Uploading of floor plan failed, why?

Dear Sir,
I have a WLSE 1130 with software version 2.5 running in my current network. I managed to discover the APs installed in my network.
I used Microsoft Paint to draw a diagram of the floor plan of my building and save them in .jpg format as the WLSE location manager only supports JPEG format. However, when I tried to upload the diagram from my desktop and the upload is successful, no map is available for viewing when I clicked on the update. Can I know what I have done wrong?
Thank you.
Regards,
Delon

The document http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_book09186a00802633be.html might help you.

Similar Messages

I can't get two "room" objects to "glue" together in a floor plan

I can 't get two rooms to "glue" together in Visio 2010.
I've tried several ways to drag the "room" objects and handles around the floor plan but not only do the rooms not glue to each other, they snap or glue to other things (like ruler divisions), making it almost impossible to get the room walls to
overlap cleanly.
I found a forum posting somewhere where the respondent only suggested verifying default settings and I matched mine up with those, but that thread went cold without a solution.
What settings are required, and what steps are required, to glue two "room" objects together in Visio 2010?
Wayne Erfling (aka Cornan The Iowan)

Thanks, George,
You began your message with a question, but I think you understand "why I would want rooms to snap together", thus your work-around.
Nonetheless, the "big answer" is that I want to set the
room dimensions for each room individually (we're using Visio to place our belongings within each room) and then snap the rooms together to "build the house".
I started out by creating several rooms with correct dimensions (which I then locked with Developer / Protection).
That's when I discovered that the rooms "wanted" to snap to ruler divisions and geometry instead of to each other.
It's pretty clear that the room design templates / stencils in Visio 2010 have limited functionality - the "convert to walls" feature, for example, generates some pretty horrendous artifacts.
The second most irksome problem is connector routing - I've spent an hour or two doing nothing more than removing excess connection points because connectors insist on routing around some shapes, generating bizarre, wandering paths that I can't seem to disable.
But still, Visio 2010 is better for this purpose than CorelDraw and far better than "SmartDraw", and I don't have any CAD software. I just doubt that Microsoft has made Visio 2013 any better - Microsoft
seems to flip between simple maintenance releases and "grand" rewrites, failing to embrace anything like "continuous improvement".
Finally, the ribbon, a "blonde" solution at best, is particularly horrible in Visio - much of my work on this drawing has required me to switch among ribbon tabs.
Sorry for the rant, George, but anything I can learn to help with these issues will make the remainder of the job better.
Wayne Erfling (aka Cornan The Iowan)

HI what is meant by Floor plan manager?

HI Gurus....
Please somebody throw a light on Floor plan manager? why we required this?what is the advantage of it?
and what is meant by TRACK? what is the need of TRACK?
Please share the documenst if you have any for the above said topics.
you can send a document to [email protected]
Higher points will be rewarded for useful docs
Thanks in Advance,
Dharani

Floor Plan manager is a framework on whcih the ESS / MSS applications aer built. An ESS applications is built on the FPM arcitecture.
FM arcitecture follows the MVC arcitecture
As per FPM each XSS applications has the following three components
CC    Configuration Component
FC / BLC     Business logic component
VC   Visual component.
look into SAPs docmentation on the same

Facing Problem in creating the custom development over Floor Plan Manager

Hi All,
I have made one custom development over floor plan manager, but while deploying the application i am facing the following error.Please help in this regards,
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
     at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

I am trying to create interactive floor plans for my website Is it possible to do this in Flash CS4?

Is it possible to create interactive floor plans in flash CS4? Are there any tutorials out there to do this?

I don't see why not. Just create the elements you want to move around as MovieClips or swf's, add event listeners to these items listening for MouseEvent.MOUSE_DOWN, drag and MouseEvent.MOUSE_UP, drop.   writh the drag and drop functions and you're set.
function drag(e:MouseEvent):void {
     itemx.removeEventListener(MouseEvent.MOUSE_DOWN, drag);
     e.eurrentTarget.startDrag();
function drop(e:MouseEvent):void {
     itemx.removeEventListener(MouseEvent.MOUSE_UP, drop);
      e.eurrentTarget.stopDrag();

Trying to Email Photo Using Iphoto 09: Apple Event Handler Failed, WHY?

Trying to Email Photo Using Iphoto 09: Apple Event Handler Failed, WHY?
This keeps happening. Please help me solve it

This one comes up from time to time and it’s caused by a glitch in the AppleScript underpinnings that work in the background. Frankly, I’ve seen no solution for it and suspect that it would require a re-install of the System Software.
Alternaive:
Instead of making the email in iPhoto, add the photos to the email in Mail. Use the Photo Browser in the New Message Window and you have full access to the Library.
Uploaded with plasq's Skitch!
You can even resize the pics in the New Message Window as you do in iPhoto.
Uploaded with plasq's Skitch!
Regards
TD

Best and easy to use 3D floor plan software

So this is not particularly an Illustrator question...
I have started off drawing 2D floor plans for a client project. They now like the look of sparkly 3D floor plans.
Does anyone know of any good and easy-to-use software to tackle this please?

...there must be a catch!!
Why "must" there? I've never used it, but right off the bat, from a quick perusal of the web site:
It renders to a raster image. But that may not be a problem for your use.
Evidently, the Pro viersion is prensently only available on Mac OS. But you don't say what platform you are on.
Other than that, nowadays don't assume there must be some "catch" just because a program is lower priced than programs like Illustrator.
Regardless, if you have a series of such drawings to do, I would use a 3D modeling program, not Illustrator, for converging perspectives like this. Otherwise, as soon as you have a couch drawn in one position, someone is going to want you to move the couch to the other side of the room, requiring it to be redrawn.
Alternatively, if it were me, I'd probably have approached the project using parallel perspective (2D axonometric drawing). One of the primary purposes of axonometric drawing is to maintain uniform information density throughout the drawing; the viewer needs to see as much detail in the most distant room as in the nearest.
But if you are already committed to converging perspective, that's not an option. Most 3D modeling programs can render parallel perspective. But whatever 3D program you decide upon, you'll no doubt want one offering a library of pre-built common objects (furnture, cabinets, etc.) that can be edited and added to. So if you go with Live Interior 3D, you'll want the Pro version--again, assuming you are on Mac OS.
JET

Actually 2013 Visio, Changing size of completed floor plan drawing.

I completed a very detailed drawing in Visio that is 24" x 36" and in Portrait. It was the only way I could get it to print it on our printer. However, I wish to change the drawing size to Ledger (11 x 17) and in Landscape. Visio
only changes the paper size and not the scale or orientation. so I get pieces of the 24" x 36" Portrait drawing on multiple pieces of Ledger paper in landscape. How can I change that? or if I want to change to landscape and remain in
24" x 36", so that I am looking/working at the drawing in Landscape.

Hi,
According to your description, my understanding is that you want change the drawing size from 24" x 36" to 11" x 17and the floor plan shapes fit the drawing size.
If it is, I recommend we modify the "Drawing scale" manually to fit the page size.
Click Design Tab>Size>More page size>Drawing scale
If I misunderstand something, please let me know, or you may upload some images in the thread.
Regards,
George Zhao
TechNet Community Support

How to get the floor plan in Webdynpro component ?

Hi,
How to get the floor plan in Webdynpro component ?
Best Regards,
Tripathi

Hi,
Just copy the templates from Webdynpro Component by choosing OIF or GAF or QAF template.
Regards,
Bansidahr

Floor plan manager in WD ABAP

Hi All,
Can you please tell me how to use Floor plan manager in WD ABAP.
Thanks in advance.
Sonia

Hi Neha Agarwal,
I have a webdynpro leave request application which is in Floor Plan Manager in Java webdynpro.
My leave request java WD application has 4 different functional steps like view-> edit->review-> complete.
User completes the steps one by one...and for that there are 4 screens--and user moves from one screen to another after completing each step.
Now I made the changes in the edit view which has the duration field which needs to be filled with half of the work schedule allocated to the employee per day if they chose half day leave in the application.
As per the requirement duration field populated the data(half of the work schedule allocated to the employee per day ) but when I hit review button,navigation goes to the next screen duration field has the value of full work schedule (say 8 hours)which suppose to be half of the workschedule .(say 4 hours).
any clues ?what will be the root cause of this problem..............
Higher points will be rewarded for the useful inputs.............
Thanks in Advance,
Dharani

How do you create an interactive floor plan in flash using AS2?

I am attempting to make an interactive floor plan. I am sure that I have done it wrong, I am new to flash. So far I have outlined the rooms that I want to make "hot spots", turned them into buttons. Then I selected all the buttons and turned it into a movie clip called "mcbtns". I then turned it into a movie clip again, named it "mcbtninside"; this is where I house all of my buttons which have instance names "btn1" thru "btn11".
The images that corrospond with the rooms of floor plan are housed in a movie clip named "mcPhotos". On the timeline the photos are place at 10 frame increments, and the Action Script time line above them has frame names "img1" thru "img11", which corrospond with the photos every 10 frames. Frame 1 on the AS line has the code stop();
Now back to Scene 1...
Scene 1 frame 1 on the Action Script line I have in the following script:
mcPhotos._visible = false;
this.mcbtns.onRollOver = function() {
     mcPhotos._visible = true;
this.mcbtns.onRollOut = function() {
     mcPhotos._visible = false;
stop();
In frame 1 on the Action Script line within "mcbtninside" I have the following script:
var frameNum:Number;
function photoChange(){
     _root.photos.gotoAndPlay("img" + frameNum);
btn1.onRollOver = function(){
     frameNum = 1;
     photoChange():
btn2.onRollOver = function(){
     frameNum = 2;
     photoChange():
The code continues thru btn11.
So I am sure that I have gone wrong in many places. If someone could lead me in the right direction I would greatly appreciate it.

Take all the interactive code off the mcbtns movieclip, and even get rid of that clip if it serves no other purpose than to collect all the rooms. Assign the code to make the photos appear / disappear to all of the rooms... (what's shown below assumes mcbtns went away and the rooms are on the same timeline as the photos mc)
btn1.onRollOver = function(){
     frameNum = 1;
     photoChange():
     mcPhotos._visible = true;
btn2.onRollOver = function(){
     frameNum = 2;
     photoChange():
     mcPhotos._visible = true;
btn1.onRollOut = btn2.onRollOut = function(){
     mcPhotos._visible = false;
If you keep the mcbtns movieclip, then your button code would have to use a _parent reference to target the mcPhotos... _parent,mcPhotos.visible = etc... actually, I'm not sure where things lie in that aspect, so hopefully you can figure out the correct targeting

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

HT5957 I've deleted data from my iCloud and purchased the 10 gb plan. Why won't my I phone5 let me now update to ios7??

I've deleted all data from my I cloud acct. purchased the 10 gb plan. Why won't my I phone let's load the new iOS 7? It says I need 3.9 gb of room which is why I deleted all I cloud info. Does it need tr to register the changes?

Did you get a message on your phone about not enough storage space and therefore could not update the iOS?
The storage space referred to in a message like that is the space on your device. It is not the amount of iCloud storage you have. What you need to do is delete enough files, photos, videos, apps etc. from your iPhone so as to free up enough space on the phone so that you can download the update.

Having Problem Adding to drag and drop to move furniture over a floor plan

I have the code which follows. I need to create floor plans where web visitors can drag and drop furniture onto the floor plan. I have three items that work but when I convert any additional items to a symbol and select movie clip and then add more lines to the code, none will work.. How can the code determine that my movie clip I named "couch" is going to movie clip 4. Thank you if you can help, Frankie Foster
Below is my code:
var numObjects:uint = 3 // assign the total number of movieclips that will be dragged
for(var i:uint=1; i<=numObjects; i++){
     this["movieClip_"+String(i)].addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
     this["movieClip_"+String(i)].addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
var selectedMC:MovieClip;
movieClip_1.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_2.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_3.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_1.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
movieClip_2.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
movieClip_3.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
function clickToDrag(event:MouseEvent):void
     selectedMC = MovieClip(event.currentTarget);
     selectedMC.startDrag();
function releaseToDrop(event:MouseEvent):void
     event.currentTarget.stopDrag();
stage.addEventListener(KeyboardEvent.KEY_DOWN, nextQuestion);
function nextQuestion(event:KeyboardEvent):void {
      //trace(event.keyCode);
      if(event.keyCode == Keyboard.RIGHT)
           selectedMC.rotation += 5;
      if(event.keyCode == Keyboard.LEFT)
           selectedMC.rotation -= 5;

Your appear to have redundant coding assigning your listeners. What code are you trying to add/modify to make the couch function like the others?
this...
for(var i:uint=1; i<=numObjects; i++){
     this["movieClip_"+String(i)].addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
     this["movieClip_"+String(i)].addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
currently does what this also does....
movieClip_1.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_2.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_3.addEventListener(MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_1.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
movieClip_2.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);
movieClip_3.addEventListener(MouseEvent.MOUSE_UP, releaseToDrop);

Adobe flex with floor plan manage

Hi,
Can we be integrate ABAP floor plan manager with adobe flex ?
Many artical says that ABAP web dynpro can be integrate with adobe flex. However I could not found any document related to floorplan manager with adobe flex.
Thanks,
Jennifer.

Hi Jennifer,
FPM in its essence consists of WD ABAP coding. Therefore as a general rule, what is possible with WD ABAP is also possible with FPM. You can try this: Create a freestyle UIBB and there inside this integrate your Flex stuff in the way as you would do with freestyle WD ABAP. Then when you're finished you can make use of that UIBB in FPM where ever you would like to.
Regards,
Ulrich

Uploading of floor plan failed, why?

Similar Messages

Maybe you are looking for