Uppercase commas with footnotes and endnotes?

In some non-fiction Pages documents I want to add endnotes citing scientific papers written by others that support the statements I am making.
I know how to do this by adding footnotes or endnotes through the Inspector and I know how to have those numbers be consecutive. So far so good.
When I add two footnote numbers, such as 1 and 2, those smaller-font numbers sit in the top area of the line. So far so good.
But....if I want to add a comma between the numbers, that commas ends up on the bottom part of the sentence line where commas and periods
normally land. That's not where I want the commas.
How do I add a comma, or hyphen for that matter, between the two smaller-font footnote numbers, without that comma or hyphen ending up
underneath those footnote numbers?
Thanks
Panther

Jerry,
If no one told you today, yet, that you are a genius, then you have now been told!
Thank you so much for coming up with a solution that makes me look GREAT in the eyes of my wife because she is the one writing the scientific paper.
This problem is officially solved and I will punch the nose of anyone who says differently!
Panther

Similar Messages

  • How to place footnotes and endnotes on the same page?

    I have a word document with nearly about 64 footnotes and 500 endnotes. Endnotes are basically references guiding to other sources which are quoted in the book.
    My client has asked me to place all endnotes (references) of each page at the bottom of the page itself along with footnotes, but they shouldn't merge with footnotes. The reason for that he related that it makes easier for the reader to check the reference of the quote immediately at the bottom of the page, instead of flipping over all the pages and going to the end of the book everytime.
    How to do this? Can anyone enlighten me?

    Endnote placeholders are usually customizable to wherever you want them to be.
    How to do this? Can anyone enlighten me?
    I'm not sure if you're asking this question from a aesthetic design perspective or from a functionality perspective.
    Either way, I guess this link should give you some clarity: http://carijansen.com/2010/11/13/footnotes-and-endnotes-with-indesign/
    Also, there is already a thread in this forum that should answer your question - http://forums.adobe.com/thread/681891
    You may also want to review these links for cross-referencing that cuts down lot of time which came out in CS4 by request:
    http://www.adobe.com/designcenter-archive/indesign/articles/lrvid4024_id.html
    http://www.adobepress.com/articles/article.asp?p=1332860&seqNum=5
    Message was edited by: Sudarshan Thiagarajan
    Reason: A couple of more links to detail cross-referencing feature

  • Can you use footnotes AND endnotes in the same document?

    I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09?  I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)...  I would appreciate any suggestions!  Thanks!

    The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
    You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
    That would be the only workaround I can think of.
    Peter

  • Footnotes and Endnotes greyed

    I am trying to add endnotes to my document but I cannot select the drop down menus to do so. I tried adding a superscripted number first, selecting and unselecting text, but I cannot click the drop down menu.
    Any thoughts??

    The difference is logical.
    Notes apply to the main text layer of Word Processing documents.
    There is no such a layer in a Layout document.
    Every text block has the same status.
    I agree that some explanations in the Help are not precise enough and fail to make the difference.
    Yvan KOENIG (from FRANCE mardi 5 août 2008 19:20:53)

  • Importing MS word files with footnotes

    Laying out a textbook. Client provided formatted text. The footnotes travel with the text as I edit which is great. However, I do not want the rule that separates the footnote from the text. I've searche ID and MS Word high and low to see how to get the rule to not appear. Any ideas or can it not be done without having to placing the files without formatting and starting from the ground up in ID? See link for screen shot. Thanks.
    http://www.pelhamprint.com/uploads/footnotes.jpg

    Hi there, I'm working with InDesign CS (I bought it a few years ago now, so its not the most current). I am trying to import a word doc with footnotes, but they will only import as endnotes, even though I have selected the import option for 'footnotes and endnotes'. I am doing a 50,000 work book, so I'd like each footnote to be at the bottom of each relevant page for easier reading. It should be very simple but I have no idea how to get around this. As usual, I have an impending deadline, so any advice or feedback or ideas would be greatly appreciated.
    BTW Clearly I am not a computer guru, so 'scripting' etc would be way too complicated for me.
    Cheers :-)

  • Newbie Mac User--Opening .docs with footnotes

    I am a recent convert to Mac, but my co-authors are still using Windows and Word. I have not been able to successfully open a Word document with footnotes in Pages, Text Edit, or NeoOffice. They are all at the end of the document rather than the bottom of the page. I have gone to "tools--footnotes" in NeoOffice, but it did not help. Does anyone have a solution in Pages?

    I'm afraid that the notes are not treated as notes but as a supplement to the main doc.
    May you attach a sample .doc file to a mail and send it to:
    koenig PERIOD yvan AT tele2 PERIOD fr
    I will look at the way it behaves.
    For your work, it would be interesting to try to use the FREE openOffice or neoOffice.
    I know that both are able to create footnotes and endnotes but I don't know if they import correctly those created in the µSoft's Office.
    Yvan KOENIG (from FRANCE jeudi 5 juin 2008 20:58:34)

  • Problem with Finder and Menu Fonts (uppercase A)

    Hello --
    I'm having a problem with fonts. All the characters that appear under icons in the Finder or in the menu for any application appear as uppercase As with boxes around them. There appears to be one uppercase A for each character that should be there. If I click-pause-click to edit the filename in the Finder, the text appears normal during the duration of the change, and then reverts to uppercase A with a box around it again. All other operation of the computer is normal.
    I was watching and downloading video files in iTunes when the problem appeared. When I pressed ESC to exit full-screen mode, the Finder said that my start-up disk was almost full, and I saw the font problem. Upon investigating, I discovered that my start-up disk was completely full (and the download had failed), so the first thing I did was move some video files to an external drive, which freed about 5 GB.
    Since freeing the space, I've tried the following to fix it, in this order:
    1. booted from Tiger CD to run Repair Disk from Disk Utility
    2. rebooted from the boot hard drive to run Repair Disk Permissions from Disk Utility
    3. run through Disk Warrior
    4. created a test admin user and logged in as that user
    5. removed font cache files using terminal
    6. booted in safe mode, logged in as myself, and then rebooted normally
    None of these actions has had any effect. The computer is still operating normally, except for the characters that don't display correctly.
    I'm running 10.4.6 on a Titanium Powerbook 500 MHz with 512MB RAM. A few months ago, I replaced the internal hard drive with an 80GB Seagate.
    Tibook 500   Mac OS X (10.4.6)  

    Hi again, zoobieboots —
    I appreciate your initiating a new thread. Your post here helps to make the situation much clearer than in bmewolf's thread — particularly in terms of what you've already tried. Thanks again.
    A few initial thoughts —
        (a) As I was trying to suggest previously, you're apparently operating (after moving some files to an external drive) with ~6-10% (?) free disk space. Particularly given that you were working with large video files when this appeared, File fragmentation would be expected. While I haven't heard of this particular symptom resulting from fragmentation, that would be a concern to me — particularly since this immediately preceded the problematic behavior.
    I've read some good reports about iDefrag, but haven't used it myself. A demo version is apparently available for HDs < 100GB. But you'd presumably need to free significantly more space first (you haven't actually said whether 5GB or ?? is the total available now). Having never experienced severe fragmentation, I don't fully understand its consequences — but another participant may be able to explain this.
        <b>(b) You don't mention trying to troubleshoot potentially corrupt or incompatible fonts (or font caches), also as outlined in the other thread. As I suggested there, The X Lab's "undoing Font Book" FAQ is a useful resource in this.
        (c) Although I agree it may be an unsatisfying "solution," an Archive & Install did work for bmewolf in the case that you've indicated matches yours closely.
    I hope one of these suggestions is helpful. Please post back to discuss your progress.
    Regards,
    Dean

  • Problem with sqlldr and commit

    Hi,
    i have a problem with sqlldr and commit.
    I have a simple table with one colum [ col_id number(6) not null ]. The column "col_id" is primary key in the table. I have one file with 100.000 records ( number from 0 to 99.999 ).
    I want load the file in the table with sqlldr ( sql*loader ) but i want commit only if all records are loaded. If one record is discarded i want discarded all record of file.
    The proble is that in coventional path the commit is on 64 row but if i want the same records of file isn't possible and in direct path sqlldr disable primary key :(
    There are a solutions?
    Thanks
    I'm for the bad English

    This is my table:
    DROP TABLE TEST_SQLLOADER;
    CREATE TABLE TEST_SQLLOADER
    (     COL_ID NUMBER NOT NULL,
         CONSTRAINT TEST_SQLLOADER_PK PRIMARY KEY (COL_ID)
    This is my ctlfile ( test_sql_loader.ctl )
    OPTIONS
    DIRECT=false
    ,DISCARDMAX=1
    ,ERRORS=0
    ,ROWS=100000
    load data
    infile './test_sql_loader.csv'
    append
    into table TEST_SQLLOADER
    fields terminated by "," optionally enclosed by '"'
    ( col_id )
    test_sql_loader.csv
    0
    1
    2
    3
    99999
    i run sqlloader
    sqlldr xxx/yyy@orcl control=test_sql_loader.ctl log=test_sql_loader.log
    output on the screen
    Commit point reached - logical record count 92256
    Commit point reached - logical record count 93248
    Commit point reached - logical record count 94240
    Commit point reached - logical record count 95232
    Commit point reached - logical record count 96224
    Commit point reached - logical record count 97216
    Commit point reached - logical record count 98208
    Commit point reached - logical record count 99200
    Commit point reached - logical record count 100000
    Logfile
    SQL*Loader: Release 11.2.0.1.0 - Production on Sat Oct 3 14:50:17 2009
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Control File: test_sql_loader.ctl
    Data File: ./test_sql_loader.csv
    Bad File: test_sql_loader.bad
    Discard File: none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 0
    Bind array: 100000 rows, maximum of 256000 bytes
    Continuation: none specified
    Path used: Conventional
    Table TEST_SQLLOADER, loaded from every logical record.
    Insert option in effect for this table: APPEND
    Column Name Position Len Term Encl Datatype
    COL_ID FIRST * , O(") CHARACTER
    value used for ROWS parameter changed from 100000 to 992
    Table TEST_SQLLOADER:
    100000 Rows successfully loaded.
    0 Rows not loaded due to data errors.
    0 Rows not loaded because all WHEN clauses were failed.
    0 Rows not loaded because all fields were null.
    Space allocated for bind array: 255936 bytes(992 rows)
    Read buffer bytes: 1048576
    Total logical records skipped: 0
    Total logical records read: 100000
    Total logical records rejected: 0
    Total logical records discarded: 0
    Run began on Sat Oct 03 14:50:17 2009
    Run ended on Sat Oct 03 14:50:18 2009
    Elapsed time was: 00:00:01.09
    CPU time was: 00:00:00.06
    The commit is on 992 row
    if i have error on 993 record i have commit on first 992 row :(
    Edited by: inter1908 on 3-ott-2009 15.00

  • I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter

    I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter #s above each section of endnotes. How do I do this, please?

    I have precisely the same problem and am wondering if anyone has found a workaround for what seems to be a bug or an unattended issue in Pages. Hopefully the next update (whenever it arrives, I hope it arrives soon) will take care of this.

  • Footnotes from EndNote

    So, I have all of my references in an EndNote file, and I am now using them in my Pages document. I know that I can do the references page with this, but as far as in-text citations are concerned, I was wondering if I could do footnotes using EndNote input. And if I can do this, how would I go about doing that? Thanks!

    Create the footnote first and then put the citation into the footnote. Endnote cannot access the Insert Footnote command, so you do that then insert the reference you want there.

  • Footnotes and Bibliography?

    It appears that Apple has overlooked the ability to create footnotes and a bibiography in iBooks Author. (yet it's specifically targeted at the academic textbook market) Can this possibly be true???

    I accidentally found out that iBooks Author will support footnotes! But you have to create them in another application first.
    So here's my story. I use Scrivener 2.2 to create my books. But I really want to use iBooks Author to spice up the final product. I had text for a book typed in Scrivener, with footnotes already created. I copied and pasted them into iBooks Author and lo and behold, all of the footnotes were insterted at the end of the section in iBooks Author as endnotes!
    The footnote numbers appeared by the text, and then at the end of the section, the footnote number appeared along with the note, I was also able to go to a footnote and decrease the size of the footnote number (which I like to be smaller than the chapter text). Heck, I'll just show you...
    Here are screenshots (it's an old journal of my that I am footnoting). First screenshot is what it looks like in Scrivener, text on the left, footnotes on the right:
    I naïvely copied and pasted this text into IBooks. Lucky for me, this is how it came out in iBooks Author:
    I didn't realize that I had found a work-around for this footnote problem until I tried adding more footnotes while working in iBooks Author (which led me to these posts). So here's proof that if you create footnotes in another program, at least iBooks Author will recognize and create footnotes for you and put them at the end of the section. I figure it's better than nothing, but not very elegant for such an elegant program. Again, I am also able to change the font size of any footnote number or the text in a footnote.
    By the way, if you use this copy and paste method, just make sure you copy and paste an entire chapter all at once. When I copied and pasted paragraph by paragraph, it reordered the numbers back to footnote 1 in each paragraph, and you don't want to re-number them by hand.
    If anyone else has tried copying and pasting with another word processor with the same result, please let us all know.
    You might be thinking, what's the point of all of this if I have to use two word processors? I think of iBooks Author as my last step, not a word processor. I don't plan on creating my book drafts in it (I've tried, I don't think it's very efficient), I've decided I just want to use iBoooks Author to layout the final content that I created using another word processor, one that has all of the tools I need for efficient writing. Pages, Word or maybe even TextEdit might also work for writing your draft. Since the stuff I write needs footnotes or endnotes, I really don't know of any other options at present if I want to use iBooks Author.

  • Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3

    Hello,
    I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
    I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
    As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
    Please guide me to resolve the problem.
    C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
    Do you wish to run the CRS evaluation installation? [Y/N]: y
    Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
    The CRS evaluation install will attempt to create the database. Press [Return] t
    o continue or any other key to quit:
    Enter mysql database connection details
    Enter user name: admin
    Enter user password: admin
    Enter database name: crsprod
    Enter 'root' user password:
    Creating database...
    Finished database creation
    Enter weblogic admin server URL: http://localhost:7001
    Enter weblogic admin server username: weblogic
    Enter weblogic admin server password: weblogic123
    Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
    all:
    [copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
    [delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
    cim.tmp
    BUILD SUCCESSFUL
    Total time: 0 seconds
    Application Server: weblogic
    The following installed ATG components are being used to launch:
    ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
    Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
    Nucleus running
    atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
    (Searching for products... done.)
    atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
    atg.cim.productconfig.appserver.AppServerSelectTask starting...
    atg.cim.productconfig.appserver.AppServerSelectTask finished.
    atg.cim.productconfig.appserver.AppServerPathTask starting...
    atg.cim.productconfig.appserver.AppServerPathTask finished.
    atg.cim.productconfig.appserver.DomainPathTask starting...
    atg.cim.productconfig.appserver.DomainPathTask finished.
    atg.cim.productconfig.appserver.UrlTask starting...
    atg.cim.productconfig.appserver.UrlTask finished.
    atg.cim.productconfig.appserver.UsernameTask starting...
    atg.cim.productconfig.appserver.UsernameTask finished.
    atg.cim.productconfig.appserver.PasswordTask starting...
    atg.cim.productconfig.appserver.PasswordTask finished.
    atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
    atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
    atg.cim.database.CreateSchemaTask starting...
    atg.cim.database.CreateSchemaTask finished.
    atg.cim.database.ImportDataTask starting...
    Combining template tasks...Success
    Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
    /CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
    icing/priceLists/PriceLists
    /CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
    oreRepository
    /CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
    catalog/ProductCatalog
    /CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
    ce/pricing/priceLists/PriceLists
    /CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
    pository
    /CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
    iteRepository
    /CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
    atalog/ProductCatalog
    /CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
    pository
    /CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
    ts/Giftlists
    /CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
    entory/InventoryRepository
    /CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
    ofileAdapterRepository
    /CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
    OrderRepository
    /CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
    rder/OrderRepository
    /CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
    tores/StoreRepository
    /CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
    e/claimable/ClaimableRepository
    ... > Success
    All Imports Completed Successfully
    atg.cim.database.ImportDataTask finished.
    atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
    atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
    atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
    atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
    atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
    atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
    atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
    atg.cim.productconfig.appassembly.EarFileNameTask starting...
    atg.cim.productconfig.appassembly.EarFileNameTask finished.
    atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
    Error Executing Batch File
    atg.cim.worker.TaskException: Error deploying to weblogic
    atg.cim.worker.TaskException: Error exececuting batch file
    at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
    130)
    at atg.cim.Launcher.startCimFlow(Launcher.java:278)
    at atg.cim.Launcher.main(Launcher.java:99)
    Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
    at atg.cim.worker.Task.handleException(Task.java:72)
    at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
    execute(OnlineCreateServerInstanceTask.java:159)
    at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
    pl.java:150)
    at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
    (HeadlessExecutorImpl.java:140)
    at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
    tchChooserExecutor.java:169)
    at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
    at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
    120)
    ... 2 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
    error occurred while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
    red while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
    at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
    tHelper.java:541)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:394)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
    utionWrapper.java:167)
    at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
    at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
    execute(OnlineCreateServerInstanceTask.java:155)
    ... 7 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
    error occurred while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
    at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
    tHelper.java:541)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:394)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:391)
    ... 20 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
    1
    at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
    at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
    at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:391)
    ... 34 more
    Nucleus shutting down
    Nucleus shutdown complete
    Thanks.

    This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
    http://localhost:7001 instead of t3://localhost:7001
    Thanks.

  • Problem with focus and selecting text in jtextfield

    I have problem with jtexfield. I know that solution will be very simple but I can't figure it out.
    This is simplified version of situation:
    I have a jframe, jtextfield and jbutton. User can put numbers (0-10000) separated with commas to textfield and save those numbers by pressing jbutton.
    When jbutton is pressed I have a validator which checks that jtextfield contains only numbers and commas. If validator sees that there are invalid characters, a messagebox is launched which tells to user whats wrong.
    Now comes the tricky part.
    When user presses ok from messagebox, jtextfield should select the character which validator said was invalid so that user can replace it by pressing a number or comma.
    I have the invalid character, but how can you get the focus to jtextfield and select only the character which was invalid?
    I tried requestFocus(), but it selected whole text in jtextfield and after that command I couldn't set selected text. I tried with commands setSelectionStart(int), setSelectionEnd(int) and select(int,int).
    Then I tried to use Caret and select text with that. It selected the character I wanted, but the focus wasn't really there because it didn't have keyFocus (or something like that).
    Is there a simple way of doing this?

    textField.requestFocusInWindow();
    textField.select(...);The above should work, although read the API on the select(...) method for the newer recommended approach on how to do selection.
    If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
    see http://homepage1.nifty.com/algafield/sscce.html,
    that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
    Don't forget to use the "Code Formatting Tags",
    see http://forum.java.sun.com/help.jspa?sec=formatting,
    so the posted code retains its original formatting.

  • ADF: Problem with List and ListOfValues bindings

    In my page I have panelSplitter.
    In first facet I have panelCollection with ADF tree. For the tree definition I have Iterator binding, which contains the elements with no parent and one accessor, which define a recursive master-detail hierarchy. For the tree node I have specified TragetIterator property, that look up second iterator binding, which containes all tree elements (parents and their children).
    In second facet I have panelForm with input fields, based on second iterator binding. So when the user clicks on any node in the tree, it can see and edit in input fields the data for this node.
    In panelCollection I have placed two buttons to create a new node and to delete current node.
    By creation of new node I do the following:
    1) From currently selected node I get the value of one attribute named Code, which is alternate unique key;
    2) From second iterator binding I get the ViewObject, create a new Row and for the "parent" attribute I set the value derived from step 1.
    3) I rerender through PPR tree component and PanelForm with input fields.
    As result I have a new empty node in the tree and empty input fields in second facet, which must be populated and submitted (commited).
    My problem happens after I populate all fields in panelForm, when I commit changes (press Button with Commit action binding) and rerender page content. The exception, which is trown is listed below.
    I want to make the follwing additional remarks:
    1) My primary key in ViewObject is ROWID. I need this attribute to uniquely identify created new rows.
    2) The problem happens only when in panelForm I have field based on Model driven List or ListOfValues binding (<af:selectOneChoice> or <af:inputListOfValues>).
    When I create a new row the ADF BC assign to it one "dummy" ROWID (for example 317499) and after Commit this ROWID is replaced wtih actual ROWID from database. But I don't understand, why after commit of changes on the page the method findByKey of oracle.jbo.server.ViewObjectImpl is called with initial "dummy" ROWID (317499)?
    When there is no field based on List or ListOfValues binding, then there are no calls of findByKey method and there is no such problem.
    And that is the exception:
    2009-7-29 18:04:54 oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
    WARNING: ADFc: ORA-01410: невалиден ROWID
    oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT OU.CODE, OU.NAME, OU.ABBREVIATION, OU.ORGUNIT_TYPE, OU.PARENT_UNIT, OU.IS_VALID, OU.ROWID FROM ORG_UNITS OU WHERE (OU.ROWID = :1)
         at oracle.jbo.server.BaseSQLBuilderImpl.processException(BaseSQLBuilderImpl.java:3837)
         at oracle.jbo.server.OracleSQLBuilderImpl.processException(OracleSQLBuilderImpl.java:4621)
         at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1150)
         at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:762)
         at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:5681)
         at nsi.isbs.dmc.common.IsbsViewObjectImpl.executeQueryForCollection(IsbsViewObjectImpl.java:56)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1005)
         at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1162)
         at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1082)
         at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1076)
         at oracle.jbo.server.ViewObjectImpl.retrieveByKey(ViewObjectImpl.java:13994)
         at oracle.jbo.server.ViewObjectImpl.retrieveByKey(ViewObjectImpl.java:13758)
         at oracle.jbo.server.ViewObjectImpl.retrieveByKey(ViewObjectImpl.java:13752)
         at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:4891)
         at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:4679)
         at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:4673)
         at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:9456)
         at oracle.jbo.server.ApplicationModuleImpl.getListBindingName(ApplicationModuleImpl.java:8421)
         at oracle.adf.model.bc4j.DCJboDataControl.getListBindingName(DCJboDataControl.java:2244)
         at oracle.jbo.uicli.binding.JUCtrlListBinding.initDefFromServerBinding(JUCtrlListBinding.java:2366)
         at oracle.jbo.uicli.binding.JUCtrlListBinding.getAttributeDefs(JUCtrlListBinding.java:2327)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:497)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:487)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.isInternalAttributeUpdateable(JUCtrlValueBinding.java:3262)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.isAttributeUpdateable(JUCtrlValueBinding.java:1617)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.isAttributeUpdateable(JUCtrlValueBinding.java:1695)
         at oracle.jbo.uicli.binding.JUCtrlValueBinding.isUpdateable(JUCtrlValueBinding.java:2512)
         at oracle.jbo.uicli.binding.JUCtrlListBinding.isUpdateable(JUCtrlListBinding.java:3357)
         at oracle.adfinternal.view.faces.model.AdfELResolver._isReadOnly(AdfELResolver.java:85)
         at oracle.adfinternal.view.faces.model.AdfELResolver.isReadOnly(AdfELResolver.java:101)
         at javax.el.CompositeELResolver.isReadOnly(CompositeELResolver.java:353)
         at com.sun.faces.el.FacesCompositeELResolver.isReadOnly(FacesCompositeELResolver.java:113)
         at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:128)
         at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:230)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:400)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.wasSubmitted(EditableValueRenderer.java:341)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.decodeInternal(EditableValueRenderer.java:113)
         at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase.decodeInternal(SimpleInputListOfValuesRendererBase.java:88)
         at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.decodeInternal(LabeledInputRenderer.java:55)
         at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:236)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1089)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decode(UIXComponentBase.java:714)
         at oracle.adf.view.rich.component.UIXInputPopup.processDecodes(UIXInputPopup.java:134)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ApplyRequestValuesCallback.invokeContextCallback(LifecycleImpl.java:1113)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:722)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:153)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:153)
         at oracle.adf.view.rich.component.fragment.UIXPageTemplate.invokeOnComponent(UIXPageTemplate.java:208)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:664)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:303)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:181)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:85)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:257)
         at oracle.security.jps.wls.JpsWlsSubjectResolver.runJaasMode(JpsWlsSubjectResolver.java:250)
         at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:100)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:65)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.sql.SQLException: ORA-01410: невалиден ROWID
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:116)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:177)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
         at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:891)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1490)
         at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1040)
         ... 104 more
    ## Detail 0 ##

    I have resolved my problem. I have changed the type of list binding to be Dynamic List (not Model Driven List).

  • CAn anyone help me with MAIL and my earthlink account?

    I've had DSL with Earthlink for several years now and never had connection problems. In the past two weeks, however, MAIL will sometimes fail to send email and sometimes fail to retrieve email from my Earthlink webmail account. The strangest thing is that this happens intermittently, even though no settings have been changed. Most of the time I can retrieve email, but other times I get the error message that "port 110 has timed out". Most of the time, I cannot send email, but other times the email shoots right through when I open mail.
    I called Earthlink about this and we set up my MAIL program step by step according to Earthlink guidelines. Unfortunately, this did not help the matter.
    My MAIL preference settings are as follows:
    My incoming mail server is pop.mindspring.com on port 110.
    My outgoing mail server is smtpauth.earthlink.net. The outgoing server port is 587. SSL is not checked. Authentication is by password.
    All of these settings are correct according to the Earthlink tech.
    If this matters, my G5 is connected wirelessly to an Airport Express base station.
    Again, I'm puzzled that I've only just begun to have these issues and they seem to happen randomly.I also see that similar discussions have been had on this forum with Earthlink and MAIL, but I don't see any resolutions. Can anyone shed some light on this? Thanks.
    Message was edited by: Kevin Robinson
    Message was edited by: Kevin Robinson

    I had problems with my Earthlink DSL quitting about a month ago. I went through some of the same Earthlink tech support troubleshooting hoops, hooking directly into my ethernet port not into the Airport etc. Eventually an Earthlink senior tech said my Netopia modem was defective. After some financial haggling they sent me a new Zycel modem, that didn't work either. Earthlink made an appointment and sent out an AT&T tech to the house. He hooked in and said it was a defective phone company circuit board. The AT&T tech called in for the phone company to change the circuit board now both the Netopia and Zycel modems work.
    Note: while checking the line, the AT&T tech it my DSL line was sending one protocol it would work if my modem was set up to receive it. (protocol is my word I don't remember his exact word).
    Another Note: Also when Earthlink wanted to replace my modem they wanted my to pay (the dollar amounts are approximate) $80 for an new modem, or get a free modem with an exorbitant $40 shipping fee and commit to an other year of service. I eventually bargained down to a free modem, free shipping and $20 off the monthly fee.

Maybe you are looking for