Uprez Settings, 640x480 SD to HD

I'm using FCPX 10.1.1 to create a movie using old 640x480 SD video clips ripped from personal DVDs that were deinterlaced and converted to 720x480 ProRes 422 HQ using Mpeg Streamclip. I now want to create an HD project in FCPX10.1.1 but I want to uprez the clips as much as possible without buying an expensive hardware upconverter. I tried installing a trial version of RedGiant Instant HD for FCPX, but it hasn't been updated to 10.1.1 yet, so that's not an option right now.
I've searched for other software solutions, and there were some suggestions for using Compressor 4.1 to 'upconvert.' I understand that it's never going to look like it was mastered in HD (aside from the obvious 4:3 aspect ratio), but I'm wondering how much improvement can be gained, who's done this and what are the best Compressor settings? Any improvement in quality will help and I'll take what I can get.
Jeff

The way to do this is to test a representative section of your video and to compare image quality from one iteration to the next. Use the Resize Filter @  Best. I would use Pro Res 422. Seriously doubt that Pro Res HD will make a difference.
Russ

Similar Messages

  • Snapz Pro X screen capture Movies into FCEHD

    I make educational tutorials for educators. I also created a weekly vodcast/show with a FCE HD intro. I wish to import the SnapzProX 2.0.3 (SP) vids into the FCEHD intro and export for vodcast for web streaming. My vodcast will premeir in the fall of 2007.
    I found that SP seems to best export to FCEHD as an animated movie file. However, I am unsure of how to get the best quality mp4 when exporting from FCEHD. What are the best settings to get a 640 X 480 web video. I can go smaller, but in many cases my teachers wish to see a larger video so they can read the text on the screen. Am I stuck with a tiny 320 x 280 window for tutorials on the web?
    I tried manually upping the size when exporting to mp4 and the video was extremely blurry.
    File size is an issue... my tutorials are short (about 2-5 minutes) annd I wish to keep them under 20MB.
    I watch Atomic learning vids (www.atomiclearning.com)that are fairly clear and can stream from the web. I called them and they also use Snapz ProX for screen capture.
    Any ideas on how to export from FCEHD to the web and still have a fairly clear video?

    The codec with the best quality to size ratio is H264. This is what the trailers on Apple's quicktime site are made with, and is capable of very high quality results with (relatively) small file sizes. However, it requires that people have Quicktime 7 installed in order to view it. To support older versions of Quicktime, I would next recommend the mpeg4 codec at around 300Kb/s. You might have some trouble staying under 20MBs at 640x480, though.
    You mentioned blurry video when you uprezed to 640x480. You must remember to always convert from your highest resolution. If you converted a file from 320x240 to 640x480, it will get very distorted and pixelated. Also, if you're coming out of SP at a resolution smaller than 640x480, you will also get bad results. Remember to always record at the highest resolution/quality possible.
    There is never any one size fits all here. It all depends on what the source material is (graphics and low movement always compress better than live action and high movement. Screen text tends to compress poorly), and what the needs of your viewers are (size vs bandwidth). So your best bet would be to run a lot of tests with a multitude of configurations on a short sample of your project. Then pick the one that seems most suitable.
    Mac Pro 2.66Ghz - 3GBs RAM - X1900XT   Mac OS X (10.4.8)  

  • [SOLVED] Kernel panic - unable to mount root fs

    I'm having some trouble with my Toshiba NB255 netbook. It no longer boots after I performed a major pacman upgrade. It hangs with this error message:
    http://imgur.com/Cxj1z
    I did some research and found a couple of threads with problems similar to mine:
    https://bbs.archlinux.org/viewtopic.php?id=98771
    https://bbs.archlinux.org/viewtopic.php?id=98496
    From what I could tell, both had something to do with the initrd, but I'm not sure what to do in my specific situation. Additionally, according to my pacman.log the initrd was updated successfully during the upgrade. I did, however, also recently install some stuff to try to get my iPhone to tether to the netbook over USB (
    menu.lst: (the "root=" part of the first option was originally in the disk-by-uuid format, I changed it trying to fix the issue)
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # [url]http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution[/url]
    # general configuration:
    timeout 2
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sda3 resume=/dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/0c38b0a8-2ce1-4b16-b902-3d9f0cc8b2cc ro
    initrd /kernel26-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    dmesg.log:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003f5d0000 (usable)
    BIOS-e820: 000000003f5d0000 - 000000003f5e0000 (ACPI data)
    BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
    BIOS-e820: 000000003f5e3000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x3f5d0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask 0C0000000 write-back
    1 base 03F600000 mask 0FFE00000 uncachable
    2 base 03F800000 mask 0FF800000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009dc00 (usable)
    modified: 000000000009dc00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 00000000000e0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003f5d0000 (usable)
    modified: 000000003f5d0000 - 000000003f5e0000 (ACPI data)
    modified: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
    modified: 000000003f5e3000 - 0000000040000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7d40] f7d40
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 3f453000 - 3f5c0000
    Allocated new RAMDISK: 00100000 - 0026c574
    Move RAMDISK from 000000003f453000 - 000000003f5bf573 to 00100000 - 0026c573
    ACPI: RSDP 000f7ca0 00024 (v02 TOSCPL)
    ACPI: XSDT 3f5d7ae9 00074 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
    ACPI: FACP 3f5dfc60 000F4 (v03 TOSCPL TOSCPL00 06040000 PTL 00000002)
    ACPI: DSDT 3f5d8c7f 06F6D (v01 TOSCPL TOSCPL00 06040000 MSFT 03000000)
    ACPI: FACS 3f5e2fc0 00040
    ACPI: TCPA 3f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000)
    ACPI: HPET 3f5dfd86 00038 (v01 DELL M09 06040000 LOHR 0000005A)
    ACPI: MCFG 3f5dfdbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: SLIC 3f5dfdfa 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
    ACPI: APIC 3f5dff70 00068 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
    ACPI: BOOT 3f5dffd8 00028 (v01 TOSCPL TOSCPL00 06040000 LTP 00000001)
    ACPI: SSDT 3f5d80df 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 3f5d8039 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 3f5d7b5d 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    125MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0003f5d0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0003f5d0
    On node 0 totalpages: 259422
    free_area_init_node: node 0, pgdat c1402fc0, node_mem_map c1563020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3950 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 252 pages used for memmap
    HighMem zone: 31958 pages, LIFO batch:7
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2000000 s34388 r0 d22956 u2097152
    pcpu-alloc: s34388 r0 d22956 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257394
    Kernel command line: root=/dev/disk/by-uuid/0c38b0a8-2ce1-4b16-b902-3d9f0cc8b2cc resume=/dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 5190700 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (52 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 000155ad84] TEXT DATA BSS
    #3 [000155b000 - 0001561164] BRK
    #4 [00000f7d50 - 0000100000] BIOS reserved
    #5 [00000f7d40 - 00000f7d50] MP-table mpf
    #6 [000009dc00 - 000009e071] BIOS reserved
    #7 [000009e1c1 - 00000f7d40] BIOS reserved
    #8 [000009e071 - 000009e1c1] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 000026d000] NEW RAMDISK
    #13 [0001562000 - 0001563000] BOOTMEM
    #14 [0001563000 - 0001d53000] BOOTMEM
    #15 [000155adc0 - 000155adc4] BOOTMEM
    #16 [000155ae00 - 000155aec0] BOOTMEM
    #17 [000155aec0 - 000155af14] BOOTMEM
    #18 [0001d53000 - 0001d56000] BOOTMEM
    #19 [000155af40 - 000155af4c] BOOTMEM
    #20 [0001561180 - 0001561780] BOOTMEM
    #21 [000155af80 - 000155afa5] BOOTMEM
    #22 [000155afc0 - 000155afe7] BOOTMEM
    #23 [0001561780 - 0001561924] BOOTMEM
    #24 [0001561940 - 0001561980] BOOTMEM
    #25 [0001561980 - 00015619c0] BOOTMEM
    #26 [00015619c0 - 0001561a00] BOOTMEM
    #27 [0001561a00 - 0001561a40] BOOTMEM
    #28 [0001561a40 - 0001561a80] BOOTMEM
    #29 [0001561a80 - 0001561ac0] BOOTMEM
    #30 [0001561ac0 - 0001561b00] BOOTMEM
    #31 [0001561b00 - 0001561b40] BOOTMEM
    #32 [0001561b40 - 0001561b80] BOOTMEM
    #33 [0001561b80 - 0001561bc0] BOOTMEM
    #34 [0001561bc0 - 0001561c00] BOOTMEM
    #35 [0001561c00 - 0001561c40] BOOTMEM
    #36 [0001561c40 - 0001561c50] BOOTMEM
    #37 [0001561c80 - 0001561c90] BOOTMEM
    #38 [0001561cc0 - 0001561d3d] BOOTMEM
    #39 [0001561d40 - 0001561dbd] BOOTMEM
    #40 [0002000000 - 000200e000] BOOTMEM
    #41 [0002200000 - 000220e000] BOOTMEM
    #42 [0001561dc0 - 0001561dc4] BOOTMEM
    #43 [0001561e00 - 0001561e04] BOOTMEM
    #44 [0001561e40 - 0001561e48] BOOTMEM
    #45 [0001561e80 - 0001561e88] BOOTMEM
    #46 [0001561ec0 - 0001561f68] BOOTMEM
    #47 [0001561f80 - 0001561fe8] BOOTMEM
    #48 [0001d56000 - 0001d5a000] BOOTMEM
    #49 [0001d5a000 - 0001dda000] BOOTMEM
    #50 [0001dda000 - 0001e1a000] BOOTMEM
    #51 [000220e000 - 000270142c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0003f5d0)
    Memory: 1016576k/1038144k available (2930k kernel code, 21112k reserved, 1209k data, 408k init, 128840k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc140b000 - 0xc1471000 ( 408 kB)
    .data : 0xc12dc8fc - 0xc140adc0 (1209 kB)
    .text : 0xc1000000 - 0xc12dc8fc (2930 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1662.845 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3327.26 BogoMIPS (lpj=5542816)
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    Performance Events: Atom events, Intel PMU driver.
    ... version: 3
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20100121
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
    APIC calibration not consistent with PM-Timer: 299ms instead of 100ms
    APIC delta adjusted to PM-Timer: 1039171 (3117494)
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    CPU0: Thermal monitoring enabled (TM1)
    Brought up 2 CPUs
    Total of 2 processors activated (6653.18 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 3f5d89a8 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 3f5d833e 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 3f5d8bab 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 3f5d8923 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
    pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
    pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
    pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
    pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
    pci 0000:00:1b.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
    pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
    pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
    pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
    pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
    pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:07:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
    pci 0000:07:00.0: supports D1
    pci 0000:07:00.0: PME# supported from D0 D1 D3hot
    pci 0000:07:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:09:00.0: reg 10: [io 0x2000-0x20ff]
    pci 0000:09:00.0: reg 18: [mem 0xf050c000-0xf050cfff 64bit pref]
    pci 0000:09:00.0: reg 20: [mem 0xf0508000-0xf050bfff 64bit pref]
    pci 0000:09:00.0: supports D1 D2
    pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:00.0: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 09-09]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000003f5d0000 - 000000003fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 8 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0800-0x080f] has been reserved
    system 00:01: [io 0x1000-0x107f] has been reserved
    system 00:01: [io 0x1180-0x11bf] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:01: [io 0xfe00] has been reserved
    system 00:01: [io 0x164e-0x174c] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
    pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
    pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x409fffff]
    pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    pci 0000:00:1d.7: BAR 0: assigned [mem 0x40a00000-0x40a003ff]
    pci 0000:00:1d.7: BAR 0: set to [mem 0x40a00000-0x40a003ff] (PCI address [0x40a00000-0x40a003ff]
    pci 0000:00:1f.2: BAR 5: assigned [mem 0x40a00400-0x40a007ff]
    pci 0000:00:1f.2: BAR 5: set to [mem 0x40a00400-0x40a007ff] (PCI address [0x40a00400-0x40a007ff]
    pci 0000:00:1c.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
    pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 07-07]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
    pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 09-09]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0x40600000-0x409fffff]
    pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 11-11]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:1c.0: enabling device (0000 -> 0003)
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
    pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
    pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:05: resource 1 [mem 0x40000000-0x401fffff]
    pci_bus 0000:05: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
    pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:07: resource 1 [mem 0xf0100000-0xf01fffff]
    pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
    pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:09: resource 1 [mem 0x40600000-0x409fffff]
    pci_bus 0000:09: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
    pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
    pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1460k freed
    Simple Boot Flag at 0x35 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1285380584.433:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1736
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    pcieport 0000:00:1c.2: setting latency timer to 64
    pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
    pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
    pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
    pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
    ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f288), AE_ALREADY_EXISTS
    pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed
    pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Checking image partition /dev/disk/by-uuid/55dfc8bd-98b4-4f27-875c-e7b06c8b1c3e
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    udev: starting version 160
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00500 irq 27
    ata2: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00580 irq 27
    ata3: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00600 irq 27
    ata4: SATA max UDMA/133 abar m1024@0x40a00400 port 0x40a00680 irq 27
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda3): mounted filesystem with writeback data mode
    udev: starting version 160
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    Linux agpgart interface v0.103
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input3
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    ACPI: Power Button [PWRF]
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: using broken periodic workaround
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40a00000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ACPI: AC Adapter [ACAD] (off-line)
    usb 1-4: new high speed USB device using ehci_hcd and address 2
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    r8169 0000:09:00.0: setting latency timer to 64
    r8169 0000:09:00.0: (unregistered net_device): unknown MAC, using family default
    r8169 0000:09:00.0: irq 28 for MSI/MSI-X
    r8169 0000:09:00.0: eth0: RTL8101e at 0xf8664000, 88:ae:1d:46:3e:b2, XID 0c200000 IRQ 28
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    agpgart-intel 0000:00:00.0: detected 8188K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    ath9k 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    ath9k 0000:07:00.0: setting latency timer to 64
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    ACPI: Battery Slot [BAT1] (battery present)
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [drm] Initialized drm 1.1.0 20060810
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    usb 1-8: new high speed USB device using ehci_hcd and address 3
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [drm] set up 7M of stolen space
    phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    phy0: Atheros AR9285 Rev:2 mem=0xf8160000, irq=17
    fuse init (API version 7.13)
    [drm] initialized overlay support
    Initializing USB Mass Storage driver...
    scsi4 : usb-storage 1-4:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:c211)
    input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    [drm] Big FIFO is enabled
    Console: switching to colour frame buffer device 128x37
    fb0: inteldrmfb frame buffer device
    registered panic notifier
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    hda_codec: ALC259: BIOS auto-probing.
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    sd 4:0:0:0: Attached scsi generic sg1 type 0
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    EXT3-fs (sda3): using internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
    EXT3-fs (sda4): using internal journal
    EXT3-fs (sda4): mounted filesystem with writeback data mode
    Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    pacman.log: (the latest update + my attempt at iphone USB tethering)
    [2010-09-25 00:08] Running 'pacman -Syu'
    [2010-09-25 00:08] synchronizing package lists
    [2010-09-25 00:08] starting full system upgrade
    [2010-09-25 00:14] Running 'pacman -Syyu'
    [2010-09-25 00:14] synchronizing package lists
    [2010-09-25 00:14] upgraded pacman (3.4.0-2 -> 3.4.1-1)
    [2010-09-25 00:15] Running 'pacman -Syu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:15] starting full system upgrade
    [2010-09-25 00:15] Running 'pacman -Syu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:15] starting full system upgrade
    [2010-09-25 00:15] Running 'pacman -Syyu'
    [2010-09-25 00:15] synchronizing package lists
    [2010-09-25 00:16] starting full system upgrade
    [2010-09-25 00:16] Running 'pacman -Syyu'
    [2010-09-25 00:16] synchronizing package lists
    [2010-09-25 00:16] starting full system upgrade
    [2010-09-25 00:26] removed libelf (0.8.13-1)
    [2010-09-25 00:26] removed libv4l (0.6.4-1)
    [2010-09-25 00:26] installed goffice (0.8.9-1)
    [2010-09-25 00:26] upgraded abiword (2.8.6-1 -> 2.8.6-2)
    [2010-09-25 00:26] upgraded apvlv (0.0.9.7-1 -> 0.0.9.8-1)
    [2010-09-25 00:27] upgraded tzdata (2010j-1 -> 2010l-1)
    [2010-09-25 00:27] Generating locales...
    [2010-09-25 00:27] en_US.UTF-8... done
    [2010-09-25 00:27] en_US.ISO-8859-1... done
    [2010-09-25 00:27] Generation complete.
    [2010-09-25 00:27] upgraded glibc (2.12-4 -> 2.12.1-1)
    [2010-09-25 00:27] upgraded m4 (1.4.14-2 -> 1.4.15-1)
    [2010-09-25 00:27] upgraded autoconf (2.66-2 -> 2.67-1)
    [2010-09-25 00:27] upgraded glib2 (2.24.1-1 -> 2.24.2-1)
    [2010-09-25 00:27] installed iana-etc (2.30-1)
    [2010-09-25 00:27] warning: /etc/shadow installed as /etc/shadow.pacnew
    [2010-09-25 00:27] upgraded filesystem (2010.02-4 -> 2010.09-1)
    [2010-09-25 00:27] upgraded dbus-core (1.2.24-1 -> 1.4.0-1)
    [2010-09-25 00:27] upgraded xproto (7.0.17-1 -> 7.0.18-1)
    [2010-09-25 00:27] upgraded libxau (1.0.5-1 -> 1.0.6-1)
    [2010-09-25 00:27] upgraded libxcb (1.6-1 -> 1.7-1)
    [2010-09-25 00:27] upgraded kbproto (1.0.4-1 -> 1.0.5-1)
    [2010-09-25 00:27] upgraded libx11 (1.3.4-1 -> 1.3.5-1)
    [2010-09-25 00:27] upgraded dbus (1.2.24-1 -> 1.4.0-1)
    [2010-09-25 00:27] upgraded avahi (0.6.25-3 -> 0.6.27-2)
    [2010-09-25 00:27] upgraded lua (5.1.4-5 -> 5.1.4-6)
    [2010-09-25 00:27]
    [2010-09-25 00:27] ==> awesome installation notes:
    [2010-09-25 00:27] ----------------------------------------
    [2010-09-25 00:27] During some updates of awesome, the config file syntax changes heavily.
    [2010-09-25 00:27] This means that your configuration file (~/.config/awesome/rc.lua) for
    [2010-09-25 00:27] any other than this particular version of awesome may or may not work.
    [2010-09-25 00:27]
    [2010-09-25 00:27] upgraded awesome (3.4.5-2 -> 3.4.6-1)
    [2010-09-25 00:27] upgraded bzip2 (1.0.5-5 -> 1.0.6-1)
    [2010-09-25 00:27] upgraded cabextract (1.2-2 -> 1.3-1)
    [2010-09-25 00:27] upgraded ppl (0.10.2-3 -> 0.11-1)
    [2010-09-25 00:27] upgraded cloog-ppl (0.15.9-1 -> 0.15.9-2)
    [2010-09-25 00:27] upgraded consolekit (0.4.1-2 -> 0.4.1-4)
    [2010-09-25 00:27] The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
    [2010-09-25 00:27] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
    [2010-09-25 00:27] will be removed from @INC in a future release.
    [2010-09-25 00:27] The directory /usr/bin/perlbin/site will not be added to $PATH in a
    [2010-09-25 00:27] future release.
    [2010-09-25 00:27] upgraded perl (5.10.1-5 -> 5.12.1-2)
    [2010-09-25 00:27] upgraded openssl (1.0.0.a-2 -> 1.0.0.a-3)
    [2010-09-25 00:27] upgraded curl (7.21.0-1 -> 7.21.1-1)
    [2010-09-25 00:27] upgraded util-linux-ng (2.18-2 -> 2.18-3)
    [2010-09-25 00:27] upgraded module-init-tools (3.11.1-2 -> 3.12-1)
    [2010-09-25 00:27] upgraded udev (160-1 -> 162-1)
    [2010-09-25 00:27] upgraded device-mapper (2.02.70-1 -> 2.02.73-1)
    [2010-09-25 00:27] upgraded dhcpcd (5.2.5-1 -> 5.2.7-1)
    [2010-09-25 00:27] upgraded libldap (2.4.22-1 -> 2.4.23-1)
    [2010-09-25 00:27] upgraded libgpg-error (1.7-3 -> 1.9-2)
    [2010-09-25 00:27] upgraded libksba (1.0.7-1 -> 1.0.8-1)
    [2010-09-25 00:27] upgraded libassuan (2.0.0-1 -> 2.0.1-1)
    [2010-09-25 00:27] upgraded dirmngr (1.1.0rc1-1 -> 1.1.0-1)
    [2010-09-25 00:27] upgraded gcc-libs (4.5.0-6 -> 4.5.1-1)
    [2010-09-25 00:27] upgraded espeak (1.43.03-1 -> 1.44.05-1)
    [2010-09-25 00:27] upgraded feh (1.8-1 -> 1.9-1)
    [2010-09-25 00:27] upgraded x264 (20100722-1 -> 20100826-1)
    [2010-09-25 00:27] upgraded libvpx (0.9.1-1 -> 0.9.2-1)
    [2010-09-25 00:27] upgraded libdrm (2.4.21-1 -> 2.4.21-2)
    [2010-09-25 00:27] upgraded libva (0.31.0_p13-2 -> 1.0.4-1)
    [2010-09-25 00:27] upgraded ffmpeg (24460-1 -> 24953-1)
    [2010-09-25 00:27] upgraded nspr (4.8.4-1 -> 4.8.6-1)
    [2010-09-25 00:27] upgraded sqlite3 (3.6.23.1-1 -> 3.7.2-1)
    [2010-09-25 00:27] upgraded nss (3.12.6-3 -> 3.12.7-1)
    [2010-09-25 00:28] upgraded xulrunner (1.9.2.8-1 -> 1.9.2.10-1)
    [2010-09-25 00:28] upgraded firefox (3.6.8-1 -> 3.6.10-1)
    [2010-09-25 00:28] upgraded flashplugin (10.1.53.64-1 -> 10.1.85.3-1)
    [2010-09-25 00:28] installed elfutils (0.148-1)
    [2010-09-25 00:28] upgraded gcc (4.5.0-6 -> 4.5.1-1)
    [2010-09-25 00:28] ==> Unregistering cabalized packages...
    [2010-09-25 00:28] ==> Done.
    [2010-09-25 00:29] ==> All cabalized and yaourt-installed packages need to be reinstalled now.
    [2010-09-25 00:29] ==> See /usr/share/haskell/ and ghc-pkg list --user for a tentative list of affected packages.
    [2010-09-25 00:29] upgraded ghc (6.12.1-4 -> 6.12.3-1)
    [2010-09-25 00:29] upgraded git (1.7.2-1 -> 1.7.3-1)
    [2010-09-25 00:29] upgraded gnome-keyring (2.30.3-1 -> 2.30.3-2)
    [2010-09-25 00:29] upgraded pinentry (0.8.0-1 -> 0.8.0-2)
    [2010-09-25 00:29] upgraded gnupg2 (2.0.15-1 -> 2.0.16-2)
    [2010-09-25 00:29] upgraded grep (2.6.3-1 -> 2.7-1)
    [2010-09-25 00:29] upgraded gstreamer0.10 (0.10.29-1 -> 0.10.30-1)
    [2010-09-25 00:29] upgraded orc (0.4.6-1 -> 0.4.7-1)
    [2010-09-25 00:29] upgraded gstreamer0.10-base (0.10.29-1 -> 0.10.30-1)
    [2010-09-25 00:29] upgraded vim-runtime (7.2-1 -> 7.3.3-1)
    [2010-09-25 00:29] upgraded ruby (1.9.1_p429-1 -> 1.9.2_p0-3)
    [2010-09-25 00:29] Updating desktop and mime database...done.
    [2010-09-25 00:29] upgraded gvim (7.2-1 -> 7.3.3-1)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-mtl (1.1.0.2-3 -> 1.1.0.2-4)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-utf8-string (0.3.6-3 -> 0.3.6-4)
    [2010-09-25 00:29] Reading package info from stdin ... done.
    [2010-09-25 00:29] upgraded haskell-x11 (1.5.0.0-2 -> 1.5.0.0-5)
    [2010-09-25 00:29] upgraded libtool (2.2.10-1 -> 2.2.10-3)
    [2010-09-25 00:29] upgraded lcms (1.18-3 -> 1.19-1)
    [2010-09-25 00:29] upgraded imagemagick (6.6.2.10-1 -> 6.6.4.3-1)
    [2010-09-25 00:29] upgraded iproute2 (2.6.34-2 -> 2.6.35-3)
    [2010-09-25 00:29] upgraded iptables (1.4.8-1 -> 1.4.9-1)
    [2010-09-25 00:29] upgraded irssi (0.8.15-1 -> 0.8.15-3)
    [2010-09-25 00:29] upgraded jack (0.118.0-3 -> 0.118.0-4)
    [2010-09-25 00:29] upgraded libxi (1.3-2 -> 1.3.2-1)
    [2010-09-25 00:29] upgraded jasper (1.900.1-5 -> 1.900.1-6)
    [2010-09-25 00:29] upgraded linux-firmware (20100623-2 -> 20100807-1)
    [2010-09-25 00:30] >>> Updating module dependencies. Please wait ...
    [2010-09-25 00:30] >>> MKINITCPIO SETUP
    [2010-09-25 00:30] >>> ----------------
    [2010-09-25 00:30] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-09-25 00:30] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-09-25 00:30] >>> More information about mkinitcpio setup can be found here:
    [2010-09-25 00:30] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-09-25 00:30]
    [2010-09-25 00:30] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-09-25 00:30] ==> Building image "default"
    [2010-09-25 00:30] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-09-25 00:30] :: Begin build
    [2010-09-25 00:30] :: Parsing hook [base]
    [2010-09-25 00:30] :: Parsing hook [udev]
    [2010-09-25 00:30] :: Parsing hook [autodetect]
    [2010-09-25 00:30] :: Parsing hook [pata]
    [2010-09-25 00:30] :: Parsing hook [scsi]
    [2010-09-25 00:30] :: Parsing hook [sata]
    [2010-09-25 00:30] :: Parsing hook [filesystems]
    [2010-09-25 00:30] :: Generating module dependencies
    [2010-09-25 00:30] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-09-25 00:30] ==> SUCCESS
    [2010-09-25 00:30] ==> Building image "fallback"
    [2010-09-25 00:30] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-09-25 00:30] :: Begin build
    [2010-09-25 00:30] :: Parsing hook [base]
    [2010-09-25 00:31] :: Parsing hook [udev]
    [2010-09-25 00:31] :: Parsing hook [pata]
    [2010-09-25 00:31] :: Parsing hook [scsi]
    [2010-09-25 00:33] :: Parsing hook [sata]
    [2010-09-25 00:34] :: Parsing hook [filesystems]
    [2010-09-25 00:35] :: Generating module dependencies
    [2010-09-25 00:35] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-09-25 00:35] ==> SUCCESS
    [2010-09-25 00:35] upgraded kernel26 (2.6.34.1-1 -> 2.6.35.5-1)
    [2010-09-25 00:35] upgraded kernel26-headers (2.6.34.1-1 -> 2.6.35.5-1)
    [2010-09-25 00:35] upgraded lftp (4.0.9-1 -> 4.0.10-1)
    [2010-09-25 00:35] upgraded libass (0.9.9-1 -> 0.9.11-1)
    [2010-09-25 00:35] upgraded libcdaudio (0.99.12-4 -> 0.99.12-5)
    [2010-09-25 00:35] upgraded libcups (1.4.4-1 -> 1.4.4-3)
    [2010-09-25 00:35] upgraded libdatrie (0.2.3-1 -> 0.2.4-1)
    [2010-09-25 00:35] upgraded libfetch (2.32-1 -> 2.33-1)
    [2010-09-25 00:35] upgraded libgnome-keyring (2.30.1-1 -> 2.30.1-2)
    [2010-09-25 00:35] upgraded libid3tag (0.15.1b-5 -> 0.15.1b-6)
    [2010-09-25 00:35] upgraded libpciaccess (0.11.0-1 -> 0.12.0-1)
    [2010-09-25 00:35] upgraded libproxy (0.3.1-1 -> 0.4.6-1)
    [2010-09-25 00:35] installed v4l-utils (0.8.1-1)
    [2010-09-25 00:35] upgraded libxvmc (1.0.5-1 -> 1.0.6-1)
    [2010-09-25 00:35] upgraded lirc-utils (0.8.6-3 -> 0.8.6-4)
    [2010-09-25 00:35] upgraded lvm2 (2.02.70-1 -> 2.02.73-1)
    [2010-09-25 00:35] upgraded man-pages (3.25-1 -> 3.26-1)
    [2010-09-25 00:35] upgraded mathomatic (15.1.5-1 -> 15.2.1-1)
    [2010-09-25 00:35] upgraded mdadm (3.1.2-2 -> 3.1.4-1)
    [2010-09-25 00:35] upgraded mkinitcpio-busybox (1.16.2-1 -> 1.17.2-1)
    [2010-09-25 00:35] upgraded modemmanager (0.3-2 -> 0.4-1)
    [2010-09-25 00:35] upgraded mpfr (3.0.0-1 -> 3.0.0-2)
    [2010-09-25 00:35] upgraded smbclient (3.5.4-1 -> 3.5.5-1)
    [2010-09-25 00:35] upgraded mplayer (31774-1 -> 32227-1)
    [2010-09-25 00:35] upgraded murrine-themes-collection (20100201-1 -> 20100910-1)
    [2010-09-25 00:35] upgraded nano (2.2.4-1 -> 2.2.5-1)
    [2010-09-25 00:35] upgraded ncmpcpp (0.5.4-1 -> 0.5.5-1)
    [2010-09-25 00:35] upgraded networkmanager (0.8-1 -> 0.8.1-1)
    [2010-09-25 00:35] upgraded network-manager-applet (0.8-3 -> 0.8.1-1)
    [2010-09-25 00:35] upgraded tcp_wrappers (7.6-11 -> 7.6-12)
    [2010-09-25 00:35] upgraded openssh (5.5p1-1 -> 5.6p1-1)
    [2010-09-25 00:35] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2010-09-25 00:35] upgraded pacman-mirrorlist (20100621-1 -> 20100825-1)
    [2010-09-25 00:35] upgraded perl-list-moreutils (0.22-2 -> 0.22-4)
    [2010-09-25 00:35] upgraded pixman (0.18.2-1 -> 0.18.4-1)
    [2010-09-25 00:35] upgraded poppler-data (0.4.2-1 -> 0.4.3-1)
    [2010-09-25 00:35] upgraded psmisc (22.11-1 -> 22.13-1)
    [2010-09-25 00:35] upgraded pycairo (1.8.8-1 -> 1.8.10-1)
    [2010-09-25 00:36] upgraded pygtk (2.17.0-1 -> 2.17.0-2)
    [2010-09-25 00:36] upgraded renderproto (0.11-1 -> 0.11.1-1)
    [2010-09-25 00:36] upgraded rpcbind (0.2.0-1 -> 0.2.0-2)
    [2010-09-25 00:36] upgraded rxvt-unicode-256color (9.07-8 -> 9.07-9)
    [2010-09-25 00:36] warning: /etc/slim.conf installed as /etc/slim.conf.pacnew
    [2010-09-25 00:36] upgraded slim (1.3.1-7 -> 1.3.2-1)
    [2010-09-25 00:36] warning: /etc/sudoers installed as /etc/sudoers.pacnew
    [2010-09-25 00:36] upgraded sudo (1.7.3-1 -> 1.7.4.p4-1)
    [2010-09-25 00:36] upgraded synergy (1.3.1-7 -> 1.3.4-2)
    [2010-09-25 00:36] upgraded syslog-ng (3.1.1-1 -> 3.1.2-1)
    [2010-09-25 00:36] upgraded sysvinit (2.86-5 -> 2.88-1)
    [2010-09-25 00:36] upgraded upower (0.9.4-1 -> 0.9.5-1)
    [2010-09-25 00:36] upgraded usbutils (0.87-1 -> 0.90-1)
    [2010-09-25 00:36] upgraded videoproto (2.3.0-1 -> 2.3.1-1)
    [2010-09-25 00:36] upgraded vim-colorsamplerpack (8.03-1 -> 8.03-2)
    [2010-09-25 00:36] upgraded vlc (1.1.1-3 -> 1.1.4-2)
    [2010-09-25 00:36] upgraded wine (1.2-1 -> 1.3.3-1)
    [2010-09-25 00:36] upgraded xextproto (7.1.1-1 -> 7.1.2-1)
    [2010-09-25 00:36] upgraded xf86-input-evdev (2.4.0-1 -> 2.4.0-2)
    [2010-09-25 00:36] upgraded xfce-utils (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfconf (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfdesktop (4.6.2-1 -> 4.6.2-2)
    [2010-09-25 00:36] upgraded xfsprogs (3.1.2-1 -> 3.1.3-1)
    [2010-09-25 00:36] Reading package info from stdin ... done.
    [2010-09-25 00:36] upgraded xmonad (0.9.1-4 -> 0.9.1-8)
    [2010-09-25 00:36] upgraded xorg-server-utils (7.5-4 -> 7.5-6)
    [2010-09-25 00:36] upgraded xorg-utils (7.6-2 -> 7.6-3)
    [2010-09-25 00:36] upgraded xterm (259-1 -> 261-1)
    [2010-09-25 00:36] upgraded xz (4.999.9beta-5 -> 4.999.9beta_174_g41bc-1)
    [2010-09-25 00:36] upgraded youtube-dl (2010.07.14-1 -> 2010.08.04-1)
    [2010-09-25 00:41] Running 'pacman -S xcompmgr'
    [2010-09-25 00:41] installed xcompmgr (1.1.5-1)
    [2010-09-27 23:25] Running 'pacman -S libimobiledevice'
    [2010-09-27 23:25] installed libplist (1.3-1)
    [2010-09-27 23:25] installed usbmuxd (1.0.4-2)
    [2010-09-27 23:25] installed libimobiledevice (1.0.2-1)
    [2010-09-27 23:27] Running 'pacman -U /home/brandon/downloads/ipheth-utils/ipheth-utils-1.0-1-i686.pkg.tar.xz'
    [2010-09-27 23:27] >>> Reloading udev rules
    [2010-09-27 23:27] >>> You can load the iPhone Ethernet Driver now - ipheth
    [2010-09-27 23:27] installed ipheth-utils (1.0-1)
    Last edited by bas1 (2010-09-30 01:48:43)

    karol wrote:
    bas1 wrote:I guess the thing to do would be to try to re-generate the initrd via chroot, but I have no idea how to do this.
    http://wiki.archlinux.org/index.php/Chroot
    You may try to add or remove some hooks as this mysteriously helped some folks.
    Good luck.
    Well, chrooting and regenerating the initial ramdisk has fixed it! Thanks for the help!!
    Edit:  and just FYI, I didn't change any hooks in /etc/mkinitcpio.conf when I re-generated.  But yeah, if someone else has this issue, try playing with them.
    Last edited by bas1 (2010-09-30 01:59:47)

  • [SOLVED] Unable to determine major/minor number of root device - USB

    I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
    Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
    :: Running Hook [udev]
    :: Triggering uevents...done.
    ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
    for device /dev/disk/by-uuid/[the uuid] ...
    /dev/disk/by-uuid/(the uuid)'.
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    sh: can't access tty: job control turned off
    [ramfs /]#
    So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
    # mkinitcpio -p linux
    So I plugged it back into the laptop, booted it, and got the same error.
    Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
    I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
    Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
    # sudo fdisk -l /dev/sdg
    Disk /dev/sdg: 500.1 GB, 500107861504 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00016b3d
    Device Boot Start End Blocks Id System
    /dev/sdg1 * 63 208844 104391 83 Linux
    /dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
    /dev/sdg3 4417875 209230559 102406342+ 83 Linux
    /dev/sdg4 209230560 976768064 383768752+ 83 Linux
    Screengrab of my VirtualBox storage setup (just for giggles):
    My /etc/mkinitcpio.conf:
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    # Tried this line instead -- didn't work either
    #HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
    HOOKS="base udev usb sata filesystems"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    My GRUB menu.lst:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    Last edited by UncleNinja (2011-12-02 15:33:21)

    UncleNinja wrote:
    skunktrader wrote:https://bugs.archlinux.org/task/27385
    Perfect! Thank you!
    Would it be safe to copy over the version from HEAD into my mkinitcpio?
    EDIT: nevermind, derp derp the package is updated
    EDIT again: Actually, it's not.
    I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
    Thanks guys!
    Last edited by UncleNinja (2011-12-02 15:35:20)

  • Kernel Build: kernel panic: VFS barf: Request for Assistance

    Good Morning,
    Been using Arch for about a year now. No issues. Love it.
    I am rebuilding a kernel, to my specs, soley for an educational experience. Stock Arch works peechee, but I need to learn more about linux's internals. 
    Read the wiki, browsed this board, tried several remedies. No Luck.
    I'm missing someting. In my new kernel:
    BTW: The kernel sources I'm using is 2.6.11.7, downloaded from "kernel.org". I've sucessfully rebuilt kernels for SuSE, RH, Mandrake, and Fedora (RH derived). To my knowledge, none of these former distros are using UDev.
    VFS: doesn't like the UDev naming convention. Then the kernel panics because it can't mount anything.
    I've tried rebuilding the kernel with /devfs turned on and off, and also with /dev/pts on and off.. No change in behavior.
    I've passed grub's menu.lst the conventional "root=/dev/sdb3"  and it gets farther, then tells me I've got a corrupted superblock. Read one post here where  an individual allwed fschk to do it's magic, and hosed his system, so I did NOT go there. Rebooting the stock Arch kernel brings everything back to life normally.
    It appears that my kernel isn't using UDev, thus the new naming convention of my root disk, which is "root=/dev/discs/disc1/part3"
    I know my eyes are fading with age, but I'll be damned if I can find an entry anywhere in "make xconfig" that talks about UDev.
    I know that I could modify my init scripts to use the older /dev naming conventions and move on, but I don't want to fork my own system from Arch.
    I've included my grub menu.lst file, and my .config file.
    I'm prettu sure UDev is biting me, and in my ignorance I don;t know how to remedy it.
    Any assistance would be sincerely appreciated.
    Dave
    #// Begin menu.lst
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    #  Old /dev    DevFS                    Grub
    #  /dev/fd0    /dev/floppy/0            (fd0)
    #  /dev/hda    /dev/discs/disc0/disc    (hd0)
    #  /dev/hdb2   /dev/discs/disc1/part2   (hd1,1)
    #  /dev/hda3   /dev/discs/disc0/part3   (hd0,2)
    #  FRAMEBUFFER RESOLUTION SETTINGS
    #     +----------------------------------------+
    #          | 640x480 800x600 1024x768 1280x1024
    #      ----+-----------------------------------
    #      256 |   0x301   0x303    0x305     0x307
    #      32K |   0x310   0x313    0x316     0x319
    #      64K |   0x311   0x314    0x317     0x31A
    #      16M |   0x312   0x315    0x318     0x31B
    #     +----------------------------------------+
    # general configuration:
    timeout   300
    default   0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # TIP: To use udev, add "devfs=nomount" to your kernel line.
    # Daves Custom Kernel
    title  Daves Arch Linux
    root   (hd1,2)
    kernel (hd1,0)/bzImageDave root=/dev/discs/disc1/part3 ro vga=0x318 idebus=66 apm=off elevator=cfq
    # Arch Linux
    title  Arch Linux
    root   (hd1,2)
    kernel (hd1,0)/vmlinuz26 root=/dev/discs/disc1/part3 ro vga=0x318 idebus=66 apm=off elevator=cfq
    # Winsucks XP Pro
    title Windows XP Pro
    rootnoverify (hd0,0)
    chainloader +1
    #MemTest 86 Diagnostic
    title Memtest 86+
    kernel (hd1,0)/memtest86+/memtest.bin
    #// end of menu.lst
    #// Begin of .config
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.11.7
    # Sun Apr 17 09:34:24 2005
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    # Code maturity level options
    CONFIG_EXPERIMENTAL=y
    # CONFIG_CLEAN_COMPILE is not set
    CONFIG_BROKEN=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y
    # General setup
    CONFIG_LOCALVERSION="-Dave"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_LOG_BUF_SHIFT=15
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SHMEM=y
    CONFIG_CC_ALIGN_FUNCTIONS=0
    CONFIG_CC_ALIGN_LABELS=0
    CONFIG_CC_ALIGN_LOOPS=0
    CONFIG_CC_ALIGN_JUMPS=0
    # CONFIG_TINY_SHMEM is not set
    # Loadable module support
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    CONFIG_MODULE_SRCVERSION_ALL=y
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    # Processor type and features
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_HPET_TIMER=y
    # CONFIG_HPET_EMULATE_RTC is not set
    CONFIG_SMP=y
    CONFIG_NR_CPUS=4
    CONFIG_SCHED_SMT=y
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    CONFIG_X86_MCE_P4THERMAL=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set
    # Firmware Drivers
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_IRQBALANCE=y
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set
    # Power management options (ACPI, APM)
    CONFIG_PM=y
    # CONFIG_PM_DEBUG is not set
    # CONFIG_SOFTWARE_SUSPEND is not set
    # ACPI (Advanced Configuration and Power Interface) Support
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    # CONFIG_ACPI_SLEEP is not set
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    # CONFIG_ACPI_CONTAINER is not set
    # APM (Advanced Power Management) BIOS Support
    # CONFIG_APM is not set
    # CPU Frequency scaling
    # CONFIG_CPU_FREQ is not set
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCIEPORTBUS is not set
    # CONFIG_PCI_MSI is not set
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    # CONFIG_ISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    # PCCARD (PCMCIA/CardBus) support
    # CONFIG_PCCARD is not set
    # PC-card bridges
    # PCI Hotplug Support
    # CONFIG_HOTPLUG_PCI is not set
    # Executable file formats
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y
    # Device Drivers
    # Generic Driver Options
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # Memory Technology Devices (MTD)
    # CONFIG_MTD is not set
    # Parallel port support
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    # CONFIG_PARPORT_SERIAL is not set
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y
    # Plug and Play support
    # CONFIG_PNP is not set
    # Block devices
    CONFIG_BLK_DEV_FD=y
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    CONFIG_BLK_DEV_CRYPTOLOOP=y
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_LBD is not set
    CONFIG_CDROM_PKTCDVD=y
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_ATA_OVER_ETH is not set
    # ATA/ATAPI/MFM/RLL support
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y
    # Please see Documentation/ide.txt for help/info on IDE drives
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    CONFIG_BLK_DEV_IDEFLOPPY=y
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    # IDE chipset support/bugfixes
    CONFIG_IDE_GENERIC=y
    # CONFIG_BLK_DEV_CMD640 is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set
    # SCSI device support
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    # CONFIG_BLK_DEV_SR is not set
    # CONFIG_CHR_DEV_SG is not set
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # SCSI Transport Attributes
    CONFIG_SCSI_SPI_ATTRS=y
    CONFIG_SCSI_FC_ATTRS=y
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # SCSI low-level drivers
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    CONFIG_SCSI_AIC7XXX=y
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
    CONFIG_AIC7XXX_DEBUG_MASK=0
    # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_CPQFCTS is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PCI2000 is not set
    # CONFIG_SCSI_PCI2220I is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=y
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set
    # Multi-device support (RAID and LVM)
    # CONFIG_MD is not set
    # Fusion MPT device support
    # CONFIG_FUSION is not set
    # IEEE 1394 (FireWire) support
    # CONFIG_IEEE1394 is not set
    # I2O device support
    # CONFIG_I2O is not set
    # Networking support
    CONFIG_NET=y
    # Networking options
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    CONFIG_NET_KEY=y
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    CONFIG_INET_AH=y
    CONFIG_INET_ESP=y
    CONFIG_INET_IPCOMP=y
    CONFIG_INET_TUNNEL=y
    CONFIG_IP_TCPDIAG=y
    # CONFIG_IP_TCPDIAG_IPV6 is not set
    # CONFIG_IPV6 is not set
    # CONFIG_NETFILTER is not set
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=y
    # SCTP Configuration (EXPERIMENTAL)
    # CONFIG_IP_SCTP is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # QoS and/or fair queueing
    # CONFIG_NET_SCHED is not set
    # CONFIG_NET_CLS_ROUTE is not set
    # Network testing
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=y
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # ARCnet devices
    # CONFIG_ARCNET is not set
    # Ethernet (10 or 100Mbit)
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # Tulip family network device support
    # CONFIG_NET_TULIP is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_DGRS is not set
    CONFIG_EEPRO100=y
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # Ethernet (1000 Mbit)
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # Ethernet (10000 Mbit)
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set
    # Token Ring devices
    # CONFIG_TR is not set
    # Wireless LAN (non-hamradio)
    # CONFIG_NET_RADIO is not set
    # Wan interfaces
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # ISDN subsystem
    # CONFIG_ISDN is not set
    # Telephony Support
    # CONFIG_PHONE is not set
    # Input device support
    CONFIG_INPUT=y
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=y
    # CONFIG_INPUT_TSDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set
    # Input I/O drivers
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_IFORCE=y
    CONFIG_JOYSTICK_IFORCE_USB=y
    # CONFIG_JOYSTICK_IFORCE_232 is not set
    # CONFIG_JOYSTICK_WARRIOR is not set
    # CONFIG_JOYSTICK_MAGELLAN is not set
    # CONFIG_JOYSTICK_SPACEORB is not set
    # CONFIG_JOYSTICK_SPACEBALL is not set
    # CONFIG_JOYSTICK_STINGER is not set
    # CONFIG_JOYSTICK_TWIDDLER is not set
    # CONFIG_JOYSTICK_DB9 is not set
    # CONFIG_JOYSTICK_GAMECON is not set
    # CONFIG_JOYSTICK_TURBOGRAFX is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=y
    CONFIG_INPUT_UINPUT=y
    # Character devices
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set
    # Serial drivers
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    # Non-8250 serial port support
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=y
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set
    # IPMI
    # CONFIG_IPMI_HANDLER is not set
    # Watchdog Cards
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=y
    CONFIG_NVRAM=y
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set
    # Ftape, the floppy tape device driver
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    CONFIG_AGP_INTEL=y
    # CONFIG_AGP_INTEL_MCH is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_GAMMA is not set
    # CONFIG_DRM_R128 is not set
    # CONFIG_DRM_RADEON is not set
    # CONFIG_DRM_I810 is not set
    # CONFIG_DRM_I830 is not set
    # CONFIG_DRM_I915 is not set
    CONFIG_DRM_MGA=y
    # CONFIG_DRM_SIS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set
    # I2C support
    CONFIG_I2C=y
    CONFIG_I2C_CHARDEV=y
    # I2C Algorithms
    CONFIG_I2C_ALGOBIT=y
    CONFIG_I2C_ALGOPCF=y
    CONFIG_I2C_ALGOPCA=y
    # I2C Hardware Bus support
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    CONFIG_I2C_I801=y
    # CONFIG_I2C_I810 is not set
    # CONFIG_I2C_ISA is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_PARPORT is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    CONFIG_I2C_PIIX4=y
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set
    # CONFIG_I2C_PCA_ISA is not set
    # Hardware Sensors Chip support
    CONFIG_I2C_SENSOR=y
    CONFIG_SENSORS_ADM1021=y
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1026 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_LM63 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM87 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set
    # Other I2C Chip support
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_RTC8564 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set
    # Dallas's 1-wire bus
    # CONFIG_W1 is not set
    # Misc devices
    # CONFIG_IBM_ASM is not set
    # Multimedia devices
    # CONFIG_VIDEO_DEV is not set
    # Digital Video Broadcasting Devices
    # CONFIG_DVB is not set
    # Graphics support
    CONFIG_FB=y
    # CONFIG_FB_MODE_HELPERS is not set
    # CONFIG_FB_TILEBLITTING is not set
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    CONFIG_FB_VESA=y
    CONFIG_VIDEO_SELECT=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_I810 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON_OLD is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_VIRTUAL is not set
    # Console display driver support
    CONFIG_VGA_CONSOLE=y
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    CONFIG_FONTS=y
    # CONFIG_FONT_8x8 is not set
    CONFIG_FONT_8x16=y
    # CONFIG_FONT_6x11 is not set
    # CONFIG_FONT_PEARL_8x8 is not set
    # CONFIG_FONT_ACORN_8x8 is not set
    # CONFIG_FONT_MINI_4x6 is not set
    # CONFIG_FONT_SUN8x16 is not set
    # CONFIG_FONT_SUN12x22 is not set
    # Logo configuration
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
    # Sound
    CONFIG_SOUND=y
    # Advanced Linux Sound Architecture
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_SEQUENCER=y
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_SEQUENCER_OSS=y
    # CONFIG_SND_RTCTIMER is not set
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set
    # Generic devices
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set
    # PCI devices
    CONFIG_SND_AC97_CODEC=y
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=y
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # USB devices
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set
    # Open Sound System
    # CONFIG_SOUND_PRIME is not set
    # USB support
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set
    # Miscellaneous USB options
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_OTG is not set
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    # USB Host Controller Drivers
    CONFIG_USB_EHCI_HCD=y
    CONFIG_USB_EHCI_SPLIT_ISO=y
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    CONFIG_USB_OHCI_HCD=y
    CONFIG_USB_UHCI_HCD=y
    # CONFIG_USB_SL811_HCD is not set
    # USB Device Class drivers
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_ACM is not set
    # CONFIG_USB_PRINTER is not set
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
    # CONFIG_USB_STORAGE is not set
    # USB Input Devices
    CONFIG_USB_HID=y
    CONFIG_USB_HIDINPUT=y
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_MTOUCH is not set
    # CONFIG_USB_EGALAX is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set
    # USB Imaging devices
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set
    # USB Multimedia devices
    # CONFIG_USB_DABUSB is not set
    # Video4Linux support is needed for USB Multimedia device support
    # USB Network Adapters
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set
    # USB port drivers
    # CONFIG_USB_USS720 is not set
    # USB Serial Converter support
    # CONFIG_USB_SERIAL is not set
    # USB Miscellaneous drivers
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGETKIT is not set
    # CONFIG_USB_PHIDGETSERVO is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_TEST is not set
    # USB ATM/DSL drivers
    # USB Gadget Support
    # CONFIG_USB_GADGET is not set
    # MMC/SD Card support
    # CONFIG_MMC is not set
    # InfiniBand support
    # CONFIG_INFINIBAND is not set
    # File systems
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # XFS support
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set
    # CD-ROM/DVD Filesystems
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=y
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y
    # DOS/FAT/NT Filesystems
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=y
    # CONFIG_NTFS_DEBUG is not set
    # CONFIG_NTFS_RW is not set
    # Pseudo filesystems
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_XATTR is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # Miscellaneous filesystems
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    # Network File Systems
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    CONFIG_NFS_V4=y
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V4=y
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    CONFIG_SUNRPC_GSS=y
    CONFIG_RPCSEC_GSS_KRB5=y
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    CONFIG_SMB_FS=y
    # CONFIG_SMB_NLS_DEFAULT is not set
    CONFIG_CIFS=y
    # CONFIG_CIFS_STATS is not set
    # CONFIG_CIFS_XATTR is not set
    # CONFIG_CIFS_EXPERIMENTAL is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # Partition Types
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MINIX_SUBPARTITION is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set
    # Native Language Support
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ASCII=y
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=y
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set
    # Profiling support
    # CONFIG_PROFILING is not set
    # Kernel hacking
    # CONFIG_DEBUG_KERNEL is not set
    # CONFIG_DEBUG_PREEMPT is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_FRAME_POINTER is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_4KSTACKS is not set
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    # Security options
    # CONFIG_KEYS is not set
    CONFIG_SECURITY=y
    # CONFIG_SECURITY_NETWORK is not set
    CONFIG_SECURITY_CAPABILITIES=y
    CONFIG_SECURITY_ROOTPLUG=y
    CONFIG_SECURITY_SECLVL=y
    # CONFIG_SECURITY_SELINUX is not set
    # Cryptographic options
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=y
    CONFIG_CRYPTO_MD4=y
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=y
    CONFIG_CRYPTO_SHA256=y
    CONFIG_CRYPTO_SHA512=y
    CONFIG_CRYPTO_WP512=y
    CONFIG_CRYPTO_DES=y
    CONFIG_CRYPTO_BLOWFISH=y
    CONFIG_CRYPTO_TWOFISH=y
    CONFIG_CRYPTO_SERPENT=y
    CONFIG_CRYPTO_AES_586=y
    CONFIG_CRYPTO_CAST5=y
    CONFIG_CRYPTO_CAST6=y
    CONFIG_CRYPTO_TEA=y
    CONFIG_CRYPTO_ARC4=y
    CONFIG_CRYPTO_KHAZAD=y
    CONFIG_CRYPTO_ANUBIS=y
    CONFIG_CRYPTO_DEFLATE=y
    CONFIG_CRYPTO_MICHAEL_MIC=y
    CONFIG_CRYPTO_CRC32C=y
    CONFIG_CRYPTO_TEST=y
    # Hardware crypto devices
    # CONFIG_CRYPTO_DEV_PADLOCK is not set
    # Library routines
    # CONFIG_CRC_CCITT is not set
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_PC=y
    #// end of .config
    [/code]

    dcbdbis wrote:what makes the stock Arch kernel look at: "/dev/discs/disc1/part3" rather than "/dev/sdb3"?
    Devfs. Because it insist on using its own non-standard naming format. So if you disable devfs, then the kernel knows only the standard names like /dev/sda.
    Fstab is a configuration file, you're supposed to edit it to suite your needs. Forking Arch isn't that easy. ;-)
    Look at pacman.conf's NoUpgrade option. If you have a config file you changed manually and want to keep then add it to NoUpgrade. By default Pacman will move your file out of the way to file.pacsave and put the new config in place. By telling Pacman to prefer the old file you'll save some work. Fstab is already in NoUpgrade in the default pacman.conf, which should say enough.

  • Fglrx + acpi = hard problems

    Hello to all, I installed one year ago chakra linux distrbution and all works fine but some things doesn't like to me, so I installed Slackware, but I don't have much time to spent compiling programs.... and compiling... so, I come back with arch + kde. The problem is the ATI video card, I have one 4870x2 PCI-e 16x 2gb gddr5 (chipset r700) and in the last installation I don't remember problems with the propietary driver. But this time the driver doesn't work.
    My hardware is: motherboard gigabyte ga-ma970fxt-ud5p, phenom 2 945 black edition am3, 8gb ddr3 @1600mhz ocz reaper, hdd WD velociraptor 300gb, video card described before.
    I made a fresh install last Monday and every works fine, but I want to install the ATI video propietary drivers and...
    In the first step, I read five or six times this page https://wiki.archlinux.org/index.php/ATI_Catalyst and I followed the procedure according to the section called "Installing from AUR" and I made:
    su root
    pacman -Sy base-devel
    su faktorqm
    cd /home/faktorqm
    wget http://aur.archlinux.org/packages/ca/ca … ils.tar.gz
    wget https://aur.archlinux.org/packages/ca/c … mon.tar.gz
    tar -zxvf catalyst-utils.tar.gz
    tar -zxvf catalyst-daemon.tar.gz
    cd catalyst-utils/
    makepkg -s PKGBUILD
    su root
    pacman -U catalyst-utils-11.12-1-x86_64.pkg.tar.xz
    su faktorqm
    mv ati-driver-installer-11-12-x86.x86_64.run ../catalyst-daemon/
    cd ..
    cd catalyst-daemon/
    makepkg -s PKGBUILD
    su root
    pacman -U catalyst-daemon-11.12-1-x86_64.pkg.tar.xz
    su faktorqm
    cd ..
    No errors in this procedure.
    note 0: my user is called "faktorqm"
    note 1:
    [faktorqm@the_missile /]$ uname -a
    Linux the_missile 3.2.1-2-ARCH #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012 x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux
    [faktorqm@the_missile /]$
    note 2:
    [faktorqm@the_missile /]$ cat /etc/mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES="fglrx"
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata filesystems usbinput"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    [faktorqm@the_missile /]$
    note 4:
    [faktorqm@the_missile /]$ cat /boot/grub/menu.lst
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # [url]https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution[/url]
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd2,1)
    kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
    initrd /boot/initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd2,1)
    kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
    initrd /boot/initramfs-linux-fallback.img
    # (2) Windows
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    [faktorqm@the_missile /]$
    note 5:
    cat /var/log/boot (output stripped)
    Thu Jan 26 21:45:02 2012: :: Checking fglrx [BUSY] ^[[u: Loading fglrx [FAIL][
    note 6:
    [faktorqm@the_missile /]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.1-2-ARCH (nobody@skynet) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012
    [ 0.000000] Command line: root=/dev/sda2 ro nomodeset acpi=off
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfde0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bfde0000 - 00000000bfee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790FXT-UD5P/GA-MA790FXT-UD5P, BIOS F8n 01/07/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back
    [ 0.000000] 4 base 000200000000 mask FFFFC0000000 write-back
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000240000000 aka 9216M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xbfde0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f4760] f4760
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfde0000
    [ 0.000000] 0000000000 - 0080000000 page 1G
    [ 0.000000] 0080000000 - 00bfc00000 page 2M
    [ 0.000000] 00bfc00000 - 00bfde0000 page 4k
    [ 0.000000] kernel direct mapping tables up to bfde0000 @ 1fffd000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
    [ 0.000000] 0100000000 - 0240000000 page 1G
    [ 0.000000] kernel direct mapping tables up to 240000000 @ bfddf000-bfde0000
    [ 0.000000] RAMDISK: 37c7b000 - 37ff0000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000240000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
    [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00240000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bfde0
    [ 0.000000] 0: 0x00100000 -> 0x00240000
    [ 0.000000] On node 0 totalpages: 2096495
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 765472 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20480 pages used for memmap
    [ 0.000000] Normal zone: 1290240 pages, LIFO batch:31
    [ 0.000000] SFI: Simple Firmware Interface v0.81 [url]http://simplefirmware.org[/url]
    [ 0.000000] Intel MultiProcessor Specification v1.4
    [ 0.000000] MPTABLE: OEM ID: OEM00000
    [ 0.000000] MPTABLE: Product ID: PROD00000000
    [ 0.000000] MPTABLE: APIC at: 0xFEE00000
    [ 0.000000] Processor #0 (Bootup-CPU)
    [ 0.000000] Processor #1
    [ 0.000000] Processor #2
    [ 0.000000] Processor #3
    [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] Processors: 4
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000bfde0000 - 00000000bfee0000
    [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
    [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82048 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059626
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda2 ro nomodeset acpi=off
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ 590a000000 size 32 MB
    [ 0.000000] Aperture beyond 4GB. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    [ 0.000000] Memory: 8108168k/9437184k available (4279k kernel code, 1051204k absent, 277812k reserved, 4601k data, 728k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3222.584 MHz processor.
    [ 0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 6447.71 BogoMIPS (lpj=10741946)
    [ 0.006672] pid_max: default: 32768 minimum: 301
    [ 0.006690] Security Framework initialized
    [ 0.006693] AppArmor: AppArmor disabled by boot time parameter
    [ 0.007218] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.010432] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.011639] Mount-cache hash table entries: 256
    [ 0.011739] Initializing cgroup subsys cpuacct
    [ 0.011744] Initializing cgroup subsys memory
    [ 0.011751] Initializing cgroup subsys devices
    [ 0.011752] Initializing cgroup subsys freezer
    [ 0.011754] Initializing cgroup subsys net_cls
    [ 0.011755] Initializing cgroup subsys blkio
    [ 0.011776] tseg: 00bff00000
    [ 0.011778] CPU: Physical Processor ID: 0
    [ 0.011779] CPU: Processor Core ID: 0
    [ 0.011781] mce: CPU supports 6 MCE banks
    [ 0.011788] using AMD E400 aware idle routine
    [ 0.012331] ftrace: allocating 16774 entries in 66 pages
    [ 0.013474] ExtINT not setup in hardware but reported by MP table
    [ 0.013954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.049389] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
    [ 0.153335] Performance Events: AMD PMU driver.
    [ 0.153338] ... version: 0
    [ 0.153339] ... bit width: 48
    [ 0.153340] ... generic registers: 4
    [ 0.153341] ... value mask: 0000ffffffffffff
    [ 0.153342] ... max period: 00007fffffffffff
    [ 0.153344] ... fixed-purpose events: 0
    [ 0.153345] ... event mask: 000000000000000f
    [ 0.153372] System has AMD C1E enabled
    [ 0.153381] Switch to broadcast mode on CPU0
    [ 0.173363] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.199996] Booting Node 0, Processors #1
    [ 0.199998] smpboot cpu 1: start_ip = 9a000
    [ 0.296660] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.296660] Switch to broadcast mode on CPU1
    [ 0.316659] #2
    [ 0.316660] smpboot cpu 2: start_ip = 9a000
    [ 0.413323] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.413319] Switch to broadcast mode on CPU2
    [ 0.433315] #3 Ok.
    [ 0.433316] smpboot cpu 3: start_ip = 9a000
    [ 0.529987] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.529978] Switch to broadcast mode on CPU3
    [ 0.536635] Brought up 4 CPUs
    [ 0.536637] Total of 4 processors activated (25789.68 BogoMIPS).
    [ 0.540078] devtmpfs: initialized
    [ 0.541202] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
    [ 0.541202] print_constraints: dummy:
    [ 0.541202] NET: Registered protocol family 16
    [ 0.543338] node 0 link 0: io port [9000, ffff]
    [ 0.543340] TOM: 00000000c0000000 aka 3072M
    [ 0.543342] Fam 10h mmconf [e0000000, e00fffff]
    [ 0.543343] node 0 link 0: mmio [a0000, bffff]
    [ 0.543345] node 0 link 0: mmio [c0000000, dfffffff]
    [ 0.543347] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.543348] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff]
    [ 0.543351] TOM2: 0000000240000000 aka 9216M
    [ 0.543352] bus: [00, 08] on node 0 link 0
    [ 0.543354] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.543355] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.543357] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
    [ 0.543358] bus: 00 index 3 [mem 0xe0900000-0xffffffff]
    [ 0.543359] bus: 00 index 4 [mem 0xe0100000-0xe08fffff]
    [ 0.543361] bus: 00 index 5 [mem 0x240000000-0xfcffffffff]
    [ 0.543369] Extended Config Space enabled on 1 nodes
    [ 0.543426] PCI: Using configuration type 1 for base access
    [ 0.543427] PCI: Using configuration type 1 for extended access
    [ 0.543782] bio: create slab <bio-0> at 0
    [ 0.543782] ACPI: Interpreter disabled.
    [ 0.543782] vgaarb: loaded
    [ 0.543782] PCI: Probing PCI hardware
    [ 0.543782] PCI: Probing PCI hardware (bus 00)
    [ 0.543782] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
    [ 0.543782] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.543782] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.543782] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.543782] pci 0000:00:02.0: PME# disabled
    [ 0.543782] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
    [ 0.543782] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.543782] pci 0000:00:07.0: PME# disabled
    [ 0.543782] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
    [ 0.543782] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    [ 0.543782] pci 0000:00:09.0: PME# disabled
    [ 0.543782] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.543782] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.543782] pci 0000:00:0a.0: PME# disabled
    [ 0.543782] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [ 0.543782] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
    [ 0.543782] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.543782] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.543782] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.543782] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.543782] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.543782] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.543782] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.543782] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.543782] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
    [ 0.543782] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.543818] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.543835] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [ 0.543900] pci 0000:00:12.2: supports D1 D2
    [ 0.543901] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.543905] pci 0000:00:12.2: PME# disabled
    [ 0.543925] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.543937] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.543995] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
    [ 0.544007] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.544070] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.544088] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.544152] pci 0000:00:13.2: supports D1 D2
    [ 0.544154] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.544157] pci 0000:00:13.2: PME# disabled
    [ 0.544179] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.544264] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [ 0.544279] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.544287] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.544296] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.544305] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.544313] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
    [ 0.544358] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.544378] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.544431] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.544435] pci 0000:00:14.2: PME# disabled
    [ 0.544446] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.544515] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.544552] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [ 0.544564] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [ 0.544624] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [ 0.544636] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [ 0.544645] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [ 0.544655] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [ 0.544666] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [ 0.544682] PCI: peer root bus 00 res updated from pci conf
    [ 0.544710] pci 0000:01:00.0: [10b5:8647] type 1 class 0x000604
    [ 0.544718] pci 0000:01:00.0: reg 10: [mem 0xfdae0000-0xfdafffff]
    [ 0.544750] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.544753] pci 0000:01:00.0: PME# disabled
    [ 0.549971] pci 0000:00:02.0: PCI bridge to [bus 01-04]
    [ 0.549974] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
    [ 0.549977] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
    [ 0.549980] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.550020] pci 0000:02:04.0: [10b5:8647] type 1 class 0x000604
    [ 0.550059] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
    [ 0.550062] pci 0000:02:04.0: PME# disabled
    [ 0.550085] pci 0000:02:08.0: [10b5:8647] type 1 class 0x000604
    [ 0.550124] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
    [ 0.550127] pci 0000:02:08.0: PME# disabled
    [ 0.550153] pci 0000:01:00.0: PCI bridge to [bus 02-04]
    [ 0.550158] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
    [ 0.550161] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
    [ 0.550165] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.550203] pci 0000:03:00.0: [1002:9441] type 0 class 0x000300
    [ 0.550216] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.550226] pci 0000:03:00.0: reg 18: [mem 0xfd9e0000-0xfd9effff 64bit]
    [ 0.550233] pci 0000:03:00.0: reg 20: [io 0xce00-0xceff]
    [ 0.550246] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.550263] pci 0000:03:00.0: supports D1 D2
    [ 0.550281] pci 0000:03:00.1: [1002:aa30] type 0 class 0x000403
    [ 0.550294] pci 0000:03:00.1: reg 10: [mem 0xfd9fc000-0xfd9fffff 64bit]
    [ 0.550338] pci 0000:03:00.1: supports D1 D2
    [ 0.556639] pci 0000:02:04.0: PCI bridge to [bus 03-03]
    [ 0.556643] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
    [ 0.556646] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.556651] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.556692] pci 0000:04:00.0: [1002:9441] type 0 class 0x000380
    [ 0.556707] pci 0000:04:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.556719] pci 0000:04:00.0: reg 18: [mem 0xfd8f0000-0xfd8fffff 64bit]
    [ 0.556727] pci 0000:04:00.0: reg 20: [io 0xbe00-0xbeff]
    [ 0.556742] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.556762] pci 0000:04:00.0: supports D1 D2
    [ 0.563305] pci 0000:02:08.0: PCI bridge to [bus 04-04]
    [ 0.563310] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
    [ 0.563313] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
    [ 0.563317] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.563357] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.563369] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
    [ 0.563388] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.563401] pci 0000:05:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
    [ 0.563410] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.563436] pci 0000:05:00.0: supports D1 D2
    [ 0.563437] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.563441] pci 0000:05:00.0: PME# disabled
    [ 0.569972] pci 0000:00:07.0: PCI bridge to [bus 05-05]
    [ 0.569975] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
    [ 0.569977] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
    [ 0.569980] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.570011] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.570022] pci 0000:06:00.0: reg 10: [io 0xee00-0xeeff]
    [ 0.570042] pci 0000:06:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
    [ 0.570054] pci 0000:06:00.0: reg 20: [mem 0xfdde0000-0xfddeffff 64bit pref]
    [ 0.570063] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.570089] pci 0000:06:00.0: supports D1 D2
    [ 0.570090] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.570094] pci 0000:06:00.0: PME# disabled
    [ 0.576638] pci 0000:00:09.0: PCI bridge to [bus 06-06]
    [ 0.576640] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    [ 0.576643] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.576646] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.576676] pci 0000:07:00.0: [197b:2363] type 0 class 0x000101
    [ 0.576738] pci 0000:07:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
    [ 0.576769] pci 0000:07:00.0: PME# supported from D3hot
    [ 0.576773] pci 0000:07:00.0: PME# disabled
    [ 0.576793] pci 0000:07:00.1: [197b:2363] type 0 class 0x000101
    [ 0.576810] pci 0000:07:00.1: reg 10: [io 0xdf00-0xdf07]
    [ 0.576820] pci 0000:07:00.1: reg 14: [io 0xde00-0xde03]
    [ 0.576830] pci 0000:07:00.1: reg 18: [io 0xdd00-0xdd07]
    [ 0.576840] pci 0000:07:00.1: reg 1c: [io 0xdc00-0xdc03]
    [ 0.576849] pci 0000:07:00.1: reg 20: [io 0xdb00-0xdb0f]
    [ 0.576899] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.576908] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
    [ 0.576910] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.576913] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.576916] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.576949] pci 0000:08:07.0: [1814:0601] type 0 class 0x000280
    [ 0.576969] pci 0000:08:07.0: reg 10: [mem 0xfd7e0000-0xfd7effff]
    [ 0.577077] pci 0000:08:0e.0: [104c:8024] type 0 class 0x000c00
    [ 0.577098] pci 0000:08:0e.0: reg 10: [mem 0xfd7ff000-0xfd7ff7ff]
    [ 0.577110] pci 0000:08:0e.0: reg 14: [mem 0xfd7f8000-0xfd7fbfff]
    [ 0.577186] pci 0000:08:0e.0: supports D1 D2
    [ 0.577187] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot
    [ 0.577192] pci 0000:08:0e.0: PME# disabled
    [ 0.577223] pci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)
    [ 0.577227] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
    [ 0.577231] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
    [ 0.577235] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
    [ 0.577237] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.577239] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.577240] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.577242] pci 0000:00:14.4: bridge window [mem 0xe0900000-0xffffffff] (subtractive decode)
    [ 0.577244] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe08fffff] (subtractive decode)
    [ 0.577246] pci 0000:00:14.4: bridge window [mem 0x240000000-0xfcffffffff] (subtractive decode)
    [ 0.577716] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.578250] PCI: pci_cache_line_size set to 64 bytes
    [ 0.578257] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.578338] Expanded resource reserved due to conflict with PCI Bus #00
    [ 0.578340] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.578342] reserve RAM buffer: 00000000bfde0000 - 00000000bfffffff
    [ 0.578405] NetLabel: Initializing
    [ 0.578406] NetLabel: domain hash size = 128
    [ 0.578407] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.578416] NetLabel: unlabeled traffic allowed by default
    [ 0.582576] pnp: PnP ACPI: disabled
    [ 0.583349] PCI: max bus depth: 3 pci_try_num: 4
    [ 0.583381] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
    [ 0.583383] pci 0000:02:04.0: PCI bridge to [bus 03-03]
    [ 0.583385] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
    [ 0.583389] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.583392] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.583397] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
    [ 0.583398] pci 0000:02:08.0: PCI bridge to [bus 04-04]
    [ 0.583400] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
    [ 0.583403] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
    [ 0.583406] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.583410] pci 0000:01:00.0: PCI bridge to [bus 02-04]
    [ 0.583412] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
    [ 0.583416] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
    [ 0.583419] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.583423] pci 0000:00:02.0: PCI bridge to [bus 01-04]
    [ 0.583424] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
    [ 0.583427] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
    [ 0.583429] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.583432] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
    [ 0.583433] pci 0000:00:07.0: PCI bridge to [bus 05-05]
    [ 0.583435] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
    [ 0.583437] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
    [ 0.583439] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.583442] pci 0000:06:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
    [ 0.583444] pci 0000:00:09.0: PCI bridge to [bus 06-06]
    [ 0.583446] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    [ 0.583448] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.583450] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.583453] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
    [ 0.583455] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.583457] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.583459] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.583462] pci 0000:00:14.4: PCI bridge to [bus 08-08]
    [ 0.583464] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
    [ 0.583469] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
    [ 0.583472] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
    [ 0.583488] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 0.583491] pci 0000:00:02.0: setting latency timer to 64
    [ 0.583495] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 0.583498] pci 0000:01:00.0: setting latency timer to 64
    [ 0.583503] pci 0000:02:04.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 0.583506] pci 0000:02:04.0: setting latency timer to 64
    [ 0.583510] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 0.583513] pci 0000:02:08.0: setting latency timer to 64
    [ 0.583521] pci 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 19
    [ 0.583523] pci 0000:00:07.0: setting latency timer to 64
    [ 0.583530] pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 17
    [ 0.583532] pci 0000:00:09.0: setting latency timer to 64
    [ 0.583535] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 0.583537] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.583544] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.583545] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.583547] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xdfffffff]
    [ 0.583548] pci_bus 0000:00: resource 7 [mem 0xe0900000-0xffffffff]
    [ 0.583550] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe08fffff]
    [ 0.583551] pci_bus 0000:00: resource 9 [mem 0x240000000-0xfcffffffff]
    [ 0.583553] pci_bus 0000:01: resource 0 [io 0xb000-0xcfff]
    [ 0.583554] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfdafffff]
    [ 0.583556] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.583558] pci_bus 0000:02: resource 0 [io 0xb000-0xcfff]
    [ 0.583559] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd9fffff]
    [ 0.583561] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
    [ 0.583562] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.583564] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
    [ 0.583565] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.583567] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
    [ 0.583569] pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff]
    [ 0.583570] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.583572] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
    [ 0.583573] pci_bus 0000:05: resource 1 [mem 0xfd500000-0xfd5fffff]
    [ 0.583575] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.583576] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
    [ 0.583578] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.583579] pci_bus 0000:06: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.583581] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
    [ 0.583582] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.583584] pci_bus 0000:07: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.583586] pci_bus 0000:08: resource 0 [io 0x9000-0x9fff]
    [ 0.583587] pci_bus 0000:08: resource 1 [mem 0xfd700000-0xfd7fffff]
    [ 0.583589] pci_bus 0000:08: resource 2 [mem 0xfd600000-0xfd6fffff pref]
    [ 0.583590] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
    [ 0.583592] pci_bus 0000:08: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.583593] pci_bus 0000:08: resource 6 [mem 0xc0000000-0xdfffffff]
    [ 0.583595] pci_bus 0000:08: resource 7 [mem 0xe0900000-0xffffffff]
    [ 0.583596] pci_bus 0000:08: resource 8 [mem 0xe0100000-0xe08fffff]
    [ 0.583598] pci_bus 0000:08: resource 9 [mem 0x240000000-0xfcffffffff]
    [ 0.583619] NET: Registered protocol family 2
    [ 0.583770] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.584809] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.587809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.588112] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.588114] TCP reno registered
    [ 0.588124] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.588174] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.588275] NET: Registered protocol family 1
    [ 0.919963] pci 0000:03:00.0: Boot video device
    [ 0.919980] PCI: CLS 64 bytes, default 64
    [ 0.920026] Unpacking initramfs...
    [ 0.965040] Freeing initrd memory: 3540k freed
    [ 0.966631] PCI-DMA: Disabling AGP.
    [ 0.968974] PCI-DMA: aperture base @ b4000000 size 65536 KB
    [ 0.968975] PCI-DMA: using GART IOMMU.
    [ 0.968977] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.971843] platform rtc_cmos: registered platform RTC device (no PNP device found)
    [ 0.972020] IBS: LVT offset 1 assigned
    [ 0.972020] perf: AMD IBS detected (0x0000001f)
    [ 0.972020] audit: initializing netlink socket (disabled)
    [ 0.972020] type=2000 audit(1327614295.969:1): initialized
    [ 0.983339] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.013377] VFS: Disk quotas dquot_6.5.2
    [ 1.013418] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.013481] msgmni has been set to 15971
    [ 1.013571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.013571] io scheduler noop registered
    [ 1.013571] io scheduler deadline registered
    [ 1.013571] io scheduler cfq registered (default)
    [ 1.015654] pcieport 0000:00:02.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 1.015654] pcieport 0000:00:07.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
    [ 1.015654] pcieport 0000:00:09.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
    [ 1.015654] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
    [ 1.015654] pcieport 0000:01:00.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 1.015654] pcieport 0000:02:04.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:02:04.0: irq 45 for MSI/MSI-X
    [ 1.015654] pcieport 0000:02:08.0: setting latency timer to 64
    [ 1.015654] pcieport 0000:02:08.0: irq 46 for MSI/MSI-X
    [ 1.015654] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.036604] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.089984] Linux agpgart interface v0.103
    [ 1.089984] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 1.090029] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.090040] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.090949] mousedev: PS/2 mouse device common for all mice
    [ 1.090949] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
    [ 1.090949] rtc0: alarms up to one day, 114 bytes nvram
    [ 1.090949] cpuidle: using governor ladder
    [ 1.090949] cpuidle: using governor menu
    [ 1.090949] TCP cubic registered
    [ 1.090949] NET: Registered protocol family 17
    [ 1.090949] Registering the dns_resolver key type
    [ 1.090949] PM: Hibernation image not present or could not be loaded.
    [ 1.090949] registered taskstats version 1
    [ 1.096953] rtc_cmos rtc_cmos: setting system clock to 2012-01-26 21:44:57 UTC (1327614297)
    [ 1.096980] Initializing network drop monitor service
    [ 1.097877] Freeing unused kernel memory: 728k freed
    [ 1.098012] Write protecting the kernel read-only data: 8192k
    [ 1.102668] Freeing unused kernel memory: 1848k freed
    [ 1.104691] Freeing unused kernel memory: 696k freed
    [ 1.110427] udevd[88]: starting version 178
    [ 1.135385] SCSI subsystem initialized
    [ 1.138212] usbcore: registered new interface driver usbfs
    [ 1.138227] usbcore: registered new interface driver hub
    [ 1.138580] usbcore: registered new device driver usb
    [ 1.140963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.141074] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17
    [ 1.141108] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 1.141134] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.141143] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.141178] ehci_hcd 0000:00:12.2: debug port 1
    [ 1.141201] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [ 1.141313] libata version 3.00 loaded.
    [ 1.148154] Disabling lock debugging due to kernel taint
    [ 1.148174] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 1.149947] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.150125] hub 1-0:1.0: USB hub found
    [ 1.150131] hub 1-0:1.0: 6 ports detected
    [ 1.150373] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19
    [ 1.150416] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 1.153107] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
    [ 1.153224] fglrx: Unknown symbol acpi_lid_open (err 0)
    [ 1.153224] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
    [ 1.156619] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.156631] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.156658] ehci_hcd 0000:00:13.2: debug port 1
    [ 1.156682] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [ 1.157683] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
    [ 1.157800] fglrx: Unknown symbol acpi_lid_open (err 0)
    [ 1.157842] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
    [ 1.160890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.166602] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.166655] hub 2-0:1.0: USB hub found
    [ 1.166658] hub 2-0:1.0: 6 ports detected
    [ 1.166724] ahci 0000:00:11.0: version 3.0
    [ 1.166724] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22
    [ 1.166724] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
    [ 1.166785] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.166788] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 1.167127] scsi0 : ahci
    [ 1.167127] scsi1 : ahci
    [ 1.167127] scsi2 : ahci
    [ 1.167127] scsi3 : ahci
    [ 1.167127] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 47
    [ 1.167127] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 47
    [ 1.167127] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 47
    [ 1.167127] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 47
    [ 1.167127] ahci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 1.167127] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
    [ 1.167127] scsi4 : pata_atiixp
    [ 1.167127] scsi5 : pata_atiixp
    [ 1.167127] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [ 1.167127] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [ 1.167127] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16
    [ 1.167127] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 1.167127] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 1.167127] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [ 1.179950] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 1.179953] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 1.179957] ahci 0000:07:00.0: setting latency timer to 64
    [ 1.180169] scsi6 : ahci
    [ 1.180169] scsi7 : ahci
    [ 1.180169] ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
    [ 1.180169] ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
    [ 1.180169] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001)
    [ 1.180169] pata_acpi 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
    [ 1.180169] pata_acpi 0000:07:00.1: setting latency timer to 64
    [ 1.224303] hub 3-0:1.0: USB hub found
    [ 1.224303] hub 3-0:1.0: 3 ports detected
    [ 1.224334] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16
    [ 1.224334] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 1.224334] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 1.224334] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [ 1.280959] hub 4-0:1.0: USB hub found
    [ 1.280959] hub 4-0:1.0: 3 ports detected
    [ 1.280986] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 1.280986] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.280986] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.280986] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [ 1.333280] ata6.00: ATA-8: ST2000DM001-9YN164, CC96, max UDMA/133
    [ 1.333283] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.337945] hub 5-0:1.0: USB hub found
    [ 1.337945] hub 5-0:1.0: 3 ports detected
    [ 1.337978] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18
    [ 1.337978] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.337978] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.337978] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [ 1.359919] ata6.01: ATA-8: ST31000528AS, CC34, max UDMA/133
    [ 1.359922] ata6.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.373275] ata6.00: configured for UDMA/100
    [ 1.394288] hub 6-0:1.0: USB hub found
    [ 1.394288] hub 6-0:1.0: 3 ports detected
    [ 1.394311] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18
    [ 1.394311] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.394311] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.394311] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [ 1.436583] ata6.01: configured for UDMA/100
    [ 1.450961] hub 7-0:1.0: USB hub found
    [ 1.450961] hub 7-0:1.0: 2 ports detected
    [ 1.489926] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.493261] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.499923] ata7: SATA link down (SStatus 0 SControl 300)
    [ 1.499932] ata8: SATA link down (SStatus 0 SControl 300)
    [ 1.649914] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.649910] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
    [ 1.653237] ata3.00: configured for UDMA/100
    [ 1.653263] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
    [ 1.655553] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.676566] ata4.00: HPA detected: current 586070255, native 586072368
    [ 1.676570] ata4.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
    [ 1.676570] ata4.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.686562] ata4.00: configured for UDMA/133
    [ 1.686604] scsi 3:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
    [ 1.686689] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC96 PQ: 0 ANSI: 5
    [ 1.686712] scsi 5:0:1:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
    [ 1.687055] pata_jmicron 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
    [ 1.687055] pata_jmicron 0000:07:00.1: setting latency timer to 64
    [ 1.687055] sd 3:0:0:0: [sda] 586070255 512-byte logical blocks: (300 GB/279 GiB)
    [ 1.687055] sd 3:0:0:0: [sda] Write Protect is off
    [ 1.687055] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.687055] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.687055] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 1.687055] sd 5:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.687055] sd 5:0:0:0: [sdb] Write Protect is off
    [ 1.687055] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.687055] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.687055] sd 5:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.687055] sd 5:0:1:0: [sdc] Write Protect is off
    [ 1.687055] sd 5:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.687055] sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.687055] scsi8 : pata_jmicron
    [ 1.687055] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.687055] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.689935] scsi9 : pata_jmicron
    [ 1.690067] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
    [ 1.690067] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
    [ 1.690067] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.706564] usb 3-3: new low-speed USB device number 2 using ohci_hcd
    [ 1.709922] sdb: sdb1 sdb2
    [ 1.710504] sda: sda1 sda2 sda3 sda4
    [ 1.710517] sda: p4 size 20969472 extends beyond EOD, enabling native capacity
    [ 1.710517] ata4: hard resetting link
    [ 1.726599] sdc: sdc1
    [ 1.731420] sd 5:0:0:0: [sdb] Attached SCSI disk
    [ 1.736584] sd 5:0:1:0: [sdc] Attached SCSI disk
    [ 1.896683] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
    [ 1.897345] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
    [ 1.906614] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input1
    [ 1.907285] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
    [ 1.907285] usbcore: registered new interface driver usbhid
    [ 1.907285] usbhid: USB HID core driver
    [ 1.973212] Switching to clocksource tsc
    [ 2.129599] usb 4-1: new low-speed USB device number 2 using ohci_hcd
    [ 2.193273] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.208095] ata4.00: n_sectors mismatch 586070255 != 586072368
    [ 2.208098] ata4.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
    [ 2.216578] ata4.00: configured for UDMA/133
    [ 2.216582] ata4: EH complete
    [ 2.216668] sd 3:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
    [ 2.216905] sda: detected capacity change from 300067970560 to 300069052416
    [ 2.243307] sda: sda1 sda2 sda3 sda4
    [ 2.243590] sd 3:0:0:0: [sda] Attached SCSI disk
    [ 2.341779] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2
    [ 2.341812] generic-usb 0003:0458:0708.0003: input,hidraw2: USB HID v1.11 Keyboard [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input0
    [ 2.361632] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input3
    [ 2.361681] generic-usb 0003:0458:0708.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input1
    [ 2.939621] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.992107] udevd[243]: starting version 178
    [ 4.220355] EDAC MC: Ver: 2.1.0
    [ 4.223287] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.260077] MCE: In-kernel MCE decoding enabled.
    [ 4.265446] AMD64 EDAC driver v3.4.0
    [ 4.265512] EDAC amd64: DRAM ECC disabled.
    [ 4.265519] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [ 4.265520] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [ 4.265521] (Note that use of the override may cause unknown side effects.)
    [ 4.289047] firewire_ohci 0000:08:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 22
    [ 4.309438] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.309453] r8169 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
    [ 4.309480] r8169 0000:05:00.0: setting latency timer to 64
    [ 4.309519] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
    [ 4.309671] r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc900017a0000, 00:24:1d:76:91:9c, XID 1c4000c0 IRQ 48
    [ 4.309673] r8169 0000:05:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.309707] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.309719] r8169 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
    [ 4.309732] r8169 0000:06:00.0: setting latency timer to 64
    [ 4.309766] r8169 0000:06:00.0: irq 49 for MSI/MSI-X
    [ 4.309895] r8169 0000:06:00.0: eth1: RTL8168c/8111c at 0xffffc9000175a000, 00:24:1d:76:91:9e, XID 1c4000c0 IRQ 49
    [ 4.309898] r8169 0000:06:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.319010] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.319060] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.339695] firewire_ohci: Added fw-ohci device 0000:08:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.347192] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.368446] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.439847] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
    [ 4.439887] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
    [ 4.440213] fglrx: Unknown symbol acpi_lid_open (err 0)
    [ 4.440242] fglrx: Unknown symbol acpi_lid_open (err 0)
    [ 4.440372] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
    [ 4.440384] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
    [ 4.518173] rt2800pci 0000:08:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21
    [ 4.546577] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 4.546764] Registered led device: rt2800pci-phy0::radio
    [ 4.546777] Registered led device: rt2800pci-phy0::assoc
    [ 4.546791] Registered led device: rt2800pci-phy0::quality
    [ 4.566190] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
    [ 4.712416] hda_codec: ALC889A: BIOS auto-probing.
    [ 4.729011] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 4.729173] snd_hda_intel 0000:03:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
    [ 4.729237] snd_hda_intel 0000:03:00.1: irq 50 for MSI/MSI-X
    [ 4.729256] snd_hda_intel 0000:03:00.1: setting latency timer to 64
    [ 4.743475] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 4.743566] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:04.0/0000:03:00.1/sound/card1/input6
    [ 4.839477] firewire_core: created device fw0: GUID 00aa981000001fd0, S400
    [ 5.683949] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 5.731153] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.795031] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.871329] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.885607] Adding 10484732k swap on /dev/sda4. Priority:-1 extents:1 across:10484732k
    [ 6.915362] r8169 0000:05:00.0: eth0: link down
    [ 6.915375] r8169 0000:05:00.0: eth0: link down
    [ 8.609247] r8169 0000:05:00.0: eth0: link up
    [faktorqm@the_missile /]$
    note 7:
    [faktorqm@the_missile /]$ lspci
    00:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part
    00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
    00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
    00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
    00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
    00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
    00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
    00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
    00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
    00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
    00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
    00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
    00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
    02:04.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
    02:08.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
    03:00.0 VGA compatible controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
    03:00.1 Audio device: ATI Technologies Inc RV770 HDMI Audio [Radeon HD 4850/4870]
    04:00.0 Display controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
    07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
    08:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
    08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
    [faktorqm@the_missile /]$
    note 8:
    [root@the_missile /]# cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:3:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    [root@the_missile /]#
    Now, the problem:
    [root@the_missile /]# modprobe -vvvv fglrx
    insmod /lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz
    libkmod: kmod_module_insert_module: Failed to insert module '/lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz': No such device
    [root@the_missile /]#
    now, if you see menu.lst from grub, I disabled acpi because the kernel never boot if that option is not especified. I tried with acpi=noirq and acpi=force and the kernel never boot. So, I don't have a solution in my mind, and I don't know one path to follow. If someone can give me just an idea of what happend, I will really appreciate that.
    KDE works fine, and X starts fine.
    pages that I read:
    https://wiki.archlinux.org/index.php/ATI_Catalyst
    https://bbs.archlinux.org/viewtopic.php?id=79509 (what's about this??)
    https://bbs.archlinux.org/viewtopic.php?id=123669
    and many many others pages talking about acpi, lacpi, apic, etc.
    Thank you for your time in advance. Regards!!
    Last edited by faktorqm (2012-01-27 02:25:31)

    I forgot to mention that I blacklisted the radeon module following the new procedure in /etc/modprobe.d/blacklist.conf and the contest of this file is "blacklist radeon" and my rc.conf is:
    [faktorqm@the_missile /]$ cat /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="localtime"
    TIMEZONE="America/Argentina/Buenos_Aires"
    KEYMAP="bg-cp855"
    CONSOLEFONT="cp850-8x16"
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="the_missile"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(autofglrx hwclock syslog-ng network netfs crond kdm)
    [faktorqm@the_missile /]$
    THANK YOU AGAIN!! Regards!!
    Last edited by faktorqm (2012-01-27 02:26:15)

  • [SOLVED] No prompt after update to 3.3.6-1-ARCH

    After doing an upgrade and a reboot (fail save, the otherone doesn't work) my arch stopped working (booting)
    Linux janus 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64 GNU/Linux
    /boot/grub/menu.lst:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-label/root ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/disk/by-label/root ro
    initrd /kernel26-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="yes"
    HARDWARECLOCK=""
    TIMEZONE=""
    KEYMAP="de_CH-latin1"
    CONSOLEFONT="Lat2-Terminus16"
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    MODULES=()
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="yes"
    # NETWORKING
    HOSTNAME="janus"
    interface=eth0
    address=172.16.0.8
    netmask=255.255.0.0
    gateway=172.16.0.1
    NETWORK_PERSIST="yes"
    # DAEMONS
    #DAEMONS=( syslog-ng crond network nfs-common dnsmasq sshd ntpd @httpd !netfs @samba @nfs-server @munin-node @minidlna @logitechmediaserver @transmissiond @randomsound )
    DAEMONS=( syslog-ng crond network dnsmasq sshd )
    dmesg
    [ 0.907376] msgmni has been set to 3989
    [ 0.908073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.908205] io scheduler noop registered
    [ 0.908216] io scheduler deadline registered
    [ 0.908403] io scheduler cfq registered (default)
    [ 0.908722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.908919] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
    [ 0.909085] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [ 0.909487] intel_idle: MWAIT substates: 0x10
    [ 0.909523] intel_idle: v0.4 model 0x1C
    [ 0.909530] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.909674] GHES: HEST is not enabled!
    [ 0.909882] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.911088] Linux agpgart interface v0.103
    [ 0.911316] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.914487] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.914596] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.915020] mousedev: PS/2 mouse device common for all mice
    [ 0.915192] rtc_cmos 00:03: RTC can wake from S4
    [ 0.915505] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.915549] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.915691] cpuidle: using governor ladder
    [ 0.915842] cpuidle: using governor menu
    [ 0.916378] TCP cubic registered
    [ 0.916798] NET: Registered protocol family 10
    [ 0.918019] NET: Registered protocol family 17
    [ 0.918035] Registering the dns_resolver key type
    [ 0.918552] PM: Hibernation image not present or could not be loaded.
    [ 0.918576] registered taskstats version 1
    [ 0.919485] rtc_cmos 00:03: setting system clock to 2012-05-22 20:49:54 UTC (1337719794)
    [ 0.919617] Initializing network drop monitor service
    [ 0.923155] Freeing unused kernel memory: 732k freed
    [ 0.923689] Write protecting the kernel read-only data: 8192k
    [ 0.937719] Freeing unused kernel memory: 1632k freed
    [ 0.944939] Freeing unused kernel memory: 656k freed
    [ 0.972274] udevd[47]: starting version 182
    [ 1.081877] SCSI subsystem initialized
    [ 1.087149] libata version 3.00 loaded.
    [ 1.090150] ata_piix 0000:00:1f.1: version 2.13
    [ 1.090166] sata_promise 0000:04:00.0: version 2.12
    [ 1.090320] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.096448] scsi0 : sata_promise
    [ 1.098921] scsi1 : sata_promise
    [ 1.101399] scsi2 : sata_promise
    [ 1.101689] scsi3 : ata_piix
    [ 1.101855] scsi4 : sata_promise
    [ 1.102566] ata3: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120380 irq 21
    [ 1.102582] ata4: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120280 irq 21
    [ 1.102594] ata5: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120200 irq 21
    [ 1.102608] ata6: SATA max UDMA/133 mmio m4096@0x88120000 ata 0x88120300 irq 21
    [ 1.103448] scsi5 : ata_piix
    [ 1.105045] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
    [ 1.105061] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
    [ 1.105184] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.105857] ata2: port disabled--ignoring
    [ 1.256766] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.257277] ata1.00: ATAPI: DVDRW IDE 16X, VER A187, max UDMA/66
    [ 1.258236] scsi6 : ata_piix
    [ 1.258557] scsi7 : ata_piix
    [ 1.259078] ata7: SATA max UDMA/133 cmd 0x30c8 ctl 0x30ec bmdma 0x30a0 irq 19
    [ 1.259088] ata8: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e8 bmdma 0x30a8 irq 19
    [ 1.263788] ata1.00: configured for UDMA/66
    [ 1.426964] ata8.00: ATA-7: SAMSUNG MMCRE64G5MXP-0VB, VBM1801Q, max UDMA/100
    [ 1.426973] ata8.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.433610] ata8.00: configured for UDMA/100
    [ 1.573416] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.590528] ata3.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
    [ 1.590536] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    [ 1.597178] ata3.00: configured for UDMA/133
    [ 1.597532] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
    [ 2.070084] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.080650] ata4.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
    [ 2.080660] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    [ 2.087660] ata4.00: configured for UDMA/133
    [ 2.088031] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
    [ 2.560084] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.580228] ata5.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
    [ 2.580238] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    [ 2.587208] ata5.00: configured for UDMA/133
    [ 2.587512] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
    [ 3.060083] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.073646] ata6.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
    [ 3.073655] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    [ 3.080536] ata6.00: configured for UDMA/133
    [ 3.080840] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
    [ 3.081826] scsi 3:0:0:0: CD-ROM DVDRW IDE 16X A187 PQ: 0 ANSI: 5
    [ 3.082680] scsi 7:0:0:0: Direct-Access ATA SAMSUNG MMCRE64G VBM1 PQ: 0 ANSI: 5
    [ 3.118717] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.118994] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.119057] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.119069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.119083] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.119315] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.119341] sd 1:0:0:0: [sdb] Write Protect is off
    [ 3.119365] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.119402] sd 2:0:0:0: [sdc] Write Protect is off
    [ 3.119415] sd 7:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 3.119440] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 3.119506] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.119590] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.119688] sd 4:0:0:0: [sdd] Write Protect is off
    [ 3.119701] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    [ 3.119745] sd 7:0:0:0: [sde] Write Protect is off
    [ 3.119755] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 3.119838] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.119861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.119886] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.125924] sde: sde1 sde2 sde3 sde4
    [ 3.128350] sda: unknown partition table
    [ 3.131954] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.133210] sd 7:0:0:0: [sde] Attached SCSI disk
    [ 3.134133] sdc: unknown partition table
    [ 3.135456] sdd: unknown partition table
    [ 3.135487] sd 2:0:0:0: [sdc] Attached SCSI disk
    [ 3.136456] sd 4:0:0:0: [sdd] Attached SCSI disk
    [ 3.138525] sdb: unknown partition table
    [ 3.139382] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 3.143991] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
    [ 3.144009] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.145875] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 3.283989] device-mapper: uevent: version 1.0.3
    [ 3.284363] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 3.360761] EXT4-fs (sde3): INFO: recovery required on readonly filesystem
    [ 3.360771] EXT4-fs (sde3): write access will be enabled during recovery
    [ 3.703310] EXT4-fs (sde3): recovery complete
    [ 3.703711] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.872439] udevd[356]: starting version 182
    [ 5.987333] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 5.987361] ACPI: Sleep Button [SLPB]
    [ 5.987585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 5.987600] ACPI: Power Button [PWRF]
    [ 6.015516] FDC 0 is a post-1991 82077
    [ 6.039298] agpgart-intel 0000:00:00.0: Intel 945G Chipset
    [ 6.039565] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
    [ 6.039806] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 6.045341] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.045543] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
    [ 6.047332] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xffffc90000350000, 00:27:0e:08:17:26, XID 1c4000c0 IRQ 43
    [ 6.047347] r8169 0000:01:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 6.047517] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x80000000
    [ 6.064277] usbcore: registered new interface driver usbfs
    [ 6.064399] usbcore: registered new interface driver hub
    [ 6.074606] usbcore: registered new device driver usb
    [ 6.093710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.093975] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 6.093990] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 6.094157] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 6.094233] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [ 6.094258] ehci_hcd 0000:00:1d.7: debug port 1
    [ 6.096239] intel_rng: Firmware space is locked read-only. If you can't or
    [ 6.096246] intel_rng: don't want to disable this in firmware setup, and if
    [ 6.096250] intel_rng: you are certain that your system has a functional
    [ 6.096254] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 6.098182] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 6.098251] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x883a4000
    [ 6.106891] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 6.108800] hub 1-0:1.0: USB hub found
    [ 6.108829] hub 1-0:1.0: 8 ports detected
    [ 6.114693] uhci_hcd: USB Universal Host Controller Interface driver
    [ 6.114930] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 6.114943] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 6.115013] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 6.115073] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    [ 6.116010] md: bind<sdb>
    [ 6.116313] leds_ss4200: no LED devices found
    [ 6.121149] [drm] Initialized drm 1.1.0 20060810
    [ 6.129071] hub 2-0:1.0: USB hub found
    [ 6.129105] hub 2-0:1.0: 2 ports detected
    [ 6.129668] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 6.129682] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 6.129728] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 6.129801] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    [ 6.130542] hub 3-0:1.0: USB hub found
    [ 6.130566] hub 3-0:1.0: 2 ports detected
    [ 6.130984] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 6.130998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 6.131046] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 6.131152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
    [ 6.135543] hub 4-0:1.0: USB hub found
    [ 6.135576] hub 4-0:1.0: 2 ports detected
    [ 6.138604] md: bind<sda>
    [ 6.141980] iTCO_vendor_support: vendor-support=0
    [ 6.143676] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 6.143688] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 6.143728] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 6.143799] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
    [ 6.144926] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 6.145255] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
    [ 6.145488] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.146421] hub 5-0:1.0: USB hub found
    [ 6.146443] hub 5-0:1.0: 2 ports detected
    [ 6.147012] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 6.179903] input: PC Speaker as /devices/platform/pcspkr/input/input2
    [ 6.183546] md: bind<sdc>
    [ 6.197452] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
    [ 6.215986] md: bind<sdd>
    [ 6.234886] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [ 6.237154] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 6.242659] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 6.247410] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 6.247627] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.252088] i915 0000:00:02.0: setting latency timer to 64
    [ 6.296941] raid6: int64x1 269 MB/s
    [ 6.354237] raid6: int64x2 416 MB/s
    [ 6.357354] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.357365] [drm] Driver supports precise vblank timestamp query.
    [ 6.357537] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.410098] raid6: int64x4 430 MB/s
    [ 6.466761] raid6: int64x8 472 MB/s
    [ 6.523430] raid6: sse2x1 596 MB/s
    [ 6.580084] raid6: sse2x2 1096 MB/s
    [ 6.586778] usb 3-2: new low-speed USB device number 2 using uhci_hcd
    [ 6.636699] raid6: sse2x4 1543 MB/s
    [ 6.636707] raid6: using algorithm sse2x4 (1543 MB/s)
    [ 6.638081] async_tx: api initialized (async)
    [ 6.639298] xor: automatically using best checksumming function: generic_sse
    [ 6.653360] generic_sse: 4777.200 MB/sec
    [ 6.653369] xor: using function: generic_sse (4777.200 MB/sec)
    [ 6.662829] md: raid6 personality registered for level 6
    [ 6.662838] md: raid5 personality registered for level 5
    [ 6.662843] md: raid4 personality registered for level 4
    [ 6.663610] bio: create slab <bio-1> at 1
    [ 6.663631] md/raid:md127: not clean -- starting background reconstruction
    [ 6.663682] md/raid:md127: device sdd operational as raid disk 3
    [ 6.663692] md/raid:md127: device sdc operational as raid disk 2
    [ 6.663701] md/raid:md127: device sda operational as raid disk 0
    [ 6.663709] md/raid:md127: device sdb operational as raid disk 1
    [ 6.664617] md/raid:md127: allocated 4300kB
    [ 6.664832] md/raid:md127: raid level 5 active with 4 out of 4 devices, algorithm 2
    [ 6.664839] RAID conf printout:
    [ 6.664843] --- level:5 rd:4 wd:4
    [ 6.664849] disk 0, o:1, dev:sda
    [ 6.664854] disk 1, o:1, dev:sdb
    [ 6.664858] disk 2, o:1, dev:sdc
    [ 6.664863] disk 3, o:1, dev:sdd
    [ 6.664967] md127: detected capacity change from 0 to 3000614387712
    [ 6.669170] md127: unknown partition table
    [ 6.797420] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
    [ 6.797905] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input0
    [ 6.821245] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input10
    [ 6.821839] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input1
    [ 6.821926] usbcore: registered new interface driver usbhid
    [ 6.821934] usbhid: USB HID core driver
    [ 7.139480] [drm] initialized overlay support
    [ 7.359988] fbcon: inteldrmfb (fb0) is primary device
    [ 7.444647] Console: switching to colour frame buffer device 210x65
    [ 7.464949] fb0: inteldrmfb frame buffer device
    [ 7.464954] drm: registered panic notifier
    [ 7.465069] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.257757] EXT4-fs (sde3): re-mounted. Opts: discard
    [ 8.331371] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: discard
    [ 8.359096] EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: discard
    [ 9.337971] r8169 0000:01:00.0: eth0: link down
    [ 9.337993] r8169 0000:01:00.0: eth0: link down
    [ 9.338818] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.264950] r8169 0000:01:00.0: eth0: link up
    [ 11.265995] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 21.936743] eth0: no IPv6 routers present
    this machine has run for five years now. but here I'm stuck. The last message is from the SSHd being started. I can logon to it on a SSH but the machine itself won't start a shell..
    what's up?
    Last edited by theking2 (2012-05-23 09:36:02)

    @Gcool: no nothing happens it is the last line on the console. As it is normally a headless I don't have X11 active.
    I not always scrutinize the packets that are updated and do a pacman -Syu on a monthly basis.
    It boots to runlevel 3 which it does but than is stuck when the last daemon (successfully) loads
    It is a file server and I do use md and lvm2 though. My guess is that for some reason the system wasn't shutdown correctly causing the RAID5 to become instable and being resyncd as we speak. But I'm happy to already have the sshd working and could start repairs.
    the last bit of pacman.log:
    [2012-05-17 13:57] ==> Image generation successful
    [2012-05-17 13:57] upgraded linux (3.3.4-2 -> 3.3.6-1)
    [2012-05-17 13:57] upgraded linux-headers (3.3.4-2 -> 3.3.6-1)
    [2012-05-17 13:57] upgraded man-pages (3.39-1 -> 3.41-1)
    [2012-05-17 13:57] upgraded sqlite (3.7.11-2 -> 3.7.12-1)
    [2012-05-17 13:57] upgraded minidlna (1.0.24-3 -> 1.0.24-4)
    [2012-05-17 13:57] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
    [2012-05-17 13:57] upgraded mpg123 (1.14.0-1 -> 1.14.2-1)
    [2012-05-17 13:57] upgraded perl-log-log4perl (1.35-1 -> 1.36-1)
    [2012-05-17 13:57] upgraded munin-node (1.4.6-2 -> 1.4.7-1)
    [2012-05-17 13:57] upgraded munin (1.4.6-2 -> 1.4.7-1)
    [2012-05-17 13:57] upgraded ntfs-3g (2012.1.15-2 -> 2012.1.15-3)
    [2012-05-17 13:58] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
    [2012-05-17 13:58] upgraded php (5.3.12-1 -> 5.4.3-1)
    [2012-05-17 13:58] upgraded php-apache (5.3.12-1 -> 5.4.3-1)
    [2012-05-17 13:58] upgraded powertop (1.13-3 -> 2.0-1)
    [2012-05-17 13:58] upgraded vim-runtime (7.3.495-3 -> 7.3.515-1)
    [2012-05-17 13:58] upgraded vim (7.3.495-3 -> 7.3.515-1)
    [2012-05-17 13:58] upgraded xterm (278-1 -> 279-1)
    [2012-05-17 15:06] Running 'pacman -S upower'
    [2012-05-17 15:06] installed polkit (0.105-1)
    [2012-05-17 15:06] installed pm-quirks (0.20100619-2)
    [2012-05-17 15:06] installed pm-utils (1.4.1-4)
    [2012-05-17 15:06] installed dbus-glib (0.98-1)
    [2012-05-17 15:06] installed usbmuxd (1.0.7-3)
    [2012-05-17 15:06] installed libplist (1.8-2)
    [2012-05-17 15:06] installed libimobiledevice (1.1.1-3)
    [2012-05-17 15:06] installed upower (0.9.16-1)
    [2012-05-17 16:11] Running 'pacman -S --asdeps perl-config-general libxslt'
    [2012-05-17 16:12] Running 'pacman -U /home/j/dev/tgt/perl_conig_general/perl-config-general/perl-config-general-2.50-2-x86_64.pkg.tar.xz'
    [2012-05-17 16:12] installed perl-config-general (2.50-2)
    [2012-05-17 16:12] Running 'pacman -S --asdeps libxslt'
    [2012-05-17 16:12] installed libxslt (1.1.26-3)
    [2012-05-17 16:21] Running 'pacman -U /home/j/dev/tgt/tgt/tgt-1.0.26-2-x86_64.pkg.tar.xz'
    [2012-05-17 16:22] installed tgt (1.0.26-2)
    [2012-05-17 16:38] Running 'pacman -S sg_inq'
    [2012-05-17 16:49] Running 'pacman -R iscsi-tgt'
    [2012-05-17 16:49] Running 'pacman -R tgt'
    [2012-05-17 16:49] warning: /etc/tgt/targets.conf saved as /etc/tgt/targets.conf.pacsave
    [2012-05-17 16:49] removed tgt (1.0.26-2)
    [2012-05-17 16:50] Running 'pacman -R perl-config-general libxslt'
    [2012-05-17 16:50] removed libxslt (1.1.26-3)
    [2012-05-17 16:50] removed perl-config-general (2.50-2)
    [2012-05-22 23:26] Running 'pacman -Syu'
    [2012-05-22 23:26] synchronizing package lists
    [2012-05-22 23:26] starting full system upgrade
    [2012-05-22 23:29] upgraded libcups (1.5.2-2 -> 1.5.3-1)
    [2012-05-22 23:29] upgraded libglapi (8.0.2-1 -> 8.0.3-1)
    [2012-05-22 23:29] upgraded libgl (8.0.2-1 -> 8.0.3-1)
    [2012-05-22 23:29] upgraded libnl (3.2.7-1 -> 3.2.9-1)
    [2012-05-22 23:29] upgraded mdadm (3.2.3-3 -> 3.2.4-1)
    [2012-05-22 23:29] upgraded sqlite (3.7.12-1 -> 3.7.12-2)
    [2012-05-22 23:30] upgraded subversion (1.7.4-3 -> 1.7.5-1)
    [2012-05-22 23:30] upgraded sudo (1.8.4.p4-1 -> 1.8.5.p1-1)

  • [SOLVED] Kernel panic at boot due to root FS not found

    When I try to boot using a new kernel version (eg. 3.0.1 or 2.6.39), I get a kernel panic with an "init not found" error message. I haven't been able to get any more detailed error messages, but I assume that there's a problem with finding or mounting my root filesystem.
    For now, I'm stuck with 2.6.38.7-1, which boots without any problems. (I keep trying the new kernel, then rolling it back using a Live CD.)
    I have a shared EXT4 root and boot partition, and I'm using Grub 0.97. Other than that, I'm not sure what information would be helpful in tracking down this problem, and any help would be appreciated.
    Last edited by dcecile (2011-08-10 00:41:46)

    No problem.
    Here's my full Grub. It has a lot of trial-and-error entries, and I made *-old copies of my 2.6.38 kernel files:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 2
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    title Arch Linux
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Fallback
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux-fallback.img
    title Arch Linux Ext4
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux-ext4.img
    title Arch Linux Log
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Break
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro rootwait break=y panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Nonboot Log
    root (hd0,2)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /initramfs-linux.img
    title Arch Linux Baduuid Log
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/1ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux LTS
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-lts.img
    title Arch Linux LTS Fallback
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-lts-fallback.img
    title Arch Linux LTS Log
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/kernel26-lts.img
    title Arch Linux Old
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old.img
    title Arch Linux Old Fallback
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old-fallback.img
    title Arch Linux Old Log
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/kernel26-old.img
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    This is the 3.0 entry that doesn't work:
    title Arch Linux
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    And this is the 2.6.38 entry that does work:
    title Arch Linux Old
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old.img
    Here's "lsinitcpio /boot/initramfs-linux.img":
    ./etc
    ./etc/udev
    ./etc/udev/udev.conf
    ./etc/modprobe.d
    ./etc/modprobe.d/usb-load-ehci-first.conf
    ./init
    ./init_functions
    ./bin
    ./bin/busybox
    ./sys
    ./proc
    ./dev
    ./hooks
    ./hooks/udev
    ./run
    ./config
    ./usr
    ./usr/bin
    ./usr/sbin
    ./lib
    ./lib/udev
    ./lib/udev/usb_id
    ./lib/udev/firmware
    ./lib/udev/scsi_id
    ./lib/udev/path_id
    ./lib/udev/ata_id
    ./lib/udev/rules.d
    ./lib/udev/rules.d/50-udev-default.rules
    ./lib/udev/rules.d/80-drivers.rules
    ./lib/udev/rules.d/50-firmware.rules
    ./lib/udev/rules.d/60-persistent-storage.rules
    ./lib/modules
    ./lib/modules/3.0-ARCH
    ./lib/modules/3.0-ARCH/modules.alias.bin
    ./lib/modules/3.0-ARCH/modules.symbols.bin
    ./lib/modules/3.0-ARCH/kernel
    ./lib/modules/3.0-ARCH/kernel/fs
    ./lib/modules/3.0-ARCH/kernel/fs/ext4
    ./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
    ./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
    ./lib/modules/3.0-ARCH/kernel/fs/jbd2
    ./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound
    ./lib/modules/3.0-ARCH/kernel/sound/core
    ./lib/modules/3.0-ARCH/kernel/sound/core/seq
    ./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers
    ./lib/modules/3.0-ARCH/kernel/drivers/ata
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/core
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video
    ./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
    ./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/input
    ./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/lib
    ./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
    ./lib/modules/3.0-ARCH/modules.dep.bin
    ./sbin
    ./sbin/blkid
    ./sbin/udevadm
    ./sbin/modprobe
    ./sbin/udevd

  • Nouveau problem after update

    I installed the system (latest ISO release), and updated it with "# pacman -Syu" (kernel updated from 2.6.33 to 2.6.34) and rebooted.
    Now, when the booting log is coming to udev, the monitor just is turning off, it doesn't receive any signal, the led is blinking.
    I booted from the CD and blacklisted nouveau in rc.conf, then I could boot the system, here is the log file when it tried nouveau:
    Jul 21 00:40:46 linux shutdown[18098]: shutting down for system reboot
    Jul 21 00:40:46 linux init: Switching to runlevel: 6
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuset
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpu
    Jul 21 00:42:19 linux kernel: Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
    Jul 21 00:42:19 linux kernel: Command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    Jul 21 00:42:19 linux kernel: BIOS-provided physical RAM map:
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    Jul 21 00:42:19 linux kernel: NX (Execute Disable) protection: active
    Jul 21 00:42:19 linux kernel: DMI 2.4 present.
    Jul 21 00:42:19 linux kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    Jul 21 00:42:19 linux kernel: No AGP bridge found
    Jul 21 00:42:19 linux kernel: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    Jul 21 00:42:19 linux kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jul 21 00:42:19 linux kernel: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
    Jul 21 00:42:19 linux kernel: Scanning 0 areas for low memory corruption
    Jul 21 00:42:19 linux kernel: modified physical RAM map:
    Jul 21 00:42:19 linux kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
    Jul 21 00:42:19 linux kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000000e4000 - 0000000000100000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000000100000 - 00000000cff80000 (usable)
    Jul 21 00:42:19 linux kernel: modified: 00000000cff80000 - 00000000cff8e000 (ACPI data)
    Jul 21 00:42:19 linux kernel: modified: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
    Jul 21 00:42:19 linux kernel: modified: 00000000cffe0000 - 00000000d0000000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 00000000fff00000 - 0000000100000000 (reserved)
    Jul 21 00:42:19 linux kernel: modified: 0000000100000000 - 0000000130000000 (usable)
    Jul 21 00:42:19 linux kernel: found SMP MP-table at [ffff8800000ff780] ff780
    Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000000000000-00000000cff80000
    Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000100000000-0000000130000000
    Jul 21 00:42:19 linux kernel: RAMDISK: 37cb2000 - 37ff0000
    Jul 21 00:42:19 linux kernel: ACPI: RSDP 00000000000fbcc0 00014 (v00 ACPIAM)
    Jul 21 00:42:19 linux kernel: ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: DSDT 00000000cff805c0 090B7 (v01 A0753 A0753001 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: FACS 00000000cff8e000 00040
    Jul 21 00:42:19 linux kernel: ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: HPET 00000000cff89680 00038 (v01 A_M_I_ OEMHPET 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: ACPI: OSFR 00000000cff896c0 000B0 (v01 A_M_I_ OEMOSFR 12000711 MSFT 00000097)
    Jul 21 00:42:19 linux kernel: Zone PFN ranges:
    Jul 21 00:42:19 linux kernel: DMA 0x00000010 -> 0x00001000
    Jul 21 00:42:19 linux kernel: DMA32 0x00001000 -> 0x00100000
    Jul 21 00:42:19 linux kernel: Normal 0x00100000 -> 0x00130000
    Jul 21 00:42:19 linux kernel: Movable zone start PFN for each node
    Jul 21 00:42:19 linux kernel: early_node_map[3] active PFN ranges
    Jul 21 00:42:19 linux kernel: 0: 0x00000010 -> 0x0000009f
    Jul 21 00:42:19 linux kernel: 0: 0x00000100 -> 0x000cff80
    Jul 21 00:42:19 linux kernel: 0: 0x00100000 -> 0x00130000
    Jul 21 00:42:19 linux kernel: ACPI: PM-Timer IO Port: 0x808
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Jul 21 00:42:19 linux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jul 21 00:42:19 linux kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 21 00:42:19 linux kernel: Using ACPI (MADT) for SMP configuration information
    Jul 21 00:42:19 linux kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000
    Jul 21 00:42:19 linux kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
    Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Jul 21 00:42:19 linux kernel: Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
    Jul 21 00:42:19 linux kernel: Booting paravirtualized kernel on bare hardware
    Jul 21 00:42:19 linux kernel: setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    Jul 21 00:42:19 linux kernel: PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u524288
    Jul 21 00:42:19 linux kernel: pcpu-alloc: s88232 r8192 d22360 u524288 alloc=1*2097152
    Jul 21 00:42:19 linux kernel: pcpu-alloc: [0] 0 1 2 3
    Jul 21 00:42:19 linux kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031311
    Jul 21 00:42:19 linux kernel: Kernel command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    Jul 21 00:42:19 linux kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jul 21 00:42:19 linux kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jul 21 00:42:19 linux kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jul 21 00:42:19 linux kernel: Checking aperture...
    Jul 21 00:42:19 linux kernel: No AGP bridge found
    Jul 21 00:42:19 linux kernel: Subtract (57 early reservations)
    Jul 21 00:42:19 linux kernel: #1 [0001000000 - 00016e1178] TEXT DATA BSS
    Jul 21 00:42:19 linux kernel: #2 [0037cb2000 - 0037ff0000] RAMDISK
    Jul 21 00:42:19 linux kernel: #3 [00016e2000 - 00016e2278] BRK
    Jul 21 00:42:19 linux kernel: #4 [00000ff790 - 0000100000] BIOS reserved
    Jul 21 00:42:19 linux kernel: #5 [00000ff780 - 00000ff790] MP-table mpf
    Jul 21 00:42:19 linux kernel: #6 [000009fc00 - 00000f1530] BIOS reserved
    Jul 21 00:42:19 linux kernel: #7 [00000f169c - 00000ff780] BIOS reserved
    Jul 21 00:42:19 linux kernel: #8 [00000f1530 - 00000f169c] MP-table mpc
    Jul 21 00:42:19 linux kernel: #9 [0000010000 - 0000012000] TRAMPOLINE
    Jul 21 00:42:19 linux kernel: #10 [0000012000 - 0000016000] ACPI WAKEUP
    Jul 21 00:42:19 linux kernel: #11 [0000016000 - 000001a000] PGTABLE
    Jul 21 00:42:19 linux kernel: #12 [000001a000 - 000001b000] PGTABLE
    Jul 21 00:42:19 linux kernel: #13 [00016e2280 - 00016e3280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #14 [000001b000 - 000001b200] BOOTMEM
    Jul 21 00:42:19 linux kernel: #15 [0001ee4000 - 0001ee5000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #16 [0001ee5000 - 0001ee6000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #17 [0002000000 - 0005a00000] MEMMAP 0
    Jul 21 00:42:19 linux kernel: #18 [00016e3280 - 00016fb280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #19 [00016fb280 - 0001713280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #20 [0001713280 - 000172b280] BOOTMEM
    Jul 21 00:42:19 linux kernel: #21 [000172c000 - 000172d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #22 [00016e1180 - 00016e11c1] BOOTMEM
    Jul 21 00:42:19 linux kernel: #23 [00016e1200 - 00016e1243] BOOTMEM
    Jul 21 00:42:19 linux kernel: #24 [00016e1280 - 00016e14e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #25 [00016e1500 - 00016e1568] BOOTMEM
    Jul 21 00:42:19 linux kernel: #26 [00016e1580 - 00016e15e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #27 [00016e1600 - 00016e1668] BOOTMEM
    Jul 21 00:42:19 linux kernel: #28 [00016e1680 - 00016e16e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #29 [00016e1700 - 00016e1768] BOOTMEM
    Jul 21 00:42:19 linux kernel: #30 [00016e1780 - 00016e17e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #31 [00016e1800 - 00016e1868] BOOTMEM
    Jul 21 00:42:19 linux kernel: #32 [00016e1880 - 00016e18e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #33 [00016e1900 - 00016e1968] BOOTMEM
    Jul 21 00:42:19 linux kernel: #34 [00016e1980 - 00016e19e8] BOOTMEM
    Jul 21 00:42:19 linux kernel: #35 [00016e1a00 - 00016e1a20] BOOTMEM
    Jul 21 00:42:19 linux kernel: #36 [00016e1a40 - 00016e1a60] BOOTMEM
    Jul 21 00:42:19 linux kernel: #37 [00016e1a80 - 00016e1aba] BOOTMEM
    Jul 21 00:42:19 linux kernel: #38 [00016e1ac0 - 00016e1afa] BOOTMEM
    Jul 21 00:42:19 linux kernel: #39 [0001800000 - 000181d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #40 [0001880000 - 000189d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #41 [0001900000 - 000191d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #42 [0001980000 - 000199d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #43 [00016e1b00 - 00016e1b08] BOOTMEM
    Jul 21 00:42:19 linux kernel: #44 [00016e1b40 - 00016e1b48] BOOTMEM
    Jul 21 00:42:19 linux kernel: #45 [00016e1b80 - 00016e1b90] BOOTMEM
    Jul 21 00:42:19 linux kernel: #46 [00016e1bc0 - 00016e1be0] BOOTMEM
    Jul 21 00:42:19 linux kernel: #47 [00016e1c00 - 00016e1d30] BOOTMEM
    Jul 21 00:42:19 linux kernel: #48 [00016e1d40 - 00016e1d90] BOOTMEM
    Jul 21 00:42:19 linux kernel: #49 [00016e1dc0 - 00016e1e10] BOOTMEM
    Jul 21 00:42:19 linux kernel: #50 [000172d000 - 0001735000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #51 [000199d000 - 0001d9d000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #52 [0005a00000 - 0005c00000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #53 [0005c00000 - 0009c00000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #54 [0001735000 - 0001755000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #55 [0001755000 - 0001795000] BOOTMEM
    Jul 21 00:42:19 linux kernel: #56 [000001ba00 - 0000023a00] BOOTMEM
    Jul 21 00:42:19 linux kernel: Memory: 4050632k/4980736k available (3484k kernel code, 787396k absent, 142708k reserved, 1796k data, 480k init)
    Jul 21 00:42:19 linux kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jul 21 00:42:19 linux kernel: Hierarchical RCU implementation.
    Jul 21 00:42:19 linux kernel: NR_IRQS:768
    Jul 21 00:42:19 linux kernel: Console: colour VGA+ 80x25
    Jul 21 00:42:19 linux kernel: console [tty0] enabled
    Jul 21 00:42:19 linux kernel: allocated 41943040 bytes of page_cgroup
    Jul 21 00:42:19 linux kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jul 21 00:42:19 linux kernel: Fast TSC calibration using PIT
    Jul 21 00:42:19 linux kernel: Detected 3005.707 MHz processor.
    Jul 21 00:42:19 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.88 BogoMIPS (lpj=10019023)
    Jul 21 00:42:19 linux kernel: Security Framework initialized
    Jul 21 00:42:19 linux kernel: Mount-cache hash table entries: 256
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys ns
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuacct
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys memory
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys devices
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys freezer
    Jul 21 00:42:19 linux kernel: Initializing cgroup subsys net_cls
    Jul 21 00:42:19 linux kernel: CPU: Physical Processor ID: 0
    Jul 21 00:42:19 linux kernel: CPU: Processor Core ID: 0
    Jul 21 00:42:19 linux kernel: mce: CPU supports 6 MCE banks
    Jul 21 00:42:19 linux kernel: CPU0: Thermal monitoring enabled (TM2)
    Jul 21 00:42:19 linux kernel: using mwait in idle threads.
    Jul 21 00:42:19 linux kernel: Performance Events: Core2 events, Intel PMU driver.
    Jul 21 00:42:19 linux kernel: ... version: 2
    Jul 21 00:42:19 linux kernel: ... bit width: 40
    Jul 21 00:42:19 linux kernel: ... generic registers: 2
    Jul 21 00:42:19 linux kernel: ... value mask: 000000ffffffffff
    Jul 21 00:42:19 linux kernel: ... max period: 000000007fffffff
    Jul 21 00:42:19 linux kernel: ... fixed-purpose events: 3
    Jul 21 00:42:19 linux kernel: ... event mask: 0000000700000003
    Jul 21 00:42:19 linux kernel: ACPI: Core revision 20100121
    Jul 21 00:42:19 linux kernel: Setting APIC routing to flat
    Jul 21 00:42:19 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jul 21 00:42:19 linux kernel: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
    Jul 21 00:42:19 linux kernel: Booting Node 0, Processors #1
    Jul 21 00:42:19 linux kernel: Brought up 2 CPUs
    Jul 21 00:42:19 linux kernel: Total of 2 processors activated (12027.40 BogoMIPS).
    Jul 21 00:42:19 linux kernel: devtmpfs: initialized
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 16
    Jul 21 00:42:19 linux kernel: ACPI: bus type pci registered
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 21 00:42:19 linux kernel: PCI: not using MMCONFIG
    Jul 21 00:42:19 linux kernel: PCI: Using configuration type 1 for base access
    Jul 21 00:42:19 linux kernel: bio: create slab <bio-0> at 0
    Jul 21 00:42:19 linux kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
    Jul 21 00:42:19 linux kernel: ACPI: Interpreter enabled
    Jul 21 00:42:19 linux kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Jul 21 00:42:19 linux kernel: ACPI: Using IOAPIC for interrupt routing
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 21 00:42:19 linux kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Jul 21 00:42:19 linux kernel: ACPI: No dock devices found.
    Jul 21 00:42:19 linux kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jul 21 00:42:19 linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
    Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Jul 21 00:42:19 linux kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jul 21 00:42:19 linux kernel: vgaarb: loaded
    Jul 21 00:42:19 linux kernel: PCI: Using ACPI for IRQ routing
    Jul 21 00:42:19 linux kernel: NetLabel: Initializing
    Jul 21 00:42:19 linux kernel: NetLabel: domain hash size = 128
    Jul 21 00:42:19 linux kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jul 21 00:42:19 linux kernel: NetLabel: unlabeled traffic allowed by default
    Jul 21 00:42:19 linux kernel: HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Jul 21 00:42:19 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    Jul 21 00:42:19 linux kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Jul 21 00:42:19 linux kernel: Switching to clocksource tsc
    Jul 21 00:42:19 linux kernel: pnp: PnP ACPI init
    Jul 21 00:42:19 linux kernel: ACPI: bus type pnp registered
    Jul 21 00:42:19 linux kernel: pnp: PnP ACPI: found 14 devices
    Jul 21 00:42:19 linux kernel: ACPI: ACPI bus type pnp unregistered
    Jul 21 00:42:19 linux kernel: system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:06: [io 0x0290-0x0297] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0800-0x087f] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0480-0x04bf] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem disabled]
    Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem pref disabled]
    Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: enabling device (0106 -> 0107)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: enabling device (0106 -> 0107)
    Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 2
    Jul 21 00:42:19 linux kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Jul 21 00:42:19 linux kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    Jul 21 00:42:19 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jul 21 00:42:19 linux kernel: TCP: Hash tables configured (established 262144 bind 65536)
    Jul 21 00:42:19 linux kernel: TCP reno registered
    Jul 21 00:42:19 linux kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jul 21 00:42:19 linux kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 1
    Jul 21 00:42:19 linux kernel: Unpacking initramfs...
    Jul 21 00:42:19 linux kernel: Freeing initrd memory: 3320k freed
    Jul 21 00:42:19 linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Jul 21 00:42:19 linux kernel: Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
    Jul 21 00:42:19 linux kernel: software IO TLB at phys 0x5c00000 - 0x9c00000
    Jul 21 00:42:19 linux kernel: Scanning for low memory corruption every 60 seconds
    Jul 21 00:42:19 linux kernel: audit: initializing netlink socket (disabled)
    Jul 21 00:42:19 linux kernel: type=2000 audit(1279654888.309:1): initialized
    Jul 21 00:42:19 linux kernel: VFS: Disk quotas dquot_6.5.2
    Jul 21 00:42:19 linux kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jul 21 00:42:19 linux kernel: msgmni has been set to 7917
    Jul 21 00:42:19 linux kernel: alg: No test for stdrng (krng)
    Jul 21 00:42:19 linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Jul 21 00:42:19 linux kernel: io scheduler noop registered
    Jul 21 00:42:19 linux kernel: io scheduler deadline registered
    Jul 21 00:42:19 linux kernel: io scheduler cfq registered (default)
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.4:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
    Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
    Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
    Jul 21 00:42:19 linux kernel: Linux agpgart interface v0.103
    Jul 21 00:42:19 linux kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jul 21 00:42:19 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Jul 21 00:42:19 linux kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Jul 21 00:42:19 linux kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    Jul 21 00:42:19 linux kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    Jul 21 00:42:19 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 21 00:42:19 linux kernel: mice: PS/2 mouse device common for all mice
    Jul 21 00:42:19 linux kernel: cpuidle: using governor ladder
    Jul 21 00:42:19 linux kernel: cpuidle: using governor menu
    Jul 21 00:42:19 linux kernel: TCP cubic registered
    Jul 21 00:42:19 linux kernel: NET: Registered protocol family 17
    Jul 21 00:42:19 linux kernel: registered taskstats version 1
    Jul 21 00:42:19 linux kernel: Initalizing network drop monitor service
    Jul 21 00:42:19 linux kernel: Freeing unused kernel memory: 480k freed
    Jul 21 00:42:19 linux kernel: udev: starting version 160
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbfs
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hub
    Jul 21 00:42:19 linux kernel: usbcore: registered new device driver usb
    Jul 21 00:42:19 linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: debug port 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    Jul 21 00:42:19 linux kernel: SCSI subsystem initialized
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jul 21 00:42:19 linux kernel: hub 1-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 1-0:1.0: 6 ports detected
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    Jul 21 00:42:19 linux kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jul 21 00:42:19 linux kernel: hub 2-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 2-0:1.0: 6 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
    Jul 21 00:42:19 linux kernel: hub 3-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 3-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
    Jul 21 00:42:19 linux kernel: hub 4-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 4-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
    Jul 21 00:42:19 linux kernel: hub 5-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 5-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
    Jul 21 00:42:19 linux kernel: hub 6-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 6-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
    Jul 21 00:42:19 linux kernel: hub 7-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 7-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
    Jul 21 00:42:19 linux kernel: hub 8-0:1.0: USB hub found
    Jul 21 00:42:19 linux kernel: hub 8-0:1.0: 2 ports detected
    Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: scsi0 : pata_jmicron
    Jul 21 00:42:19 linux kernel: scsi1 : pata_jmicron
    Jul 21 00:42:19 linux kernel: ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
    Jul 21 00:42:19 linux kernel: ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    Jul 21 00:42:19 linux kernel: scsi2 : ata_piix
    Jul 21 00:42:19 linux kernel: scsi3 : ata_piix
    Jul 21 00:42:19 linux kernel: ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
    Jul 21 00:42:19 linux kernel: ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    Jul 21 00:42:19 linux kernel: scsi4 : ata_piix
    Jul 21 00:42:19 linux kernel: scsi5 : ata_piix
    Jul 21 00:42:19 linux kernel: ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
    Jul 21 00:42:19 linux kernel: ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    Jul 21 00:42:19 linux kernel: scsi6 : ahci
    Jul 21 00:42:19 linux kernel: scsi7 : ahci
    Jul 21 00:42:19 linux kernel: ata7: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
    Jul 21 00:42:19 linux kernel: ata8: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
    Jul 21 00:42:19 linux kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: ata7: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: ata8: SATA link down (SStatus 0 SControl 300)
    Jul 21 00:42:19 linux kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
    Jul 21 00:42:19 linux kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 21 00:42:19 linux kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jul 21 00:42:19 linux kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jul 21 00:42:19 linux kernel: ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
    Jul 21 00:42:19 linux kernel: ata5.00: configured for UDMA/100
    Jul 21 00:42:19 linux kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
    Jul 21 00:42:19 linux kernel: ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 21 00:42:19 linux kernel: ata3.00: configured for UDMA/133
    Jul 21 00:42:19 linux kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    Jul 21 00:42:19 linux kernel: ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 21 00:42:19 linux kernel: ata6.00: configured for UDMA/133
    Jul 21 00:42:19 linux kernel: scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write Protect is off
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 21 00:42:19 linux kernel: sda:
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write Protect is off
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 21 00:42:19 linux kernel: sdb:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Jul 21 00:42:19 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Jul 21 00:42:19 linux kernel: sda1 sda2 < sdb1 sdb2 sdb3 sdb4 < sda5 sdb5 sdb6 sda6 >
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Attached SCSI disk
    Jul 21 00:42:19 linux kernel: sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 >
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hiddev
    Jul 21 00:42:19 linux kernel: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0
    Jul 21 00:42:19 linux kernel: generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.1-1/input0
    Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbhid
    Jul 21 00:42:19 linux kernel: usbhid: USB HID core driver
    Jul 21 00:42:19 linux kernel: usb 8-1: new low speed USB device using uhci_hcd and address 2
    Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0002: input,hidraw1: USB HID v1.10 Keyboard [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input0
    Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0003: input,hidraw2: USB HID v1.10 Device [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input1
    Jul 21 00:42:19 linux kernel: device-mapper: uevent: version 1.0.3
    Jul 21 00:42:19 linux kernel: device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
    Jul 21 00:42:19 linux kernel: Intel AES-NI instructions are not detected.
    Jul 21 00:42:19 linux kernel: padlock: VIA PadLock not detected.
    Jul 21 00:42:19 linux kernel: SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    Jul 21 00:42:19 linux kernel: SGI XFS Quota Management subsystem
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-0
    Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: RTC can wake from S4
    Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    Jul 21 00:42:19 linux kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Jul 21 00:42:19 linux kernel: udev: starting version 160
    Jul 21 00:42:19 linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
    Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRB]
    Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRF]
    Jul 21 00:42:19 linux kernel: iTCO_vendor_support: vendor-support=0
    Jul 21 00:42:19 linux kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Jul 21 00:42:19 linux kernel: iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
    Jul 21 00:42:19 linux kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jul 21 00:42:19 linux kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit pref]
    Jul 21 00:42:19 linux kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 21 00:42:19 linux kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
    Jul 21 00:42:19 linux kernel: sr 4:0:0:0: Attached scsi generic sg1 type 5
    Jul 21 00:42:19 linux kernel: sd 5:0:0:0: Attached scsi generic sg2 type 0
    Jul 21 00:42:19 linux kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
    Jul 21 00:42:19 linux kernel: ne2k-pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Jul 21 00:42:19 linux kernel: eth0: [removed]
    Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: version 2.1.3
    Jul 21 00:42:19 linux kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 21 00:42:19 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Jul 21 00:42:19 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    Jul 21 00:42:19 linux kernel: hda_codec: ALC883: BIOS auto-probing.
    Jul 21 00:42:19 linux kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    Jul 21 00:42:19 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    Jul 21 00:42:19 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012beb8000
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
    Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
    Jul 21 00:42:19 linux kernel: Console: switching to colour frame buffer device 180x56
    Jul 21 00:42:19 linux kernel: fb0: nouveaufb frame buffer device
    Jul 21 00:42:19 linux kernel: registered panic notifier
    Jul 21 00:42:19 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem sdb1
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-1
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-3
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-4
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-2
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-5
    Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-6
    Jul 21 00:42:19 linux kernel: Adding 979928k swap on /dev/mapper/dm_swap. Priority:-1 extents:1 across:979928k
    Jul 21 00:42:19 linux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
    Jul 21 00:42:19 linux kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    Jul 21 00:42:19 linux kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    Jul 21 00:42:19 linux kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    Jul 21 00:42:19 linux kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    Jul 21 00:42:19 linux init: Entering runlevel: 3
    Jul 21 00:43:17 linux shutdown[3617]: shutting down for system reboot
    Jul 21 00:43:18 linux init: Switching to runlevel: 6
    It was very strange for me, because I had no idea about the KMS thing...
    I thought it must be because I haven't installed x86-video-nouveau, so I installed xorg and x86-video-nouveau, un-blacklisted the nouveau module, but the same error happened. I blacklisted it again, booted. Now when trying "modprobe nouveau" in the fully booted system the monitor still goes the same bad way, reboot, here is the log of that try:
    Jul 21 02:19:36 linux kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 21 02:19:36 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
    Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    Jul 21 02:19:37 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    Jul 21 02:19:37 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012adae000
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
    Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
    Jul 21 02:19:37 linux kernel: Console: switching to colour frame buffer device 180x56
    Jul 21 02:19:37 linux kernel: fb0: nouveaufb frame buffer device
    Jul 21 02:19:37 linux kernel: registered panic notifier
    Jul 21 02:19:37 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    I can start xorg with vesa driver now, but would be nice to have nouveau working, here are some config files and other information:
    # cat /boot/grub/menu.lst
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
    initrd /kernel26-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd1,0)
    #makeactive
    #chainloader +1
    # cat /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Paris"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!nouveau)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="arch-linux"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    eth0="eth0 192.168.0.1 netmask 255.255.255.252 broadcast 192.168.0.3"
    eth1="eth1 10.0.1.7 netmask 255.255.255.0 broadcast 10.0.1.255"
    INTERFACES=(!eth0 eth1)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 10.0.1.1"
    ROUTES=(gateway)
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng dbus iptables network netfs crond alsa)
    # pacman -Qs video
    local/libxv 1.0.5-1
    X11 Video extension library
    local/libxxf86vm 1.1.0-1
    X11 XFree86 video mode extension library
    local/videoproto 2.3.0-1
    X11 Video extension wire protocol
    local/xf86-video-nouveau 0.0.16_git20100517-1
    Open Source 3D acceleration driver for nVidia cards (experimental)
    local/xf86-video-vesa 2.3.0-2 (xorg xorg-video-drivers)
    X.org vesa video driver
    local/xf86vidmodeproto 2.3-1
    X11 Video Mode extension wire protocol
    I think the problem is in "TMDS table revision 2.0 not currently supported", I just found that issue in http://nouveau.freedesktop.org/wiki/TroubleShooting.
    As I can understand, there is no more nouveau-drm (I could find one only for LTS kernel) package (to try to update from AUR) and it is injected in the mainline kernel? What can I do now?
    Thank you.
    Last edited by arch_archer (2010-07-21 17:37:38)

    Ooops, I must have accidentally clicked 'Submit' - I didn't mean to post it.
    Try using some more nouveau goodness. I have no idea why nouveau-drm is unavailable atm - it was here yesterday ...
    http://arm.kh.nu/search/index.php?a=32& … ommunity=1 <- this is for 32-bit
    Last edited by karol (2010-07-21 00:01:30)

  • Dual boot: Arch and another Linux (GRUB issue)

    Hi, everybody,
    I've got two SATA hard drives: sda and sdb. There is a Linux on sdb, and the GRUB in it's MBR. Here's /boot/grub/menu.lst (sdb):
    timeout 10
    color black/cyan yellow/cyan
    gfxmenu (hd0,0)/usr/share/gfxboot/themes/pclinuxos/boot/message
    default 0
    title linux 2.6.22.15.tex2
    kernel (hd0,0)/boot/vmlinuz-2.6.22.15.tex2 BOOT_IMAGE=2.6.22.15.tex2 root=/dev/sdb1 acpi=on resume=/dev/sdb2 splash=silent vga=788
    initrd (hd0,0)/boot/initrd-2.6.22.15.tex2.img
    title linux old kernel
    kernel (hd0,0)/boot/vmlinuz BOOT_IMAGE=linux root=/dev/sdb1 acpi=on resume=/dev/sdb2 splash=silent vga=788
    initrd (hd0,0)/boot/initrd.img
    title linux-nonfb
    kernel (hd0,0)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=/dev/sdb1 acpi=on resume=/dev/sdb2
    initrd (hd0,0)/boot/initrd.img
    title failsafe
    kernel (hd0,0)/boot/vmlinuz BOOT_IMAGE=failsafe root=/dev/sdb1 failsafe acpi=on resume=/dev/sdb2
    initrd (hd0,0)/boot/initrd.img
    title Arch Linux
    root (hd1,4)
    kernel /boot/vmlinuz26 root=/dev/sda5 ro
    initrd /boot/kernel26.img
    chainloader +1
    #title FreeBSD
    #rootnoverify (hd1,0,a)
    #kernel /boot/loader
    #chainloader +1
    #title windows
    #root (hd1,0)
    #makeactive
    #chainloader +1
    The Arch entry won't work: GRUB Error 13: - something wrong with the kernel image...
    I tried to install the Arch's own GRUB into the sda MBR; now Arch is booting successfully from it's own GRUB - provided the sda is first in the BIOS boot order. Now I have to change the BIOS boot order depending on what system I want to boot, which is less then a satisfactory arrangement .
    /boot/grub/menu.lst (sda, Arch's own):
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/hda (hd0)
    # /dev/hdb2 (hd1,1)
    # /dev/hda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,4)
    kernel /boot/vmlinuz26 root=/dev/sda5 ro
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,4)
    kernel /boot/vmlinuz26 root=/dev/sda5 ro
    initrd /boot/kernel26-fallback.img
    # (1) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    I'd be happy to boot into Arch from sdb; what am I to change in the /boot/grub/menu.lst (sdb)?

    See this for chainloading to another MBR:
    http://www.gnu.org/software/grub/manual … 02fWindows
    OK right.
    PCLOS grub=MBR of sdb (hd1)
    ARCH grub=MBR of sda (hd0)
    You'll want something like this in PCLOS grub:
    title Arch Linux
    unhide (hd0)
    hide (hd1)
    rootnoverify (hd0)
    chainloader +1
    makeactive
    If that doesn't work then its just a case of swapping the ones and zeroes around (i hope).
    Then something like this in arch grub (as long as the kernel is in the fifth partition of the first hard drive). Typo first time round, (hd1,4) should be (hd0,4):
    # (0) Arch Linux
    title Arch Linux
    root (hd0,4)
    kernel /boot/vmlinuz26 root=/dev/sda5 ro
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,4)
    kernel /boot/vmlinuz26 root=/dev/sda5 ro
    initrd /boot/kernel26-fallback.img
    Last edited by dyscoria (2008-04-07 11:07:17)

  • Error 15 file not found.

    I was able to install arch linux on a 2 GB flash drive. But I cannot boot into arch linux from the grub menu. I greeted by a message like "error 15 file not found"
    my menu.lst file looks like
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd1,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd1,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    /etc/fstab file looks like
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    tmpfs /tmp tmpfs nodev,nosuid 0 0
    #UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
    #UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
    #UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
    #UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
    UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
    UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
    UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
    UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
    and result of #blikd is
    /dev/sda1: UUID="edc30674-5e24-46ae-865c-647b5af6a1ca" TYPE="ext4"
    /dev/sda5: UUID="8045e664-17ad-4bfd-8b5e-56d7f17fbcdd" TYPE="swap"
    /dev/sdb1: UUID="aae9fb61-b5ec-40b5-a3dd-232c9a77f29b" TYPE="ext2"
    /dev/sdb2: UUID="15eb5a8a-dddc-4b28-8183-f81d450b78d5" TYPE="swap"
    /dev/sdb3: UUID="9157e8a3-c1bd-499a-95fe-524cd9c07d0e" TYPE="ext3"
    /dev/sdb4: UUID="f1a9a9ad-8344-4eb5-be91-1af155c756e4" TYPE="ext3"

    Here is the result of my  fdisk -l /dev/sdb
    Device Boot Start End Blocks Id System
    /dev/sdb1 * 1 100 102384 83 Linux
    /dev/sdb2 101 356 262144 82 Linux swap / Solaris
    /dev/sdb3 357 1533 1205248 83 Linux
    /dev/sdb4 1534 1926 402432 83 Linux
    Last edited by manish411 (2012-01-14 05:24:14)

  • Nouveu_XFCE4_Strange problems with screen resolution

    Hallo to all the people out here!!!
    I'm quite new to linux. I've been using Ubuntu and Mint for sometime but I decided to switch to Arch, since I decided to have more control over my machines. Before I go on I must clear out that most of those machines are build from old spare items.
    in the current machine I'm using nouveau driver with a xfce4 desktop, but I'm unable to set the resolution 1280x1024 to work properly, which I'm almost sure that my screen is capable of.
    I managed to set the resolution to 1280x1024 after I manually added new xrandr mode, but there were various strange problems:
    1. Windows or panels that were at the bottom of the screen tend to disappear?!
    2. In the log in screen (I'm using SLIM)can not see what I type
    More than this:
    The screen changes resolution during boot
    There's a strange sound like flick of a switch every time the resolution changes
    I've searched for similar problems but found nothing close to mine, and get more and more confused and i think i'm gonna mess everything up...
    Thanx in advance for the help!
    These outputs I think that will be useful :
    uname -a
    Linux archbox 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686 Intel(R) Celeron(R) CPU 2.80GHz GenuineIntel GNU/Linux
    lspci | grep VGA
    01:00.0 VGA compatible controller: NVIDIA Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA controller])
    lsmod
    Module Size Used by
    fuse 59348 2
    firewire_ohci 27283 0
    firewire_core 44257 1 firewire_ohci
    8139too 17280 0
    8139cp 16043 0
    snd_intel8x0 22672 0
    ppdev 4750 0
    crc_itu_t 1095 1 firewire_core
    mii 3439 2 8139cp,8139too
    snd_ac97_codec 89900 1 snd_intel8x0
    parport_pc 26601 0
    iTCO_wdt 10773 0
    ac97_bus 874 1 snd_ac97_codec
    shpchp 22557 0
    iTCO_vendor_support 1545 1 iTCO_wdt
    snd_pcm 60499 2 snd_ac97_codec,snd_intel8x0
    snd_page_alloc 5901 2 snd_pcm,snd_intel8x0
    snd_timer 15158 1 snd_pcm
    snd 45013 4 snd_timer,snd_pcm,snd_ac97_codec,snd_intel8x0
    floppy 49063 0
    thermal 6563 0
    fan 1902 0
    soundcore 4986 1 snd
    pcspkr 1423 0
    i2c_i801 6992 0
    parport 26479 2 parport_pc,ppdev
    intel_agp 8688 1
    processor 23476 0
    pci_hotplug 21878 1 shpchp
    intel_gtt 11193 1 intel_agp
    evdev 7310 5
    ext4 385004 3
    crc16 1091 1 ext4
    jbd2 60590 1 ext4
    mbcache 4345 1 ext4
    usbhid 31477 0
    hid 66633 1 usbhid
    sr_mod 13148 0
    cdrom 30504 1 sr_mod
    sd_mod 25867 5
    pata_acpi 2388 0
    ata_generic 2391 0
    ata_piix 18616 4
    libata 145775 3 ata_piix,ata_generic,pata_acpi
    scsi_mod 112765 3 libata,sd_mod,sr_mod
    uhci_hcd 19712 0
    ehci_hcd 38480 0
    usbcore 122719 4 ehci_hcd,uhci_hcd,usbhid
    usb_common 622 1 usbcore
    nouveau 700360 2
    button 3614 1 nouveau
    video 9819 1 nouveau
    mxm_wmi 1101 1 nouveau
    wmi 7259 2 mxm_wmi,nouveau
    drm_kms_helper 23303 1 nouveau
    ttm 46603 1 nouveau
    drm 166804 4 ttm,drm_kms_helper,nouveau
    agpgart 22159 4 drm,ttm,intel_gtt,intel_agp
    i2c_core 16845 4 drm,drm_kms_helper,nouveau,i2c_i801
    my screen configuration placed in /etc/X11/xorg.conf.d/20-mntrstp.conf
    Section "Monitor"
    Identifier "Monitor0"
    # Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
    # Option "PreferredMode" "1280x1024_60.00"
    EndSection
    Section "Device"
    Identifier "Nvidia card"
    Driver "nouveau"
    EndSection
    Section "Screen"
    Identifier "Screen0" #Collapse Monitor and Device section to Screen section
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24 #Choose the depth (16||24)
    SubSection "Display"
    Depth 24
    Modes "1280x1024_60.00" "1024x768" "640x480" #Choose the resolution
    EndSubSection
    EndSection
    xrandr
    Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
    VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1024x768 60.0*
    800x600 60.3 56.2
    848x480 60.0
    640x480 59.9
    DVI-I-1 disconnected (normal left inverted right x axis y axis)
    TV-1 disconnected (normal left inverted right x axis y axis)

    OK I just renamed my configuration file from 20-mntrstp.conf to 20-nouveau.conf
    (I thought that the number 20 was the important part not the name itself)but nothing's changed.
    I can't find any /boot/grub/grub.cfg file in my system!!!Do I have to create one manually?
    And my menu.lst looks like this:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/4950a9db-cefe-4b24-a523-fbb375d5b6e3 ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/4950a9db-cefe-4b24-a523-fbb375d5b6e3 ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    Yes I've followed the wiki, but I'm not sure if i messed up anything as i was trying to solve the problem. Also I'm not a very experienced Linux user so a lot of things are made without necessarily understanding the whole of them.

  • Problems with Grub, Dualbooting, and a software raid

    Been searching through google and any forums i could find regarding a possible fix and can not find anything that works.
    I have 2 Hard drives, First one is windows, second one is Archlinux.  They are setup through a software raid and i can not get grub to see them.
    The error i Get is
    Step 1.5 complete
    Loading Grub Please Wait..
    Error 21
    I've used the supergrub disk to no avail.  (i had to load that onto a usb drive due to it not working on my usb cd drive)
    my setup is SDA = windows drive
    SDB = Archlinux
    sdb1 = /               (100gb)
    sdb2 = /home       (190gb)
    sdb3 = swap         (6gb)
    I've checked (and will post when i get back on other computer to try again) the menu.lst,
    last time i checked that it looked to me like the sdb0 and sdb1 were not in there
    so i added them, pretty sure it at least needed sdb1
    (found it was on sdb1 by loading a live linux and using grub>find /boot/grub/stage1 to verify)
    i've tried changing the settings of my raid in the bios, i have 3 options, Disabled (at which point i don't get any grub error messages just a non system disk error)
    Raid - not how i normally run but tried it, no change (still error 21)
    and IDE - how it normally runs, unsuccessfully
    I'd really appreciate some help on this and thank you.

    Here is the Menu.lst in /boot/grub
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sda1 (hd0,0)
    # /dev/sdb (hd1)
    # /dev/sdb1 (hd1,0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd1,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/0e70c4ce-e3b3-42f8-8c2b-6c6414e$
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd1,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/0e70c4ce-e3b3-42f8-8c2b-6c6414e$
    initrd /boot/kernel26-fallback.img
    # (2) Windows
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    and here is Device. map
    (fd0) /dev/fd0
    (hd0) /dev/sda
    (hd1) /dev/sdb
    some more info from grub
    grub> find /boot/grub/stage1
    (hd1,0)
    Last edited by m3lkor (2009-03-15 19:14:07)

  • I need equivalent FB setting for kernel26archck

    What is the equivalent to vga=773 in kernel26archck. Below is my current grub menu.lst:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/hda (hd0)
    # /dev/hdb2 (hd1,1)
    # /dev/hda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Windows XP
    title Windows XP [ Loader ]
    root (hd0,1)
    makeactive
    chainloader +1
    # (1) Arch Linux
    title Arch Linux [ Stock Kernel ]
    root (hd1,0)
    kernel /boot/vmlinuz26 root=/dev/hdb1 ro vga=773
    initrd /boot/initrd26.img
    # (2) Arch Linux
    title Arch Linux [ Archck Kernel ]
    root (hd1,0)
    kernel /boot/vmlinuz26archck root=/dev/hdb1 vesa=vesafb:ywrap,mtrr,1024x768-32@70 splash=verbose,theme:darch console=tty1
    initrd /boot/initramfs-2.6.15-archck.img
    It doesn't work and i still get those big ass fonts.

    The option is
    video=vesafb:ywrap,mtrr,1024x768-32@70
    not vesa=

  • [SOLVED] Once screen goes blank there's no turning back

    Hello.
    If I let the screensaver to blank my screen, I can't wake it up. The screen doesn't turn off, it just stays blank.
    I tried pressing Ctrl + Alt + Backspace, changing to a console with Ctrl + Alt + F1, F2, etc but nothing. I have to power off the laptop or reboot it.
    If I lock the screen with Ctrl + Alt + l I get the same result.
    I'm not sure what info would you need to diagnose this. Any ideas?
    Dell XPS 15
    Gnome-shell 3.2
    Last edited by martin_legion (2012-04-30 14:36:59)

    I think ACPI is not the issue here. I did go into bios to check, but I don't have any options related to ACPI (HP bios )
    here is my dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.1.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Tue Nov 29 08:55:45 CET 2011
    [ 0.000000] Command line: root=/dev/sda7 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000befc2000 (usable)
    [ 0.000000] BIOS-e820: 00000000befc2000 - 00000000bf6c2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf6c2000 - 00000000bf7c2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf7c2000 - 00000000bf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed19000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8440p (VQ659EA#AB8)/172B, BIOS 68CCU Ver. F.20 09/05/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 base 138000000 mask FF8000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
    [ 0.000000] 0000000000 - 00bf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
    [ 0.000000] 0100000000 - 0138000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 138000000 @ befbc000-befc2000
    [ 0.000000] RAMDISK: 37d9c000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fc600 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 00000000bf7fe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
    [ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 172B 0000000F HP 00000001)
    [ 0.000000] ACPI: DSDT 00000000bf7d6000 203A2 (v02 HPQOEM 172B 00000001 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000bf760000 00040
    [ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 172B 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7d3000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7d2000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
    [ 0.000000] ACPI: SLIC 00000000bf7d1000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: DMAR 00000000bf7d0000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7cf000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7ce000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7cd000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
    [ 0.000000] ACPI: ASF! 00000000bf7f8000 000A0 (v32 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000138000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
    [ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00138000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[4] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000befc2
    [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
    [ 0.000000] 0: 0x00100000 -> 0x00138000
    [ 0.000000] On node 0 totalpages: 1011538
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 761859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3584 pages used for memmap
    [ 0.000000] Normal zone: 225792 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000befc2000 - 00000000bf6c2000
    [ 0.000000] PM: Registered nosave memory: 00000000bf6c2000 - 00000000bf7c2000
    [ 0.000000] PM: Registered nosave memory: 00000000bf7c2000 - 00000000bf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
    [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
    [ 0.000000] PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80448 r8192 d21952 u262144
    [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 991565
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda7 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3901576k/5111808k available (4156k kernel code, 1065656k absent, 144576k reserved, 5288k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2526.853 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.27 BogoMIPS (lpj=8422843)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000093] Security Framework initialized
    [ 0.000098] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000397] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001338] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001737] Mount-cache hash table entries: 256
    [ 0.002070] Initializing cgroup subsys cpuacct
    [ 0.002096] Initializing cgroup subsys memory
    [ 0.002109] Initializing cgroup subsys devices
    [ 0.002111] Initializing cgroup subsys freezer
    [ 0.002113] Initializing cgroup subsys net_cls
    [ 0.002114] Initializing cgroup subsys blkio
    [ 0.002154] CPU: Physical Processor ID: 0
    [ 0.002156] CPU: Processor Core ID: 0
    [ 0.002161] mce: CPU supports 9 MCE banks
    [ 0.002171] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002178] using mwait in idle threads.
    [ 0.003042] ACPI: Core revision 20110623
    [ 0.030575] ftrace: allocating 16313 entries in 64 pages
    [ 0.035109] DMAR: Host address width 36
    [ 0.035111] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.035116] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
    [ 0.035118] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
    [ 0.035123] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
    [ 0.035124] DMAR: RMRR base: 0x00000000000000 end: 0x00000000000fff
    [ 0.035126] DMAR: No ATSR found
    [ 0.035646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068630] CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 02
    [ 0.173987] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.173992] ... version: 3
    [ 0.173993] ... bit width: 48
    [ 0.173994] ... generic registers: 4
    [ 0.173996] ... value mask: 0000ffffffffffff
    [ 0.173997] ... max period: 000000007fffffff
    [ 0.173998] ... fixed-purpose events: 3
    [ 0.173999] ... event mask: 000000070000000f
    [ 0.194356] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.220645] Booting Node 0, Processors #1
    [ 0.220650] smpboot cpu 1: start_ip = 9a000
    [ 0.334067] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.353922] #2
    [ 0.353925] smpboot cpu 2: start_ip = 9a000
    [ 0.467273] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.487176] #3
    [ 0.487179] smpboot cpu 3: start_ip = 9a000
    [ 0.600527] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.607084] Brought up 4 CPUs
    [ 0.607088] Total of 4 processors activated (20223.92 BogoMIPS).
    [ 0.609380] devtmpfs: initialized
    [ 0.610261] PM: Registering ACPI NVS region at bf6c2000 (1048576 bytes)
    [ 0.611018] print_constraints: dummy:
    [ 0.611086] NET: Registered protocol family 16
    [ 0.611174] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.611177] ACPI: bus type pci registered
    [ 0.611305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.611308] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.641782] PCI: Using configuration type 1 for base access
    [ 0.642196] bio: create slab <bio-0> at 0
    [ 0.642292] ACPI: Added _OSI(Module Device)
    [ 0.642294] ACPI: Added _OSI(Processor Device)
    [ 0.642295] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.642297] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.643782] ACPI: EC: Look up EC in DSDT
    [ 0.646017] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.660446] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.685927] ACPI: SSDT 00000000bf6bb918 0043B (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.686277] ACPI: Dynamic OEM Table Load:
    [ 0.686279] ACPI: SSDT (null) 0043B (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.686397] ACPI: SSDT 00000000bf6b9018 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.686733] ACPI: Dynamic OEM Table Load:
    [ 0.686735] ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.707261] ACPI: SSDT 00000000bf6baa98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.707645] ACPI: Dynamic OEM Table Load:
    [ 0.707648] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.717152] ACPI: SSDT 00000000bf6b8d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.717510] ACPI: Dynamic OEM Table Load:
    [ 0.717512] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 1.155007] ACPI: Interpreter enabled
    [ 1.155011] ACPI: (supports S0 S3 S4 S5)
    [ 1.155029] ACPI: Using IOAPIC for interrupt routing
    [ 1.156431] ACPI: Power Resource [APPR] (off)
    [ 1.167432] ACPI: Power Resource [LPP] (on)
    [ 1.169731] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.169896] ACPI: No dock devices found.
    [ 1.169897] HEST: Table not found.
    [ 1.169900] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.170526] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.171056] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.171058] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.171060] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.171063] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 1.171064] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
    [ 1.171066] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 1.171077] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.171094] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.171109] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.171132] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.171134] pci 0000:00:01.0: PME# disabled
    [ 1.171179] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.171208] pci 0000:00:16.0: reg 10: [mem 0xd7424000-0xd742400f 64bit]
    [ 1.171281] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.171285] pci 0000:00:16.0: PME# disabled
    [ 1.171311] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
    [ 1.171333] pci 0000:00:16.3: reg 10: [io 0x6050-0x6057]
    [ 1.171344] pci 0000:00:16.3: reg 14: [mem 0xd742b000-0xd742bfff]
    [ 1.171454] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
    [ 1.171478] pci 0000:00:19.0: reg 10: [mem 0xd7400000-0xd741ffff]
    [ 1.171489] pci 0000:00:19.0: reg 14: [mem 0xd742a000-0xd742afff]
    [ 1.171500] pci 0000:00:19.0: reg 18: [io 0x6020-0x603f]
    [ 1.171568] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.171572] pci 0000:00:19.0: PME# disabled
    [ 1.171601] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.171625] pci 0000:00:1a.0: reg 10: [mem 0xd7429000-0xd74293ff]
    [ 1.171714] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.171718] pci 0000:00:1a.0: PME# disabled
    [ 1.171748] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.171767] pci 0000:00:1b.0: reg 10: [mem 0xd7420000-0xd7423fff 64bit]
    [ 1.171840] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.171845] pci 0000:00:1b.0: PME# disabled
    [ 1.171870] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.171947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.171952] pci 0000:00:1c.0: PME# disabled
    [ 1.171981] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.172056] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.172061] pci 0000:00:1c.1: PME# disabled
    [ 1.172091] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
    [ 1.172167] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.172171] pci 0000:00:1c.3: PME# disabled
    [ 1.172209] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.172233] pci 0000:00:1d.0: reg 10: [mem 0xd7428000-0xd74283ff]
    [ 1.172320] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.172324] pci 0000:00:1d.0: PME# disabled
    [ 1.172348] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.172421] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
    [ 1.172538] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
    [ 1.172564] pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f]
    [ 1.172575] pci 0000:00:1f.2: reg 14: [io 0x605c-0x605f]
    [ 1.172585] pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047]
    [ 1.172596] pci 0000:00:1f.2: reg 1c: [io 0x6058-0x605b]
    [ 1.172606] pci 0000:00:1f.2: reg 20: [io 0x6000-0x601f]
    [ 1.172617] pci 0000:00:1f.2: reg 24: [mem 0xd7427000-0xd74277ff]
    [ 1.172663] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.172667] pci 0000:00:1f.2: PME# disabled
    [ 1.172700] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
    [ 1.172726] pci 0000:00:1f.6: reg 10: [mem 0xd7426000-0xd7426fff 64bit]
    [ 1.172841] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
    [ 1.172852] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    [ 1.172865] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.172878] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 1.172887] pci 0000:01:00.0: reg 24: [io 0x5000-0x507f]
    [ 1.172896] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 1.172951] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 1.172963] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
    [ 1.173053] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.173055] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 1.173057] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
    [ 1.173061] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.173114] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.173121] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
    [ 1.173180] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    [ 1.173184] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 1.173188] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
    [ 1.173312] pci 0000:44:00.0: [8086:4239] type 0 class 0x000280
    [ 1.173371] pci 0000:44:00.0: reg 10: [mem 0xd3200000-0xd3201fff 64bit]
    [ 1.173568] pci 0000:44:00.0: PME# supported from D0 D3hot D3cold
    [ 1.173595] pci 0000:44:00.0: PME# disabled
    [ 1.173667] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    [ 1.173674] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
    [ 1.173727] pci 0000:45:06.0: [1180:0832] type 0 class 0x000c00
    [ 1.173741] pci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 1.173742] pci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
    [ 1.173756] pci 0000:45:06.0: reg 10: [mem 0xd3101000-0xd31017ff]
    [ 1.173831] pci 0000:45:06.0: supports D1 D2
    [ 1.173832] pci 0000:45:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.173837] pci 0000:45:06.0: PME# disabled
    [ 1.173855] pci 0000:45:06.1: [1180:0822] type 0 class 0x000805
    [ 1.173875] pci 0000:45:06.1: reg 10: [mem 0xd3103000-0xd31030ff]
    [ 1.173949] pci 0000:45:06.1: supports D1 D2
    [ 1.173951] pci 0000:45:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.173955] pci 0000:45:06.1: PME# disabled
    [ 1.173973] pci 0000:45:06.2: [1180:0476] type 2 class 0x000607
    [ 1.173992] pci 0000:45:06.2: reg 10: [mem 0xd3100000-0xd3100fff]
    [ 1.174013] pci 0000:45:06.2: supports D1 D2
    [ 1.174015] pci 0000:45:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.174019] pci 0000:45:06.2: PME# disabled
    [ 1.174065] pci 0000:00:1e.0: PCI bridge to [bus 45-46] (subtractive decode)
    [ 1.174070] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
    [ 1.174074] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
    [ 1.174082] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.174084] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.174085] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.174087] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 1.174089] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
    [ 1.174091] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
    [ 1.174130] pci_bus 0000:46: [bus 46-49] partially hidden behind transparent bridge 0000:45 [bus 45-46]
    [ 1.174160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.174327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.174368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 1.174408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.174433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.174476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.174831] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.175725] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 1.180484] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 1.180539] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.180555] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.180572] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.180588] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.180602] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.180616] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.180642] pci0000:ff: Requesting ACPI _OSC control (0x1d)
    [ 1.180644] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.180645] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.180822] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180858] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.180892] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180925] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.180961] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180995] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.181031] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.181066] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.181158] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.181163] vgaarb: loaded
    [ 1.181164] vgaarb: bridge control possible 0000:01:00.0
    [ 1.181225] PCI: Using ACPI for IRQ routing
    [ 1.191028] PCI: pci_cache_line_size set to 64 bytes
    [ 1.191111] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 1.191113] reserve RAM buffer: 00000000befc2000 - 00000000bfffffff
    [ 1.191115] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
    [ 1.191218] NetLabel: Initializing
    [ 1.191220] NetLabel: domain hash size = 128
    [ 1.191221] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.191232] NetLabel: unlabeled traffic allowed by default
    [ 1.191253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.191258] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.193274] Switching to clocksource hpet
    [ 1.193423] Switched to NOHz mode on CPU #0
    [ 1.193521] Switched to NOHz mode on CPU #3
    [ 1.193528] Switched to NOHz mode on CPU #2
    [ 1.193577] Switched to NOHz mode on CPU #1
    [ 1.197862] pnp: PnP ACPI init
    [ 1.197878] ACPI: bus type pnp registered
    [ 1.198201] pnp 00:00: [bus 00-fe]
    [ 1.198204] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.198206] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.198207] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.198209] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.198210] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.198212] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.198213] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.198215] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.198218] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.198220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.198221] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.198223] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.198224] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.198226] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.198227] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.198229] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.198230] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.198232] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 1.198233] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
    [ 1.198235] pnp 00:00: [mem 0xfee01000-0xffffffff window]
    [ 1.198323] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.198487] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 1.198489] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 1.198490] pnp 00:01: [mem 0xfed1b000-0xfed1bfff]
    [ 1.198492] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 1.198493] pnp 00:01: [mem 0xd7500000-0xd7500fff]
    [ 1.198494] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 1.198496] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 1.198497] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [ 1.198498] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 1.198500] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 1.198548] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.198550] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.198552] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 1.198554] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.198556] system 00:01: [mem 0xd7500000-0xd7500fff] has been reserved
    [ 1.198558] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.198560] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.198562] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.198564] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.198566] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 1.198568] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.198632] pnp 00:02: [io 0x0000-0x001f]
    [ 1.198633] pnp 00:02: [io 0x0081-0x0091]
    [ 1.198635] pnp 00:02: [io 0x0093-0x009f]
    [ 1.198636] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.198638] pnp 00:02: [dma 4]
    [ 1.198662] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.198668] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.198693] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.198733] pnp 00:04: [io 0xfe00-0xfe0f]
    [ 1.198734] pnp 00:04: [io 0xfe80-0xfe8f]
    [ 1.198736] pnp 00:04: [mem 0xfed40000-0xfed44fff]
    [ 1.198765] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 1.198827] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 1.198853] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.198860] pnp 00:06: [io 0x00f0]
    [ 1.198870] pnp 00:06: [irq 13]
    [ 1.198894] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.198902] pnp 00:07: [io 0x002e-0x002f]
    [ 1.198903] pnp 00:07: [io 0x004e-0x004f]
    [ 1.198905] pnp 00:07: [io 0x0061]
    [ 1.198906] pnp 00:07: [io 0x0063]
    [ 1.198907] pnp 00:07: [io 0x0065]
    [ 1.198908] pnp 00:07: [io 0x0067]
    [ 1.198909] pnp 00:07: [io 0x0070]
    [ 1.198911] pnp 00:07: [io 0x0080]
    [ 1.198913] pnp 00:07: [io 0x0092]
    [ 1.198915] pnp 00:07: [io 0x00b2-0x00b3]
    [ 1.198916] pnp 00:07: [io 0x0200-0x027f]
    [ 1.198917] pnp 00:07: [io 0x1000-0x100f]
    [ 1.198919] pnp 00:07: [io 0xffff]
    [ 1.198920] pnp 00:07: [io 0xffff]
    [ 1.198921] pnp 00:07: [io 0x0400-0x047f]
    [ 1.198922] pnp 00:07: [io 0x0500-0x057f]
    [ 1.198924] pnp 00:07: [io 0xef80-0xef9f]
    [ 1.198968] system 00:07: [io 0x0200-0x027f] has been reserved
    [ 1.198970] system 00:07: [io 0x1000-0x100f] has been reserved
    [ 1.198972] system 00:07: [io 0xffff] has been reserved
    [ 1.198973] system 00:07: [io 0xffff] has been reserved
    [ 1.198975] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 1.198977] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 1.198979] system 00:07: [io 0xef80-0xef9f] has been reserved
    [ 1.198981] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.198988] pnp 00:08: [io 0x0070-0x0077]
    [ 1.198993] pnp 00:08: [irq 8]
    [ 1.199017] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.199341] pnp 00:09: [io 0x0378-0x037f]
    [ 1.199343] pnp 00:09: [io 0x0778-0x077a]
    [ 1.199348] pnp 00:09: [irq 5]
    [ 1.199350] pnp 00:09: [dma 0 disabled]
    [ 1.199427] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 1.199434] pnp 00:0a: [io 0x0060]
    [ 1.199435] pnp 00:0a: [io 0x0064]
    [ 1.199440] pnp 00:0a: [irq 1]
    [ 1.199465] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.199475] pnp 00:0b: [irq 12]
    [ 1.199501] pnp 00:0b: Plug and Play ACPI device, IDs SYN0165 SYN0100 SYN0002 PNP0f13 (active)
    [ 1.199681] pnp 00:0c: [irq 23]
    [ 1.199714] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.199820] pnp 00:0d: [bus ff]
    [ 1.199856] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.199961] pnp: PnP ACPI: found 14 devices
    [ 1.199963] ACPI: ACPI bus type pnp unregistered
    [ 1.206678] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.206693] PCI: max bus depth: 2 pci_try_num: 3
    [ 1.206743] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    [ 1.206746] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206749] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
    [ 1.206751] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.206753] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 1.206756] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
    [ 1.206758] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.206762] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.206768] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
    [ 1.206777] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    [ 1.206780] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 1.206786] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
    [ 1.206791] pci 0000:00:1c.1: bridge window [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206798] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    [ 1.206804] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
    [ 1.206816] pci 0000:45:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
    [ 1.206818] pci 0000:45:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    [ 1.206820] pci 0000:45:06.2: BAR 14: assigned [io 0x2000-0x20ff]
    [ 1.206822] pci 0000:45:06.2: BAR 13: assigned [io 0x2400-0x24ff]
    [ 1.206824] pci 0000:45:06.2: CardBus bridge to [bus 46-49]
    [ 1.206825] pci 0000:45:06.2: bridge window [io 0x2400-0x24ff]
    [ 1.206830] pci 0000:45:06.2: bridge window [io 0x2000-0x20ff]
    [ 1.206834] pci 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
    [ 1.206839] pci 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
    [ 1.206843] pci 0000:00:1e.0: PCI bridge to [bus 45-46]
    [ 1.206846] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
    [ 1.206852] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
    [ 1.206857] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff pref]
    [ 1.206871] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.206874] pci 0000:00:01.0: setting latency timer to 64
    [ 1.206883] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 1.206888] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.206895] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 1.206899] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.206907] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.206912] pci 0000:00:1c.3: setting latency timer to 64
    [ 1.206920] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.206929] pci 0000:45:06.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [ 1.206933] pci 0000:45:06.2: setting latency timer to 64
    [ 1.206937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.206939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.206940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.206942] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
    [ 1.206944] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 1.206945] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 1.206947] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 1.206948] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
    [ 1.206950] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.206952] pci_bus 0000:02: resource 1 [mem 0xd7300000-0xd73fffff]
    [ 1.206954] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
    [ 1.206956] pci_bus 0000:03: resource 1 [mem 0xd3300000-0xd72fffff]
    [ 1.206957] pci_bus 0000:03: resource 2 [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206959] pci_bus 0000:44: resource 1 [mem 0xd3200000-0xd32fffff]
    [ 1.206961] pci_bus 0000:45: resource 0 [io 0x2000-0x2fff]
    [ 1.206962] pci_bus 0000:45: resource 1 [mem 0xd3100000-0xd31fffff]
    [ 1.206964] pci_bus 0000:45: resource 2 [mem 0xd8000000-0xdbffffff pref]
    [ 1.206966] pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7]
    [ 1.206967] pci_bus 0000:45: resource 5 [io 0x0d00-0xffff]
    [ 1.206969] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.206971] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
    [ 1.206972] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 1.206974] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
    [ 1.206976] pci_bus 0000:46: resource 0 [io 0x2400-0x24ff]
    [ 1.206977] pci_bus 0000:46: resource 1 [io 0x2000-0x20ff]
    [ 1.206979] pci_bus 0000:46: resource 2 [mem 0xd8000000-0xdbffffff pref]
    [ 1.206980] pci_bus 0000:46: resource 3 [mem 0xdc000000-0xdfffffff]
    [ 1.207041] NET: Registered protocol family 2
    [ 1.207193] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.208004] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.210259] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.210529] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.210531] TCP reno registered
    [ 1.210541] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.210575] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.210741] NET: Registered protocol family 1
    [ 1.210853] pci 0000:01:00.0: Boot video device
    [ 1.210883] PCI: CLS 64 bytes, default 64
    [ 1.210926] Unpacking initramfs...
    [ 1.237784] Freeing initrd memory: 2384k freed
    [ 1.238199] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.238203] Placing 64MB software IO TLB between ffff8800bafbc000 - ffff8800befbc000
    [ 1.238205] software IO TLB at phys 0xbafbc000 - 0xbefbc000
    [ 1.238640] audit: initializing netlink socket (disabled)
    [ 1.238651] type=2000 audit(1323686434.066:1): initialized
    [ 1.247029] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.264476] VFS: Disk quotas dquot_6.5.2
    [ 1.264585] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.264725] msgmni has been set to 7624
    [ 1.264913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.264947] io scheduler noop registered
    [ 1.264949] io scheduler deadline registered
    [ 1.264987] io scheduler cfq registered (default)
    [ 1.265090] pcieport 0000:00:01.0: setting latency timer to 64
    [ 1.265113] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.265170] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 1.265219] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 1.265296] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 1.265344] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 1.265428] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 1.265474] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 1.265558] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 1.265561] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 1.265563] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
    [ 1.265565] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 1.265584] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 1.265589] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 1.265605] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 1.265610] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 1.265626] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 1.265628] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
    [ 1.265633] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 1.265699] intel_idle: MWAIT substates: 0x1120
    [ 1.265700] intel_idle: v0.4 model 0x25
    [ 1.265701] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.265768] ERST: Table is not found!
    [ 1.265769] GHES: HEST is not enabled!
    [ 1.265840] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.453354] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.473900] 0000:00:16.3: ttyS0 at I/O 0x6050 (irq = 17) is a 16550A
    [ 1.510096] Linux agpgart interface v0.103
    [ 1.510161] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.511890] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.512657] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.512669] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.512671] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.512672] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.512674] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.512749] mousedev: PS/2 mouse device common for all mice
    [ 1.512823] rtc_cmos 00:08: RTC can wake from S4
    [ 1.512935] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 1.512964] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.513041] cpuidle: using governor ladder
    [ 1.513163] cpuidle: using governor menu
    [ 1.513376] TCP cubic registered
    [ 1.513378] NET: Registered protocol family 17
    [ 1.513386] Registering the dns_resolver key type
    [ 1.513807] PM: Hibernation image not present or could not be loaded.
    [ 1.513811] registered taskstats version 1
    [ 1.522554] rtc_cmos 00:08: setting system clock to 2011-12-12 10:40:35 UTC (1323686435)
    [ 1.522600] Initializing network drop monitor service
    [ 1.523790] Freeing unused kernel memory: 712k freed
    [ 1.523892] Write protecting the kernel read-only data: 8192k
    [ 1.528829] Freeing unused kernel memory: 1968k freed
    [ 1.531057] Freeing unused kernel memory: 704k freed
    [ 1.542022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.544068] udevd[47]: starting version 175
    [ 1.599208] usbcore: registered new interface driver usbfs
    [ 1.599233] usbcore: registered new interface driver hub
    [ 1.599416] usbcore: registered new device driver usb
    [ 1.600050] SCSI subsystem initialized
    [ 1.600539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.600569] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.600604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.600609] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.600660] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.600702] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.604618] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.604642] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd7429000
    [ 1.612423] libata version 3.00 loaded.
    [ 1.616495] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.616708] hub 1-0:1.0: USB hub found
    [ 1.616718] hub 1-0:1.0: 3 ports detected
    [ 1.616798] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 1.616846] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.616850] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.616858] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.616892] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.620853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.620870] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd7428000
    [ 1.633241] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.633425] hub 2-0:1.0: USB hub found
    [ 1.633428] hub 2-0:1.0: 3 ports detected
    [ 1.633490] ahci 0000:00:1f.2: version 3.0
    [ 1.633505] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [ 1.633563] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.633604] ahci: SSS flag set, parallel bus scan disabled
    [ 1.646580] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
    [ 1.646586] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.646593] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.674199] scsi0 : ahci
    [ 1.674387] scsi1 : ahci
    [ 1.674534] scsi2 : ahci
    [ 1.674684] scsi3 : ahci
    [ 1.674835] scsi4 : ahci
    [ 1.674985] scsi5 : ahci
    [ 1.675403] ata1: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427100 irq 44
    [ 1.675410] ata2: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427180 irq 44
    [ 1.675415] ata3: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427200 irq 44
    [ 1.675419] ata4: DUMMY
    [ 1.675423] ata5: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427300 irq 44
    [ 1.675428] ata6: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427380 irq 44
    [ 1.923050] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 1.993019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.994452] ata1.00: unexpected _GTF length (8)
    [ 1.994830] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
    [ 1.994835] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.996687] ata1.00: unexpected _GTF length (8)
    [ 1.997082] ata1.00: configured for UDMA/100
    [ 1.997470] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
    [ 2.047202] hub 1-1:1.0: USB hub found
    [ 2.047403] hub 1-1:1.0: 6 ports detected
    [ 2.152951] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 2.239527] Refined TSC clocksource calibration: 2526.999 MHz.
    [ 2.239535] Switching to clocksource tsc
    [ 2.277235] hub 2-1:1.0: USB hub found
    [ 2.277408] hub 2-1:1.0: 8 ports detected
    [ 2.316165] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.334512] ata2.00: unexpected _GTF length (8)
    [ 2.334518] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
    [ 2.355676] ata2.00: unexpected _GTF length (8)
    [ 2.355683] ata2.00: configured for UDMA/100
    [ 2.356266] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
    [ 2.359674] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
    [ 2.509545] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
    [ 2.672631] ata3: SATA link down (SStatus 0 SControl 300)
    [ 2.672757] usb 1-1.5: new high speed USB device number 5 using ehci_hcd
    [ 2.875952] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
    [ 2.992454] ata5: SATA link down (SStatus 0 SControl 300)
    [ 3.312277] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.316018] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 3.316114] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 3.316135] usbcore: registered new interface driver usbhid
    [ 3.316137] usbhid: USB HID core driver
    [ 3.317866] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.317917] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.317920] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.317948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.381721] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    [ 3.382336] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.387890] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.387894] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.388140] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 4.529129] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.120324] udevd[270]: starting version 175
    [ 6.255132] ACPI: acpi_idle yielding to intel_idle
    [ 6.278921] Bluetooth: Core ver 2.16
    [ 6.278933] NET: Registered protocol family 31
    [ 6.278934] Bluetooth: HCI device and connection manager initialized
    [ 6.278936] Bluetooth: HCI socket layer initialized
    [ 6.278937] Bluetooth: L2CAP socket layer initialized
    [ 6.278941] Bluetooth: SCO socket layer initialized
    [ 6.300296] vboxdrv: Found 4 processor cores.
    [ 6.300421] VBoxDrv: dbg - g_abExecMemory=ffffffffa01efbe0
    [ 6.300464] vboxdrv: fAsync=0 offMin=0x29e offMax=0x2215
    [ 6.300512] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 6.300513] vboxdrv: Successfully loaded version 4.1.6_OSE (interface 0x00190000).
    [ 6.488419] acpi device:04: registered as cooling_device4
    [ 6.489048] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input2
    [ 6.489055] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
    [ 6.493230] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.493233] ACPI: Thermal Zone [EXTZ] (56 C)
    [ 6.496212] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.496215] ACPI: Thermal Zone [EX2Z] (45 C)
    [ 6.497643] thermal LNXTHERM:02: registered as thermal_zone2
    [ 6.497646] ACPI: Thermal Zone [PWMZ] (21 C)
    [ 6.500635] thermal LNXTHERM:03: registered as thermal_zone3
    [ 6.500638] ACPI: Thermal Zone [LOCZ] (51 C)
    [ 6.501270] thermal LNXTHERM:04: registered as thermal_zone4
    [ 6.501273] ACPI: Thermal Zone [GFXZ] (0 C)
    [ 6.511776] ACPI: Battery Slot [BAT0] (battery present)
    [ 6.511827] ACPI: Battery Slot [BAT1] (battery absent)
    [ 6.512205] ACPI: AC Adapter [AC] (on-line)
    [ 6.512276] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 6.512282] ACPI: Sleep Button [SLPB]
    [ 6.512332] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 6.512361] ACPI: Lid Switch [LID]
    [ 6.512400] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.512403] ACPI: Power Button [PWRF]
    [ 6.519354] wmi: Mapper loaded
    [ 6.520815] thermal LNXTHERM:05: registered as thermal_zone5
    [ 6.520818] ACPI: Thermal Zone [BATZ] (26 C)
    [ 6.530427] thermal LNXTHERM:06: registered as thermal_zone6
    [ 6.530431] ACPI: Thermal Zone [EGXZ] (59 C)
    [ 6.530717] thermal LNXTHERM:07: registered as thermal_zone7
    [ 6.530719] ACPI: Thermal Zone [CPUZ] (50 C)
    [ 6.530903] thermal LNXTHERM:08: registered as thermal_zone8
    [ 6.530905] ACPI: Thermal Zone [MCHZ] (56 C)
    [ 6.531093] thermal LNXTHERM:09: registered as thermal_zone9
    [ 6.531095] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 6.546388] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 6.554082] sdhci: Secure Digital Host Controller Interface driver
    [ 6.554086] sdhci: Copyright(c) Pierre Ossman
    [ 6.555286] sdhci-pci 0000:45:06.1: SDHCI controller found [1180:0822] (rev 25)
    [ 6.555304] sdhci-pci 0000:45:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [ 6.556337] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 6.556344] sdhci-pci 0000:45:06.1: setting latency timer to 64
    [ 6.556366] _regulator_get: 0000:45:06.1 supply vmmc not found, using dummy regulator
    [ 6.557402] Registered led device: mmc0::
    [ 6.558446] mmc0: SDHCI controller on PCI [0000:45:06.1] using DMA
    [ 6.642646] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.649218] iTCO_vendor_support: vendor-support=0
    [ 6.697973] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 6.697993] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 6.699039] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
    [ 6.699239] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 6.702982] ppdev: user-space parallel port driver
    [ 6.718496] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 6.727366] parport_pc 00:09: reported by Plug and Play ACPI
    [ 6.727472] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 6.788688] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.788791] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
    [ 6.788902] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.793684] yenta_cardbus 0000:45:06.2: CardBus bridge found [103c:172b]
    [ 6.818976] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.924544] yenta_cardbus 0000:45:06.2: ISA IRQ mask 0x0c98, PCI irq 22
    [ 6.924548] yenta_cardbus 0000:45:06.2: Socket status: 30000818
    [ 6.924552] pci_bus 0000:45: Raising subordinate bus# of parent bus (#45) from #46 to #49
    [ 6.924559] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
    [ 6.924562] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd3100000-0xd31fffff]
    [ 6.924564] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3100000-0xd31fffff: excluding 0xd3100000-0xd310ffff
    [ 6.924573] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
    [ 6.924575] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
    [ 6.925821] firewire_ohci 0000:45:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 6.925828] firewire_ohci 0000:45:06.0: setting latency timer to 64
    [ 6.983612] firewire_ohci: Added fw-ohci device 0000:45:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 6.990475] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 6.990759] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.990773] mei 0000:00:16.0: setting latency timer to 64
    [ 6.997179] hp_accel: laptop model unknown, using default axes configuration
    [ 7.031262] lis3lv02d: 8 bits sensor found
    [ 7.065278] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
    [ 7.065281] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 7.065315] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.065326] e1000e 0000:00:19.0: setting latency timer to 64
    [ 7.065502] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 7.066848] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
    [ 7.067047] Registered led device: hp::hddprotect
    [ 7.067065] hp_accel: driver loaded
    [ 7.077969] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 7.077971] Copyright(c) 2003-2011 Intel Corporation
    [ 7.078012] iwlagn 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 7.078020] iwlagn 0000:44:00.0: setting latency timer to 64
    [ 7.078107] iwlagn 0000:44:00.0: pci_resource_len = 0x00002000
    [ 7.078110] iwlagn 0000:44:00.0: pci_resource_base = ffffc900110a8000
    [ 7.078114] iwlagn 0000:44:00.0: HW Revision ID = 0x35
    [ 7.078195] iwlagn 0000:44:00.0: irq 46 for MSI/MSI-X
    [ 7.078233] iwlagn 0000:44:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
    [ 7.078293] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 7.095212] iwlagn 0000:44:00.0: device EEPROM VER=0x436, CALIB=0x6
    [ 7.095216] iwlagn 0000:44:00.0: Device SKU: 0X1f0
    [ 7.095234] iwlagn 0000:44:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 7.231376] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 70:5a:b6:9c:d9:12
    [ 7.231380] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 7.231426] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
    [ 7.241803] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.241815] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.241829] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.241956] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 7.241987] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 7.381485] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
    [ 7.421464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [ 7.436929] input: HDA Intel Line In at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 7.437020] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 7.437074] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 7.437127] input: HDA Intel HP Out at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 7.437354] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.437357] hda_intel: Disabling MSI
    [ 7.437418] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [ 7.468280] nvidia: module license 'NVIDIA' taints kernel.
    [ 7.468284] Disabling lock debugging due to kernel taint
    [ 7.483375] firewire_core: created device fw0: GUID 5566778811223344, S400
    [ 7.513131] iwlagn 0000:44:00.0: loaded firmware version 9.221.4.1 build 25532
    [ 7.513376] Registered led device: phy0-led
    [ 7.528617] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 7.615404] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 7.688700] padlock_aes: VIA PadLock not detected.
    [ 7.704789] usbcore: registered new interface driver btusb
    [ 7.809724] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
    [ 7.809737] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3110000-0xd31fffff: excluding 0xd31fe000-0xd320bfff
    [ 7.818215] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
    [ 7.818599] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
    [ 7.818672] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    [ 7.818712] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
    [ 7.829822] Linux media interface: v0.10
    [ 7.874357] scsi6 : pata_pcmcia
    [ 7.874447] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
    [ 7.924848] Linux video capture interface: v2.00
    [ 8.119588] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.129386] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
    [ 8.167213] input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
    [ 8.167403] usbcore: registered new interface driver uvcvideo
    [ 8.167407] USB Video Class driver (1.1.1)
    [ 8.173608] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 8.206197] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.216862] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
    [ 8.296149] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.382758] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 9.425949] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
    [ 9.426044] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
    [ 9.426158] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
    [ 9.426237] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
    [ 9.426609] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 9.426618] nvidia 0000:01:00.0: setting latency timer to 64
    [ 9.426624] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 9.426777] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
    [ 10.662089] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 10.902053] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.969898] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [ 11.014158] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [ 11.121788] Adding 2928636k swap on /dev/sda6. Priority:-1 extents:1 across:2928636k
    [ 12.670950] NET: Registered protocol family 10
    [ 14.106472] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 14.159688] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 14.160148] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 14.200761] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 14.207369] iwlagn 0000:44:00.0: Radio type=0x1-0x3-0x1
    [ 14.441087] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 14.447672] iwlagn 0000:44:00.0: Radio type=0x1-0x3-0x1
    [ 14.544705] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 16.289430] e1000e 0000:00:19.0: PCI INT A disabled
    [ 16.289443] e1000e 0000:00:19.0: PME# enabled
    [ 22.651552] wlan0: authenticate with 00:25:9c:93:96:8d (try 1)
    [ 22.653433] wlan0: authenticated
    [ 22.705748] wlan0: associate with 00:25:9c:93:96:8d (try 1)
    [ 22.722077] wlan0: RX AssocResp from 00:25:9c:93:96:8d (capab=0x531 status=0 aid=1)
    [ 22.722084] wlan0: associated
    [ 22.727389] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 32.055575] fuse init (API version 7.17)
    [ 33.475517] wlan0: no IPv6 routers present
    [ 38.744042] EXT4-fs (sda7): re-mounted. Opts: commit=0
    [ 38.893007] EXT4-fs (sda5): re-mounted. Opts: commit=0
    [ 39.020099] EXT4-fs (sda9): re-mounted. Opts: commit=0
    [ 39.621923] EXT4-fs (sda8): re-mounted. Opts: commit=0
    [ 160.550726] iwlagn 0000:44:00.0: Tx aggregation enabled on ra = 00:25:9c:93:96:8d tid = 0
    As for my boot line:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,4)
    kernel /vmlinuz-linux root=/dev/sda7 ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,4)
    kernel /vmlinuz-linux root=/dev/sda7 ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1

Maybe you are looking for