Upon start I get a blue screen with B817977E

HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac.  This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work.  Holding the on button in does not work.  If it does come on My computer connects wirelessly, but does not print.  Then it will not shut down.

lonnlar,
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • HELP! iMac not starting up ... blue screen with folder and blinking ?

    my imac is not starting up. when i turn on the computer, i get a blue screen with a blinking folder icon of the finder and a black question mark. i can't move anything or type anything.
    i have tried powering down and powering back up with holding down the option key, but all i get is a screen with two buttons with a curved arrow and a straight arrow. however, i can't click any of them!
    i don't know what to do and i need major help! can anyone help me? i don't want to spend the $49 again for a simple fix.

    For starters, follow the steps in this Apple KB Article Post back if you have any questions or things still don't work out.
    Clint

  • Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

    I'm having same problem in develop module which is laggy as hell compared to LR5.8
    Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

  • Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

    Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

    Hi Chandan,
    Kindly try the below mentioned link.
    Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
    Please share the results once you have tried the steps.
    Thanks,
    Atul Saini

  • TS1411 my desktop Mac OS X is not starting, I get the gray screen with the apple logo and a bar below and then shot off by itself.

    My Imac is not starting , I get a gray screen with the logo and a bar below and about one minute the bar desapier and shot off by itself. I try evething that I can think of and not luck. I did disconect all accesories and still the same, I use the start up disc and same.. now I can not get the disc out.
    Please advise what I need to do to solve the problem. Recently this computer was upgraded from 10.4 to Mountain lion and add more memory.

    Thanks for your help.
    Same thing happen when I hold the button, it idle for a while and then turn off by itself. Any more suggestions?
    I got the disc..

  • Got a iMac upon start up it has white screen with apple logo and loading wheel spinning forever under it, does anybody know how to fix this?

    PLEASE HELP!!!!!! EMERGENCY Upon start up normal start up noise occurs, then after white screen with Grey Apple logo, and a spinning loading wheel under it (thee repetitive lines NOT rainbow one) ?!? then thats as far as it goes it stays on that screen forever will not boot up.  Any info on how to possibly fix? I've tried several of the Start up shortcuts , it wont even start up in Safe Mode . My fiance' is crushed she is a writer and EVERYTHING SHE HAS WORKED ON is somewhere on that hard drive. Any thoughts, i'm open to any and all LOGICAL responses, thank you very much for ya'lls time ........Its just heartbreaking to see my iMac in this vegistated coma,The whole reason i bought a mac was cause I love them I have Apple EVERYTHING, so once again please help.

    Try this: Switch off your iMac wait 10-15 seconds hold down the Option Key (alt) key then press the power botton but keep the option key down. This should show all the available options to boot from. I trust you have a full backup, Good luck.

  • When I shut my MacBook Pro, I cannot restart it--I get ablank blue screen with a little flicker like it wants to open but it can't. Is there a way around the problem?

    I did a clean reinstall on my Mac Book Pro and in the process I lost my Espon print drivers. I went to th eEspon site and downloaded what was needed. I installed per instructions. I was told to reboot, but all I got was a blank blue screen. I shut down the computer again all got was a blank blue screen. What should I do> How can circumvent the usual satrtup procedure.
    Tom Ackerly

    Start up in Safe Mode.
    http://support.apple.com/kb/HT1455
    Best.

  • I'm running Windows7 on parallels desktop on my new MacBook Pro 13" retina display and I am getting a blue screen with error "bad pool banner". Any help in resolving this would be greatly appreciated.

    Can anyone help to resolve the "bad pool banner" issue please?

    Did you try the Parallels site, since it is Parallels you are having troubles with?

  • My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

    My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
    I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse.  I'll be working on my computer and the thing will freeze.  When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally.  Then I try safe mood and it will then boot just fine.  But there are blue stripes on my screen.  The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes.  I haven't tried reinstalling my software because I don't have the startup discs that came with my computer.  If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed.  I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either. 
    Does anyone else have experience with this?  Is it the firmware or what?  I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
    Please help... Thanks!

    I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them  the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

  • Blue screen with cursor at boot. And everything after that.

    Dear Forums,
    (Please note, I'll refer to the machine as a Server, but it is only using 10.4 client; I am merely using the Sharing capabilities of such).
    I have a MDD G4 that I'm using as a server. When I start it up, I get the Blue Screen with Cursor (BSwC) at boot - and it never goes past that. (Can't move the cursor either).
    I have read the articles
    http://docs.info.apple.com/article.html?artnum=106464
    And Dr. Smoke's
    http://www.thexlab.com/faqs/startupitems.html
    http://www.thexlab.com/faqs/repairprocess.html
    I've also tried AppleJack and clearing out caches, zapping PRAM, etc. All the standard fare.
    It will boot into safe mode just fine, and it is still acting as a server just fine.
    I have also tried Multiple Users (to no avail).
    I tried a reinstall of Tiger, which, interestingly enough, didn't give me the option for Archive and Install and Preserve, but instead only gave me the option to Upgrade (hm, from Tiger to Tiger). While this fixed nothing, the server continued to work after this.
    Then I had the bright idea to install the OS to the 2nd drive I had within. 'Surely this would work,' I thought. But alas. It did not. In fact, clean installation, new disk, (and yes, I booted from this 2nd disk), the same BSwC problem.
    So, please, Dear Apple Support Discussions, let there be someone out there smarter than I (I'm really not that smart, but I do follow instructions well).
    -Ty

    How long did you wait for the blue screen to go away? I also have a iMac G5 2GHz ALS.
    My computer has been having a problem where on the first boot of the day, it it would hang in the gray screen for about 1.5 minutes and the blue screen for about 4 minutes. I thought it was permanently hung but discovered that it would eventually present the login screen. I could then login normally but none of my firewire external drives would mount. I could restart over and over and the same situation would be present.
    Resetting the SMU seems to cure the problem and rebooting would be quick and all firewire drives mounted correctly. I could then reboot as many times after and normal behavior of the iMac would be repeatable.
    However after having the system down for several hours and restarting it, the problem would be back.
    I have now moved all my firewire drives to a powered hub and will watch over the next day or so to see if that changed anything.
    Robert

  • Blue screen with *** STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)

    HP Pavillion Elite m9150f PC
    Windows 7
    When I try to start my computer, I get a screen "Windows Error Recovery" and two choices "Launch Startup Repair (recommended)" and "Start Windows Normally".  No matter which one I choose, I get a blue screen  with "***  STOP:   0x000000A5  (0x0001000A, 0x00000000, 0x00000000, 0x00000000)".  I can't go any further.  Then, I turn off the computer.
    I restart the computer and choose F9-Diagnotics.  When this opens.  I see that the memory test has failed and has an error code of "BIOME-1"  and the suggestion to "Please contact HP Support".
    Prior to all of this happening, I reinstalled an antivirus program that I've been using for several years with no problems.
    So here I am.
    What do I do now?
    I'd appreciate your help.
    Thank you.
    Chris   
    This question was solved.
    View Solution.

    Here is the user guide.  http://h10032.www1.hp.com/ctg/Manual/c01152947.pdf
    Page 26 is the start of "Replacing memory"
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Blue screen with flashing folder and question mark on startup

    Hello.
    I need help with my Macbook Pro.  I get a blue screen with a flashing folder and a question mark at start up.  To date I have tried the following:
    Apple Hardware (Extensive) Test (Results:  "No Trouble Found")
    Safe Boot
    Reset NVRAM
    Reinstall OS X via the internet (I received no discs when I purchased it).  I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear.  When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk.  Startup Disk could not gather enough information on the selected disk."
    The only option is "Restart" from the Apple menu.  When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
    I have no Time Machine
    I can't access the disc utility.
    Are there any ideas as to what might be the problem?

    Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

  • Grey and Blue Screens with Spinning Pinwheel

    Mid 2009  Macbook Pro 13 inch  with Mac OSX Snow Leopard installed.  2.26 GHZ  4 GB   160 GB    Version 10.6.3 
    I got this dead Macbppk Pro from my daughter .  I put in a new battery and re-installed Mac OSX Snow Leopard from the licesned disc she bought so I could get rid of all her files and have free space and to make the Macbook now mine with my passwords etc. I got free support from Apple on how to install the disc and overwrite everything that was on it.
    Until now ... I get a Grey Screen with the Spinning Pinwheel for endless time.
    So the I tired the   Hold  Alt/ Option +  Command  + holding the P and R buttons while starting it up and got a Blue Screen with the spinning Pinwheel.
    Any Help on what to try next ?
    I only use it about once a month because I have a desktop.  Does using it only once a month harm anything ?  Should I be doing anything to not have this problem with it ?
    Or do I have to re-install the disc again and if so .... what would be the procedure to do so ( I forget )
    Thanks Eric

    Hi Eric,
    Thanks for visiting Apple Support Communities.
    If your MacBook Pro is only starting up to a blue screen with spinning pinwheel, reinstalling OS X may be necessary. I would recommend going through all of these steps first:
    Restart the computer in safe mode. If the computer successfully starts up in safe mode, choose Apple menu > Restart to see whether the computer will restart normally.
    Starting up in safe mode
    If you see the login window prompting you for a user name and password, but starting up doesn't progress, you may have incompatible login items.
    Eliminating incompatible login items
    Repair your startup disk or disk permissions by starting up from your Mac OS X installation disc and using Disk Utility.
    Repairing a disk
    Back up your disk and then reinstall Mac OS X by starting up your computer with your Mac OS X installation disc.
    Reinstalling Mac OS X
    From:
    Mac OS X 10.6: If you see a blue screen at startup
    Best Regards,
    Jeremy

  • Blue screen with error message

    Product Name: HP Media Center M7250n Desktop PC
    Product #ED842aa-aba
    I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
    This question was solved.
    View Solution.

    Hi,
           You are most welcome. 
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • LR6 bug - while recropping a pano with GPU enabled goive blue screen with cross

    Hi,
    I encountered a bug in LR6 related to GPU enabled. It does not happen when GPU is disabled. When first crop a picture (pano in this case) all goes well. However, when i want to recrop the picture i get a blue screen with cross. When i disbale the GPU feature, i can recrop. I am using the following GPU:
    GPU-info:
    Intel(R) HD Graphics 4000
    Check OpenGL support: Passed
    Vendor: Intel
    Version: 3.3.0 - Build 10.18.10.4176
    Renderer: Intel(R) HD Graphics 4000
    LanguageVersion: 3.30 - Build 10.18.10.4176
    Kind regards, Alexander

    Hi,
    I encountered a bug in LR6 related to GPU enabled. It does not happen when GPU is disabled. When first crop a picture (pano in this case) all goes well. However, when i want to recrop the picture i get a blue screen with cross. When i disbale the GPU feature, i can recrop. I am using the following GPU:
    GPU-info:
    Intel(R) HD Graphics 4000
    Check OpenGL support: Passed
    Vendor: Intel
    Version: 3.3.0 - Build 10.18.10.4176
    Renderer: Intel(R) HD Graphics 4000
    LanguageVersion: 3.30 - Build 10.18.10.4176
    Kind regards, Alexander

Maybe you are looking for