Uploading material master from R/3 to CRM problem

Hi Experts,
I am new to the Middleware
I have downloaded the material master from R/3 to CRM but I am not able to see the downloaded products in CRM.
I have checked the queue of R/3 there is no error.
I even checked the queue of CRM there is no error.
When I see in SMW01 the status is green and
BDoc. Error message is showing Mat. for Initial Download: Function table not supported
Can anybody give me suggestions?
I will reward the points

i have checked the filters
i have down the following settings
Request Name     MATERIAL
Table Name       MARA
Field Name       MATNR
Incl/Excl      Inclusive defined set/array
Option           Greater or equal then (>=Low)
Low              a1(r/3 material no.)
even thin i did not get the result
i have the same error that is
"Mat. for Initial Download: Function table not supported"
help me out it is very urgent

Similar Messages

How to replicate material master from R/3 to CRM

Hi guys,
I am trying to replicate material master from R/3 to CRM using BAPI_MATERIAL_SAVEDATA but no changes are getting replicated to CRM.
Any help..??
Thanks,
Sid

Hi find below for the product cat
Steps to create the product category in SRM:
1)       Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2)       Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3)       Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Replication of Customer and Material master from R/3 to CRM

Hi
Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
I went to B09 BB document and all settings are fine.
Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
I went to R3AM1 and checked the status as running or wait for each object.
There are no filters in R3AC1 .
Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2 .
What can i do to resolve this problem.
Please advice.
Thanks,
Vaishnavi

Hello Vaishnavi,
After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
You can run this txn in test mode as well to see the affected tables.
Are you getting any dump on these load ?Check it in txn:ST22.
Hope this helps!
Best Regards,
Shanthala Kudva.

Upload Material Master to non SAP Catalog

Hi Guys,
we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
Are there reports available in the backend (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
Any hints are welcome!
Thx
Dieter

Hi Dieter,
Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
Regards,
Nikhil

Upload Material master with long text using LSMW

Hello,
i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2, purchasing, purchase order text, plant data 1,2.
i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
please help.

ca u clarify how can i do it.
suppos i have longtext "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is 10 RMT. A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire. F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
then what i have to do changes in lsmw.?

Need to upload material master.

Hi experts,
I am periodically required to change values in some fields from MRP 1,2,3 and 4 views. It takes hell of a time as there are many material codes..nearly 500 every month.
My question is is there any other quick input method like creating an excel file for that data and upload it?
I remember in mylast company for uploading material master the consultants provided us with that kind of query/data run.
Regards,
Sam

Dear ,
You need to run BDC in Back ground for uploading Material Master parametrs or new material creation .It can be Batch process.
Or Goto T-code MM17 mass change check tables there, and retreive data one by one from se16, then merge your file. or develop report detailed report for this then download.
Look up the following therads which is self explaintaory :
http://wiki.sdn.sap.com/wiki/display/ABAP/MaterialMasterUpload+Program
http://wiki.sdn.sap.com/wiki/display/Snippets/BDCProgramtoUploadMaterialMasterData+(MM01)
http://www.sap-img.com/abap/upload-material-master-finish-goods.htm
Just discuss with your ABAPer and provide him the Excell sheet with necessary parametrs .
Regards
JH
Edited by: Jiaul Haque on Oct 11, 2010 3:29 PM

Upload material master data

Hi friends,
can u provide prog for upload material master data by using bapi bapi_material_savedata.
i need to pass the following fields .
                MARA-MATNR
           MARA-MBRSH
              MARA-MTART
            MARA-MATKL
             MARA-MEINS
          MAKT-SPRAS
            MAKT-MAKTX
            MVKE-VKORG
          MVKE-VTWEG
                MVKE-MTPOS
             MARA-TRAGR
                      MARC-WERKS
           MARC-EKGRP
               MBEW-BWKEY   and also using dynamic internal table.

Hi siddu,
As a developer you should ask for the code.
Try u r self writing the code.If u struck any where just post the question.
There wil be many threads regrading material master data.
Give ur bapi BAPI_MATERIAL_SAVEDATA and search in the forum then u will get so many threads.
serach from there and write accrding to ur req.
Thanks,

ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

HI GUYS ,
I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
IAM GETTIGN AN ERROR MESSAGE
'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
REQUIRE HELP ON THIS
THANKS

Hello Nishant
All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
You may also have a look at thread what are the parameters have to pass to bapi material creation?
Regards
Uwe

ALE IDOC Transfering Material Master From One Client to Another Client

I am using ALE Idoc transfering material master from one client to another client with MATMAS msgtype the details of Idoc received on receiver side is showing message i.e no Idoc is selected at receiving side after passing partner number in WE02 transaction.
As I am new to ALE/IDOCS , I am transferring material master from one client to another client with in same system on IDES using ALE/Idocs the details of IDOC received on receiver side is showing message i.e no IDOC is selected at receiving side after passing partner number in WE02 transaction and showing current status 51 instead of 53 i.e no details of IDOC is received at receiver side using MATMAS Message-Type. It is <removed by moderator>
Kindly provide solution.
Naveen
Message was edited by: Naveen Grover
Message was edited by: Manish Kumar : Subject and formatting changed

Hello Naveen,
If the connection is available (test with SM59 + Connection identifier),
after choosing your Connection you can test the connection:
you might find the idocs with the daate when they where sent in SM58:
The message says in this case there was no service, there might also be other errors like "wrong password" and so on.
After solving the error, you can restart sending the idoc from this screen.
Hope this helps .
Regards,
Gerlinde

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

LSMW - RMDATIND Upload material master

Hi All,
I'm using LSMW direct input method (RMDATIND) to upload material master. However, I'm having issues on uploading material prices (eg: moving average price) where the format uploaded was incorrect.
LSWM Data Source I've declared for VERPR (Moving Average Price) is character with 14 Length size. Values populated in upload file is eg: 132.93.
The value been created in material master is-> 13 293,00.
Can anyone advise on this issues? Is there any wrong to input value or data source declaration? Thanks.

Hi Blue Sky,
execute the whole process of LSMW in direct input and go to SM35 to check and process the session manually,,
-Regards
Sid

Unable to use SCAT to upload material master in ECC 6

HI
I am unable to use SCAT to upload material master in ECC 6,
an error is triggering
"Releases higher than 6.40 are not permitted
Message no. TT005
Diagnosis
With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
canany body please help me to use SCAT
Sreeram

you have to read yourself:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
I certainly do not use SCAT or SECATT to load master data, especially not material master.
A material master has dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

I have uploaded Material Master thr LSMW but Materials are not saved.

Hi
i have uploaded Material Master through LSMW but unfortunetly Matreials are not saved in system.

Hi
Check first with one record you are able to create the material Manually by using tcode MM01.
Or Rerun the batch Input in Foreground mode so that you can see the error or whether Materila no is created
I do not think so any test mode in Batch Input session.
Check the Log in SM35 for your session if you have any error messages.
Hope it helps
Karthik

Replicating of Material Master from ECC6.0 to SRM 5.0 in real-time

Hi,
I saw the URL on the steps to replicate Material Master from ECC to SRM:
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
It requires to run transaction r3as to load the material.
Can I check do we have to do this step periodically to pull material master from ECC?
Is there anyway to have a real-time RFC whenever the material is created or changed?
Thanks!
WEi

Hi all,
Thanks for the answers. Has anyone successfully sync the new material creation to SRM after initial load by configuring the delta?
What is the exact function module / Bdoc / idoc that sync the material master to SRM?
If we want to cusomize our own filter criteria like exlude certain material groups and include only material starting with certain numbers, how can we do that?
Thanks!
Regards,
Wei

Uploading Material Master data from legacy system

Hi all,
do we have any sap defined bdc for material master data ,if no ho to do that can anybody explain me step by step procedure how to do that
Thanks in advance
Santosh R

Santosh,
Use BAPI as we already have pre-defined BAPI for material upload given by SAP.
<b>BAPI_MATERIAL_SAVEDATA</b>
Also check this BAPI in MM01 uploading for the complete code I have written.
Regards
Aneesh.

Uploading material master from R/3 to CRM problem

Similar Messages

Maybe you are looking for