Uploading text files to my iCloud drive?
I have two Macs. Both running Yosemite (10.10).
One of my Macs is a MacBook Air – for when I am on the road – the other is a 27inch iMac, for when I am in the studio.
I have need to save Text documents direct to my iCloud drive.
I find that when I save from the MacBook Air the to the Cloud the files are transferred directly to the Cloud drive. No problem. So I can access my files from my other computer.
However with the iMac they are saving to the iCloud drive on my computer but they are not appearing on the Cloud drive remotely (i.e.: I cannot see the files from my Air) and the files need to be copied manually – which defeats some of the object.
Any ideas what I may be doing wrong?
I have resolved this issue. I would like to say it was some cunning preference that I hadn't noticed, but I am afraid not.
It was more a case of me being stupid.
Thanks for your interest anyway.
Similar Messages
-
How can I use my PDF files stock on iCloud Drive true my Iphone or Ipad?
How can I use my PDF files stock on iCloud Drive true my Iphone or Ipad?
Thank you,
I know also Documents to go, But I thought that with the Ios 8 upgrade, they would let us have an Apple Apps to make it more simple...!
But thank you again.
Alain -
Upload text file to oracle table with checking and aggregation
Hi Friends,
I am new to ODI. I have encountered a problem which is specific to ODI 11G (11.1.1.6.3) to upload text file to oracle table with checking and aggregation. Would you please teach me how to implement the following requirement in ODI 11G?
Input text file a:
staffCode, staffCat, status, data
input text file b:
staffCodeStart, staffCodeEnd, staffCat
temp output oracle table c:
staffCat, data
output oracle table d:
staffCat, data
order:
a.staffCode, a.staffCat, a.status
filter:
a.status = ‘active’
join:
a left outerjoin b on a.staffCode between b.staffCodeStart and b.staffCodeEnd
insert temp table c:
c.staffCat = if b.staffCat is not null then b.staffCat else a.staffCat
c.data = a.data
insert table d:
if c.staffCat between 99 and 1000 then d.staffCat = c.staffCat, d.data = sum(c.data)
else d.staffCat = c.staffCat, d.data = LAST(c.data)
Any help on fixing this is highly appreciated. Thanks!!
Thanks,
ChrisDear Santy,
Many thanks for your prompt reply. May I have more information about the LAST or SUM step?
I was successful to create and run the following interfaces p and q
1. Drag text file a to a newly created interface panel p
2. Filter text file a : a.status = ‘active’
3. Lookup text file a to text file b : a.staffCode between b.staffCodeStart and b.staffCodeEnd
4. Drag oracle temp table c to interface panel p
5. Set c.staffCat : CASE WHEN b.staffCat IS NULL THEN a.staffCat ELSE b.staffCat END
6. Set c.data : a.data
7. Drag oracle temp table c to a newly created interface panel q
8. Drag oracle table d to interface panel q
9. Set UK to d.staffCat
10. Set Distinct Rows to table d
11. Set d.staffCat = c.staffCat
12. Set d.data = SUM(c.data)
However, the interface q should be more than that:
If c.staffCat is between 99 and 1000, then d.data = the last record c.data; else d.data = sum(c.data)
Would you please teach me how to do the LAST or SUM steps? Moreover, can interface p and interface q be combined to one interface and do not use the temp table c? Millions thanks!
Regards,
Chris -
Upload text files with non-english characters
I use an Apex page to upload text files. Then i retrieve the contents of files from wwv_flow_files.blob_content and convert them to varchar2 with utl_raw.cast_to_varchar2, but characters like ò, à, ù become garbage.
What could be the problem? Are characters lost when files are stored in wwv_flow_files or when i do the conversion?
Some other info:
* I see wwv_flow_files.DAD_CHARSET is set to "ascii", wwv_flow_files.FILE_CHARSET is null.
* Trying utl_raw.cast_to_varchar2( utl_raw.cast_to_raw('àòèù') ) returns 'àòèù' correctly;
* NLS_CHARACTERSET parameter is AL32UTF8 (not just english ASCII)Hi
Have a look at csv upload -- suggestion needed with non-English character in csv file it might help you.
Thanks,
Manish -
Uploaded text file has a new line added at the top using BSP MVC applicatio
I have a BSP MVC application that uploads data on to the application server. When I open the uploaded text file, the very first line on the file looks like the line below. ->
htmlb:button:click:nullhtmlb_form_1UploadUpload0htmlbdfsdf
But the rest of the file looks okay. This is causing other than .txt files to get corrupted.
Here is the code from my DO_HANDLE_EVENT.
data: entity type ref to if_http_entity,
name type string,
content type xstring,
content_type type string,
idx type i value 1,
v_root(26) value '
houappl131\SRM_Download\',
v_unxfile(100),
v_transfer type xstring,
v_type(6),
v_len type i,
v_dirfile type zfileinfo,
v_ofile(80),
v_guid type guid_32.
class cl_htmlb_manager definition load.
data: v_asn(10) type n.
data: fu type ref to cl_htmlb_fileupload,
file_id type string value 'batchfile'.
data: o_page_context type ref to if_bsp_page_context.
data: parent type ref to cl_bsp_controller2,
lo_model type ref to cl_sus_m_asn_detail.
o_page_context = me->get_page_context( ).
cl_htmlb_manager=>dispatch_event_ex( request = request
page_context = o_page_context
event_handler = me ).
refresh z_batch->message.
if htmlb_event->server_event = 'Upload'.
fu ?= cl_htmlb_manager=>get_data( request = request id = file_id name
= 'fileUpload' ).
if fu->file_name gt space.
z_batch->parameters-fpath = fu->file_name.
v_len = strlen( z_batch->parameters-fpath ).
if v_len gt 4.
v_len = v_len - 3.
endif.
v_type = z_batch->parameters-fpath+v_len(3).
search z_batch->parameters-fpath for '.'.
if sy-fdpos gt 0 and v_len gt 0.
v_len = v_len - sy-fdpos.
v_type = z_batch->parameters-fpath+sy-fdpos(v_len).
endif.
clear v_asn.
v_asn = z_batch->parameters-asnhdr.
concatenate v_asn
z_batch->parameters-asnitem
z_batch->parameters-batch
v_type
into v_unxfile separated by '.'.
concatenate v_root v_unxfile into v_unxfile.
condense v_unxfile no-gaps.
open dataset v_unxfile for output in binary mode.
while idx <= request->num_multiparts( ).
entity = request->get_multipart( idx ).
name = fu->file_name .
if name is not initial.
content_type = entity->get_header_field( 'Content-Type' ).
clear content.
content = entity->get_data( ).
v_transfer = content.
transfer content to v_unxfile.
append content to z_batch->filetab.
endif.
idx = idx + 1.
endwhile.
close dataset v_unxfile.
endif.
endif.
Here is my fileupload button in the view
<htmlb:page title="File Upload " >
<htmlb:form method = "post"
encodingType = "multipart/form-data" >
<htmlb:label id = "Batchnum"
design = "Label"
for = "Batchnumber"
text = "Batch" />
<htmlb:inputField id = "Batchinput"
value = "//zbatch/parameters.batch" />
<htmlb:fileUpload id="batchfile" />
<htmlb:button id = "Upload"
text = "Upload"
onClick = "Upload" />
<htmlb:button id = "Close"
text = "Close window"
onClick = "Close" />
Any of you gurus know why this is happening?I solved it myself
-
Read pdf files stored in icloud drive from ios8
Ok. So how do I Access and read my PDF files stored in icloud drive from my ipad?
I´ve read that there´s no icloud drive App like dropbox and that it has to be done from a third party App. (strange enough), but I can´t seem to find a third party App that connects to icloud drive yet.
Thanks.The Apple website specifically states "Because with iCloud Drive, you can safely store all your presentations, spreadsheets, PDFs, images and any other kind of document in iCloud and access them from your iPhone, iPad, iPod touch, Mac or PC.".
Now, howe do I "store my PDF" and "access them from my iPhone"? -
How to retrieve pdf file saved in icloud drive from iphone
how to retrieve pdf file saved in icloud drive from iphone or ipad
Hi henawybek,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides answers to frequently asked questions about iCloud Drive and will help you solve your question.
iCloud Drive FAQ
You can access your files in iCloud Drive any of these ways:
On your iPhone, iPad or iPod touch with iOS 8, you can use Apple apps like Pages, Numbers, and Keynote, or any apps that support iCloud Drive.
I hope this helps.
-Jason -
Safari & FireFox freeze when I try to upload a file from my hard drive.
Safari & FireFox freeze when I try to upload a file from my hard drive. This just started happening in the past couple of days. I haven't installed any software, or made any updates (that I can remember.) When the browser freezes I can't "force quit" them. I have to manually shut the computer down are restart it. I would appreciate any help you can provide.
HI and welcome to Apple Discussions...
Safari and Firefox box.... it could be a problem with the hard drive itself, not your browsers.
Just to make sure, boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors Disk Utility reports.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
Carolyn -
hi
i want to create BDC program for the data uploding.. but i dont hv much knwloadge of about it. i need to sample code the data upload program. i hv to upload text file format. im using gui_upload funtion if u hv any sample plz send me it plz... thnx
regad
nawaCheck the following code:
Selection screen :
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-020.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
PARAMETERS: p_locl RADIOBUTTON GROUP g1 " desktop file
DEFAULT 'X' USER-COMMAND fil,
p_phys RADIOBUTTON GROUP g1. " appln server file
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002 .
PARAMETERS: p_ifile TYPE dxfile-filename LOWER CASE, " source file
p_afile TYPE dxfile-filename LOWER CASE, " asset class file
p_cfile TYPE dxfile-filename LOWER CASE, " Cost center file
p_dfile TYPE dxfile-filename LOWER CASE, " Depr key file
p_ofile TYPE dxfile-filename LOWER CASE. " Audit file
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-015.
PARAMETERS: p_test RADIOBUTTON GROUP g2 DEFAULT 'X', " test run
p_create RADIOBUTTON GROUP g2. " data migretion
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK b4.
Main program :
REPORT zfaac900
LINE-SIZE 132
LINE-COUNT 65
NO STANDARD PAGE HEADING
MESSAGE-ID ZFAA.
* includes
INCLUDE: zfaac900_top,
zfaac900_selection_screen,
zfaac900_subroutine.
* AT SELECTION SCREEN ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ifile.
PERFORM help_input_file USING p_phys p_locl CHANGING p_ifile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_afile.
PERFORM help_asset_file USING p_phys p_locl CHANGING p_afile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cfile.
PERFORM help_cost_file USING p_phys p_locl CHANGING p_cfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dfile.
PERFORM help_depr_file USING p_phys p_locl CHANGING p_dfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ofile.
PERFORM help_audit_file USING p_phys p_locl CHANGING p_ofile.
* AT SELECTION-SCREEN
AT SELECTION-SCREEN.
PERFORM check_screen USING p_ifile p_afile p_cfile p_dfile
p_ofile p_locl p_phys.
* TOP-OF-PAGE
TOP-OF-PAGE.
ULINE.
PERFORM sjm_heading IN PROGRAM zacai0005.
ULINE.
* START_OF_SELECTION
START-OF-SELECTION.
PERFORM get_input USING p_ifile p_afile p_cfile p_dfile
CHANGING i_input i_asset i_cost i_depr.
Subroutines :
*& Form help_input_file
* text
FORM help_input_file USING p_phys_file TYPE c
p_locl_file TYPE c
CHANGING p_source_path TYPE any.
IF p_phys_file EQ 'X'.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_IFILE'
dyname = sy-repid
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
ELSEIF p_locl_file EQ 'X'.
PERFORM help_local_file CHANGING p_source_path.
ENDIF.
ENDFORM. " help_input_file
*& Form help_asset_file
* text
FORM help_asset_file USING p_phys_file TYPE c
p_locl_file TYPE c
CHANGING p_source_path TYPE any.
IF p_phys_file EQ 'X'.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_AFILE'
dyname = sy-repid
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
ELSEIF p_locl_file EQ 'X'.
PERFORM help_local_file CHANGING p_source_path.
ENDIF.
ENDFORM. " help_asset_file
*& Form help_cost_file
* text
FORM help_cost_file USING p_phys_file TYPE c
p_locl_file TYPE c
CHANGING p_source_path TYPE any.
IF p_phys_file EQ 'X'.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_CFILE'
dyname = sy-repid
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
ELSEIF p_locl_file EQ 'X'.
PERFORM help_local_file CHANGING p_source_path.
ENDIF.
ENDFORM. " help_cost_file
*& Form help_depr_file
* text
FORM help_depr_file USING p_phys_file TYPE c
p_locl_file TYPE c
CHANGING p_source_path TYPE any.
IF p_phys_file EQ 'X'.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_DFILE'
dyname = sy-repid
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
ELSEIF p_locl_file EQ 'X'.
PERFORM help_local_file CHANGING p_source_path.
ENDIF.
ENDFORM. " help_depr_file
*& Form help_audit_file
* text
FORM help_audit_file USING p_phys_file TYPE c
p_locl_file TYPE c
CHANGING p_audit_path TYPE any.
IF p_phys_file EQ 'X'.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_OFILE'
dyname = sy-repid
dynumb = sy-dynnr
filetype = 'P'
location = 'A'.
ELSEIF p_locl_file EQ 'X'.
PERFORM help_local_file CHANGING p_audit_path.
ENDIF.
ENDFORM. " help_audit_file
*& Form help_local_file
* Local File Path
FORM help_local_file CHANGING p_path TYPE any .
DATA: lt_file_table TYPE filetable,
la_file_table LIKE LINE OF lt_file_table,
l_rc TYPE i,
l_pcdsn TYPE cffile-filename.
REFRESH lt_file_table.
CLEAR la_file_table.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = lt_file_table
rc = l_rc.
READ TABLE lt_file_table INTO la_file_table INDEX 1.
l_pcdsn = la_file_table-filename.
MOVE l_pcdsn TO p_path.
ENDFORM. " help_local_file
*& Form check_phys_file
* Validation of Physical File
FORM check_phys_file USING p_file TYPE any.
DATA: l_str(300) TYPE c.
CLEAR l_str.
OPEN DATASET p_file IN TEXT MODE FOR INPUT ENCODING DEFAULT.
IF sy-subrc <> 0.
IF g_file_flag = 'I'.
MESSAGE e000 WITH text-021.
ELSEIF g_file_flag = 'A'.
MESSAGE e000 WITH text-095.
ELSEIF g_file_flag = 'C'.
MESSAGE e000 WITH text-096.
ELSEIF g_file_flag = 'D'.
MESSAGE e000 WITH text-097.
ENDIF.
ENDIF.
READ DATASET p_file INTO l_str.
IF sy-subrc <> 0.
IF g_file_flag = 'I'.
MESSAGE e000 WITH text-017.
ELSEIF g_file_flag = 'A'.
MESSAGE e000 WITH text-098.
ELSEIF g_file_flag = 'C'.
MESSAGE e000 WITH text-099.
ELSEIF g_file_flag = 'D'.
MESSAGE e000 WITH text-100.
ENDIF.
ENDIF.
CLEAR: g_file_flag.
CLOSE DATASET p_file.
ENDFORM. " check_phys_file
*& Form check_local_file
* Validation of Local File
FORM check_local_file USING p_file TYPE any.
DATA: l_size TYPE i.
CLEAR: l_size.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
fname = p_file
IMPORTING
* exist = l_exist
filesize = l_size
EXCEPTIONS
fileinfo_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
IF g_file_flag = 'I'.
MESSAGE e000 WITH text-016.
ELSEIF g_file_flag = 'A'.
MESSAGE e000 WITH text-101.
ELSEIF g_file_flag = 'C'.
MESSAGE e000 WITH text-102.
ELSEIF g_file_flag = 'D'.
MESSAGE e000 WITH text-103.
ENDIF.
ENDIF.
IF l_size IS INITIAL.
IF g_file_flag = 'I'.
MESSAGE e000 WITH text-024.
ELSEIF g_file_flag = 'A'.
MESSAGE e000 WITH text-107.
ELSEIF g_file_flag = 'C'.
MESSAGE e000 WITH text-108.
ELSEIF g_file_flag = 'D'.
MESSAGE e000 WITH text-109.
ENDIF.
ENDIF.
CLEAR: g_file_flag.
ENDFORM. " check_local_file
*& Form get_input
* To gate input data from local file or from application server
FORM get_input USING p_ifilename TYPE any
p_afilename TYPE any
p_cfilename TYPE any
p_dfilename TYPE any
CHANGING p_input_table TYPE t_input_table
p_asset_table TYPE t_asset_table
p_cost_table TYPE t_cost_table
p_depr_table TYPE t_depr_table.
* to populate the input table
PERFORM upload_file USING p_ifilename CHANGING i_local.
g_file_flag = 'I'.
PERFORM split_localtable CHANGING p_input_table p_asset_table
p_cost_table p_depr_table.
CLEAR g_file_flag.
REFRESH i_local.
* to populate the asset class table
PERFORM upload_file USING p_afilename CHANGING i_local.
g_file_flag = 'A'.
PERFORM split_localtable CHANGING p_input_table p_asset_table
p_cost_table p_depr_table .
CLEAR g_file_flag.
REFRESH i_local.
* to populate the cost center table
PERFORM upload_file USING p_cfilename CHANGING i_local.
g_file_flag = 'C'.
PERFORM split_localtable CHANGING p_input_table p_asset_table
p_cost_table p_depr_table .
CLEAR g_file_flag.
REFRESH i_local.
* to populate the depr key table
PERFORM upload_file USING p_dfilename CHANGING i_local.
g_file_flag = 'D'.
PERFORM split_localtable CHANGING p_input_table p_asset_table
p_cost_table p_depr_table .
CLEAR g_file_flag.
REFRESH i_local.
ENDFORM. " get_input
*& Form upload_file
* text
FORM upload_file USING p_filename TYPE any
CHANGING p_local_table TYPE t_local_table.
* To get the input data from desktop file
IF p_locl = 'X'.
DATA: l_file TYPE string.
CLEAR: l_file,
p_local_table.
l_file = p_filename.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = p_local_table
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE e002 WITH l_file.
ENDIF.
ELSE.
* To get the data from application server file
OPEN DATASET p_filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
IF sy-subrc <> 0.
MESSAGE e001 WITH p_filename.
ENDIF.
CLEAR: wa_local.
DO.
READ DATASET p_filename INTO wa_local.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND wa_local TO p_local_table.
CLEAR: wa_local.
ENDDO.
CLOSE DATASET p_filename.
ENDIF.
ENDFORM. " upload_file
*& Form split_localtable
* text
FORM split_localtable CHANGING p_input_tab TYPE t_input_table
p_asset_tab TYPE t_asset_table
p_cost_tab TYPE t_cost_table
p_depr_tab TYPE t_depr_table.
DATA: l_cnt TYPE i.
CLEAR: l_cnt, wa_local.
LOOP AT i_local INTO wa_local.
REFRESH i_split[].
SPLIT wa_local AT c_tab INTO TABLE i_split.
CLEAR l_cnt.
ADD 1 TO l_cnt.
CLEAR wa_split.
LOOP AT i_split INTO wa_split.
IF g_file_flag = 'I'.
ASSIGN COMPONENT l_cnt OF STRUCTURE wa_input TO <fs_field>.
ELSEIF g_file_flag = 'A'.
ASSIGN COMPONENT l_cnt OF STRUCTURE wa_asset TO <fs_field>.
ELSEIF g_file_flag = 'C'.
ASSIGN COMPONENT l_cnt OF STRUCTURE wa_cost TO <fs_field>.
ELSEIF g_file_flag = 'D'.
ASSIGN COMPONENT l_cnt OF STRUCTURE wa_depr TO <fs_field>.
ENDIF.
CLEAR <fs_field>.
<fs_field> = wa_split-col.
ADD 1 TO l_cnt.
CLEAR wa_split.
ENDLOOP.
IF g_file_flag = 'I'.
APPEND wa_input TO p_input_tab.
CLEAR: wa_input .
ELSEIF g_file_flag = 'A'.
APPEND wa_asset TO p_asset_tab.
CLEAR: wa_asset .
ELSEIF g_file_flag = 'C'.
APPEND wa_cost TO p_cost_tab.
CLEAR: wa_cost .
ELSEIF g_file_flag = 'D'.
APPEND wa_depr TO p_depr_tab.
CLEAR: wa_depr .
ENDIF.
CLEAR: wa_local .
ENDLOOP.
ENDFORM. " split_localtable -
Why doesn't apple offer a viewer/file browser for iCloud Drive?
Why doesn't apple offer a viewer/file browser for iCloud Drive?
Dropbox, Microsoft’s OneDrive, and Google Drive all have viewer apps that let you see and manage what’s in the drive. The only way you can do that with iCloud Drive is through a web browser. Very frustrating and backward.I found a possible band-aid for our problem:
1) On iOS 8 Device, go to Safari / iCloud.com
2) Once you get to iCloud.com, you'll notice it won't give you the option to log in.
3) Tap on the URL bar (this should bring up your bookmarks bar and Frequently Visited Sites)
4) Tap, Hold, and Slide your finger down on that section (this will reveal two options: (1) Add to Favorites, and (2) Request Desktop Site
5) Tap Request Desktop Site
Log in as usual, and you can now access iCloud Drive with your PDFs and other documents like any other computer.
I too am disappointed as I was looking forward to view PDF's shared between my Macbook and my iPad, but I think this should work until Apple comes out with a solution. -
No Authorization To Upload Text file for a Variable
Hi Experts,
I am trying to upload a text file from Multiple Selection screen of a Query in Business Explorer and it gives the error message of 'No Upload Authorization'
An additional Information: I could able to Upload the text file when we were in SP17. Its recently upgraded to SP 21. Does this Upgradation of service pack has any Impact on this??
An idea about this error, PLEASE ?
Many Thanks in Advance.
Cheers,
KrishnaHi Panagiotis,
Have a look into the Portal Desktop link below.
http://help.sap.com/saphelp_nw70/helpdata/EN/ac/dc4f3eeb684212e10000000a11405a/frameset.htm
Somewhere mid section, you will find Portal Favourites (http://help.sap.com/saphelp_nw70/helpdata/EN/3a/d609e5803111d5992f00508b6b8b11/frameset.htm).
Make sure that Knowledge Management is installed on your system and that you have activated the Add to Portal Favorites property (this entry is displayed in the options menu of your page title bar).
http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/a30a48887d4cb690b4f1754f651ba1/frameset.htm
If all above if set, then checkout the needed activities within the Portal Favourite iview setting.
http://help.sap.com/saphelp_nw70/helpdata/EN/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
Checkout on both the page title bar Options menu and the context menu of the Detailed Navigation iView display an Add to Portal Favorites item, allowing users to store links to favorites (thats where I believe your missing permission).
The Portal Favorites iView is part of the Knowledge Management installation and is integrated into the portal. Thus if the above steps are done and the settings activated, then your standard user should not see error in the Portal Favourites with the role that you have already assigned to the user.
Also look into Standard User (eu_role), which basic functionality (portal personalization iViews) for the core portal platform and default content for the Knowledge Management and Collaboration capabilities of SAP NetWeaver. By default, the Everyone group in the portal is assigned to this role.
http://help.sap.com/saphelp_nw70/helpdata/EN/47/f0f7415e639c39e10000000a155106/frameset.htm
Hope that helps.
Ray -
Error while uploading text file....
Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
ramaHalo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr20 like qmfe-/itml/usr20,
end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr21 like qmfe-/itml/usr21,
end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr19 like qmfe-/itml/usr19,
end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr07 like qmfe-/itml/usr07,
end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
gs2_qmfe like line of gt2_qmfe,
gs3_qmfe like line of gt3_qmfe,
gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
ls_lines2 type i,
ls_lines3 type i,
ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
<fs2> like gs2_qmfe,
<fs3> like gs3_qmfe,
<fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file2
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file3
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file4
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
where qmnum = <fs1>-qmnum
and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe -
Upload text file from PC to table control
Hi Experts,
I realize that this question was posted many times in SDN, but I am not able to find a clear answer. I have uploaded the file into internal table using GUI_UPLOAD function module (PAI module - MODULE UPLOAD_FROM_PC - I have created a push button using screen painter and included the logic based of fcode). Now, I want to append this internal table to the internal table linked to the table control. But I am not able to find the internal table which is linked to the table control. The EXTRACT is not an internal table. So, could you tell me how I could accomplish this logic.
PROCESS BEFORE OUTPUT.
MODULE LISTE_INITIALISIEREN.
LOOP AT EXTRACT WITH CONTROL TCTRL_ZKK_EXAMPLE1 CURSOR NEXTLINE.
MODULE LISTE_SHOW_LISTE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE LISTE_EXIT_COMMAND AT EXIT-COMMAND.
MODULE LISTE_BEFORE_LOOP.
LOOP AT EXTRACT.
MODULE LISTE_INIT_WORKAREA.
CHAIN.
FIELD ZKK_EXAMPLE1-ANLKL .
MODULE SET_UPDATE_FLAG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD VIM_MARKED MODULE LISTE_MARK_CHECKBOX.
CHAIN.
FIELD ZKK_EXAMPLE1-ANLKL .
MODULE LISTE_UPDATE_LISTE.
ENDCHAIN.
ENDLOOP.
MODULE UPLOAD_FROM_PC.
MODULE LISTE_AFTER_LOOP.
Thanks
SriHi
First of all convert excel or text file into tabular format
(meanse same as we use in BDC).
here table I_EXCL structure is same as your table control structure.
for ex.
yr table control structure is
u can write down this coding in yr button press event.
data:begin of extract occurs 0,
matnr like matnr,
maktx like maktx,
end of extract.
data:i_excl like extract occurs 0 with header line.
GET THE FILE PATH
DATA:W_FILENAME LIKE RLGRAP-FILENAME.
CLEAR:W_FILENAME,extract[].
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
CHANGING
FILE_NAME = W_FILENAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF W_FILENAME IS NOT INITIAL.
CONVERT EXCEL FILE INTO INTERNAL TABLE
CLEAR:I_EXCL.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = W_FILENAME
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = I_EXCL
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
After this in PBO module u can write
process before output
MODULE TAB_ENTRY_CHANGE_TC_ATTR.
MODULE TAB_ENTRY_CHANGE_TC_ATTR.
loop at i_excl.
extract-matnr = i_excl-matnr.
extract-maktx = i_excl-maktx.
append extract.
endloop.
endmodule.
I hope this is helpfull to solve yr problem.
Edited by: Pavan Gajjar on Mar 26, 2008 9:57 AM -
Webutil - issue with uploading text files with client_get_file_name
Hi,
I'm using webutil client_get_file_name to upload files from the client machine to the server.
It works fine for xls,pdf,doc files etc. but not for txt files it seems.
It doesn't display any error at all either.
Has anyone seen this type of issue before?
Kind regards,
Tom
Windows XP
Forms v10.1.2.0.2Hi Sarah et al,
The code that I'm using to upload any file type format is:
vfilename := client_get_file_name('c:\',file_filter => 'All files (*.*)');
it works for doc/pdf/xls/rtf/csv etc.
but not for text files i.e. .txt
Also, could someone tell me how to open a .msg (Outlook message) file
as it gives the output:
'Cannot read item' upon the opening of the Outlook application.
I'm using the following to try and open it:
CLIENT_HOST( 'cmd /C start '||p_filename);
Your help would be appreciated.
Kind regards,
Tom -
Corruption in text files retrieved through Adobe Drive on Mac
I am running an OpenCMIS based CMIS server on Mac. When viewing text files retrieved from the CMIS repository through Adobe Drive, there is nontextual content appearing at the end of the file. XCode, for example, ends up displaying this content as a variable number of '¿' characters. This is not just a visual problem as file comparisons between a file retrieved through Adobe Drive and the same file retrieved through other means detect the files as being different.
This is only happening with text files. Binary comparison of nontext files retrieved through Adobe Drive and files retrieved through other means detect the files identical.
This only occurs when the CMIS server is running on a Mac and Adobe Drive is running on a Mac. Adove Drive running on a Windows machine and connecting to this same CMIS server does not have this problem and vice versa.
This problem does not occur if I retrieve files through other CMIS clients.
Any help/resolution you could offer on this issue would be appreciated.Having same issue. Using Indesign CC 2014.2 update, OS X 10.10.3 and any server using a smb, afp, or cifs connection.
Maybe you are looking for
-
how do i transfer my purchases from one windows pc to another without having access to the pc with the music on it , as it is broken ?
-
How to pair new Magic mouse w desktop? Old mouse is dead.
How do I get my new Magic Mouse to pair w my old 2007 iMac? I don't have the old Mouse; when I bought the new one at the Apple Store they said they'd throw the old one away. So I gave it to them.
-
Hey everyone, I am getting an error message while creating a Purchase Order which says " Purchase order still contains faulty items'' with error message no MEPo000. But there is no further information. Also I am getting an error message which says '
-
Avoid positive commissions for a bilateral facility
Dear gurus: I'm new in FSCM world and I am facing the following problem: In a bilateral facility product (obtained) I've defined a charge for the "amount utilized". It doesn't work when the company makes a transfer bigger than the amount utilized to
-
Movie rental not playing.
I rented "once" on itunes. It payed for it, downloaded and put it in my library. It even started the 24 hr countdown, but instead of playing it, it just crashes my computer. All of the movies I've purchased work on my computer, only the ne that I've