Uploading iMovie clips to server?

Hi,
To make a very long story short, I am in the process of uploading files from one computer with a very corrupted hard drive to my powerbook. I am able to move documents and photos fine. However, when I try to bring my movies over, it doesn't upload them to the server.
I don't have an ftp application on my PowerMac G4 and do to hardware issues, I am unable to download an ftp program such as Fetch and decompress it (broken pipe error).
So, I am using a browser based ftp in Internet Explorer. I can get into my server fine, but when I try to move Quicktime movies, they just open in the browser and start playing. When I upload via my webshell at my server, the quicktime movie does go, but not all the clips and files that it needs to run. I have tried exporting the iMovie and this PowerMacG4 can't seem to do that anymore.
Any thoughts on how to upload iMovie clips, files, movies via ftp in a browser?
Thanks,
Maina'

//I know! Sorry, it get's crazy trying to explain this problem!//
Hi Karsten,
Thanks for your suggestion, however, I have already done this. This PowerMac G4 seems to be almost beyond hope, I am just trying to grab my photos and some files that I haven't backed up in a few months.
Things I have already done...
Internal CD/DVD drive not working, so can't burn any data that way
Hooked up external firewire drive to it and didn't recognize the drive.
Have taken my Powerbook and put the G4 into Target Mode and at first the Hard drive showed up on the Powerbook, but not long enough for me to scan through it and grab data. Tried that a few times and now it doesn't recognize it at all.
Have put the Laptop in Target Mode and tried to use the G4 as the primary drive, tht didn't work that way either, it didn't recognize the drive.
Used Disk Utility to verify and repair the drive. It couldn't repair the drive,
Tried mounting the drive in Disk Utility and that didn't work.
I also tried all the firewire ports on my G4, including a 9 pin to 6 pin setup. None of them allowed me to see the G4 on my laptop, while in target mode.
I have a USB to USB cable, and tried that also, no luck
I have used an ethernet cable and tried to network then, no luck. My G4 mounts my PB, but not the other way around.
Nothing seems to be recognizing my drive on the G4. I always get an error message.
So, I opted to upload and download, my last resort. Can't use iDisk since my PowerMac G4 is OS 10.2.8, you need 10.3 and later. I would buy the OS and upload, but the drive won't read it.
I have some web space and was using ftp and that was moving my documents and photos, now I just need to somehow move the movies.
Have I confused you move in this longer post?
I appreciate your help.

Similar Messages

I wanna find out how can i upload imovie in instagram

how can i upload imovie clip in instragram

Hey there!
It sounds like you want to upload a project to Instagram that you have in iMovie. You can export the video as a quicktime file, and then upload that file to Instagram. Use this article to export the video to a file:
Export a QuickTime file
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
Create a QuickTime file
Select a movie, trailer, or clip in the browser.
Click the Share button in the toolbar, and then click File.
In the dialog that appears, do any of the following:
To set the title of the shared movie: Click the name at the top, and type a new name.
To set the description of the shared movie: Click in the Description field, and type new text.
To set tags for the shared movie: Click in the Tags field, and type tag names separated by commas.
To set the size of the shared movie: Choose an option from the Size pop-up menu.
To find out which devices will play the movie: Move the pointer over the Compatibility icon.
To add your movie to the Theater: Select the Add to Theater checkbox.
Click Next.
In the dialog that appears, type a name in the Save As field, or leave the default name, which is the name of the movie, trailer, or clip.
Navigate to the location where you want to save the file, and click Save.An activity indicator appears on the right side of the toolbar. Click the activity indicator to see details. The indicator disappears when the operation has finished.After the share process is complete, the movie opens in QuickTime Player. A “Share Successful” notification also appears.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

Post in the iMovie forum.

How do I import imovie clips from my iphone 6 to my mac running yosemite?

My iphone 6 screen is completely smashed leaving me unable to use the touchscreen. I know that you can just send the imovie project to itunes but I can't use my screen to do it. Also, when I go into imovie from my computer and click import and then go to my phone it says there are no clips. Is there a way I can get those imovie clips to my computer through another means? Thanks

God Bless You,
Its very simple, you can download pixelpipe to upload it straight from the phone, or just connect your iphone to your computer (if you have a mac, then go to iphoto, and the video should be there). I'm not sure how you would do it on a pc.

Can anyone help find lost iMovie clips please?

Hello,
I've lost several iMovie clips from my iMovie, The Library list on the left on the screen still displays the titles, but when I click on them the window displays the title with "empty" next to it.
I've tried restoring from my Time Machine back-up external disk but the results remain the same.
I've tried looking at my iCloud account and can't see any movies there at all, including in iCloud Drive.
I upgraded to iMovie 10.0.6 and it seems to have happened since then.
Unfortunately the missing movies have been deleted from my camera so I can't reload them.
I have uploaded some movie clips recently and they've worked fine.
Is there any other way I might be able to recover these missing files?

I've now recovered the missing files, however I have a further problem which I'm hoping someone can help with.
I have just recovered some video clips which I had accidentally deleted. For some reason the recovered files couldn't be read by iMovie but when I tried iPhoto they did transfer into that. It took hours though.
Now the movies are there they are showing as "clip" type with a unique number allocated to each clip.
I want to bring them into iMovie so that I can include them with iMovie clips which are already there.
I can't find a way to either send them to iMovie or import them into iMovie from iPhoto.
If I want to use clips from both iMovie and iPhoto am I able to import them so I can compile a movie?

MacBook won't let me trash Quicktime iMovie clips?? Whatup?

I am trying to trash a Quicktime imovie clip. When I drag the clip in the trash, I am asked to give my password. Then I get the message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
Have any of you dealt with this? Any tips?
Thanks,
Eddie

Thank you so much. You rock.
I'm going through the process of trying to clean up my hard drive. My MacBook has been serving me well for 3 years now and I'm trying to avoid the fatigue that my past Macs have suffered from. Let me know if you have any maintenance tips.
Eddie

MacBook won't let me throw away Quicktime imovie clips??

I am trying to trash a Quicktime imovie clip. When I drag the clip in the trash, I am asked to give my password. Then I get the message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
Have any of you dealt with this? Any tips?
Thanks,
Eddie

Thank you so much. You rock.
I'm going through the process of trying to clean up my hard drive. My MacBook has been serving me well for 3 years now and I'm trying to avoid the fatigue that my past Macs have suffered from. Let me know if you have any maintenance tips.
Eddie

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

How to Upload Smartforms from Application Server

Hi Guys,
I have to upload the SMARTFORMS in to the System.That can be done as follows:
1- Tcode - Smartforms
2- Utilities -> Upload form
3- Give form Name
4- Give path of Form on presentation server and upload.
But I have to give the path of Form from the Application Server. As i have all the forms to be uploaed in New system on the Application Server.
I will be writing the program to program to read XML file(smartform) from application server to internal table and then upload it in the System.
Please let me know if it is possible to upload Smartforms from Application Server?
Regards
Sandeep

Vinod,
Thanks for the reply.
But Actually I want to Automate this process of Uploading the Smartforms.
So I want to directly upload it from Application server.
As it is not possible to upload the Smartforms from Presentation Server Automatically.
In this human Intervention will be required.

How to upload logo from application server

Hi all,
Plz show me the way how to upload logo from application server into sap script.
What is NGT.
Thanks in advance
Venkat

Hi
You have to import your logo in SAP by SE78 before using it in a SAPSCRIPT.
So have you done it?
If yes, it depends on how you have imported the logo:
- As std text:
INCLUDE <LOGO TEXT> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
- As graphic:
BITMAP <LOGO GRAPHIC> OBJECT GRAPHICS ID BMAP TYPE BCOL
Max

How to upload file from Application Server?

Dear Friends,
How to upload file from Application Server?
Plz. with example...
Regards,
Dharmesh

hi,
check the code for upload from application server.
tables: kna1.
types: begin of s_file,
         customer type kna1-kunnr,
         country type kna1-land1,
         name     type kna1-name1,
         region   type kna1-regio,
       end of s_file.
*--Internal tables
data: it_file type s_file occurs 0 with header line.
*-- Selection screen
selection-screen: begin of block b1 with frame title text-001.
parameter: p_file type rlgrap-filename default 'C:/customer.txt'
obligatory.
selection-screen: end of block b1.
*-- At selection screen
at selection-screen on value-request for p_file.
perform file_help using p_file.
*-- Process File
start-of-selection.
perform upload_file using p_file.
*-- write File data to o/p
end-of-selection.
perform write_data.
*&      Form file_help
form file_help using    p_p_file.
data: l_filepath type ibipparms-path.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   importing
     file_name           = l_filepath
p_p_file = l_filepath.
endform.                    " file_help
*&      Form upload_file
form upload_file using    p_p_file.
call function 'WS_UPLOAD'
   exporting
     filename                      = p_p_file
     filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
    tables
      data_tab                      = it_file
   exceptions
     conversion_error              = 1
     file_open_error               = 2
     file_read_error               = 3
     invalid_type                  = 4
     no_batch                      = 5
     unknown_error                 = 6
     invalid_table_width           = 7
     gui_refuse_filetransfer       = 8
     customer_error                = 9
     no_authority                  = 10
     others                        = 11
if sy-subrc <> 0.
    message i001.
endif.
endform.                    " upload_file
*&      Form write_data
form write_data .
loop at it_file.
    write:/ it_file-customer, it_file-country, it_file-name,
            it_file-region.
endloop.
endform.
regards,
keerthi.

How do I create a slide where users can upload a file to server or email a file?

Could anyone guide me in how I could go about creating a slide where users can either email a file or upload it to my server?
Any help would be greatly appriciated...
Steve

Hello,
Welcome to Adobe Forums.
I am not sure how you can Upload a file, you might need a Javascript.
You can create a slide and a button of that slide can call the default Email client (MS Outlook, Outlook Express....)
1) On you Slide insert a button (Insert -> Standard Object -> Button
2) Double Click on that button and select "Open URL or file" for On Success (Under Properties Inspector)
3) Write "mailto:[email protected]" in the URL box (For Example : [email protected])
4) Publish the result, when you click on the button, it will call the default mail client.
Screenshot :
Note : This might not work if you have a Network Security which do not allow calling Mail Client through a Script (Clicking of Button calls the script)
Thanks,
Vikram

Uploading a file to server using servlet (Without using Jakarta Commons)

Hi,
I was trying to upload a file to server using servlet, but i need to do that without the help of anyother API packages like Jakarta Commons Upload. If any class for retrieval is necessary, how can i write my own code to upload from client machine?.
From
Velu

<p>Why put such a restriction on the solution? Whats wrong about using that library?
The uploading bit is easy - you put a <input type="file"> component on the form, and set it to be method="post" and enctype="multipart/form-data"
Reading the input stream at the other end - thats harder - which is why they wrote a library for it. </p>
why i gave the restriction is that, i have a question that <code>'can't we implement the same upload'</code>
I was with the view that the same can be implemented by our own code right?

Tcode to upload file to SRM Server.

Hi,
We have a requirement to upload file into application server and then read the data into internal table.
In ECC we can use the tcode CG3Y/CG3Z but this Tcode is not available in SRM Server,
Can anyone suggest corresponding tcode in SRM server to upload data into application server.
Thanks in advance,
Jerin

Jerin,
Please go throgh the below link which will help for upload the contracts.
http://help.sap.com/saphelp_srm40/helpdata/en/e5/2c85403e1b6e1de10000000a1550b0/content.htm
Best Regards,
NMK

Using Imovie clip files on a pc

Hi
I used Imovie to log and capture from dvcam then i copied everything from the clips folder to dvd. the problem is my doesnt recognise the format.
Is there anyway i can use these on my pc?
I intend to use premier pro1.5 and i dont mind re-rendering them to a PC friendly format so any help would be appreicated.
Thanks

Your iMovie clips are probably in DV Stream format, which is basically raw data straight from the camcorder. Here's some info:
http://en.wikipedia.org/wiki/DV#Applicationsoftwaresupport
You should probably go back into iMovie and export them properly, either to DVD or to QuickTime. If possible, choose a pretty high bit rate so you don't lose quality.
AlBook 15

Uploading iMovie clips to server?

Similar Messages

Maybe you are looking for