Uploading master data with business objets and LSMW

All,
I am trying to uploas legacy data with LSMW and with Business object BUS52** for security classes. This works with idoc format, I have no prior knowledge how this works, but I figured it out a bit. I am to the point now that my idocs are created and posted (according to the system). Except when I would like to see the security class created with FWZZ, there is no data in it.
Any help what am I doing wrong?
kr,
Stef

Hi,
I have successfully used lsmw with bapi before for securities class master data. Business ibject type is BUS1076. If unfamiliar with lsmw (with bapi); I think internet search may bring up couple docs on that.
Manish

Similar Messages

Infotype 0008 master data with no salary and no wage types.

I am an abapper so I apologise whole heartedly in advance for what may be a silly question.
I want to use infotype 0008 only to hold master data values. The only fields I want filled are:
Pay Scale Type,
Pay Scale Area,
Pay Scale Group,
Pay Scale Level,
Capacity utilization level.
Is it possible to configure infotype 0008 just to enter these values and nothing else. I don't any values in Annual Salary, Wage types, etc.

Dear Gemini,
You can hide some of the fields if you donu2019t want to display or you can make them Output fields (table name T588M, and select the module pool, MP000800).
Thanks
Haji

Lsmw to upload master data

Hi,
if we want to upload master data for example customer master data,vendor master data and material master data.
then which one is the best method lsmw or BDC ?
if we use lsmw then we need to use recording or direct input program.
what will be the volume of data when we used lsmw for master data.
Thanks in advance.
Thanks,
Jigar

Hi,
The basis for deciding which method to upload the master data can be considered on the following:
1. Customer Requirement.
2. Volume of the data.
3. How much effort is required.
4. Whether error handling is to be done explicitly or automatically.
The most preference order as follows:
1. LSMW
Latest tool and less effort/coding is required. It covers all the methods.
- by standard Batch/ Direct input,
- by Batch Input Recording,
- by Buisness Object Method , and
- IDoc ( Intermidiate Document) .
2. BAPI
BAPI is an abbreviation used for Business Application Programming Interface. These are interfaces within the business framework to link SAP components to one another and SAP components with third-party components.
The SAP Business Objects are an essential part of the Business Framework and the prerequisites for interoperability. SAP Business Objects cover a broad range of R/3 business data and processes and can be accessed using BAPIs. The SAP Business Objects and their BAPIs thus provide an object-oriented view of R/3 business functionality.
3. BDC
It can be done in two ways:
a) Session - it handles error implicitly .
Transaction: error handling is explicit.
b) Call transaction is 6 times faster than session .
c) Session can handle multiple transactions while, call transaction can handle one transaction at a time.
d) Session method is used to handle basically very lage amount of data .
What will be the volume of data when we used lsmw for master data.
It depends on the company master data volume in their legacy systems. LSMW can handle huge volume data.
Hope this will help.
Regards,
Ferry Lianto

Problems with uploading master data in BI 2004S

Hi all,
I wanna upload master data in FI from R/3 System to BI System. I created its transformation. Then, I migrated it WITH EXPORT option. After that, I created Data Transfer Process (DTP), I didn't change any thing, just "Save and Active". Then I created InfoPackage for it => choose Schedule tab and press Start. Open DTP and choose Execute tab -> press Execute.
1. In the case of successful process (the log showed no errors), How can we check that data is transferred successfully?
2. Case 2: I did all above steps for a data source. But when I opened InfoPackage -> it said "This InfoPackage has been already in Process Chain"... I still continued to execute its DTP but I failed. The log said that the data was duplicated.
What does it mean? And what should I do in this case?
3. Case 3: I have a data souce Account Type with <0ACCT_TYPE_TEXT> (icon dialog). I migrated it but failed. Then, after I refreshed, this datasource moved to the group that had been migrated before (in the end of the tree) but <0ACC_TYPE_TEXT> disappeared.
So, I cannot create DTP or InfoPackage for it to transfer. In this case, Do I have to re-create a DataSource? What should I do?
Thanks in advance.

case 1:
Check there might be duplicate record. as it is a text datasource language may be maintained. U can check in monitor what record is showing error.
case 2:
If u migrate the data source then it is a BI7.0 version.
If u want to recover 3.x datasource then u need to use RSDS .
Then again u can create Data Transaformation and DTP and migrate once again.
then load the data.
Normally if u r working on BI7.0 do all the stuffs(DT, DTP) using 3.X version then do the migration of datasource else if u migrate first and do the transformation then u will have to manual mapping and u may missed and do a lot of mistakes.
Thanks,
Debasish

Upload the master data in abap-hr using Lsmw tool

Hi Friends,
Any one Help me How to Upload the Master data in ABAP-HR using LSMW.
In Recording what need to fill.
If any screenshots are availave please provied me.
Thanks and Regards,
Sai.

http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Try this .....

Upload master data tables from legacy systems with XI on BW

Hi developers,
Can you help me to reconstruct the steps necessary for upload master data, deriving by legacy tables, on BW system using XI?
Thanks in advance

Hi,
see the following link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
Rgs
Antonino

Upload Master Data from R/3 to BW

Hi,
I want to upload master data from R/3 into BW.
Regds
Dayakar Reddy.

Hi
1 activate 0Material from R3 side this datasource corresponds has the extract.struct. BIW_MARA_S correponding to material master data (what you need)
2 install 0Material from business content
3 replicate in BW
4 assign your datasource 0material_attr to the infosource 0material_Attr if flexible or create an infosource with direct update
5 activate transfer rules (if flexible)
6 create update rules from 0material to your infosource (if flexible)
7 create an Infopackage, launch the job and check the monitor to see if the upload works.
Regards

Upload Master Data GL quicker way instead of using FS00?

Hi Guys
I would like some advice regarding uploading Master data into SAP
As part of my training course we are having to upload live data onto SAP and our trainer has suggested using SM35 and to click new recording then typing FS00 in transaction code and then we put our details for one transaction and then the recording should suffice.
I do not want to manually type them all in using FS00 even though it is only 40 GLs as I want to practice LSMW
Also I have been told of a another way by typing in SA38 then RFBISA00. I have tried this however getting error message Message no. BL001
I know this may sound stupid but the Excel file is saved in a text format do I keep the headers and the rows where it says required or not. Or do I just copy the raw data?
Thanks guys
MD

Hello,
To get best answers, you will have to post the question in ABAP Data Transfer Forum.
For LSMW, you may be refer the link [LSMW|http://www.****************/Tutorials/LSMW/LSMWMainPage.htm]
This will provide details step by step document on how to use LSMW.
Regards,
Abhishek

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

ECATT Use for upload master data

Hi
Please Guide me how to use ECATT , when we Upload the Master data in SAP Best Practice ,not in SAP R/3 ( note : for SAP Best Practice system only) through ECATT.
Can anybody have any idea about this
Guide me
Regards
Roobal

ECATT can be used by using transaction code SECATT.
This tool is used for data uploading and regression testing.
You need to prepare a scenario for regression testing.
You should create
1. Test Script
2. Test Data
3. Test Configuration.
If you want to upload master data, LSMW is the best tool.
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards,
Ravi
Edited by: Ravi Sankar Venna on Apr 22, 2009 12:54 PM

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Problem while uploading master data through two files

Hi all,
When i try to upload master data of CUSTOMER with two files , Attribute and Text.
Text gets uploaded perfectly.
for Attribute, the data upload is done and psa i can see the exact data. But when i check the CUSTOMER object, i am not able to find the actually Attributs data. Instead those colmns are filed with 'E'.
Can anybdy please explain me wheret the problem is.
Thanks..

Hi Sun,
First check the data in PSA whether the records are fine or any discrepancy in them. Also check the properties of the COSTUMER object into which you are loading. The properties "type" or the "size" of the object may not be matching with the same in the file.
Check them and try to load once again.
Hope this helps u...
Regards,
Koundinya Karanam.
Edited by: koundinya karanam on Jan 15, 2008 12:05 AM

Delete Master Data - with or without sids

Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thank

Hi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan

Deletion of master data with / without SID

Hi Experts,
Client have requested for master data clean up.
Requirement:
"Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
Steps to be taken:
1. emptied/deleted content of all the cube.
2. delete data from master data
Help required:
What will be impact of deleting master data with SID when DSO data is not deleted.
What if i choose without SID option for deletiing master data
Regards
Suresh Kumar

Hi Suresh,
Deleting master data is one critical job and ned to be very care ful.
First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
If you are deleting the TD and master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
Go thru the below thread, this gives you lot if info on MD deletion.
[Re: SID Tables]

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

Uploading master data with business objets and LSMW

Similar Messages

Maybe you are looking for