Uploading stills giving odd clip length for time laps.

I'm putting together a timelapse movie with about 6K stills. I have them gathered in groups of 600. They're all about 4 megs. I'm taking them into a sequence at 24 fps. Why is my clip coming in at about 6 sec's? Then another group of 600 stills coming in at .04 sec's??? Driving me crazy. I'm a photographer and total nubile in Premiere, so, go ahead and laugh but please let me know what the hell's going on.

OP said "They're all about 4 megs"
Does the latest PProCC still have problems with using "many" large pictures?
To the OP (Original Poster) if Jim answers "yes" to my question, read below... if he says "no" just ignore this
Some of this is from the Premiere Elements forum, but the idea of sizing pictures is the same for PPro or Encore
Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PPro Crash http://forums.adobe.com/thread/879967

Similar Messages

Is apple still giving out free bumpers for those who need it?

purchased an iphone 4 awhile now and wondering is apple still doing bumper cases for free?

I don't believe so, think that promo ended last year. You are free to contact them directly to inquire, we are just users here.

Log & capture clip length

log and capture seems to arbitrarily determine the clip lengths for a longer piece of footage. each clip within a longer clips seems to vary between 2 seconds to 30 seconds. is there a way to make the clip length more uniform?
thanks

I do not understand. Please describe your workflow in more detail. What format material are you working with, etc.

How to write data to the DAQ for a specified length of time while still reading the input data?

Hello,
I'm using labview 2012 and am trying to turn on a signal for a specified length of time in labview at the press of a button. The signal goes into an AO (PXI 6723) through my system, where the voltage gets divided by 2, the read in through the AI (PXI 6225). I want to write and read voltage constantly and then have a spike of voltage after pressing a button in LabView while still reading the voltage value for the specified amount of time.
Parameters:
constant voltage of 1 volt to Analog output (reading and writing) seen through a waveform chart.
for 1 second, turn on 3 volts and see the response on the waveform chart.
My specified delay time does not match the elapsed time. I am having difficulties doing this. I have attached the VI.
( I can't upload a functional VI since it shows "the contents of the attachment doesn't match its file type") How can I attach the VI?.
Thanks!
Eduardo

Mike,
Thank you for your reply! I greatly appreciate it. I currently don't have any DAQmx timing in my application. I tried using it and, without really understanding how it works nor how to manipulate it, the whole test end up taking a long time to change the values i.e. too slow.
The DAQmx timing I used was the sample clock since it was for analog signals, but I don't really understand the buffer, what that means nor how to use it. inputting a rate time for it also made my test slower. The rate time is the samples per channel per second, but I'm not sure how to determine a number so that I am collecting the data I need and take into account aliasing.
I know the PXI 6225 has the capability to read 250kS/s (which I am assuming it's kilosamples per second or 250,000 samples per second). I am using 32 differential channels. I have read that I have to divide the maximum sample rate by the number of channels, (250kS/s / channels) but I don't know if I should count the number of total channels (64) or differential channels(32). In other words, is the per-channel maximum rate:
250,000/32 = 7,812.5 samples per channel per second, or
250,000/64 =3,906.25 samples per channel per second
Furthermore, If I know the number of samples per channel per second, how can I implement that knowledge to the DAQmx sample clock so that my sampling is as fast and as accurate as it can be?
I attached an image of my DAQmx functions in my code, I merged all the stacked sequence structures in paint so you can see them.
thanks for your help!
Eduardo
Attachments:
DAQmx tasks.jpg ‏211 KB

Clip length and Workflow with iPhoto (I need a pdf for a final...)

I'm feeling like a total lunkhead after taking a number of passes at this in the past year.
Short question:
How do I control clip length in iMovie? Does it work one way when you bring images in and another way when you bring in a slideshow?
Long question:
I need to get from images organized in iphoto to a pdf or ppt presentation and right now this means I am organizing the photos in iPhoto (a breeze), exporting as wmv and then importing this into iMovie. In iMovie I am just adding a title on the first "slide".
Now I am trying to make sure I have no dissolve effects between slides, make sure I can control the length of each slide and to get this exported into a "manually" advanced pdf.
At some point I would like to get some vector based linework into my presentations as well and for some reason I am bypassing Keynote in the above setup.
Can anyone help me get to a manual pdf so I can get out of the ditch here?
Thanks for any help.

It sounds like you've got a somewhat complicated issue.
I'm simply trying to create match a single image file with a 35:00 min podcast so I result in a movie that I can upload to Vimeo (they don't accept audio, only video). I'll watch your post to see if anyone can explain making still images longer (mine caps at 10:00 min).

How do i up date my apps? i have 8 updates for apps but its still giving me my old username and wants my old password

How do i up date my apps? i have 8 updates for apps but its still giving me my old username and wants my old password when i go to update. i have restored and everything works except when i go to update the apps. ican access all other info with new username and password. when i go to update the 8 apps that need to update it shows my old username and is askinf for old password.

- You have to sign into the account that purchased the app in order to update the app.
- If there are more than one app that needs updating and they were purchased by different accounts you have to update them one at a time until the remaining apps were purchased with one account.
- Also, if you changed your password you have to go to Settings>Store and sign out of the account and sign back in with the updated password.

Group Items showing for different lengths of time

I have created a group of check and x-marks to indicate correct and incorrect answers. The check mark and X-mark are both smart shapes. In my advanced actions, I hide the group and then show either a check or X-mark after the answers have been submitted. The advanced actions are written as, " show X-mark" and "Hide Check Mark" and vice versa. But when I preview the slide the check mark only stays by the correct answers for 3 seconds, and the X-marks remain.
Any ideas as to why two items in a group would display for different lengths of time?

Lieve, was the timeline okay or did you need more? One thing that was different about the check marks, I noticed, was that they were set as "Use as button". I unchecked that box for each of the 72 check marks that are on my slides. I think that I got them all. However, they are still each linked to 24 Object style manager Smart Shapes which will help me position them three at a time. I don't see anything in the Object style manager that has a setting that might affect the length that they stay visible.

Minimum length for stills ?

Hi everybody,
I wanted to import stills in a movie in a way that they would not look so much as stills.
I thought I would reduce the length of time to 1 sec.
When I wanted to render that part (a few images) I got a message saying "general error"
Is there a minimum length of time required for the stills ?
thanks in advance
Ivan

RVB? You mean RGB?
From the original picture that I import, and which is about 5 minutes, what is the best way to reduce the length to a few images ?
I don't understand. Pictures don't really have a LENGTH. I mean, FCP can import them as 1 frame or 5 min....and that is in the User Prefs. But reducing the original picture to a few images...that throws me. The picture...a STILL picture, is ONE image. So how can you reduce ONE image to a few images?
Shane

Display "global" text caption for a certain length of time

I hope I can explain what I'm trying to do...
I have a text caption that I want to conditionally display for a fixed length of time at the start of most of slides in my project.
The caption is placed on an introductory slide in the project, in a hidden state.
Then I have created a Conditional Action to Show the caption. This Advanced Action is then called On Enter for the slides where I want to display the caption. However, I need to be able to hide the caption again after a couple of seconds.
So essentially I want the following logic:
On slide entry, if displaying caption, then Show Caption, Wait 2 seconds, Hide Caption.
But I can't see how to do this using a single text caption that is available project-wide.
Any suggestions would be greatly appreciated!

Check out David Stiller's blog article on that exact topic
here:
http://www.quip.net/blog/2006/flash/how-to-pause-timeline
smile82 wrote:
> How do i stop a movie for a certain length of time?

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Still images per second and "shutter times" for webcams

Hi! I'd like to know how frequent a webcam (such as Optia AF) can take still images (at for example 2 megapixel) and send them to the PC via USB. Also, I'd like to know how long the "shutter time" is for still images, and if it can be adjusted. I want to be able to take sharp still images of moving objects and to process those images in near realtime. What webcam would be good to use for this purpose?I would be grateful for any advice!

Great news. For Time-Lapse, I probably go with 3 - 5 Frames for my Stills Duration most often, but it depends on the look and feel that I am trying to obtain, and also the interval that the shooting took place. Sometimes I end up with less, but sometimes more - it just depends on the look. I usually do a test Project, and Import a few Images at 3 Frames, then play that many times, to see if I like it. If not, then off I go to 4 Frames, etc.. You were going in the other direction, as you already had a good feel for the pacing of your piece - you just needed to do the math to get there.
Good luck,
Hunt

I want to snooze an event for a different length of time than the default. How do I select a different snooze length?

I just upgraded to Mountain Lion and I can't see how to snooze an event alert for other than the preset 15 minutes. How do I snooze events and other alerts for different lengths of time than the default? Sometimes I want to snooze an event until the start time or maybe for a whole day.

SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
More information:
http://on-core.com/snoozemaster/

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

Mountain Lion refuses to install on Hard disk because it is used for Time Backups. I have mounted a different disk for tame backups and still, I cannot install the OSX. What do I do?

I donwloaded the Mountain Lion OSX and it would not install because it said that the hard disk is used for Time Backups. I then mounted a separate Hard Disk and started running the time backups on it.
Still, the Mountain Lion would not install on the main hard disk.
How do I convince it that the haerd disk is no longer used for time backups?

Read through this: https://discussions.apple.com/docs/DOC-4055

Uploading stills giving odd clip length for time laps.

Similar Messages

Maybe you are looking for