Upon updating 5.1 iphone 4 blacked out with white line through screen and nonstop vibrating

i was updating lastest version my iphone 4 through icloud until screen blacked out with white line in middle of screen and started vibrating non stop.
tried a hard and soft reboot NOTHING WORKED
phone died
put back on charger
same problem screen would brown out and fade to black.
now it won't turn on.
fed up #FIX

phone lost full charge upon charging again now i have colored lines running horizontal through screen then vertical.
hard restart does nothing again.
but its no longer vibrating.
seems like serious software issue.

Similar Messages

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • HT1430 The screen on my Itouch is erratic with white lines running up and down.  I tried restoring it and holding down on/off button and menu button for 10 seconds about 5 times.  Any ideas on if this can be fixed or am I out of an I touch.  Thank you.

    I need help with my Itouch Screen.  It's running erratic with white line running up and down.  Tried restoring and resetting but nothing works.  Any ideas?  I don't know how this happened.  Might have rubbed a smudge off screen while it was on.  Would this have broken it?  Can it be fixed?  Thanks, Arlene

    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              
    Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
      Apple - iPod Repair price

  • Can't move files - white circle with white line through it?

    OsX 10:4:10
    Suddenly I cannot move files from one drive to another, or from drive to desktop. Recently updated everything.
    White circle with white line through it appears.
    Network awaiting news footage. I'm stuck. What might this be?
    Any help would be most appreciated,
    Ben

    Hi megagram & dreed2,
    Thanks for staying with me on this.
    USB drive and errant file both have 'read and write' clicked. There is no 'ownership' choice in the info pop-up.
    Nor is there 'Ignore ownership on this volume' choice for the USB drive.
    I'm using an administrator account. I created a 'root' account, but it didn't seem to have any effect - didn't fix the problem. (I don't like messing around with 'root' account stuff.)
    I'm not running as a 'client in a Mac OSX Server environment'. Just as an 'admin' with the one tower and a rotating bunch of external drives (projects).
    I did a work-around for now ... shipped the 'unmoveable' file out to an ftp site (it would allow me to do this), and I haven't heard if the downloaded file is causing any problems on the other end (yet).
    If I come across a solution I'll post. It may have something weird to do with that funky drive (now returned to its owner), and me creating this particular file that same day as the funky drive was giving me problems. (Though the file was not ON the drive.)
    And the (almost new) computer did go down for a day last week ... would not reboot ... took it to the shop, nothing wrong with it, brought it home, it's been working fine ever since. Go figure.
    Thank you kindly for all your suggestions...
    Ben

  • When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application "Firefox" because it is not supported on this architecture.

    I have PowerBook G4, running 10.5.8. Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application “Firefox” because it is not supported on this architecture. Thanks for the help.

    Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/<br />
    http://tenfourfox.blogspot.com/ <br />
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  • My itouch has gone black blurry with white lines

    my i touch has a black screen with white lines and will not reset

    What happened whenyou tried to restore the iPod as suggested in the article I refernced:
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane.
    If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • Why can i watch videos from safari online while in 3g area but when at home connected to wi-fi the video screen comes up with a play button with a line through it and doesnt let you watch video

    i can not watch videos while at home and connected to wi-fi. when i touch the video i want to watch a screen comes up with a play symbol with a line through it. i can disconnect from the wi-fi and go to 3g and the video will play. this is happening when i go to safari and try to watch a online video.

    here's the info you needed:
    windows xp professional
    mozilla 3.0.19
    explorer 8.0.6001.18702
    still having the same problem unfortunately.  i appreciate your help thus far and hope you have more info.  thanks a lot.

  • I go to tools then options when I try to open saved passwords it brings up a red circle with a line through it and wont open

    I go to tools and the options and I can't open any of the tabs at the top Eg I go to exceptions and I get a red circle with a line through it.This is the same for all of the options that have exceptions and saved passwords.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Encore / Images Blacked out with RED line on top

    New at this. I have 1.67gb left in my project. (I have a lot of photos) Any way when I add more (Shift / Ctrl / g ) When I look at the bottom Left where the slides show up I just loaded 2 of the 60 photos I can see but the other 58 are black. All 60 have this red line above them.
    Can anyone teach me what's going on here:)
    THANKS

    Joseph,
    You are possibly (note: "possibly") on the right track with the elimination of each slide show, until you find the one that is "possibly" causing the problem.
    Get a spool of DVD-RWs (rewritables), and do a Project with one of your slide shows, then burn to DVD-RW and test that. Does all work as it should? In that Project, add another slide show, repeat the DVD-RW burn again. Still OK? Add another, and another. If the process hangs, errors out, on one, check it completely to see if you can spot a problem with it. Sometimes, it's some tiny glitch that ruins the whole Project, and you have to spend some time searching through tons of good assets, just to find the offending one, or ones.
    As for the size concern, take a look at the Disc Tab in your Project Panel. There will be a diagram of the DVD with the used portion colored in. Does it show that you still have room? If not, check the CD-ROM area, just below, to see if you accidently added some content there. If you have exceeded the capacity of a 4.7GB DVD, Encore should give you an error message, suggesting that you go with a DVD-9 (Dual Layer), instead of a DVD-5.
    Question: where did you get the info, that you still have 1.38GB of space on this Project, the Disc Tab in the Project Panel? If so, that should tell you that you DO have room, i.e. the Project is not too large. It would then follow, that you likely have some problem and my first statements might help you track these down.
    Good luck,
    Hunt
    [EDIT] PS, Harm is only trying to help you explain your problem in enough detail, so that the folk who hang out here, can, in turn, help you solve your problem. As you can see from my response, I'm doing a lot of guessing, and much/all of it might be wrong. With more detail (per Harm's link), others will see what you started with, what you have done so far, and maybe even some hardware issues. The first couple of folk, who responded to you, are some of the best on this board.

  • New icon on screen - yellow circle with white lines with a 1 next to it - what is it please?

    Hi.
    New to hear so please bear with me..
    i have had my blackberry for about a month and a new icon has appeared (next to where the message icon normally sits). It shows a '1' next to a yellow circle with white lines through it.. I have a feeling it is to do with email but dont know what it is or how to get rid of it... i have no new messages waiting to be read ...
    your help would be much appreicated.
    Regards
    Sutton237
    Solved!
    Go to Solution.

    Check your WAP or Browser push messages.
    Messages folder > Options > View Folders, then look in both your WAP push and Browser push folders.
    Read and clear the message.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 8703e shows a circle with line through it and box behind. Will not turn on. NEED HELP!!

    My wife just got this BB and has been working great, when all of a sudden there isa circle with a line through it and a box in the center of it with a cirle, square, and a triangle inside the box.  We have tried removing the battery to no avail.  Talked with a person at one of the local stores and he said I need to download the desktop manager.  I did that, but it will not connect to phone.  Any suggestion?
    Solved!
    Go to Solution.

    Check the link

  • I get a cirlcle with a line through it a start up but nothing else

    When I go to boot up I can hear a chime the apple appears then a cirle with a line through it and nothing else. What should I do to get it to start?

    Try this support article >  Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts

  • My Mac has a circle with a line through it when I try to turn it on it's plugged in to a charged but will not go past this point and no startup chime

    When I try to turn on my Mac it has the apple symbol that later turns into a circle with a line through it and it won't turn on I need help.

    Go step by step and test.
    Restart.
      http://support.apple.com/kb/ts2570
    Startup in Safe mode
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset PRAM: http://support.apple.com/kb/ph14222
    Reinstall OS X
    http://support.apple.com/kb/PH13871

  • Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

    Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
    So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
    Thank you for your help and time.
    Regards,
    hopeless

    If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

Maybe you are looking for

  • New Non-ASM Standby Trying to use ASM during recovery

    Oracle 11.2.0.3 on RH6 x86_64. Cross-posting from oracle-l. We have a database on ASM. We want to migrate to filesystem storage on same host (Oracle ZFS). Recommended path from Oracle is to create a standby and then do a failover when ready. Simple e

  • Multiple Application Interactions In Bpel

    Hello, I developed a composite like [http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bp_interact.htm#BABCHDGI] . I developd 3 Proceses(AsynchBpelProcessA.bpel,AsynchBpelProcessB.bpel,AsynchBpelProcessC.bpel) Porblem when ever i invoke "AsynchBpel

  • Can anyone explain these network log enteries to me.

    Although my profile says leopard/macpro this relates to a g5 running 10.4.11. I just discovered the firewall has been off. The machine has been behaving very eratically recently in spite of a clean verify disk/permissions clean. We had aq kernal pani

  • After Effects CS6 Performance issues

    Hello all. Well, got three new mac pro 12 core systems all running 65 - 128gigs of ram with Quadra 4000 GPU cards, up to date drivers, up to date AECS6 and dedicated 500 gig solid state drives for global cache. Their all set-up according to Adobe spe

  • MC within a MC problem

    Alrighty then i have a bit of a problem, i'll lay it down as simple as possible. I am doing a website for someone, the buttons are smiley faces. What happens when you mouse over is 2 things, (or atleast are supposed to) the figure bounces and plays i