Uploading Images - Not Working?

My company updated to the Dreamweaver CC version and I’m having trouble getting the images to upload. The text and hyperlinks come through, but no new photos. We are using Dell PCs, Windows 7, and a 64-bit OS.
Examples:
http://www.pookandpook.com/categories/moderndesign.php (should be the fourth photo down in the second column - Italian Lucite and Leather Living Room Suite $2,460)
http://www.pookandpook.com/categories/jewelry.php (Half way down below the green jade brooch – photo for Diamond 14K White Gold Ring $5,904)
I’m not getting an option to “Check Out” the pages like I used to with the old version of Dreamweaver we were using. The text is there, but it is grayed out and not "clickable." When I select “Get”, it runs through some things, but nothing opens. When I double-click it finally opens. But when I save, nothing is saving to the local view.
I’m just totally confused that the text is coming up, but not photos. Any thoughts on what I am doing wrong? I don’t know much about Dreamweaver… I just basically add photos, text, and links to existing pages.
Someone told me my image folder may be located in the wrong place, but I don't know where the right place is?

Something isn't quite right with the image paths on those few images. When I view the page most work and point to ../pookSite. On the ones that are not working they are showing a path 4 levels deeper ../../../../ . If you update those paths on the page the problem should be resolved.

Similar Messages

Ovi Social uploading images not working

Hello,
I am signed into FB and Twitter on Ovi Socialand can read updates. I am unable to post updates. It just shows updating status and a moving bar.
As well, when i go to images and try to share them, it says uploading started, but it never uploads. there is no error.
rebooting makes no difference.
suggestions?
thanks
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

The certification system was an effective way of ensuring that virus's and other nastys never made it into official apps,
However it's not a certificate issue in the swype case,
Rather
Swype 2 was released as a beta through betalabs,
it was intended to follow up with a prime release and further development, but this plan was shelved after the burning platform memo and Nokia killing Symbyan, with swype going on to develop for android
Late november 2012 (around a year after release) the original beta stopped working because like most beta's it contained a drop dead date, normally wouldn't have been an issue becasue it would have been superceded by a prime release or another beta,
Swype were good enough to release the same beta with a new drop dead date,but for some reason rather than choosing 2099 or some date infinatly in the future, they chose dec 31 2013
There's a thread on dailymobile that details the issue and a hack fix that resolved the issue
Today there is a discussion on all about symbyan that links to this thread and the fix, as well as another possible fix,
unfortunatly both fixes require rooted phones and cannot be discussed further here
The oficial options of gettng this working again involve petitioning the developer, worked last time, but can't see it this, especially now that beta labs itself is all but defunct, site http://forum.swype.com/
You can also try setting the date on your handset to 2013 and see if that helps

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

File upload is not working

Hi
The file upload (any kind static/image etc) is not working.
It is giving error "No Data found". This happens only on certain PCs, on other PCs, it works fine.
Have any one experience such issue ? I am not sure how to trouble shoot this, as there are no errors in Apache logs and no record created in wwv_flow_file_objects$.
TIA
DineshS

How does your PL/SQL for the saving of uploaded files looks like? Where does this error happen? Does your process have an error message?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Uploaded image not shown

hello experts,
I have been done a web java application in struts. Its working fine in my pc, where i have netbeans 6.0 IDE. But when i deployed the war file at client pc, where jdk1.5 and tomcat 5.5.9 are installed, its not showing newly uploaded image but it shows all the images which were present while creating war file from my pc. But the image is uploaded. I upload the images into c:\rh\web\photo and c:\rh\build\web\photo ( unless i place here, i can't able see the newly uploaded image without stopping and running the application). I feel the only difference between client Pc and my Pc is, I run my application using netbeans whereas client pc doesn't have netbeans(rest all it has), through tomcat it runs there.
Any help will be greatly appreciated.
Thanks,
SRI.

You know that HTML runs at the client side?
You know that file system paths are not the same as URL's?
You know that file system paths points to the file system of the local machine?
If you have for example a <img src="c:/foo/bar.gif" /> in your HTML, which is been sent from the server to the client side, the web browser will try to search for "c:/foo/bar.gif" in the local file system. This is obviously not going to work when the image is actually located at the server's file system.
You need to replace file system paths by URL's, so that the client can retrieve the image from the server. When the image is not available in public domain, then create a servlet which accesses the server's file system and sends the desired image to the response. Finally let the URL of the image point to that servlet, along with some unique ID or filename. You may find this example useful: [http://balusc.blogspot.com/2007/04/imageservlet.html].

Tab image not works in 3.2.0

dear firends hi !
I edited tab with image attribute as myimage.gif (without prefix)
but it not works
(I uploaded an image myimage.gif in shared components)
any iadea?
regrads
siyavuş
Edited by: sak on Feb 20, 2010 1:54 AM

Hello Art,
I am sorry for my late response. I have been knocked out by the flu ...
You are writing about ECC 6.0. Thus you are using an integrated ITS 7.00 that uses mostly the same sources for HTML Business and Javascript for both the IE and the Mozilla Firefox. I was asking about the ITS because there could be some kind of issue in older versions (ITS 6.20 or ITS 6.40). But we worked out a solution for popups in ITS 7.00. So I wonder about your problems. More than that when you write that in IE the popups come up just fine.
I am working really often with Firefox (on Windows, Linux and MacOS X) but can not reproduce the issue. The popups come up fine in any case.
Are the popup blockers disabled?
What about additional software (anti-phishing, anti virus ...)?
Please open the Javascript Console (in menu Extras) before opening a popup. You should try to open the System Status in "Menu/System/Status ...". What error messages come up when the popup should come up?
Please open System/Status ... (in IE) and look for the Component Information. What is listed here (support package, kernel version)?
When you look at the HTML document's source code ([Ctrl]- right click on dynpro area, select "Current Frame"/"View source code of frame" (or similar)), do you see the lines
<iframe class="WebguiPopupWindow"
at the end of the document?
For Mozilla Firefox there is an extension called "Live HTTP Headers" that can help to evaluate the HTTP communication between browser and server. With this plugin we can check if the server returns with an error.
With best regards,
TJ
Message was edited by:
Thorsten Domsalla

Rollovers and swap images not working

since i've upgraded to Dreamweaver CS3 i've not been able to create rollovers.. i need to now
is there a bug? a patch that i need? what is going on? I need help please - been able to make do with flash buttons & text until this job.
Running Mac OS10 - if it helps.. these pages were originally designed in go-live and redesigned since - / i wonder if i'm holding my tongue in the correct position. be gentle with your answers - i'm a graphic designer not a web guru

here is the code to three of the rollovers.. it's tabs
i even thought that if i went ahead and uploaded it might work online.. no such luck
<td height="38" colspan="2" align="center" valign="middle"><spacer type="block" width="1" height="379">
                  <spacer type="block" width="1" height="1">
                  <a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home','','images/tabs/rimtymehomeover.jpg',1)"><img src="images/tabs/rimtymehome.jpg" alt="Home Page" name="home" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="malone.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('aboutus','','images/tabs/rimtyme_about_over.jpg',1)"><img src="images/tabs/rimtyme_about.jpg" alt="About us page" name="aboutus" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="storephotos.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('storegallery','','images/tabs/rimtyme_storephotos.jpg',1)"><im g src="images/tabs/rimtyme_storephotos_over.jpg" alt="Click here for images of each of our locations!" name="storegallery" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="credit.html"><img src="images/tabs/rimtyme_getstarted.jpg" alt="GETTING STARTED" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">

Captcha image not working

Here is the link to my contact form page: http://www.healthquestpt.com/hpc/contact.html The captcha image isnt working and the form doesnt work. This image is in the directory "scripts/images"
These are the options I've tried so far:
<?php $random = rand(0,3); ?>
<img src="images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="/scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
I've tried moving the images from the "scripts/images" to the "images" file in the main directory.
I've tried moving the contact.html into the "scripts" file
I've tried moving the formmailer.php into the main directory.
None of the above work so right now I have the contact.html in the main directory, the formmailer.php & images associated with formmailer in the "scripts" file and another set of the images in the "images" file in the main directory.
here is the link to the "scripts" folder: http://www.healthquestpt.com/hpc/scripts/
Please help.

Ok den I did it but I only uploaded the index.html and the contact.html pages
heres the formmail.php code:
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="http://domain.com/,http://www.domain.com/,http://subdomain.domain.com/";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Home Physician Care Inquiry";
$reply_to_field[0]="Email";
$reply_to_name[0]="Name";
$required_fields[0]="Name,Phone,Email,Comments";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="The following inquiry has been made:";
$mail_fields[0]="Name,Address,City,State,Zip,Phone,Email,Comments";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="no";
$copy_format[0]="vert_table";
$copy_fields[0]="Name,Comments";
$copy_attachment_fields[0]="";
$copy_subject[0]="Subject of Copy Email";
$copy_intro[0]="Thanks for your inquiry, the following message has been delivered.";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="thanks.html";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Please use your browser's back button to return to the form and complete the required fields.";
$thanks_page_title[0]="Message Sent";
$thanks_page_text[0]="Thank you for your inquiry";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Comments,Name";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Comments";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="";
$character_scan[1]="";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a -z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
   $user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
   $user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$array_value=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
   if($count > 1){$value.=", ";}
   $value.=$part_value;
   $count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
   $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars(nl2br($cur_value));
   else
    $cur_value=nl2br($cur_value);
   $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
   $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
   $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars(nl2br($cur_value));
   else
    $cur_value=nl2br($cur_value);
   $message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
   $message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars($cur_value);
   else
    $cur_value=$cur_value;
   $message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
   $message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
   $message=buildHorzTable($fields, $intro, $to, $send_ip);
else
   $message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
   $ref_check=preg_split('/,/',$referring_domains);
   $ref_run=sizeof($ref_check);
   $referer=$_SERVER['HTTP_REFERER'];
   $domain_chk="no";
   for($i=0;$i<$ref_run;$i++)
    $cur_domain=$ref_check[$i];
    if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
   $domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
       $error_message="";
if($debug==1)
   $error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
   $req_check=preg_split('/,/',$text_fields);
   $req_run=sizeof($req_check);
   for($i=0;$i<$req_run;$i++)
    $cur_field_name=$req_check[$i];
    $cur_field=$_POST[$cur_field_name];
    if($cur_field=="")
     $error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
   $email_check=preg_split('/,/',$email_fields);
   $email_run=sizeof($email_check);
   for($i=0;$i<$email_run;$i++)
    $cur_email_name=$email_check[$i];
    $cur_email=$_POST[$cur_email_name];
    if($cur_email=="" || !eregi($regex, $cur_email))
     $error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
   $fileatt=$_FILES[$att_check[$i]]['tmp_name'];
   $fileatt_name=$_FILES[$att_check[$i]]['name'];
   $fileatt_type=$_FILES[$att_check[$i]]['type'];
   if (is_uploaded_file($fileatt))
    $file=fopen($fileatt,'rb');
    $data=fread($file,filesize($fileatt));
    fclose($file);
    $data=chunk_split(base64_encode($data));
    $att_message.="--{$border}\n";
    $att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
    $att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
    $att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
   $content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
   $content_type="Content-type: text/html; charset=".$charset."\r\n";
else
   $content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
   $cur_field_name=$field_check[$i];
   $cur_field=$_POST[$cur_field_name];
   if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
    $spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
   $time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
   $captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
   $cur_field_name=$field_check[$i];
   $cur_field=$_POST[$cur_field_name];
   preg_match_all("/http:/", $cur_field, $matches);
   if(count($matches[0]) > $max_urls[$config])
    $max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
    $security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
   $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
   $reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
   $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
   $reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
   // build appropriate message format for recipient
   $content_type=contentType($charset[$config], $mail_type[$config]);
   $message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
   // build header data for recipient message
   //$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
   $extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
   if($cc_tomail[$config]!="")
    $extra.="Cc: ".$cc_tomail[$config]."\r\n";
   if($bcc_tomail[$config]!="")
    $extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
   if($mail_priority[$config]!="")
    $extra.="X-Priority: ".$mail_priority[$config]."\r\n";
   // get attachments if necessary
   if($attachment_fields[$config]!="")
    $semi_rand=md5(time());
    $border="==Multipart_Boundary_x{$semi_rand}x";
    $extra.="MIME-Version: 1.0\r\n";
    $extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
    $message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
   else
    $extra.="MIME-Version: 1.0\r\n".$content_type;
   // send recipient email
   if($debug==1)
    if($set_flag == 1)
     $debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
    else
     $debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
   else if($debug==0)
    if($set_flag == 1)
     $subject = $flag_spam[$config]." ".$subject[$config];
    else
     $subject = $subject[$config];
    mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
   // autoresponse email if necessary
   if($send_copy[$config]=="yes")
    // build appropriate message format for autoresponse
    $content_type=contentType($charset[$config], $copy_format[$config]);
    $message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
    // build header data for autoresponse
    $copy_tomail=$_POST[$copy_tomail_field[$config]];
    $copy_extra="From: ".$copy_from[$config]."\r\n";
    // get autoresponse attachments if necessary
    if($copy_attachment_fields[$config]!="")
     $semi_rand=md5(time());
     $border="==Multipart_Boundary_x{$semi_rand}x";
     $copy_extra.="MIME-Version: 1.0\r\n";
     $copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
     $message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
    else
     $copy_extra.="MIME-Version: 1.0\r\n".$content_type;
    // send autoresponse email
    if($debug==1)
     if($set_flag == 1)
      $debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
     else
      $debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
    else if($debug==0)
     $send_copy = 1;
     if($copy_tomail=="" || !eregi($regex,$copy_tomail))
      $send_copy = 0;
     if($send_copy == 1)
      if($set_flag == 1)
       $copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
      else
       $copy_subject = $copy_subject[$config];
      mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
   // showing thanks pages from a successful submission
   if($thanks_page[$config]=="")
    echo "<h3>".$thanks_page_title[$config]."</h3>\n";
    echo "<p>".$thanks_page_text[$config]."</p>\n";
    if(strlen($debug_text) > 0)
     echo "<p><b><i>".$debug_text."</i></b></p>\n";
   else
    header("Location: ".$thanks_page[$config]);
else
   // entering error page options from missing required fields
   if($error_page[$config]=="")
    echo "<h3>".$error_page_title[$config]."</h3>\n";
    echo "<ul>\n";
    echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_messa ge.$max_url_message;
    echo "</ul>\n";
    echo "<p>".$error_page_text[$config]."</p>\n";
   else
    header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?>

Agent (10.2.0.5.0) on OEL is running, upload is not working

Hello,
I am installing boot/stage server for provisioning on Oracle Enterprise Linux, so I need to install Management Agent.
Agent is installed and running. But upload XML files is not working (last successful heartbeat to OMS: unknown).
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 3141
Parent Process ID : 3122
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-10 11:00:13
Started by user : oracle
Last Reload : 2009-12-10 11:00:13
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 123
Size of XML files pending upload(MB) : 3.37
Available disk space on upload filesystem : 71.78%
Last attempted heartbeat to OMS : 2009-12-10 11:44:05
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
When issuing emctl upload agent receiving error:
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
When trying to secure, everything is fine:
Enter Agent Registration Password Agent successfully restarted... Done. Securing agent... Successful.
When trying to unsecure then getting:
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Checking Agent for HTTP... Done.
Agent successfully stopped... Done.
Unsecuring agent... Started.
OMS Upload URL - http://xxx.xx.xx:4889/em/upload/ is locked or unavailable.
Unsecuring Agent... Failed.
Agent successfully restarted... Done.
when trying to connect with telnet:
Trying 192.168.8.59...
Connected to xxx.xx.xx (192.168.8.59).
Escape character is '^]'.
then issued
^]
and received:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>501 Method Not Implemented</TITLE>
</HEAD><BODY>
<H1>Method Not Implemented</H1>
^] to /index.html not supported.<P>
Invalid method in request ^]<P>
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at xxx.xx.xx Port 4889</ADDRESS>
</BODY></HTML>
Connection closed by foreign host.
And sample of emagent.trc imho regarding this situation:
2009-12-10 11:00:13,661 Thread-1173184 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
Help needed! What should I check? I am very new to Linux, maybe I missed something?
Waiting for any response,
Best regards,
Nikolajus
Edited by: Nikolajus on Dec 10, 2009 6:48 AM

Thanks for answering, Rob
My activity was:
On OMS:
[oracle@gc bin]$ ./emctl secure unlock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is unlocked. HTTP ports too can be used to access console.
Agent Upload is unlocked. Unsecure Agents may upload over HTTP.
Then on boot_test:
./emctl unsecure agent (all completed without errors)
Then:
./emctl secure agent
Securing agent... Successful.
Then back to OMS:
[oracle@gc bin]$ ./emctl secure lock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is locked. Access the console over HTTPS ports.
Agent Upload is locked. Agents must be secure and upload over HTTPS port.
Then on boot_test:
[oracle@boot_test bin]$ ./emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
[oracle@boot_test bin]$ ./emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ..... started.
[oracle@boot_test bin]$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@boot_test bin]$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
And the status is:
[oracle@boot_test bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 29610
Parent Process ID : 29594
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-11 09:42:54
Started by user : oracle
Last Reload : 2009-12-11 09:42:54
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 78
Size of XML files pending upload(MB) : 3.84
Available disk space on upload filesystem : 71.95%
Last attempted heartbeat to OMS : 2009-12-11 09:51:01
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
So, it seems nothing changed. Am I missing something? Waiting for any help!
Best regards,
Nikolajus

Google Images not working in Safari on Iphone

Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, Sweden

Hi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo

Flash uploader is not working properly in safari 5.1

Hi All,
I'm using safari 5.1 in windows, i had created a flash uploader and when tried to run in safari 5.1 the functionallity below the flash uploader script is not working,
i had tried with safari 3.0 it's working fine. I'm facing the problem only safari 5.1

Hey, Anybody have solution or Fixed it by Safari Team support ???

Export to Excel and File Upload is not working on ipad/IPhone

Hi
We have a site in ASP.Net 2008 which is running on browsers and devices. There is an option to export to excel and file uploadd, It is working in the browsers but not working in Devices like IPad and Iphone. we are creating xml file when export to excel. We have tried it on IPad1,IPad3 and iphone3.
can you please elaborate the causes of these issues? Pleas support to fix the issues.
Regards,
Manoj

How does your PL/SQL for the saving of uploaded files looks like? Where does this error happen? Does your process have an error message?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Why is code to get center of image not working?

Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
     rawImage = imageData.image[imgNum].imageURL;
     lastImageIndex = imageData.*.length() - 1;
     imageLoader = new Loader;
     imageHolder = new Sprite;
     imageLoader.load(new URLRequest(rawImage));
     imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
     imageLoader.y -= imageLoader.height/2;
     imageHolder.x = 640; //this is the center of the stage
     imageHolder.y = 100;
     imageHolder.addChild(imageLoader);
     masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.

the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.

Anychart save as pdf/image not working

A while ago I posed this question when the right click, save as stopped working on my APEX charts
Apex charts - right click, save as image (not responding)
The problem resolved when anychart.com was back up, but the problem is occurring again and I wonder if they've moved their php files. Not even in Hilary's sample app is working. We think this happened within the last month.
After choosing save as image and a location, the "saving" just keeps spinning.
Most anychart google results at the moment seem to revert to the same landing page, and webcached copies refer to locations that no longer exist.
I wonder with post anychart7 cleanup, have they moved the supporting php files? For instance, this location no longer exists
http://www.anychart.com/products/anychart/saveas/pdf/PDFSaver.php
A workaround is to use a local copy of the php file with custom XML
<settings>
<pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
But I only have the PDFSaver, not the AnyChartPNGSaver.php
This file no longer exists either:
http://anychart.com/products/anychart/docs/users-guide/export_image_scripts/php.zip
Does anyone know where I can source the png saver php, or suggest another workaround? Or have any other information on this issue.
An email to [email protected] back in 2013 got no reply.
APEX 4.2.0
Scott.

Hi Scott,
So, if i understand properly, making this change
<settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
Thanks
Sunil Bhatia

Swap Image not working Except in IE

I am working on a class project, and we've just learned how
to do "swap image" on rollover. It's working beautifully when in
IE, but in Firefox it's not working at all and in Opera it's
working strangely (only when on the "edges" of the flash text not
when rolling over the flash text) Any ideas as to the problem? The
flash text rollover works (changes colors), but the "bubbles" are
supposed to swap images. BTW, I thought it might be a setting in my
browser disabling something, but the swap image on classmates'
sites show up fine.
http://198.86.244.3/drsimpson/WEB140/drsimpsongallery/
Thanks

I can't see what is the problem. :-(
Try replacing your flash buttons with plain gif images, it
works the same way and you will have much less code on your page. I
don't think the problem is there but you can always try.

Uploading Images - Not Working?

Similar Messages

Maybe you are looking for