Uploading website prob with dw cs3 windows 7

I reinstalled dreamweaver cs3 on dell laptop with windows 7 64 bit pro. program works but fails to upload files to website. ftp settings checkout when test is selected. after modifying a file, the file name is highlighted, the blue upload arrow is clicked, and it acts like it uploads but nothing happens. if i try to upload the whole website, it goes through all the files in 10 seconds and stops but nothing is uploaded. not a professional at this but did not have this problem prior to reinstalling on new computer. adobe folks won't help.

i am able to use firezilla. i wasn't familiar with the program but downloaded and installed it. used the same settings. it's curious that dreamweaver cs3 will no longer upload.
filezilla will work but it is a bit inconvenient to have to start another program to do the work
also, can't get the the files to load into the local_host web browser using f12

Similar Messages

"500 server not found" error on Windows 8.1 when accesssing my website (works with Mozilla on Windows 7 and with IE on 8.1)

New Surface Pro 3 running windows 8.1 (works with Windows 7). Firefox 34.0.5 is browser. Cannot access my website only. Have cleared cache. Works with Internet Explorer.

Thank you. Since the website can be accessed by other browsers (Internet Explorer), I believe the problem likely is in Mozilla's configuration settings--I just don't know how to fix them!

Photoshop cs3 + windows vista + intuos 3

I am working with "photoshop cs3" "windows ultimate vista" and an "wacom intuos 3" tablet and I experience heavy lags while drawing like the brush-strokes don't quite follow my moves, and I have to wait for them to catch up.
When I open a large file and I try to apply the first brush stroke on my drawing the cursor screen disappears for a while and photoshop is not responding.
Then Photoshop comes back so the cursor and I can start to work. But as soon as I drag the page using the little Hand tool photoshop stops responding again for few more seconds and when it restarts I can hardly control the direction of my new brush strokes.
Apparently in order to restart the only remedy I found (by chance) is by toggling the layer visibility status (change a layer from visible to not and back to visible again). After this exercise I can draw in photoshop again! But of course same problems again as soon as I will use the hand tool and move on the screen again!!!
Any idea about what could be behind my problems!?
What should I check?
(These problems started after last week immediately after re installation of vista on my machine, I never had this problem with vista photoshop and intuos on that same machine before!)
Thanks
Mario

I have CS3, Vista Ultimate and an Intuos3 tablet. No lags or delays now. But I used to have them and many were reported on the Wacom Users Forum when Vista first came out. I can't remember now what the fix was - have a look on the Wacom Users' Forum. If you had it running ok on your previous Vista installation some software setting must have changed in the new installation. Things that may help are:
get latest Nvidia vga card drivers (if you have an Nvidia card); get the latest Wacom driver; Logitech Setpoint software conflicting - the latest is ok for me; disable/switch off the Vista Pen and Input device.
Sorry, I can't remember the fixes but they should be available if you dig around in the Wacom Users' Forum.
David

Links open with a new window help

I'm trying make my links on my website open with a new window. This way the customer won't have to find his way back to the site. I found this thread-http://discussions.apple.com/thread.jspa?threadID=339861
It looks to be pretty helpful but I can't figure out how to edit the html file after I published it. Any suggestions?

Welcome ny854
You might want to try using an html editor like Taco HTML Edit to open html files, I find it makes them much easier to read.
Your file is viewing as a web page because Safari is probably set as the default app to open html files.
What you need to do is press the "ctrl" key when you click on the file in your iDisk, this will give you a menu, choose Open With, then choose the app that you want to open the file with from the list that you see. If you use text edit (launch the app, go to Text Edit > Preferences > Click Open and Save > Check “Ignore rich text commands in html files”).
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

Uploading files to website not working with Safari in Windows 7

Safari version: 5.1.7
OS: Windows 7
Hi,
I am a website owner, and I have a feature on my site where users can upload large (up to 50MB) music files to my server. The feature works in Firefox on OSX & Windows platforms and it also works in Safari on OSX. The uploading feature is not working with Safari for Windows. Do you have any idea why and how to fix this? It can't be an issue with my server as it works in other browsers fine and works fine in Safari for OS X.
If you have any information on how to solve this or things for me to try to rectify this for use with Windows operating system it would be much appreciated.
Thanks.

GREAT NEWS!!!!
I have solved this issue myself with some help from my a user on Microsoft Forums. The issue stems from the mime type of each Browser Chrome, IE, & Safari for Windows defaults as audio/wav. When the mime type is changed to audio/x-wav everything works. Firefox defaults to audio/x-wav and when changed to audio/wav it DOES NOT work.
Once I input some code in my .php upload page to change the mimetype if audio/wav is detected everything works GREAT!!!
So Here is what you need to do: Find your upload page and input this code:
echo "<p>MIME Type: ".$_FILES["file"]["type"]."</p>";
right before your "If/then" statement of file type. For me it was near line 30 in my upload.php page, but I'm sure this is different for everyone.
This will detect and DISPLAY the default mime type of your browser on the error page when your upload doesn't work. Once you know what mime type works for your file type then you can change your "if/then" statement for mime type upload to change your mime type to the correct one.
I don't want to give the code here, because I'm sure it's specific to your file types and your site construction, but this should lead you on the right track.
***This is the solution if you ARE NOT ABLE to upload any certain file in a certain Browser. It has to do with mime type construction***
I hope this helps others like it helped me!!!!!

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

Problems with Fireworks CS3 in Windows 7 Pro 64 bit

I have recently upgraded to Windows 7 Pro from Windows XP Pro. My Fireworks CS3 is having a problem. I cannot select items in the left side menu bar if I minimize or move the Fireworks CS3 window. If I have just opened the window it works, but minimize the window or move it and the toolbar stops working.
This problem is not unique to my machine. 2 other people are having the exact same problem. Here is the link to the Windows 7 forum:
http://www.sevenforums.com/software/26957-adobe-fireworks-cs3-issue.html
We sure could use some help. This is one of my bread and butter programs.

I'm happy to hear you have other work-around alternatives!
Businesses with mission-critical software usually are very careful to research that their software will run on any proposed new system or that alternative software is available. This is the main reason that Microsoft had to continue supporting XP longer than they intended. Too much business-critical software ran on XP but did not run under Vista and would take some time before it would be upgraded to do so...if at all.
If you have "bread and butter" apps, then it was your responsibility to make sure that you could run them once you upgraded. Adobe's software worked more or less as advertised for the operating systems that were available at the time the versions were released. That's reasonable. Expecting indefinite support into the future is not.
Fireworks isn't a $2000 product. Adobe continues product development, yes. They've moved on to CS4 and its patches. You can upgrade to FW CS4 for about $150. The system requirements for FW CS4 do not include Windows 7; note that Fireworks is only certified for 32-bit operating systems:
http://store.adobe.com/store/en_us/popup/software/fireworks4/systemreqs.html
However, there's a statement about CS4 applications (in general) working with Windows 7:
http://www.adobe.com/products/fireworks/faq/?anonymous_element_1=4
And you'd want to get the recent updater:
http://www.adobe.com/support/fireworks/downloads_updaters.html
speedtigger wrote:
... It is probably not a huge problem to fix for an Adobe engineer.
If the feature worked under Vista but does not work under Windows 7, then that means that the problem probably lies somewhere in how the program communicates with the OS. The problem is not isolated to the tens - possibly hundreds - of thousands of lines of Fireworks code, but in how that code interacts with the Windows 7 APIs. To solve this problem is not the work of "an Adobe engineer." It's the work of a project team. It's the work of a project team which would have to be pulled off development of Fireworks CS5 for a few months to resurrect the old CS3 code, get familiar with it, and try to track down and solve the problem, then package up, test, and release a patch . By pulling resources off CS5 development, CS5 would be delayed or quality inversely impacted. Since CS3 is not a current product for sale, I can't see Adobe making this investment. There's no return on it, where there would be a return on getting a quality FW CS5 out the door on time.

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Problems with saving in Illustrator CS3 - Windows

I'm using Illustrator CS3, Windows XP. Even the smallest files take a very long time to save. I try to save and it initally appears as if nothing is happening. If I click again, a portion of my screen goes white and the hour glass sits for what feels like forever while "Not responding" appears next to Illustrator in the bar. Eventually it finishes. Have run into the same problem with PhotoShop a couple times as well. Seems to have started after my upgrade to CS3. Can anyone help?

"it initally appears as if nothing is happening" - no-no, disk indicator should be bright and nearly no-blinking!
Solutions are (depending on the problem severity):
1. Make more layers (even for the same kind of objects, especially for texts)
2. Use RAID 5 disks for scratch files (VelocyRaptor is the best choice)
3. Use i-RAM for scratch files (if the project not too big)
4. Use RIndMA disk (http://hardwareforall.com/ww/serverRAMdisk.html) for scratch files

Uploading photos from my HP TouchSmart , windows 8 to a website

I am having trouble uploading photos from my TouchSmart HP Windows 8 to my Etsy page. In the computer they are right side up. Once they are uploaded to Etsy, they are upside down or sideways. I even went back to the computer, rotated them accordingly....uploaded again...no good. Same problem. I emailed some of the same photos to my friends....and going back to the sent folder afterwards....the attachements were all upright...but when my friends received them, they were upside down. I cannot sell my items on Etsy without pictures and I am becoming very frustrated with this. Please help me solve this problem.

What size are the photos (e.g. 500KB, 1MB, etc.)?
Have these photos been used successfully before from a different system?
According to the following thread, the users photos stopped uploading upside down once the file size was reduced to below 250KB.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Is there any diffence in rendering websites with safari for windows and safari for mac os, or are both equal?

Is there any diffence in rendering websites with safari for windows and safari for mac os, or are both equal?
So is it necessary to buy a mac to guarantee that a website acts like it should, or is the Safari for Windows enough?

So is it necessary to buy a mac to guarantee that a website acts like it should, or is the Safari for Windows enough?
Pages render the same for Mac and Windows in Safari.

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

I would like to have a video splash page on my website along with a video uploader.

I would like to have a video splash page on my website along with a video uploader. Can this be done in BC? I don't even see video uploader templates for sale? Help anyone.

I am not sure what you mean by "Muse Side" Or BC.
People who have only Muse experience with the web, sorry its hard to follow what you mean sometimes so bare with people like me.
BC - This is the CMS (Content management system) and hosting platform to develop websites on. Muse is a very basic graphical based interface to build websites. This is NOT the only thing you use to build websites on and use with BC. I use Coda2 for example (We design and then code sites ourselves to offer rich, feature and web standard, well optimised etc websites).
Because embeded videos are html, flash etc depending on what you choose then you can.
Auto play is a bad idea, its a bad user experience. Why? Say you just had a gaming session or listed to music, you now have that stopped and your now browsing the web. All of a sudden you load a site that starts playing sound in your ears - This is a big shock and its a very well known pet hate of web users. It puts them off your site instantly.
In saying that you can have a video autoplay from youtube if you just enable the option when you embed it, so does vimeo. That is at the basic levelt.
If you want to have a modal pop up on your home page you will need to code it to do so when you load the home page using javascript. In that you can have the video and set that to autoplay. The one thing you will need to do is also code cookie support in javascript as well. You will want to do this when the user closes the browser because as soon as they do so they do not want to see it again if they reload or go back to the home page. Your cookie will be checked every time the homepage loads and if it is there - dont play the video, if it is not then play the video popup.

Slideshow Issues with Fireworks CS3

Hello all,
I apologize in advance for this; I'm trying to fully take
advantage of all the software included in Creative Suite 3 Web
Premium. I've been using Dreamweaver and Photoshop almost
exclusively, and thusly haven't touched Fireworks until this
morning.
I thought it would be nice to have Fireworks produce a
slideshow for my website using the "Create
Slideshow" feature. I have all the images in a folder on
my desktop (my iMac desktop.) The album selector allows me to
choose that folder and uploads the pictures into the images window.
If I choose to create the slideshow and have the files exported
back to the desktop, it shows a nice progress bar and (pretends,
apparently) to write the necessary files.
However, that's all it does. Pretend. The filenames of the
images, when clicked in the images window, do not load previews
into the preview pane. The empty pane says "file not
found." And when I attempt to "preview in web
browser," Safari gives me a "file not
found" error. Sure enough, when I go back to make sure the
.swf and .xml files have been written, I discover they are not.
Fireworks behaves the same regardless of whether I use the
Flash-based or SPRY based players.
Since my problems were addressed verbatim in
this
thread, I made sure there were no spaces or capital letters in
either my folder or filenames (there aren't,) and Fireworks only
has to go as deep as my desktop to import and export the files it
needs/produces.
Please tell me I'm making some sort of newbie error. Since I
use Dreamweaver, I am making the (somewhat large) assumption that
Fireworks can work offline. That is, none of these files are
uploaded to my web server, nor is the finished product uploaded to
my web server. Is that the problem? I'm so very stumped right now.
Thanks,
~G~ (Ha. The forums censor my name.)

Hi,
Not much I can do, as I'm not on a Mac and I couldn't get the
link (even
after I'd stuck the clipped bit back on the end) to work, so
couldn't get to
the 'history'.
Does this ...
www.fasterthanu.com
...work for you? If it does, will a peak at the code help
with your problem?
If not, if you'd like to zip up a few of the images you want
to create your
gallery with and specify the gallery you want, I'll have a go
at knocking
together a gallery for you. Then, perhaps we can establish
what's going
wrong from your end. Send any zipped files to peter (at)
fasterthanu. com
Peter
"Gayle Duncan" <[email protected]> wrote in
message
news:[email protected]...
| Hello all, I apologize in advance for this; I'm trying to
fully take
advantage
| of all the software included in Creative Suite 3 Web
Premium. I've been
using
| Dreamweaver and Photoshop almost exclusively, and thusly
haven't touched
| Fireworks until this morning. I thought it would be nice to
have
Fireworks
| produce a slideshow for my website using the 'Create
Slideshow' feature. I
have
| all the images in a folder on my desktop (my iMac desktop.)
The album
selector
| allows me to choose that folder and uploads the pictures
into the images
| window. If I choose to create the slideshow and have the
files exported
back to
| the desktop, it shows a nice progress bar and (pretends,
apparently) to
write
| the necessary files. However, that's all it does. Pretend.
The filenames
of
| the images, when clicked in the images window, do not load
previews into
the
| preview pane. The empty pane says 'file not found.' And
when I attempt to
| 'preview in web browser,' Safari gives me a 'file not
found' error. Sure
| enough, when I go back to make sure the .swf and .xml files
have been
written,
| I discover they are not. Fireworks behaves the same
regardless of whether
I use
| the Flash-based or SPRY based players. Since my problems
were addressed
| verbatim in
|
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=14&cati
| d=193&threadid=1269661 I made sure there were no
spaces or capital
letters
| in either my folder or filenames (there aren't,) and
Fireworks only has to
go
| as deep as my desktop to import and export the files it
needs/produces.
Please
| tell me I'm making some sort of newbie error. Since I use
Dreamweaver, I
am
| making the (somewhat large) assumption that Fireworks can
work offline.
That
| is, none of these files are uploaded to my web server, nor
is the finished
| product uploaded to my web server. Is that the problem? I'm
so very
stumped
| right now. Thanks, ~G~ (Ha. The forums censor my name.)
|

Uploading website prob with dw cs3 windows 7

Similar Messages

Maybe you are looking for