Uploading open sales orders from sap

hi all,
i need to upload open sales orders from legacy to sap. pls advice what steps need to be followed for the same.
1) how we will we download open sales order from legacy and where..... is it to some flat file or some other option is there . pls tell some options.
2) how we will uload the sales ordes into sap . thru lsmw or is there some other option ?
3) there will be more number of fields in sap than in legacy. i think we need to manully create an excel file and add more fields manually in excel file so that the compulsonry feilds as per sap are present in sap ?
4) how will availability check happen in sap after sales order are t/f from legacy ?
rgds
pamela

hi pamela,
1.a. you need to down load in EXCEL in legact format and convert the same in LSMW format and upload it
2.a. LSMW - Functionally, BDC, BAPI - Technically. to my knowledge LSMW is better option.
3.a. first you download to EXCEL file from LEGACY, then align the same to SAP format you can add those fields that are mandatory as per your requriment.
4.a.You are uploading sales orders in SAP which are showing OPEN status from LEGACY before you uploading the sales orders MM consultant would have uploaded its stock through 561 - dont worry on that, even though if stock is not uploaded also not an issue it will confirm at the later date.
5.a. we have used LSMW process for our PREVIOUS ASSIGNMENT, before that we tested BAPI for it some how it was not capturing some fields.
hope all your queries are solved
balajia

Similar Messages

Migrating Open Sales Order From Legacy System (SAP) To SAP System

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

hi jyothi ,
   there are lot of ways of doing it depending on data upload volume it will be decided .
1) thru abap bdc program which directly uses XL sheet data and creates SO using bapi/FMs.
2) using scat.functional consultant should be good enough to use this.
3)lsmw-laborious procedure but achievable.
reward if helps !!!!!

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Uploading Open Sales Orders

Dear All,
Can some one kindly let me know how to upload open sales orders, open deliveries , open Purchase orders and open invoices.
Your early replies are very much appreciated.
Rgds,
Ravi

Hello Ravi,
Use LSMW for uploading the data involving open sales orders, open deliveries , open Purchase orders and open invoices.
Here are the steps which you can follow :
1. Define the source structure as well as the field of the legacy system.
2. Perform the Cleansing activity to eliminate the unwanted data if present.
3. Extract the Data from the legacy system.
4. Field and structure Mapping of the Target (SAP system) is be done.
5. Start the process of Uploading.
6. Correct if any discrepancies that comes up due system performance issue.
Regards,
SARTHAK

Uploading Open Sales Order

Dear friends,
Is there a standard program to upload the open sales order?
Thanks

hi,
BDC stands for block data conversion. its a tool for data upload. you create the BDC by first creating the recording for the transaction for which the data upload is to be done, in this case its va01. the recrding is done in t-code shdb. you can seek help from your abap team.
saurabh

Transfer Sales orders from sap to non sap

Hi,
I want to tranfer the data meaning sales orders from my SAP system to
external system
Has anybody worked on this or any ideas.
Rgds

Hi,
Use orders idoc and IDOC_OUTPUT_ORDERS Function module to sent the sales order data from SAP to other system. Please check you have all the ALE configuration done in your systems.
KR Jaideep,

Error while creating OTR by sales order from SAP ECC to TM

Hi Experts,
We are trying to integrate ECC to TM. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise.
Thanks & Regards,
Aunkur De

Hello Aunkur De,
Could you check if the business partner was assigned in to your location?
I have passed for a issue like that.
Best regards,
Vicente Picardi

Replication of Sales Order from SAP ECC to SAP CRM

Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh

1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

LSMW BAPI Open Sales Order Load - How to update conditions?

Hello gurus,
I was using the BAPI SALESORDER_CREATEFROMDAT2 to upload open sales orders. Wanted to overwrite the default PR00 pricing condition that gets pulled from the customer-material info record, with the price that was existing in the original legacy system when the order was created there. Used the E1BPCOND structure in the Idoc, but since there is no such thing as a E1BPCONDX structure(corresponding to the structure BAPICONDX in the origial BAPI) where you could specify whether the condition should be updated, added or deleted, it adds a second PR00 condition with the legacy system price. The original PR00 condition with the customer-material record price still stays there. Eventhough the order seems to be taking into consideration only the second one I added, to determine the total pricing, I am worried the original sitting there, might cause problems down the document flow. Is there a way to update the existing PR00 condition(rather than adding a new one) on the order, through some flag in the Idoc structure that I am not aware of?
Would greatly appreciate an answer ASAP.
Thanks a lot in advance,
Wayfarer

Thanks and appreciate your taking your time to reply, Gerard, I guess my problem is, we are still on 46C, and the only message type available for this BAPI is SALESORDER_CREATEFROMDAT201. Just called a friend who is on ECC 60 who confirmed that the later version of this message type, SALESORDER_CREATEFROMDAT202 has the E1BPCONDX structure. I don't have that option since on LSMW it automatically defaults to the only message type(and method CREATEFROMDAT2) that is available, when you choose business object BUS2032. Guess I am out of luck, unless you have any other options to suggest.
Thanks,
Wayfarer

Best Way to Import Open Sales Orders

Dear Experts,
Which is the best possible way to export and import open sales orders from one DB to an another both being (SAP B1 2007)
Regards,
Aditya

Hi,
The only othe way to acheive this would be with SDK really. I've heard of people doing things like this in the past where the volume of data was so much that it was worthwhile to write some code, but to be honest if you're relatively proficient in DTW then you can have done the job by the time you've conned a programmer into writing it for you!
Good luck!
Julian

How to find open sales orders.

Hi Gurus,
Can you please help me out How to find open Sales orders in SAP.
Is there any transaction code available or we can get it through via tables.
Your afforts are highly appriciated .
SRavani.

Dear SRAVANI,
You can find open sales orders from the Transaction code "VA05N", You just run this report, Below the screen you can find open sales orders radio button , you select this and give execution parameters and execute(F8).
You will get the all open orders.
Hope it fixes your issue.
Please check it and revert.
Thanks&Regards
Raghu.k

All Open Sales Orders in APO system

Hi Experts,
We have a requirement in which we have to get all open sales orders in SAP APO system for 2013. Please suggest if there is some way to do this.
Thanks in advance.

Hi Manjunatha,
RRP1 will list all the requirements: sales orders, forecast, dependent demand, putchase order release, etc.
Same than in all the ALV reports, you can change the layout, sort, use filters in order to only see the document that you need, etc.
Here you can an example of my system, where you have sales orders in RRP1:
Kind Regards,
Mariano

Copy Open sales oder from one DB to Other DB

Hi Expets,
Can any one help me how to copy Open Sale Order from one data to another Database which exact replica(Both are Same configration)
Kathi.

Karthi,
I could give you some guidelines as you only know about the complete business data.
You will need Header and Row level data.
Header Data:
DocNum, CardCode, DocDate, DocDueDate, SlpCode, GroupNum, TrnspCode
Row Data:
ItemCode, Quantity, Price, {any other additional row data....}
Suda

Open Sale Orders against Materials

Hi Friends,
I want a list of Open Sale Orders against a list(set) of Materials.
I will give a example :-
If material A, B and C.
I should be able to search Open Orders against all three materials at a time.
Please help me find a solution.
Regards,
Nikhil Pavagadhi

Hi,
may be you can think of developing a Z report which would have all the functionality you are looking for.
for the selection screen you can give all the materials for which you want to find the open sales orders, from there these materials are searched in VBAP table to find all the sales orders for the given period or even may be range of sales orders. Then, all these sales orders are checked for status at VBUP(item status) table since you want to find out open status at item level.
Hope this might fulfill your requirement. Please consult your abaper to develop this.
regards
Sadhu Kishore

Uploading open sales orders from sap

Similar Messages

Maybe you are looking for