Uploading files are not going to correct area on server

I have switched computers and DW versions -- now have CS4.
I seem to have several folders names ***.com within main folder in my local files.  But when I upload revised files, these revised files are not going to the correct folder location on server.  The apparently correct folder is one folder depth in from where my revised folders are being uploaded, the revised folders are going to ***.com  but apparently they should be uploaded to ***.com/***.com   instead.
my site management remote is:   ftp.***.com 
help
octoberben

Local:   C:\Users\Carole-Lenovo\Documents\My
Webs\GoletaSports\goletasports.com\goletasports.com\goletasports.com\
(I know, it needs to be changed)
Remote:  ftp.goletasports.com
Thank you for help.  But in my remote files, this is the path that gets
uploaded--there is another goletasports.com within the root folder which is
where the files are seen on the web.
My local files are uploading to the root folder, not in the extra
goletasports.com folder.... Yikes
Carole

Similar Messages

  • Service Account details are not going through header(OSB Business service)

    Hi
    I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
    A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
    I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
    Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
    I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
    Can someone please help me why service account details are not going through business service request. Am I missing any steps?
    Thanks in advance
    KK
    Edited by: 966531 on Oct 23, 2012 4:23 AM

    Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
    Regards,
    Anuj

  • I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

    I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

    That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

  • My Camera Roll photos are not going to My Photo Stream. I have Wi-Fi and My Photo Stream is turn on.

    My Camera Roll photos are not going to My Photo Stream on my iPhone. I have Wi-Fi and My Photo Stream is turn on(iCloud).

    Not sure if you are referring to photos in the Camera Roll from before you turned Photo Stream on, but just in case you aren't aware, only new photos will go. Following quote is from: iCloud: My Photo Stream FAQ
    When you turn on My Photo Stream on your devices, all new photos you take or import to those devices will automatically push to your photo stream.
    iOS devices: New photos that you take automatically upload to your photo stream when you leave the Camera app and connect to Wi-Fi. My Photo Stream doesn't push photos over cellular connections.

  • My photos are not going automatically to my laptop in photo stream.  I have iCloud

    My photos are not going automatically to my laptop in photo stream.  I have icloud.

    As for iCloud Settings, make sure, that in Settings > iCloud "Photo Stream" is turned on, on both the phone, and the iPad. If that is the case, make sure you are in the right photo-folder on the iPad (in your case). You might be in the "Saved Photos" folder, into which the new photos are NOT automatically downloaded. If that is the case, know the following: It make take a while though for photos to be uploaded to iCloud and then downloaded again by the other device, depending on the network. Give it some time, say 10-15 minutes (check your internet connection before that). If it still doesn't work, try an iCloud backup (Settings > iCloud > Backup to iCloud) on both your devices.

  • Requests that are forwarded to another approver are not going to next stage

    We are having an issue with AE 5.2 with Forwarded requests.  When requests are forwarded to another approver and this person then approves the requests, they are not going on to the next stage in our workflow.  We have the Forward Type option set to 'Any one Approver' for the workflow stage.  Have also tried forwarding the requests with both the Forward With No Return and Forward With Return options.
    The approver that is receiving these Forwards is not listed as one of the approvers for the role in the request.  Is this the issue, are we not using the Forward process correctly, or is this a bug in AE 5.2.  (I think we are currently on SP 9 of GRC 5.2.)
    Thanks.

    Hi Bob,
    I am running AE 5.2 but do not use the "forward" feature. For request that require "role approvers" I have set up a seperate initiaor that includes the additional Stage for Role approval.
    I have initiators for 1) New User w/ no role approval 2) New User w/ role approval 3) Change User w/ no role approval 4) Change User w/ no role approval
    My "no role approvals" go through three stages 1) security initial review 2) Internal Control review 3) Final security provisioning; my "role approvals" go through four stages 1) security initial review 2) Role Approval Stage 3) Internal Control review 3) Final security provisioning
    If a request has roles that require approval and some that do not, the request will take the two seperate paths based on the roles defined for each; the provisoning will complete once both paths have completed all stages
    This allows us to treat the role approval just like any stage with assigned approvers and if multiple approvers allow for any one approver to complete the stage
    This is different from your approach of forwarding for role approval; I define the roles to the initialtors that require role approval, but gives you another perspective of doing it
    Jerry Synoga
    Ryerson,Inc.
    630-758-2021

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

    When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
    I can login fine via this address.
    http://[Server Address]:[Port Number]/ReaderExtensions
    And I can apply the extension successfully, but when I attempt to download I receive the error above.
    Application Alert" The file could not be saved. Are you sure you want to lose your results?

    Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
    Upgrade or downgrade it accordingly.
    Thanks,
    Wasil

  • Emails from the organization are not going through ePrint

    Hi,
    I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that 
    The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
    We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

    Hello praveen_haridas,
    Welcome to the HP Support forums.  I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
    Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account?  If so what does the message state about the failed job?
    Thank you.  
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • 'You Are Not Using The Correct Type of Phone Cord' Error

    Having a issue with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it  received a send error.  I ran fax test and it came back with "You are not using the correct type of phone cord".  Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok.  Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call out and receive calls on the phone connect to the Officejet.  My assumption is that since I can use the phone without issue there is nothing wrong with the phone line.  Any ideas?
    This question was solved.
    View Solution.

    I was having the same problem.  I'm using a the 2 wire phone cord provided with the printer and still getting this error.  Turns out that it related to have a phone extension plugged into the printer.  If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes.   I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error. 
    Run the test without a telephone plugged into the printer's extension jack and you should be fine.
    Worked for me!

  • When SC is partially rejected my manager no workitems are not going to user

    Hi Gurus,
    Below is our requirement:
    Requester (User) creates a SC of multiple line items. Shopping cart is rejected by the manager for a particular line items and rest of the line items was approved, for the rejected line items workitems are not going to requestoru2019s inbox and also e-mail is not triggered to requistioner.(Informing that the SC is partially approved)
    Help us how to implement the above functionality? We have figured out a BADI- BBP_WFL_SECUR_BADI will this BADI suit to our functionality.
    IF then throw some input on this. Or please suggest any OSS note related to this functionality.
    Regards
    Paul

    Hi Daniel,
    Thanks for the quick response.
    WF we used is WS14000133, Last approver is Manager further no approvers.
    For Manger they havenu2019t set (BBP_WFL_SECURITY) any value.
    Regards
    Paul

  • Mails are not going

    Hi Experts,
    I have developed a RFC to approved leave, this RFC will send mail to required recipients. After executing the RFC, when we check into the TCODE: SCOTT mails are sending properly. While the same RFC calling from .NET mails are not going.
    Please let me know any kind of configuration required in .NET or Share point.
    Please do the needful.

    Hi,
    Refer below links.
    Mails are in "Waiting" status in SCOT
    Mails not send in SOST
    Regards
    Durga

  • Mails are not going from apex application

    Hi,
    Mails are not going from my apex application. I had done the instance settings by logged in as admin. SMTP port is also connecting. Please help me to solve the issue.

    Hi,
    Mail queue is vacant. I think the problem is with the process. No process or validations are working. Actually, I have copied this application from another schema. Is there is need to set anything?..I had regenerated all the tables,functions,triggers in my schema .Processes and validations are completely inactive

  • My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?

    My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?  Anyone else having these issues?

    There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
    If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

  • Messages are not going through in my Ipad. I have upgraded to ios5

    My messages are not going through in my ipad. Recently I upgraded to OS to ios5. It says not delivered.

    Try calling *228 and choose option 1 to reset the 0's and 1's on the device.
    Is there a setting on her phone that she may have triggered in her contact for you by accident to block your texts

Maybe you are looking for