Uploading the data from Application server to Database
Hi,
I am trying to upload tab delimited file from application server into database.
I have upload the file from presentation to application server by CGZ3
and i am able to see file in app server with #s and it appers in application server as
10140#A#E#120#abcd#
10146#M#P#300#a.b#
10152#M#P#200#dat123.com##
140#A#P#300#blicksat123.com#
10140#A#E#260#cust1at123.com##
And my notepad records looks like
10140 A E 120 abcd
10146 M P 300 a.b
10152 M P 200 dat123.com
140 A P 300 blicksat123.com
10140 A E 260 cust1at123.com
I am using open data set and read dataset to read the file as shown below
DATA:
l_htab TYPE c, " Horizontal tab
l_line(100) TYPE c. " Content in the file
l_htab = cl_abap_char_utilities=>horizontal_tab.
Open dataset
OPEN DATASET pp_afname FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
DO.
Read dataset
READ DATASET pp_afname INTO l_line.
IF sy-subrc EQ 0.
SPLIT l_line AT l_htab
INTO fs_file-carrid
fs_file-autoind
fs_file-commtype
fs_file-resptime
fs_file-smtpaddr.
APPEND fs_file TO pt_afile.
ELSE.
EXIT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDDO. " DO.
CLOSE DATASET pp_afname.
ELSE.
MESSAGE 'Problem in opening the App.Server file' TYPE con_msgtyp_i.
ENDIF. " IF sy-subrc EQ 0.
Load the data to the database
PERFORM load_data_to_database USING t_afile.
When i am trying to upload it is taking me to dump and the errpr analysis is like
"The program attempted to interpret the value "26 0 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible."
Any suggestions on this
Regards
VEnk@
Hi,
Thats the line feed character. After reading the application server file, use this
data: lv_feed type c value CL_ABAP_CHAR_UTILITIES=>CR_LF.
loop at itab.
replace all occurrences of lv_feed in itab-field with space.
modify itab.
endloop.
Vikranth
Similar Messages
-
Need Sample code to upload the data to Application Server
Hi ,
I need to upload the data to application server.
The output should be an XML file.
Can anybody send me sample code for this.
Reward points are assured.
Best Regards
Bhagat.may be this code wil help ,first to downjload the XML fine -
1)
REPORT zhr_test2_tk.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_position TYPE REF TO if_ixml_element,
l_element_title TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_erec TYPE TABLE OF hrp5126,
l_erec TYPE hrp5126.
DATA: date(10),
time(4),
filepath TYPE string.
CONSTANTS: filedir TYPE string VALUE 'C:\tmp\',
filename TYPE string VALUE 'ZHR_test'.
START-OF-SELECTION.
fill internal table
SELECT * FROM hrp5126 INTO TABLE lt_erec.
Start filling xml DOM object from internal table lt_erec.
LOOP AT lt_erec INTO l_erec.
*Create the root node 'position'
IF sy-tabix EQ 1.
create an ixml factory
l_ixml = cl_ixml=>create( ).
create Document Object Model
l_document = l_ixml->create_document( ).
Fill root node with value 'position'
l_element_position = l_document->create_simple_element(
name = 'position'
parent = l_document ).
ENDIF.
IF sy-tabix GT 1.
create element jobtitle as child of position
l_value = l_erec-jobtitle.
l_element_title = l_document->create_simple_element(
name = 'job_title'
parent = l_element_position
value = l_value ).
l_value = l_erec-empl_start_date.
l_element_dummy = l_document->create_simple_element(
name = 'StartDate'
parent = l_element_title
value = l_value ).
l_value = l_erec-empl_end_date.
l_element_dummy = l_document->create_simple_element(
name = 'EndDate'
parent = l_element_title
value = l_value ).
ENDIF.
ENDLOOP.
IF sy-subrc NE 0.
WRITE: 'No data in table hrp5125'.
ENDIF.
create a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
connect internal XML table to streamfactory
l_ostream = l_streamfactory->create_ostream_itable(
table = l_xml_table ).
render the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
Get time and date
WRITE sy-uzeit2(2) TO time2(2).
WRITE sy-uzeit0(2) TO time0(2).
WRITE sy-datum4(2) TO date0(2).
WRITE sy-datum6(2) TO date2(2).
WRITE sy-datum0(4) TO date4(4).
*Build filename with date and time reference
CONCATENATE filedir filename date time '.xml' INTO filepath.
<i>* This is the code I hope to modify in order to save the xml structure on the application server, with a specified filepath.</i>
<b> OPEN DATASET filepath FOR OUTPUT IN BINARY MODE.
LOOP AT lt_erec into l_erec.
TRANSFER l_erec TO filepath.
ENDLOOP.
CLOSE DATASET filepath.</b>
save XML document
l_xml_size = l_ostream->get_num_written_raw( ).
*This is the code for download to local computer
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = filepath
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
2) uploading tht PC XML file to APPliaction server -
DATA rec like QISRS_XML_LINE.
OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT l_xml_table into rec.
TRANSFER rec TO filepath.
ENDLOOP.
CLOSE DATASET filepath. -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant -
Uploading the data to application server
Hi,
I have created a report.In the selection screen I have created 2 check boxes(screen,server).If I click on the screen check box the o/p should be displayed on the screen.If I click on the server checkbox the o/p should be sent to the application server.How can I send the data to application server?
Regards,
HemaHi Hema,
Since the location that you have mentioned is some outside the systema nd no the Application Server,this third party location can be done only when there is some other T-code that has been integrated with the system.
If in case,you want to send the data to the Presentation server when you clikc on the Checkbox for it, and else,it should save it on the Applicaton server ,the code is mentioned below:
*& Report ZHYPERION *
*& Project : SubSea7
Created on : 07/02/2007
Created by : Puneet Jhari.
*& Purpose : For SAP Interface download Hyperion.
REPORT zhyperion NO STANDARD PAGE HEADING MESSAGE-ID zhyper.
Start of Data Declaration
TYPE-POOLS : truxs,vrm.
TABLES : glpct,cepc.
DATA : var TYPE i,
total TYPE f.
DATA : BEGIN OF wa2,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa2.
DATA : BEGIN OF wa3,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa3.
DATA : BEGIN OF wa4,
racct LIKE glpct-racct,
END OF wa4.
DATA : BEGIN OF wa5,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa5.
DATA : BEGIN OF wa9,
khinr LIKE cepc-khinr,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa9.
DATA : BEGIN OF wa6,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa6.
DATA : BEGIN OF wa7,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa7.
DATA : itab3 LIKE TABLE OF wa2,
itab4 LIKE TABLE OF wa3,
itab5 LIKE TABLE OF wa4 WITH HEADER LINE,
itab6 LIKE TABLE OF wa5 WITH HEADER LINE,
itab7 LIKE TABLE OF wa6,
itab8 LIKE TABLE OF wa7,
itab10 LIKE TABLE OF wa9.
DATA : flag(1) TYPE c,
temp(6) TYPE c.
DATA : itab2 TYPE truxs_t_text_data,
itab9 TYPE truxs_t_text_data WITH HEADER LINE.
DATA : name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list,
FILNAM11 TYPE STRING,
FILNAM21 TYPE STRING.
End of Data Declaration
Begin of Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: r1 DEFAULT 'X' RADIOBUTTON GROUP g1 USER-COMMAND rad1,
r2 RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS: rbukrs1 TYPE glpct-rbukrs MODIF ID ful,
khinr1 TYPE cepc-khinr AS LISTBOX VISIBLE LENGTH 20
MODIF ID sam ,
ryear1 TYPE glpct-ryear MODIF ID ful,
ryear2 TYPE glpct-ryear MODIF ID sam,
rpmax1 TYPE i MODIF ID ful,
rpmax2 TYPE i MODIF ID sam,
filnam1 TYPE rlgrap-filename MODIF ID ful,
filnam2 TYPE RLGRAP-FILENAME MODIF ID sam.
SELECTION-SCREEN END OF BLOCK b3.
End of Selection Screen
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM populate. "For populating the drop-down list.
CLEAR VALUE.
REFRESH LIST.
NAME = 'KHINR1'.
VALUE-KEY = '1S7_NOCASV'.
VALUE-TEXT = '1S7_NOCASV'.
APPEND VALUE TO LIST.
VALUE-KEY = '1S7_NOCJOT'.
VALUE-TEXT = '1S7_NOCJOT'.
APPEND VALUE TO LIST.
LOOP AT SCREEN. "For toggling between the selection screens.
IF r1 EQ 'X'.
IF screen-group1 = 'SAM'.
screen-active = 0.
ENDIF.
ELSEIF r2 EQ 'X'.
IF screen-group1 = 'FUL'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
For the Drop-Down Listbox
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Begin of Data Selection
START-OF-SELECTION.
When Company Code radio button is selected.
IF r1 EQ 'X'. "If Company Code radio button is selected.
IF rbukrs1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM1 TO FILNAM11.
CASE rpmax1.
WHEN '01'.
SELECT ryear rbukrs racct ksl01
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '02'.
SELECT ryear rbukrs racct ksl02
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '03'.
SELECT ryear rbukrs racct ksl03
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '04'.
SELECT ryear rbukrs racct ksl04
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '05'.
SELECT ryear rbukrs racct ksl05
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '06'.
SELECT ryear rbukrs racct ksl06
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '07'.
SELECT ryear rbukrs racct ksl07
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '08'.
SELECT ryear rbukrs racct ksl08
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '09'.
SELECT ryear rbukrs racct ksl09
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '10'.
SELECT ryear rbukrs racct ksl10
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '11'.
SELECT ryear rbukrs racct ksl11
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '12'.
SELECT ryear rbukrs racct ksl12
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '13'.
SELECT ryear rbukrs racct ksl13
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '14'.
SELECT ryear rbukrs racct ksl14
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '15'.
SELECT ryear rbukrs racct ksl15
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '16'.
SELECT ryear rbukrs racct ksl16
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
ENDCASE.
MOVE itab3 TO itab4.
LOOP AT itab3 INTO wa2.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa2-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab4 INTO wa3.
IF wa2-rbukrs EQ wa3-rbukrs AND wa2-racct EQ wa3-racct AND
wa2-ryear EQ wa3-ryear.
total = total + wa3-ksl01.
ENDIF.
ENDLOOP.
wa5-rbukrs = wa2-rbukrs.
wa5-racct = wa2-racct+4(6).
wa5-total1 = total.
APPEND wa5 TO itab6.
CLEAR total.
APPEND wa2-racct TO itab5.
ENDLOOP.
If no data is available corresponding to the values entered.
IF itab6[] IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab6
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam1 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam1.
ENDLOOP.
CLOSE DATASET filnam1.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM11
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When Region radio button is selected.
ELSEIF r2 EQ 'X'.
IF khinr1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM2 TO FILNAM21.
CASE rpmax2.
WHEN '01'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl01
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '02'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl02
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '03'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl03
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '04'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl04
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '05'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl05
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '06'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl06
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '07'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl07
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '08'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl08
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '09'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl09
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '10'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl10
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '11'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl11
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '12'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl12
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '13'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl13
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '14'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl14
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '15'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl15
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '16'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl16
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
ENDCASE.
MOVE itab7 TO itab8.
LOOP AT itab7 INTO wa6.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa6-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab8 INTO wa7.
IF wa6-rbukrs EQ wa7-rbukrs AND wa6-racct EQ wa7-racct AND
wa6-ryear EQ wa7-ryear.
total = total + wa7-ksl01.
ENDIF.
ENDLOOP.
wa9-khinr = khinr1.
wa9-racct = wa6-racct+4(6).
wa9-total1 = total.
APPEND wa9 TO itab10.
CLEAR total.
APPEND wa6-racct TO itab5.
ENDLOOP.
*If no data is available corresponding to the values entered.
IF itab10 IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab10
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam2 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam2.
ENDLOOP.
CLOSE DATASET filnam2.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM21
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form POPULATE
text
FORM populate.
CLEAR value.
REFRESH list.
name = 'KHINR1'.
value-key = '1S7_SUBSEA'.
value-text = '1S7_SUBSEA'.
APPEND value TO list.
value-key = '1S7_GEN'.
value-text = '1S7_GEN'.
APPEND value TO list.
value-key = '1S7'.
value-text = '1S7'.
APPEND value TO list.
value-key = '1S7_CORPTP'.
value-text = '1S7_CORPTP'.
APPEND value TO list.
value-key = '1S7_BRRE'.
value-text = '1S7_BRRE'.
APPEND value TO list.
value-key = '1S7_BRCON'.
value-text = '1S7_BRCON'.
APPEND value TO list.
value-key = '1S7_BRCJOB'.
value-text = '1S7_BRCJOB'.
APPEND value TO list.
value-key = '1S7_BRCJBU'.
value-text = '1S7_BRCJBU'.
APPEND value TO list.
value-key = '1S7_BRCJCO'.
value-text = '1S7_BRCJCO'.
APPEND value TO list.
value-key = '1S7_BRCJIR'.
value-text = '1S7_BRCJIR'.
APPEND value TO list.
value-key = '1S7_BRCJEN'.
value-text = '1S7_BRCJEN'.
APPEND value TO list.
value-key = '1S7_BRCJPI'.
value-text = '1S7_BRCJPI'.
APPEND value TO list.
value-key = '1S7_BRCJSU'.
value-text = '1S7_BRCJSU'.
APPEND value TO list.
value-key = '1S7_BRCJFL'.
value-text = '1S7_BRCJFL'.
APPEND value TO list.
value-key = '1S7_BRCJOT'.
value-text = '1S7_BRCJOT'.
APPEND value TO list.
value-key = '1S7_BRCASV'.
value-text = '1S7_BRCASV'.
APPEND value TO list.
value-key = '1S7_BRCASE'.
value-text = '1S7_BRCASE'.
APPEND value TO list.
value-key = '1S7_BRCOOC'.
value-text = '1S7_BRCOOC'.
APPEND value TO list.
value-key = '1S7_BRCOHD'.
value-text = '1S7_BRCOHD'.
APPEND value TO list.
value-key = '1S7_BRCGEN'.
value-text = '1S7_BRCGEN'.
APPEND value TO list.
value-key = '1S7_BRDRI'.
value-text = '1S7_BRDRI'.
APPEND value TO list.
value-key = '1S7_BRDJOB'.
value-text = '1S7_BRDJOB'.
APPEND value TO list.
value-key = '1S7_BRDASV'.
value-text = '1S7_BRDASV'.
APPEND value TO list.
value-key = '1S7_BRDASE'.
value-text = '1S7_BRDASE'.
APPEND value TO list.
value-key = '1S7_BRDAEW'.
value-text = '1S7_BRDAEW'.
APPEND value TO list.
value-key = '1S7_BRDAEO'.
value-text = '1S7_BRDAEO'.
APPEND value TO list.
value-key = '1S7_BRDAET'.
value-text = '1S7_BRDAET'.
APPEND value TO list.
value-key = '1S7_BRDOOC'.
value-text = '1S7_BRDOOC'.
APPEND value TO list.
value-key = '1S7_BRDOHD'.
value-text = '1S7_BRDOHD'.
APPEND value TO list.
value-key = '1S7_BRVER'.
value-text = '1S7_BRVER'.
APPEND value TO list.
value-key = '1S7_BRVJOB'.
value-text = '1S7_BRVJOB'.
APPEND value TO list.
value-key = '1S7_BRVASV'.
value-text = '1S7_BRVASV'.
APPEND value TO list.
value-key = '1S7_BRVASE'.
value-text = '1S7_BRVASE'.
APPEND value TO list.
value-key = '1S7_BRVOOC'.
value-text = '1S7_BRVOOC'.
APPEND value TO list.
value-key = '1S7_BRVOHD'.
value-text = '1S7_BRVOHD'.
APPEND value TO list.
value-key = '1S7_UKRE'.
value-text = '1S7_UKRE'.
APPEND value TO list.
value-key = '1S7_UKCON'.
value-text = '1S7_UKCON'.
APPEND value TO list.
value-key = '1S7_UKCJOB'.
value-text = '1S7_UKCJOB'.
APPEND value TO list.
value-key = '1S7_UKCJBU'.
value-text = '1S7_UKCJBU'.
APPEND value TO list.
value-key = '1S7_UKCJCO'.
value-text = '1S7_UKCJCO'.
APPEND value TO list.
value-key = '1S7_UKCJIR'.
value-text = '1S7_UKCJIR'.
APPEND value TO list.
value-key = '1S7_UKCJEN'.
value-text = '1S7_UKCJEN'.
APPEND value TO list.
value-key = '1S7_UKCJPI'.
value-text = '1S7_UKCJPI'.
APPEND value TO list.
value-key = '1S7_UKCJSU'.
value-text = '1S7_UKCJSU'.
APPEND value TO list.
value-key = '1S7_UKCJFL'.
value-text = '1S7_UKCJFL'.
APPEND value TO list.
value-key = '1S7_UKCJOT'.
value-text = '1S7_UKCJOT'.
APPEND value TO list.
value-key = '1S7_UKCASV'.
value-text = '1S7_UKCASV'.
APPEND value TO list.
value-key = '1S7_UKCASE'.
value-text = '1S7_UKCASE'.
APPEND value TO list.
value-key = '1S7_UKCOOC'.
value-text = '1S7_UKCOOC'.
APPEND value TO list.
value-key = '1S7_UKBA'.
value-text = '1S7_UKBA'.
APPEND value TO list.
value-key = '1S7_UKBATE'.
value-text = '1S7_UKBATE'.
APPEND value TO list.
value-key = '1S7_UKCOHD'.
value-text = '1S7_UKCOHD'.
APPEND value TO list.
value-key = '1S7_UKCGEN'.
value-text = '1S7_UKCGEN'.
APPEND value TO list.
value-key = '1S7_UKDRI'.
value-text = '1S7_UKDRI'.
APPEND value TO list.
value-key = '1S7_UKDJOB'.
value-text = '1S7_UKDJOB'.
APPEND value TO list.
value-key = '1S7_UKDASV'.
value-text = '1S7_UKDASV'.
APPEND value TO list.
value-key = '1S7_UKDASE'.
value-text = '1S7_UKDASE'.
APPEND value TO list.
value-key = '1S7_UKDAEW'.
value-text = '1S7_UKDAEW'.
APPEND value TO list.
value-key = '1S7_UKDAEO'.
value-text = '1S7_UKDAEO'.
APPEND value TO list.
value-key = '1S7_UKDAET'.
value-text = '1S7_UKDAET'.
APPEND value TO list.
value-key = '1S7_UKDOOC'.
value-text = '1S7_UKDOOC'.
APPEND value TO list.
value-key = '1S7_UKDOHD'.
value-text = '1S7_UKDOHD'.
APPEND value TO list.
value-key = '1S7_UKVER'.
value-text = '1S7_UKVER'.
APPEND value TO list.
value-key = '1S7_UKVJOB'.
value-text = '1S7_UKVJOB'.
APPEND value TO list.
value-key = '1S7_UKVASV'.
value-text = '1S7_UKVASV'.
APPEND value TO list.
value-key = '1S7_UKVASE'.
value-text = '1S7_UKVASE'.
APPEND value TO list.
value-key = '1S7_UKVOOC'.
value-text = '1S7_UKVOOC'.
APPEND value TO list.
value-key = '1S7_UKVOHD'.
value-text = '1S7_UKVOHD'.
APPEND value TO list.
value-key = '1S7_NORE'.
value-text = '1S7_NORE'.
APPEND value TO list.
value-key = '1S7_NOCON'.
value-text = '1S7_NOCON'.
APPEND value TO list.
value-key = '1S7_NOCJOB'.
value-text = '1S7_NOCJOB'.
APPEND value TO list.
value-key = '1S7_NOCJBU'.
value-text = '1S7_NOCJBU'.
APPEND value TO list.
value-key = '1S7_NOCJCO'.
value-text = '1S7_NOCJCO'.
APPEND value TO list.
value-key = '1S7_NOCJIR'.
value-text = '1S7_NOCJIR'.
APPEND value TO list.
value-key = '1S7_NOCJEN'.
value-text = '1S7_NOCJEN'.
APPEND value TO list.
value-key = '1S7_NOCJPI'.
value-text = '1S7_NOCJPI'.
APPEND value TO list.
value-key = '1S7_NOCJSU'.
value-text = '1S7_NOCJSU'.
APPEND value TO list.
value-key = '1S7_NOCJFL'.
value-text = '1S7_NOCJFL'.
APPEND value TO list.
value-key = '1S7_NOCJOT'.
value-text = '1S7_NOCJOT'.
APPEND value TO list.
value-key = '1S7_NOCASV'.
value-text = '1S7_NOCASV'.
APPEND value TO list.
value-key = '1S7_NOCASE'.
value-text = '1S7_NOCASE'.
APPEND value TO list.
value-key = '1S7_NOCOOC'.
value-text = '1S7_NOCOOC'.
APPEND value TO list.
value-key = '1S7_NOCOHD'.
value-text = '1S7_NOCOHD'.
APPEND value TO list.
value-key = '1S7_NOCGEN'.
value-text = '1S7_NOCGEN'.
APPEND value TO list.
value-key = '1S7_NODRI'.
value-text = '1S7_NODRI'.
APPEND value TO list.
value-key = '1S7_NODJOB'.
value-text = '1S7_NODJOB'.
APPEND value TO list.
value-key = '1S7_NODASV'.
value-text = '1S7_NODASV'.
APPEND value TO list.
value-key = '1S7_NODASE'.
value-text = '1S7_NODASE'.
APPEND value TO list.
value-key = '1S7_NODAEW'.
value-text = '1S7_NODAEW'.
APPEND value TO list.
value-key = '1S7_NODAEO'.
value-text = '1S7_NODAEO'.
APPEND value TO list.
value-key = '1S7_NODAET'.
value-text = '1S7_NODAET'.
APPEND value TO list.
value-key = '1S7_NODOOC'.
value-text = '1S7_NODOOC'.
APPEND value TO list.
value-key = '1S7_NODOHD'.
value-text = '1S7_NODOHD'.
APPEND value TO list.
value-key = '1S7_NOVER'.
value-text = '1S7_NOVER'.
APPEND value TO list.
value-key = '1S7_NOVJOB'.
value-text = '1S7_NOVJOB'.
APPEND value TO list.
value-key = '1S7_NOVASV'.
value-text = '1S7_NOVASV'.
APPEND value TO list.
value-key = '1S7_NOVASE'.
value-text = '1S7_NOVASE'.
APPEND value TO list.
value-key = '1S7_NOVOOC'.
value-text = '1S7_NOVOOC'.
APPEND value TO list.
value-key = '1S7_NOVOHD'.
value-text = '1S7_NOVOHD'.
APPEND value TO list.
value-key = '1S7_GORE'.
value-text = '1S7_GORE'.
APPEND value TO list.
value-key = '1S7_GOCON'.
value-text = '1S7_GOCON'.
APPEND value TO list.
value-key = '1S7_GOCJOB'.
value-text = '1S7_GOCJOB'.
APPEND value TO list.
value-key = '1S7_GOCJBU'.
value-text = '1S7_GOCJBU'.
APPEND value TO list.
value-key = '1S7_GOCJCO'.
value-text = '1S7_GOCJCO'.
APPEND value TO list.
value-key = '1S7_GOCJIR'.
value-text = '1S7_GOCJIR'.
APPEND value TO list.
value-key = '1S7_GOCJEN'.
value-text = '1S7_GOCJEN'.
APPEND value TO list.
value-key = '1S7_GOCJPI'.
value-text = '1S7_GOCJPI'.
APPEND value TO list.
value-key = '1S7_GOCJSU'.
value-text = '1S7_GOCJSU'.
APPEND value TO list.
value-key = '1S7_GOCJFL'.
value-text = '1S7_GOCJFL'.
APPEND value TO list.
value-key = '1S7_GOCJOT'.
value-text = '1S7_GOCJOT'.
APPEND value TO list.
value-key = '1S7_GOCASV'.
value-text = '1S7_GOCASV'.
APPEND value TO list.
value-key = '1S7_GOCASE'.
value-text = '1S7_GOCASE'.
APPEND value TO list.
value-key = '1S7_GOCOOC'.
value-text = '1S7_GOCOOC'.
APPEND value TO list.
value-key = '1S7_GOCOHD'.
value-text = '1S7_GOCOHD'.
APPEND value TO list.
value-key = '1S7_GOCGEN'.
value-text = '1S7_GOCGEN'.
APPEND value TO list.
value-key = '1S7_GODRI'.
value-text = '1S7_GODRI'.
APPEND value TO list.
value-key = '1S7_GODJOB'.
value-text = '1S7_GODJOB'.
APPEND value TO list.
value-key = '1S7_GODASV'.
value-text = '1S7_GODASV'.
APPEND value TO list.
value-key = '1S7_GODASE'.
value-text = '1S7_GODASE'.
APPEND value TO list.
value-key = '1S7_GODAEW'.
value-text = '1S7_GODAEW'.
APPEND value TO list.
value-key = '1S7_GODAEO'.
value-text = '1S7_GODAEO'.
APPEND value TO list.
value-key = '1S7_GODAET'.
value-text = '1S7_GODAET'.
APPEND value TO list.
value-key = '1S7_GODOOC'.
value-text = '1S7_GODOOC'.
APPEND value TO list.
value-key = '1S7_GODOHD'.
value-text = '1S7_GODOHD'.
APPEND value TO list.
value-key = '1S7_GOVER'.
value-text = '1S7_GOVER'.
APPEND value TO list.
value-key = '1S7_GOVJOB'.
value-text = '1S7_GOVJOB'.
APPEND value TO list.
value-key = '1S7_GOVASV'.
value-text = '1S7_GOVASV'.
APPEND value TO list.
value-key = '1S7_GOVASE'.
value-text = '1S7_GOVASE'.
APPEND value TO list.
value-key = '1S7_GOVOOC'.
value-text = '1S7_GOVOOC'.
APPEND value TO list.
value-key = '1S7_GOVOHD'.
value-text = '1S7_GOVOHD'.
APPEND value TO list.
value-key = '1S7_GVRE'.
value-text = '1S7_GVRE'.
APPEND value TO list.
value-key = '1S7_GVCON'.
value-text = '1S7_GVCON'.
APPEND value TO list.
value-key = '1S7_GVCJOB'.
value-text = '1S7_GVCJOB'.
APPEND value TO list.
value-key = '1S7_GVCJBU'.
value-text = '1S7_GVCJBU'.
APPEND value TO list.
value-key = '1S7_GVCJCO'.
value-text = '1S7_GVCJCO'.
APPEND value TO list.
value-key = '1S7_GVCJIR'.
value-text = '1S7_GVCJIR'.
APPEND value TO list.
value-key = '1S7_GVCJEN'.
value-text = '1S7_GVCJEN'.
APPEND value TO list.
value-key = '1S7_GVCJPI'.
value-text = '1S7_GVCJPI'.
APPEND value TO list.
value-key = '1S7_GVCJSU'.
value-text = '1S7_GVCJSU'.
APPEND value TO list.
value-key = '1S7_GVCJFL'.
value-text = '1S7_GVCJFL'.
APPEND value TO list.
value-key = '1S7_GVCJOT'.
value-text = '1S7_GVCJOT'.
APPEND value TO list.
value-key = '1S7_GVCASV'.
value-text = '1S7_GVCASV'.
APPEND value TO list.
value-key = '1S7_GVCASE'.
value-text = '1S7_GVCASE'.
APPEND value TO list.
value-key = '1S7_GVCOOC'.
value-text = '1S7_GVCOOC'.
APPEND value TO list.
value-key = '1S7_GVCOHD'.
value-text = '1S7_GVCOHD'.
APPEND value TO list.
value-key = '1S7_GVCGEN'.
value-text = '1S7_GVCGEN'.
APPEND value TO list.
value-key = '1S7_GVDRI'.
value-text = '1S7_GVDRI'.
APPEND value TO list.
value-key = '1S7_GVDJOB'.
value-text = '1S7_GVDJOB'.
APPEND value TO list.
value-key = '1S7_GVDASV'.
value-text = '1S7_GVDASV'.
APPEND value TO list.
value-key = '1S7_GVDASE'.
value-text = '1S7_GVDASE'.
APPEND value TO list.
value-key = '1S7_GVDOOC'.
value-text = '1S7_GVDOOC'.
APPEND value TO list.
value-key = '1S7_GVDOHD'.
value-text = '1S7_GVDOHD'.
APPEND value TO list.
value-key = '1S7_GVVER'.
value-text = '1S7_GVVER'.
APPEND value TO list.
value-key = '1S7_GVVJOB'.
value-text = '1S7_GVVJOB'.
APPEND value TO list.
value-key = '1S7_GVVASV'.
value-text = '1S7_GVVASV'.
APPEND value TO list.
value-key = '1S7_GVVASE'.
value-text = '1S7_GVVASE'.
APPEND value TO list.
value-key = '1S7_GVVOOC'.
value-text = '1S7_GVVOOC'.
APPEND value TO list.
value-key = '1S7_GVVOHD'.
value-text = '1S7_GVVOHD'.
APPEND value TO list.
value-key = '1S7_GCRE'.
value-text = '1S7_GCRE'.
APPEND value TO list.
value-key = '1S7_GCCON'.
value-text = '1S7_GCCON'.
APPEND value TO list.
value-key = '1S7_GCCJOB'.
value-text = '1S7_GCCJOB'.
APPEND value TO list.
value-key = '1S7_GCCJBU'.
value-text = '1S7_GCCJBU'.
APPEND value TO list.
value-key = '1S7_GCCJCO'.
value-text = '1S7_GCCJCO'.
APPEND value TO list.
value-key = '1S7_GCCJIR'.
value-text = '1S7_GCCJIR'.
APPEND value TO list.
value-key = '1S7_GCCJEN'.
value-text = '1S7_GCCJEN'.
APPEND value TO list.
value-key = '1S7_GCCJPI'.
value-text = '1S7_GCCJPI'.
APPEND value TO list.
value-key = '1S7_GCCJSU'.
value-text = '1S7_GCCJSU'.
APPEND value TO list.
value-key = '1S7_GCCJFL'.
value-text = '1S7_GCCJFL'.
APPEND value TO list.
value-key = '1S7_GCCJOT'.
value-text = '1S7_GCCJOT'.
APPEND value TO list.
value-key = '1S7_GCCASV'.
value-text = '1S7_GCCASV'.
APPEND value TO list.
value-key = '1S7_GCCASE'.
value-text = '1S7_GCCASE'.
APPEND value TO list.
value-key = '1S7_GCCOOC'.
value-text = '1S7_GCCOOC'.
APPEND value TO list.
value-key = '1S7_GCCOHD'.
value-text = '1S7_GCCOHD'.
APPEND value TO list.
value-key = '1S7_GCCRD'.
value-text = '1S7_GCCRD'.
APPEND value TO list.
value-key = '1S7_GCCGEN'.
value-text = '1S7_GCCGEN'.
APPEND value TO list.
value-key = '1S7_GCDRI'.
value-text = '1S7_GCDRI'.
APPEND value TO list.
value-key = '1S7_GCDJOB'.
value-text = '1S7_GCDJOB'.
APPEND value TO list.
value-key = '1S7_GCDASV'.
value-text = '1S7_GCDASV'.
APPEND value TO list.
value-key = '1S7_GCDASE'.
value-text = '1S7_GCDASE'.
APPEND value TO list.
value-key = '1S7_GCDOOC'.
value-text = '1S7_GCDOOC'.
APPEND value TO list.
value-key = '1S7_GCDOHD'.
value-text = '1S7_GCDOHD'.
APPEND value TO list.
value-key = '1S7_GCVER'.
value-text = '1S7_GCVER'.
APPEND value TO list.
value-key = '1S7_GCVJOB'.
value-text = '1S7_GCVJOB'.
APPEND value TO list.
value-key = '1S7_GCVASV'.
value-text = '1S7_GCVASV'.
APPEND value TO list.
value-key = '1S7_GCVASE'. -
Regarding uploading the file from Application Server
I am trying to upload a .csv file to Application Server through CG3Z tcode.
But i am getting dump ad below..
What happened?
While a text was being converted from code page '4102' to '1100', one
the following occurred:
- an character was discovered that could not be represented in one of
the two code pages;
- the system established that this conversion is not supported.
The running ABAP program, 'SAPLC13Z' had to be terminated, since the
conversion could cause incorrect data to be generated.
1 characters could not be represented (and thus could not converted).
If 1 = 0, a second or a different error has occurred.
Please let me know..how can i resolve this??
Thanks
PriyankaCheck if your CSV file is UNICODE encoding.
If CG3Z steel not works you can check on OSS SUPPORT if a note solve your problem. -
How to upload data from application server
Hi,
please help me out in uploading the data from application server which is a tab delemited file into an internal table.
Thanks
kumarhi,
Use this sample code as an example.
table declaration
tables: mara.
*data declaration
data: begin of it_lfa1 occurs 0,
vendor like lfa1-lifnr,
land1 like lfa1-land1,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
end of it_lfa1.
selection screen
selection-screen: begin of block b1 with frame.
parameters: p_file type rlgrap-filename obligatory.
selection-screen: end of block b1.
at selection screen
at selection-screen on value-request for p_file.
*& start-of-selection
start-of-selection.
perform transfer_file using p_file.
perform write.
*& Form transfer_file
text
-->P_P_FILE text
form transfer_file using p_p_file.
data: l_message(30) type c.
***opening dataset for reading
open dataset p_p_file for input in text mode encoding default message
l_message.
if sy-subrc ne 0.
message i001(zerr2) with p_p_file.
endif.
*******transferring data from file to app server.
do.
read dataset p_p_file into it_lfa1.
if sy-subrc = 0.
append it_lfa1.
clear it_lfa1.
else.
exit.
endif.
enddo.
*******closing dataset
close dataset p_p_file.
endform. " transfer_file
*& Form write
text
--> p1 text
<-- p2 text
form write .
loop at it_lfa1.
write:/ it_lfa1-vendor,
it_lfa1-land1,
it_lfa1-name1,
it_lfa1-ort01.
endloop.
endform. " write
Thanks
Aneesh. -
Error while uploading the file from Allpcation server in LSMW-7th step
Hi Experts,
what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
Thanks in advance,
KSRHi
I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
Is there any specific CODE PAGE to be maintained...
Thanks in advance
Oarsk -
Uploading xml file from application server
HI everybody guys having promblem reading xml file from application server.Here is the solution. the sample program is below.
TYPE-POOLS: ixml. "iXML Library Types
*TABLES : rbkp.
TYPE DECLERATIION
TYPES: BEGIN OF type_tabpo,
ebeln TYPE ekko-ebeln, "PO document number
ebelp TYPE ekpo-ebelp, "PO line item
END OF type_tabpo.
TYPES: BEGIN OF type_ekbe,
belnr TYPE rbkp-belnr, "Invoice document
gjahr TYPE rbkp-gjahr, "fiscal year
END OF type_ekbe.
TYPES: BEGIN OF type_invoice,
belnr TYPE rbkp-belnr, "PO document number
gjahr TYPE rbkp-gjahr, "Fiscal Year
rbstat TYPE rbkp-rbstat, "invoice status
END OF type_invoice.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
INTERNAL TABLE DECLERATIION
DATA: gi_tabpo TYPE STANDARD TABLE OF type_tabpo,
gi_ekbe TYPE STANDARD TABLE OF type_ekbe,
gi_invoice TYPE STANDARD TABLE OF type_invoice,
gi_bapiret2 TYPE STANDARD TABLE OF bapiret2.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory.
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO swif_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
*DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string.
WORK AREA DECLARATION
DATA: gw_tabpo TYPE type_tabpo,
gw_ekbe TYPE type_ekbe,
gw_invoice TYPE type_invoice,
gw_bapiret2 TYPE bapiret2.
BEGIN OF SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/tmp/'.
Validation of XML file: Only DTD included in XML document is supported
SELECTION-SCREEN END OF BLOCK blk1.
INTIALISATION.
INITIALIZATION.
SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN.
To validate p_file is not initial
PERFORM sub_validate_file.
PERFORM sub_validate_path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Request for filename for xml file from the application server
PERFORM sub_get_filename_appl USING p_file.
START OF SELECTION SCREEN
START-OF-SELECTION.
PERFORM sub_fetch_po_details.
PERFORM sub_get_invoice.
PERFORM sub_rel_invoice.
END OF SELECTION SCREEN
END-OF-SELECTION.
*& Form sub_validate_file
To Validate the file
FORM sub_validate_file .
IF p_file IS INITIAL.
MESSAGE e000. "specify the file path
ENDIF.
ENDFORM. " sub_validate_file
*& Form sub_get_filename_appl
form sub_get_filename_appl USING l_fname TYPE any.
DATA: l_fname TYPE filename-fileintern. " File name
*GET THE FILENAME FROM THE APPLICATION SERVER
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
directory = l_fname
filemask = '*'
IMPORTING
serverfile = l_fname
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_get_filename_appl
*& Form sub_fetch_po_details
To fetch the PO details from the application server
Format of file is XML
FORM sub_fetch_po_details .
TYPE DECLERATIION
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table.
LOOP AT gi_tabpo INTO gw_tabpo.
WRITE:/ gw_tabpo.
ENDLOOP.
ENDFORM. " sub_fetch_po_details
*& Form get_xml_table
Read from the xml file
FORM get_xml_table .
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = p_file.
code to upload data from application server
OPEN DATASET l_filename FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
WRITE:/ 'invalid file path'.
ENDIF.
DO.
READ DATASET l_filename INTO l_xml_line.
IF sy-subrc EQ 0.
APPEND l_xml_line TO l_xml_table.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET l_filename.
code to find the table size
DESCRIBE TABLE l_xml_table.
l_xml_table_size = ( sy-tleng ) * ( sy-tfill ).
*code to convert hexadecimal to XML
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
replacement
= space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
ENDLOOP.
CALL TRANSFORMATION ('ID') " code to put in internal table
SOURCE XML l_str1
RESULT tab = gi_tabpo[].
ENDFORM. " get_xml_tableHi Raja,
I tried the same. But it not populating the table and giving an error message in the return table "line 1 col 1-unexpected symbol; expected '<', '</', entity reference, charac".
I can't find any ' ; ' in the XML file. What could be the possible reason of error? -
Dump while downloading data from Application Server File in 4.6 system
Hi,
When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c.
When we faced similar kind of issue in ECC version, we have used the statement, Ignoring Conversion Errors.
Please let me know how to handle this situation in 4.6 System.
Thanks for your inputs.
Regards,
PhaniHi All,
I am sorry. My question was wrong. It should be while uploading data from internal table to application server, if there are any special characters, it is going to dump.
I will let you know the dump details and code at the earliesst.
Sorry and Thanks again for your prompt response.
Regards,
Phani. -
Importing data from SQL Server 2005 database
Dear Friends
Scenario:
We have built an application for which the database is SQL Server 2005.
Now, we have planned to switch over to Oracle 8i database.
There is a field with data type as Varchar(Max) – which can hold data with a maximum length of 231 characters (SQL Server 2005)
In Oracle 8i, the Varchar2 max size 4000 bytes or characters.
We want to import the data from SQL Sever 2005 database into Oracle 8i database.In the process, the value for the particular field whose data type set as Varchar(Max) in SQL Server 2005 and contains more than 4000 characters gets automatically truncated while importing into oracle.
We want the entire characters stored in the field to be imported into oracle database.
Please suggest solutions.
Thanks and regards
Bharath Kumar VUse CLOB if the data is purely text data. BLOB otherwise.
But the question is why you want to switch over to an Oracle version which is de-supported by Oracle? -
Regarding Reading the file from Application Server
Hi,
I am trying to read data from Application Server but due to special characters it is getting dumped out.
US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
In the last line it is going into dump due to special character ".
Please suggest.
Thanks
Priyanka.Hi,
You can check the mode in which you are reading the file
from application server that is
Open Dataset in Binary or Text Mode.
Hope it helps
Regards
Mansi -
How to get data from application server
hi experts,
when i load data from application server(.csv file) to ODS, data all goes one column.
in infopackage exterdata tabstrip i have given the below values.
escape sign is "
data separator is ,
separator for thousands is ,
my sample data:
"1010000";"A410";"03.2008";"113.5704531"
"1010000";"A410";"04.2008";"93.1146410"
any ideas..
SiriHi Siri,
You should look in the T.Code :RSCUSTV1
BW:Settings for Flat File
Thousand separator
Dec. point separator
Field separator
Field delimiter
Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
This will resolve your issue
Regards
Hari -
Download 350MB of data from Application Server to Presentation server
i want to Download 350MB(Around 2.5Million record of Table BSEG) of data from Application Server to Presentation server..
i have tried with the transaction CG3Y and program using open dataset,read dataset,close dataset,ws_download...but went in vain,,,ended with TIMEOUT ERROR..will OPEN DATASET 'path' FOR OUTPUT FILTER 'Compress' be helpful
..please help me ..its urgent..you can do the FTP with Unix commands..
initially connect to the application server by using command
FTP <app server ip>,then it willl ask for username and password... after successful connection you can use the following commnads to transfer file
lcd <destination path name>(set the dest path)
cd <source path>(set the sorce path),
get <filename to be transfererd>( do the transfer)....
You can do same with ABAP code also, for this you need to use some function modules like..
FTP_CONNECT ( to establish the connection)
FTP_COMMAND ( to execute the commands like cd, lcd get,put)
finally FTP_DISCONNECT to close the open connection...
for further details refer standard program RSFTP002,RSFTP003....
reward points if helpful... -
TRANSFER OF DATA FROM APPLICATION SERVER TO REPORT
I have a file on application serverin T-code AL11(sap directories).I want to bring the data from this file to my report.
Please explain me procedure with example.
I approached below method:
I approached with OPEN DATASET,But i got short dump.
syntax:
open dataset c_dset(file in app.svr.) for output in text mode
encoding default.
transfer c_dset to i_transfer(itab).
close dataset.
short dump:
unable to open file "".
Kindly solve my problem.Hi Saritha,
If I am not wrong u r trying to read the data from the file which is on the apps server rite?
Use open data set with input for reading the file from application server .......... output is to write the file onto the application server
check the below sample code.......
DATA:
len TYPE i,
text(30) type c,
dir(30) TYPE c VALUE '/tmp/test.txt'.
DATA: begin of data OCCURS 0,
matnr type matnr,
werks type werks_d,
end of data.
START-OF-SELECTION.
CLEAR: text.
OPEN DATASET dir FOR INPUT IN TEXT MODE.
DO.
READ DATASET dir INTO text.
IF SY-SUBRC 0.
EXIT.
ENDIF.
close dataset. -
How to upload the data from two sheets in one excel into SAP
Hi experts,
My requirement is to upload the data from two sheets in an excel into an internal table.How can this be achieved.Is some OLE application has to be used?
Thanks
AbhishekHi
see this program will upload excel file to application.
*& Report ZSD_EXCEL2
REPORT ZSD_EXCEL2.
types: begin of ttab ,
fld1(30) type c,
fld2(30) type c,
fld3(30) type c,
fld4(30) type c,
fld5(30) type c,
end of ttab.
data: itab type table of ttab with header line.
selection-screen skip 1.
parameters: p_file type localfile default
'C:\test.xls'.
selection-screen skip 1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
exporting
static = 'X'
changing
file_name = p_file.
start-of-selection.
clear itab. refresh itab.
perform upload_data.
loop at itab.
write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
endloop.
* Upload_Data
form upload_data.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
file = p_file.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '200'
i_end_row = '5000'
tables
intern = xcel
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
loop at xcel.
case xcel-col.
when '0001'.
itab-fld1 = xcel-value.
when '0002'.
itab-fld2 = xcel-value.
when '0003'.
itab-fld3 = xcel-value.
when '0004'.
itab-fld4 = xcel-value.
when '0005'.
itab-fld5 = xcel-value.
endcase.
at end of row.
append itab.
clear itab.
endat.
endloop.
endform.
Maybe you are looking for
-
Is anyone else having keyboard issues? On the iPad Air and Mini the keyboard is in the way when trying to reply to a post or creating one. I try to scroll the screen up but that doesn't work either. I have also noticed a keyboard lag. This since iOS
-
CATT upload done in dev server, want to transport to QA / PRD
Hi Experts, CATT upload is created in development server. I want to upload data in quality for testing and finally upload in production server. Should I transport CATT or it can be run by using RFC. Please advise. Regards, Irfan
-
Hi folks i'm using db version Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production PL/SQL Release 9.2.0.8.0 - Productioni have a two tables t1 and t2, i want to fetch t2 records in sequence order(if any of record matches with t1, that sho
-
Query option in report parameter
I've created a report with a bind variable. When I run the parameter form, I see "Query options" and the filed for my bind variable. Obviously I'm missing something, but where can I change the font (color and typeface) of the text "Query options" Ton
-
Add primary key column to fact tables?
Our datawarehouse folks asked me if they could add a primary key column in the BPC fact tables. Anyone know if this is possible?? Edited by: Shawn Freundschuh on Apr 3, 2009 12:27 PM