UPS, USB-connectable with: UPSmart2000i. Is there software, compatible with Mac OS X 10.8..?!

I bought a 2000 VA interactive UPX ( Turbo-X brand, "PLAISIO" stores' proprietary, Greece), USB-connectable with software for Windows provided: upsmart2000i.
Is there other software available for it, compatible with Mac OS X 10.8..?!
I attempted to install the APCAGENT.app along with the "Growl": after installation, the APCAGENT.app was not able to find the IP address of the ULS or to establish any communication with it; it didn't even detec the presence of the already running GROWL app.

TYPOS CORRECTED:
...a 2000 VA interactive UPS ("Turbo-X" brand.....
...the APCAGENT.app wan not able to find the IP address of the UPS or ti establish....
....didn't even detect the presence...
Generic UPS software Mac-compatible needed
Apologies for typos and any inconvenience

Similar Messages

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

Is there software available for Mac like Microsoft "Streets

Is there software available for Mac like Microsoft "Streets & Maps" ?

Google Maps isnt as easy, I have many stops in a given area that I can just download and route.

No video signal in remote connection with Mac mini when the display is off

No video signal in remote connection with Mac mini when the display is off

So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)

Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)

Error message?

Problem while using Internet USB Connection with Macbook Pro

Hi...
My name is udayan and i am from India, I am using MACBOOK PRO from last 1 year. For most of this period i have used wi-fi connection for my laptop. But recently i have purchased a Relience Net connect Device for Internet facility. As soon as i started using this device, i have started facing an unusual problem. Whenever i start using it, after 5-10 mins. a fade screen appears and asks me to RESTART the laptop. This keeps on happening after every 10-15 mins which is pretty annoying. I have tried to use the same Internet device on normal laptops and it works just fine with that machine.
Can you please help me to understand this phenomena? Is it a MAC limitation or something else?
Hope to hear it from you soon.....
Cheers!!!

I tried to connect with Ethernet the MACBOOK Pro to the modem but the situation hasn't changed
Are you saying you cannot connect to the internet wirelessly and through the ethernet? If so, there is something else going on.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
=============
Mac OS X (10.4.6)
Use Software Update to update your OS to last version of Tiger which is OS 10.4.11. Install all the other updates that goes along w/it.

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

Hp 6535b drops usb connection with kvm.

I have a hp 6535b and have a kvm attached to it. It drops usb connection on a regular basis and it is very annoying. I am not sure what i shoud do about it so any help will be appreciated.

Hi!, Ranothil: If you have the next cable and "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, anydata, from HP50G, to PC and viceversa, across Connectivity Kit (Conn4x), without problem. Please, see this link, with instruction's, for transfer data with serial cable, null modem and connectivity kit ... http://sense.net/~egan/skb/ and/or ... http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=125259 Note: Better, if you transfer data, from HP50G to, PC and viceversa, across the microUSB.

USB connection with Nokia N70

While my imac can see the N70 via the USB connection, isync doesn't see the phone. I want to transfer photos/video from the phone to the imac and imagine the usb to be way faster than bluetooth. Can anyone hopefully point out an obvious solution to the dilemma??

I'm not familiar with the N70 but I have a N3230.
I simply remove the MMC card from the phone and plug it into my USB card reader. It then mounts itself as a drive on the desktop and I can manipulate its content.

Losing keyboard USB connection with Lion

I'm running 10.7.3 on my Mac Pro4,1 and have the standard Apple USB keyboard attached while using the Apple BT trackpad. After sleep and/or log off, I am often not able to use the keyboard any longer. To revive it, I must restart my system. Any recommendations for fixing this issue???? Thanks

Most problems of "xxxxx unresponsive after sleep" are caused by USB or FireWire devices that are not compatible with Mac Deep Sleep, which essentially powers them off. If they wake up again, often they are so confused they take out the entire Bus or subsystem they are attached to.
So i would look next at other USB devices.

USB microphone with Mac mini - can it work?

I recently bought a cheap USB camera with built-in mic, and a USB headphone/microphone interface. Neither of these microphones work with my shiny new Mac mini (10.7.2). The headphone USB interface works fine, and it even includes a volume and mute - very cool indeed (Arvel HAMU02BK if you want to look it up). In the Sound Preference pane, it shows up as an input, but the meter doesn't show any response. I plug the same mic and adaptor into a G4 PowerBook (10.5.8) and it works. The camera (Buffalo BSW13K08HBK) also shows up as a mic in the Sound Preference pane, but the meter fails to respond (shows about a 60% continuous input signal, but using it with Skype test, doesn't record anything.
USB2.0 Camera:
Product ID:          0x0103
Vendor ID:          0x1e4e (Etron Technology, Inc.)
Version:          0.02
Speed:          Up to 480 Mb/sec
Manufacturer:          Etron Technology, Inc.
Location ID:          0xfa121110 / 11
Current Available (mA):          500
Current Required (mA):          100
C-Media USB Headphone Set :
Product ID:          0x000c
Vendor ID:          0x0d8c (C-MEDIA ELECTRONICS INC.)
Version:          1.00
Speed:          Up to 12 Mb/sec
Location ID:          0xfa121130 / 12
Current Available (mA):          500
Current Required (mA):          100
Camera itself seems to work nicely, though, and there seems to be enough power off the hub to make things work. Is this a bug? If I want to plug a mic into the Mac itself, can I use any of the "pink" 3-pole 3.5mm computer mics?

Followup - I'm getting:
kernel: 0        0 AppleUSBCDC: start - initDevice failed
on the Console every time one of these beasts gets connected. What to do about this?

Officejet not able to connect with MAC wirelessly but will connect to W7 PC

I have a 6700 Office jet and have it setup to print wirelessly with a W7 PC. The Mac will not connect to the printer wirelessly but will print via usb connection. Any hints?

Hi jecp,
It sounds like the router is not broadcasting the Bonjour protocol. The Mac uses Bonjour and the Windows uses DHCP. You may need to contact the Internet Service Provider (IPS), but you can try the steps below, I have seen success with a simple reboot.
Leave the printer on and unplug the power cable
Shut down the Mac, Click the Apple Icon and select Shut Down
Leave the router on and unplug the power cable, do not press any buttons
After one full minute, plug the router back in and wait for the lights to illuminate again and stedily
Plug the printer back in and wait for the wireless light to become solid
Turn the computer back on
Now try to add the printer to the Print and Scan in System Preferences.
Please let me know if this resolves the issue. I am happy to provide additional assistance if necessary.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Bluetooth connection with Mac Book Pro

How do I set up a Bluetooth connection with my Mac Book Pro?

I'm trying to set up the Blue Tooth connection so I can use internet tethering from my iPhone to my MacBook Pro. I have already set up the USB option and that works well on my Rogers network. I've achieved Bluetooth paring between the iPhone and MacBook, but I can't get them to connect.
I'm using Snow Leopard, if that makes any difference.
Any ideas?

Changed to secure - can connect with mac but not pc running vista

I changed my wrt54gs from unsecured to secure by changing the wireless > wireless security > to security mode: WPA personal, the wpa algorithms is set to TKIP, i set up a password in the shared key area and the group key is set to 3600. I saved the changes and now i can connect with the password with a macbook pro as well as with a ipod touch but i cant connect with a laptop running windows vista. I would get an error saying unable to connect, funny thing is though i am connect (and it is the correct router, not a neighbors) but it says connected with limited access. I tried to run diagnostics and repair but to no avail. Any thoughts on what to door is limited access ok?
thanks,
Dave

Try this :
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

Can connect with Macs but not PCs - iChat 2.1 OSX 10.3.9

Hi, I am having problems connecting to PCs but can connect to other Macs fine. I have ploughed through as much of the correspondance on here as I can find but with no luck. Would I be right in assuming that if I can connect OK to another Mac (with .mac name or AIM name) my settings should be OK?
Cheers,
Mike

Hi Mike
Try me and see, defcom1 .mac account.
Has the PC side-up ok, see for set-up http://www.mvldesign.com/videoconferencetutorial.html#xp they must be using AIM5.9 and not AIM Triton
Tony

UPS, USB-connectable with: UPSmart2000i. Is there software, compatible with Mac OS X 10.8..?!

Similar Messages

Maybe you are looking for