UPS for 2 dell r710s and some switches. What gives longest run time?

Hello all, I hope this section also counts for battery backup? I have been looking at tons of different options for UPS, and of course there are the watts, VA ratings, and amount of batteries you actually have connected, but what is the best to shoot for?We have one eaton 9130 with an extra battery pack on it, but most everything is plugged in to it and its at nearly full load as is. We also have 2 dell R710's that I have each individually one larger individual UPS's, but they are only the bigger desktop model ones.I am trying to get a decent runtime setup to put the 2 r710's on, and probably half the switches (6 of them total, HP procurve's 1 48, 3 24's, and 1 16port L3, and a sonicwall tz215)I was looking at the cyberpower systems backups, and they have 3kw ones with extra battery options.Can anyone make a recommendation on what...
This topic first appeared in the Spiceworks Community

Similar Messages

I am considering a base 21" iMac ($1099 @ Best Buy) for home use. It would be my first Mac. Is the base model powerful enough for everyday home use and some light video editing or should I upgrade the CPU, Ram and to a Fusion drive?

I am considering a base 21" iMac ($1099 @ Best Buy) for home use. It would be my first Mac. Is the base model powerful enough for everyday home use and some light video editing or should I upgrade the CPU, Ram and to a Fusion drive?
Purchasing with the upgrades through Apple would add about $800 over the Black Friday deal at Best Buy. Just looking for some advice if I will be satisfied with the based model.

All models will do what you want. Upgraded models will do it faster than the standard models.
Just why are you thinking of switching to a Mac?

[svn:fx-trunk] 15810: * Package and class level javadoc for the antTasks module and some

Revision: 15810
Revision: 15810
Author:   [email protected]
Date:     2010-04-29 02:47:22 -0700 (Thu, 29 Apr 2010)
Log Message:
Package and class level javadoc for the antTasks module and some
other stragglers.
QE notes:
Doc notes:
Bugs:
Reviewer: Corey (post commit)
Tests run: checkintests
Is noteworthy for integration: NO
Modified Paths:
    flex/sdk/trunk/modules/antTasks/src/flex/ant/AsDocTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/AscTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/CompcTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/FlexTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/HtmlWrapperTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/MxmlcTask.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/ConfigAppendString.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/ConfigBoolean.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/ConfigInt.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/ConfigString.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/ConfigVariable.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/NestedAttributeElement.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/OptionSpec.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/RepeatableConfigString.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/DefaultScriptLimits.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/DefaultSize.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/FlexFileSet.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/Fonts.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/Metadata.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/RuntimeSharedLibraryPath.java
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/URLElement.java
    flex/sdk/trunk/modules/compiler/src/java/flash/css/LocalSource.java
    flex/sdk/trunk/modules/compiler/src/java/flash/css/URLSource.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/DependencyWalker.java
Added Paths:
    flex/sdk/trunk/modules/antTasks/src/flex/ant/config/package.html
    flex/sdk/trunk/modules/antTasks/src/flex/ant/package.html
    flex/sdk/trunk/modules/antTasks/src/flex/ant/types/package.html

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Video tutorials for After Effects CS4 (and some still relevant from CS3)

I just added a post to my blog about some new video tutorials that we posted (and some old ones that are still relevant):
video tutorials for After Effects CS4 (and some still relevant from CS3)

Thanks Todd!

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

If you mean Siri then that is only on the iPad 3, it is not on the iPad 2 in iOS 6 (possibly because the iPad 2 doesn't have the Audience chip which the iPad 3 does). If there are other things that you think are missing (YouTube has been removed, and Passbooks is iPhone and iPod Touch only) ?

My mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

my mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do n

I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

Hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not

I always download stuff then is suddenly asked for my secureity questions. and i guess what they were then it kicked me off

I always download stuff then is suddenly asked for my secureity questions. and i guessed what they were then it kicked me off

how can i re-access my acount and change my secureity questions

Can we load and unload the files in the run time?

Can we load and unload the files in the run time?
For example there are four files named "test1.h & test1.c" and another set "test2.h & test2.c" (I attached them as attachment to this post).
test1.h contains code:
int variable; //variable declared as integer
test1.c contains code:
variable = 1; //variable assigned a value
test1.h contains code:
char *variable; //variable declared as string
test1.c contains code:
variable = "EXAMPLE"; //variable assigned a string
So here, in this case can I dynamically load / unload the first & second group of files so that the same variable name "variable" can be used both as integer and string? And if yes, how is that to be done?
Solved!
Go to Solution.
Attachments:
test.zip ‏1 KB

What do you mean by "dynamically"?
If you want to have a variable that either is an int or a char in the same program run, I'm afraid your only option is to define it as a variant and assign from time to time the proper data type in the variant according to some condition. Next, every time you access the variable you must firstly check which data type is stored in it, next access it in the proper way.
If on the other hand your option or to have a run in which the variable is an int, next you stop the program and in a following run it is a char, you may have it by using some appropriade preprocessor clause:
#ifdef CHAR_TYPE
#include "test1.h"; // variable defined as a char
#else
#include "test2.h"; // variable defined as int
#endif
Next, every time you want to access the variable you must proceed in the same vay:
#ifdef CHAR_TYPE
variable = "string";
#else
variable = 1;
#endif
Does it worth the effort?
Additionally, keep in mind that this "dynamical" approach can work only in the IDE, where you can properly #define your CHAR_TYPE or not depending on your wishes: when you compile the program, it will have only one #include depending on the definition of the macro.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to get the Title and Tcode of a Program during run time

Hello,
I am new to abap and I have this question please. Is the a way to get the title, Tcode and Author of a program during run time? I would like to get the name and title of a program or a view or an include during run time.
Using table TADIR, you can only get the object_name and the author. Is the a way for me to get the Title of the repository object and any Tcode if any is available for the case of a program?
I loop forward for your respond.
Thank you.
Sabina

You can get it by accessing SYST.
SY-TITLE for Title
SY-TCODE for Tcode
I don't think there is any field in SYST for the Author.
To get the author name you can use the TRDIR table.
Regards,
Naimesh Patel

On my older Nano my iTunes music library shows 28 GB but I only have a fraction selected for download (maybe 2 GB total).. what gives?

On my older Nano my iTunes music library shows 28 GB but I only have a fraction selected for download (maybe 2 GB total).. what gives?

Update OS X also. To learn how to do that read OS X: Updating OS X and Mac App Store apps
Rid your Mac of the adware that is installed. To do that with Safari, go to the Safari menu > Preferences > Extensions. Uninstall any Extensions that appear unless you know their purpose and are certain you need. To learn how adware may have come to be installed on your Mac, read How to install adware.

UPS for 2 dell r710s and some switches. What gives longest run time?

Similar Messages

Maybe you are looking for