Uploading tool

Hi,
Could you please advise clients questions as below?
1. Client want some utilities to help them to upload Intial balances GL, Vendor, Customer, Asset. Any excel format upload.
2. They want to copy GL accounts in production system from one co code to the new one (OBY2 doesn't allow us to copy once some entries exist in company code)
I am not sure if there is any SAP standard transaction to do that krub.
Please kindly suggest and the point will be rewarded.
Thanks and Best Regards,
Bird

Hi
1)LSMW is the best and tested tool uplaoding opening balances of GL, AR, AP and Assets
2) Are you asking for coping the chart of accoutns to be copied or balances
Regards
Ganesan

Similar Messages

Interakt File Upload incompatible with Firefox? Recommend ASP Upload tool?

Hi,
I've been using Interakt's File Upload tool for quite some
time but have
recently been made aware that it doesn't work in Firefox!
Anyway, I notice that Interakt no longer exist now, having
been bought out
by Adobe some time ago as it turns out.
Has anyone experienced this problem and found a solution?
Adobe aren't
offering any support for the Interakt products and no-one is
answering, or
even looking at, their forums.
My feeling is that I'll need to just scrap the Interakt
extension and try
something else? Can anyone recommend a good File Upload
extension for
Dreamweaver ASP/VBScript?
Please do not recommend DMX Zone as I am looking for a
company that actually
provides customer support for their products!
Thanks for any advice offered. Much appreciated
Nath.

Hi Joris,
Is the Adobe Dreamweaver Developer Toolkit included with
Dreamweaver CS3?
I'm using Dreamweaver 8.0.2 at the moment, but I would
upgrade to CS3 if it
included the Developer Toolkit. If not, it would appear that
Adobe want
$299 for it, although I'm in the UK, so it'll probably be
double that! :o(
I was previously using Interakt's File Upload
behaviour/extension, but the
re-direct code isn't Firefox compatible, so it doesn't
re-direct correctly:


<%
'Make a transaction dispatcher instance
Dim tNGs: Set tNGs = new tNG_dispatcher
tNGs.Init ""
%>
<%
'start Trigger_FileUpload trigger
'remove this line if you want to edit the code by hand
Function Trigger_FileUpload (ByRef tNG)
Dim uploadObj: Set uploadObj = new tNG_FileUpload
uploadObj.Init tNG
uploadObj.setFormFieldName "imageone"
uploadObj.setDbFieldName "imageone"
uploadObj.setFolder "itemphotos/"
uploadObj.setMaxSize 1000
uploadObj.setAllowedExtensions "jpg, gif, jpeg"
uploadObj.setRename "auto"
Set Trigger_FileUpload = uploadObj.Execute()
End Function
'end Trigger_FileUpload trigger
%>
<%
'start Trigger_Custom trigger
Function Trigger_Custom (ByRef tNG)
query = "SELECT rowID FROM table WHERE rowID = " &
Session("rowIDsess")
On Error Resume Next
Set rsCheck = tNG.connection.Execute(query)
if (Err.Number <> 0) OR (Not rsCheck.EOF) then
KT_redir("confirmation.asp")
else
Set Trigger_Custom = nothing
end if
On Error GoTo 0
End Function
'end Trigger_Custom trigger
%>
As you can see, it should redirect to confirmation.asp, but
this doesn't
work in Firefox - it just loads a blank white page! Do you
have a re-direct
selected in your form using Kollection 3.7.1? Does it work?
Is my code
vastly different to what you've got?
I purchased Advanced HTML Editor from DMX Zone, experienced a
problem with
it, sent e-mails and posted on their forum. I did not receive
ONE reply. I
won't be back.
Would appreciate any help you could offer.
Thank you.
Nathon.
> Some of the interakt products are now sold as Adobe
Dreamweaver Developer
> Toolkit,
> using Kollection 3.7.1 I can't reproduce not being able
to upload in
> Firefox on Mac and Windows.
>
> I have good experiences with DMXZone support, why are
you suggesting
> they're not providing support?

Upload Tool for KKPAN

Hi,
Is there any uploading tool for creating cost estimate without quantity structure.
I tried with LSMW, when i save the list i have to save the data twice. The second time when i give the save command in LSMW or BDC system is not recording the command. Is there any other possible way out to upload
Regards
Vasantha

Check if you can open the PDF link below. Also, you can display a note from SAP Marketplace just register using your current SAP system's installation ID.
MDUG User Guide

Google+ photo upload tool does not show thumbnails

When I use the photo upload tool in Google+, you select the pics to upload, enter an album name or use an existing one, and the upload should start. When this is complete, each uploaded photo should show in a panel so that you can then rotate, delete. This works in IE. In Firefox 24, each photo is just shown as a blue line.
I have tried Firefox in Safe Mode to no effect.

Hello in your system details it seems that you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js] file. The user.js file does not exist by default. If you create the file, forget it, if you have not create the file then try to delete the User.js file, to see if the problem goes away (some programs create the file also).
thank you

Flash Media Server - Easy Upload Tool?

Hi,
My company currently uses FMS 3.5 and use it quite reguraly to stream video to clients over the web. I am currently the only user with access to the root FTP for placing the video files onto the FMS. What we would like to know; Is there any easy way to for other colleagues to upload videos onto the FMS without giving them direct access. IE an upload tool that places a video onto the server.
I have found a tutorial here:
http://www.adobe.com/devnet/adobe-media-server/articles/video_sharing_web_app.html
which seemed to solve an issue, however it seems to require Flash Media Encoding Server, which no longer exists and we do not have.
Any help or suggestions would be greatly appreciated.
Regards,
Martin

This forum is just for discussions on the forums themselves. I suggest that you post your question here:
http://forums.adobe.com/community/adobe_media_server

Quick Upload Tool (Costco) Photos

The Costco Quick Upload tool (Java-based) doesn't work with Safari. I have the last update (7) for Java 6.0 installed.
Any help will be appreciated. Thanks.

but....it works with IE 7.0 and Firefox, the problem is with Safari.
Maybe so, but you're forgetting that all browsers are different, and that web developers can design things to only be compatible with certain browsers, as Costco has obviously done here. From their Help pages for Photos"
"The Java-based Quick Upload tool works best with Internet Explorer and Mozilla Firefox browsers. If the Quick Upload tool isn't working properly and you are using a browser other than Internet Explorer or Mozilla Firefox, you might want to download the latest Internet Explorer or Mozilla Firefox web browser and try the Quick Upload tool again.
If using IE or Firefox has not resolved the issue, then you might have to check if you have the most current version of Java installed on your computer. You can check which version you have at Java's website.
If the Quick Upload Tool is still not loading properly, then you might need to adjust your Java settings. To check your Java settings, follow the steps below. Please feel free to contact customer support if you have any questions.
Launch Internet Explorer.
Click the 'Tools' dropdown menu.
Click 'Internet Options' once.
Click the 'Advanced' tab of the 'Internet Options' window.
Scroll down until you locate the section of the 'Settings' box that pertains to Java use.
If there isn't a checkmark in the box below the 'Java (Sun)' heading, then click the box once to place a checkmark there.
Unfortunately, that's the nature of the game that companies play when they set out to avoid web standards and platform/browser neutrality.
Mulder

Infor Records - Upload Tool

Hello,
I have successfully used the download tool for Info Records. My question is once I have made the needed changes, what do I need to do to get the data to upload just as successfully?
I made sure that the data was saved as a .csv file, and that it was in the same order as the download.
Please save me from having to change each IR individually.
Thank you in advance for reading this.
Judi

you can use the LSMW is a tool to upload the master data.
The Tcode is LSMW.
Here is the link explaining step by step LSMW
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
LSMW for Material Master
http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm

MOSS 2007 bulk upload tools for upload 80 gb data to library

hi,
i have created document library on MOSS 2007 , now i need to upload 80 gb data to library .
please help.
Thanks,
Saidireddy

Assuming you're migrating from the file system:
- Windows Explorer view for simple scenarios (limited feedback if something goes wrong)
- You can try if MS SyncToy supports 2007 (free tool, advanced features)
- There are free community tools out there on TechNet gallery and CodePlex
- Lastly, to do an Enterprise level migration you will need to use a commercial product such as DocAve or Quest
So it depends on your needs and requirements
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Customer Invoice Upload Tool - Can't get extension fields to populate

In the documentation for the customer invoice upload documentation, it says to get the tag for your extension field in the Customer Invoice XML Output. No issues there. But when I add the extension field to the XML for the Customer Invoice Request Service Interface, the field never populates in the generated invoice request. Note that I cannot create a new XML Upload Service interface as a workaround because this is a 3.5 customer system
The extension fields are in a different namespace from the Request Service Interface, so I've tried the two methods below to populate my Advertiser extension field. I've had no luck with either. Here's some sample XML from the beginning of the file. The files are also attached. Any help is appreciated.
[ I also posted on the SCN where I attached the test files.|http://scn.sap.com/thread/3237936]
Method 1
<?xml version="1.0"?>
<CustomerInvoiceRequestRequest>
<MessageHeader>
<CreationDateTime/>
</MessageHeader>
<CustomerInvoiceRequest actionCode="04" reconciliationPeriodCounterValue="1">
<BaseBusinessTransactionDocumentID>EXT_100001_TALINV</BaseBusinessTransactionDocumentID>
<BaseBusinessTransactionDocumentTypeCode>29</BaseBusinessTransactionDocumentTypeCode>
<ProposedInvoiceDate>2012-09-16</ProposedInvoiceDate>
<Name>hhhc</Name>
<ReferenceBusinessTransactionDocumentID>100001</ReferenceBusinessTransactionDocumentID>
<Advertiser xmlns="http://sap.com/xi/AP/CustomerExtension/BYD/A03DP">
<EXTAdvertiser00163E027E021ED1BFDF09124EFF4876_002>JUDSON</EXTAdvertiser00163E027E021ED1BFDF09124EFF4876_002>
</Advertiser>
<BusinessProcessVariantType>
<BusinessProcessVariantTypeCode>1</BusinessProcessVariantTypeCode>
<MainIndicator>true</MainIndicator>
</BusinessProcessVariantType>
Method 2
<?xml version="1.0"?>
<CustomerInvoiceRequestRequest>
<MessageHeader>
<CreationDateTime/>
</MessageHeader>
<CustomerInvoiceRequest actionCode="04" reconciliationPeriodCounterValue="1">
<BaseBusinessTransactionDocumentID>EXT_100002_TALINV</BaseBusinessTransactionDocumentID>
<BaseBusinessTransactionDocumentTypeCode>29</BaseBusinessTransactionDocumentTypeCode>
<ProposedInvoiceDate>2012-09-16</ProposedInvoiceDate>
<Name>hhhc</Name>
<ReferenceBusinessTransactionDocumentID>100002</ReferenceBusinessTransactionDocumentID>
<n1:EXTAdvertiser00163E027E021ED1BFDF09124EFF4876_002 xmlns:n1="http://sap.com/xi/AP/CustomerExtension/BYD/A03DP">JUDSON</n1:EXTAdvertiser00163E027E021ED1BFDF09124EFF4876_002>
<BusinessProcessVariantType>
<BusinessProcessVariantTypeCode>1</BusinessProcessVariantTypeCode>
<MainIndicator>true</MainIndicator>
</BusinessProcessVariantType>

Hi Judson,
Thanks for sharing this answer, i am also facing the same issue. But here in my case i have extension field in Items nodes and also got the xml node from customer invoice xml, like below but when i process the xml it adds invoice request but dont maps th "test" nodes data to that extended column.
<n1:test_0LIGMSME2T388H1SZMFGTNHGN_Y38WD8BTY xmlns:n1="http://0008768412-one-off.sap.com/Y38WD8BTY_">test data</n1:test_0LIGMSME2T388H1SZMFGTNHGN_Y38WD8BTY>
Could you please suggest what i am missing.

Image upload tools

I was wondering if anyone can steer me in the right direction
please, if dreamweaver cs4 can generate the code neccessary to
create image uploads for admin pages.
I have been using the Data Objects - Insert and Update Record
Insertion Form Wizzard with php and mysql and wondered if there was
a way of adding a button to these forms with relivent code to
insert a set of images from my desktop to my rootfolder without
having to hand code it.
Thanks

Hi Henry,
so do you currently have a column named "order" ? If so, you´ll need to rename it to "order_ord" or something.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

WANTED: Function Module (Product Allocation Planning Hierarchy Upload Tool)

Hi,
I would like to seek assistance in utilizing the right function module in uploading Product Allocation Planning Hierarchy to MC62.
I've tried direct table update and BDC but to no avial.
Points will be rewarded.
Thanks in advance

Hi,
I'm having trouble using the FM 'MCP_GET_HIERARCHY'.
CALL FUNCTION 'MCP_GET_HIERARCHY'
 EXPORTING
 i_gstru =
IMPORTING
RETURN =
 TABLES
 t_filter =
 t_char_values = .
What do I put in i_gstru, t_filter, and t_char_values?
I'm very new with this.
Thanks in advance for the help.

Open Source tool(Jar) for multiple file/folder upload

Hi experts,
I would be obliged if anyone could kindly let me know some open source file/folder upload tools which can be used free of cost and source files of which could be edited and used for customization.
Need to integrate this tool with a php site. I hope multiple folder/file upload tools are best developed and made available only in java.
Please help with useful links to resources and valuable advices.
Any help in this regard is well appreciated.
Warm Regards,
Anees

Need to integrate this tool with a php site.
Please help with useful links to resources andGoogle found this [http://jupload.sourceforge.net/]
valuable advices.Try Google first before posting ;-)
Thanks!

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

Document ID in KM upload iview

Hi,
I would like to use KM to store scanned documents. I have created new resorurce type and some structured properties that describe it in detail. But I have trouble with document ID (displayname). When I use standard KM iview for uploading documents and browse to file on my desktop upload iview automaticaly fills the name of the document and user must modify it manually according to real identification. Is there some possibility to "construct" name of the document for example from properties or simply break dependecy between property "File" and "Name"? Second question is whether it is possible to preset type of the document (resource type) in upload iview?
Thanks a lot
Zdenek.

Hi Trevor,
> I would suggest that you set the property itself to
> default to the resource type that you want.
But where? In iView properties, via personalization ?
> Then in the upload tool, the default will be selected, but
> able to be modified if need be.
Thanks,
Zdenek

How to Change Default Iview Properties for Role Upload?

Hello,
We have many roles to upload from R/3 ABAp system to NW2004s EP.
We use the Role Upload tool in the Portal to achieve this.
It works fine, the roles are created in the portal and can be assigned to users.
The fall back is that we have to modify every single transaction iview in the portal after the upload to modify the SAP GuiType from "SAP GUI for HTML" to "SAP GUI For Windows".
How can we change the default model used of SAP GuiType for uploading transaction iviews in uploaded roles?
Also, the uploaded role is not flaged as an "Entry Point", is there a way to set this marker to "Yes" as a default value for all uploaded roles?
Best regards.

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

Uploading tool

Similar Messages

Maybe you are looking for