in all of the links.  Is there a way to fix this?
    Thanks very much.

    You can do a find and replace to change the links globally. Make sure you do a complete backup of the site prior to doing this incase you don't do it correctly. Let me stress that again, backup your entire site incase you need to restore. If you have created a "new site" and this will not be part of the /~alpsf site, then you will need to define a new site and copy all the files into that folder (I am guessing this is the case). I would copy the files outside of Dreamweaver. You could do this without touching the files in the ~alpsf directory. There are a lot of variable here as I don't know exactly what you are doing.
    On the file menu select window/results-select search. (this is done if the search window is not open).
    Find in: Entire Current Local Site
    Search: Source Code
    Find: "/~alpsf/
    Replace:"/
    That should do it, but this is a very tricky thing. I wouldn't have a problem doing this as long as I have everything backed up.
    Jim
    Edited:You might have to go into your css, spry files and any others that has links to do the same (this time only select Find in: Current document once the document is open). Once that is done, delete the whole remote site and upload the changes once you check that everything is completed.

  • Problem in connecting to remote site

    I have set up an FTP user in the remote server which works
    perfectly fine when I click test connection. Now when I click the
    remote view or upload a file or connect to remote server I get this
    message -"Waiting for server" then I get this error message
    "Connection to the remote host is lost.Click the Connect button to
    reconnect". I have disabled my firewall too. This has been driving
    me crazy for a long time. Any source of help would be of great
    help.
    Thanx in advance.

    What do you have in the Host directory field of your Remote
    site's
    definition? It sounds like you don't have the right
    information here....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "surenr" <[email protected]> wrote in
    message
    news:e2b9k2$eab$[email protected]..
    >I tried using passive FTP in the remote dite definition.
    It seems to be
    >working
    > but I am not able to view any of the remote site folders
    or upload any
    > files.
    > When I click the test button I get this message:
    Macromedia Dreamweaver MX
    > successfully connected to your web server.
    >
    >

  • Load Data from Remote site

    Hello every one,
    I tried to load the data from remote site to stagging area with DB link, i used append hint and it gave this error, I was just wondering?
    ERROR at line 1:
    ORA-12840: cannot access a remote table after parallel/insert direct load txnORA-06512: at "JAMES.PKGCONVERSION", line 464
    any help please thank you
    i am not using all the columns, i am using selec in the insert. Thank you in advance
    Message was edited by:
    user553284

    I had commit after three inserts, I changed commit after each insert, it is working now,
    Does that really matter?
    Any idea please.
    Thank you

Maybe you are looking for