Uptime being reported incorrectly

Hey guys
I have this little weird problem... I know I shoudln't be -too- concerned about uptime since my arch still works beautifully, but it's like one of those small details in a picture that keeps annoying you from far, far away until you finally explode and rant about it, if you get what I mean .
The problem is simple: my uptime is being reported incorrectly! take a look:
[dragon@cave ~]$ uptime
09:57:21 up 13 min, 1 user, load average: 0.02, 0.12, 0.10
[dragon@cave ~]$ date
mié ago 26 09:57:22 VET 2009
[dragon@cave ~]$
Apparently, I turned the PC about 10 hours ago? I just turned it on 30 minutes ago! what could be happening?
Here goes some "last" output:
dragon tty7 :0 Wed Aug 26 09:44 still logged in
reboot system boot 2.6.30-ARCH Wed Aug 26 09:43 (00:14)
dragon tty7 :0 Wed Aug 26 03:26 - down (01:23)
dragon tty7 :0 Wed Aug 26 03:25 - 03:26 (00:01)
dragon tty7 :0 Wed Aug 26 00:25 - 03:25 (03:00)
reboot system boot 2.6.30-ARCH Wed Aug 26 00:25 (04:25)
dragon tty7 :0 Mon Aug 24 15:12 - down (1+07:19)
dragon tty7 :0 Mon Aug 24 12:37 - 15:12 (02:35)
reboot system boot 2.6.30-ARCH Mon Aug 24 12:37 (1+09:55)
dragon tty1 Mon Aug 24 05:15 - down (01:14)
dragon tty1 Mon Aug 24 05:15 - 05:15 (00:00)
dragon tty7 :0 Mon Aug 24 05:04 - down (01:25)
dragon tty7 :0 Mon Aug 24 23:14 - 05:04 (-18:-10)
reboot system boot 2.6.30-ARCH Mon Aug 24 23:14 (-16:-44)
dragon tty7 :0 Mon Aug 24 03:53 - crash (19:20)
dragon tty7 :0 Mon Aug 24 03:29 - 03:53 (00:24)
dragon tty7 :0 Mon Aug 24 03:28 - 03:29 (00:00)
dragon tty7 :0 Mon Aug 24 03:27 - 03:28 (00:00)
dragon tty7 :0 Mon Aug 24 03:22 - 03:27 (00:05)
dragon tty7 :0 Mon Aug 24 03:15 - 03:22 (00:06)
dragon tty7 :0 Mon Aug 24 03:15 - 03:15 (00:00)
dragon tty1 Mon Aug 24 03:15 - crash (19:59)
dragon tty1 Mon Aug 24 03:15 - 03:15 (00:00)
dragon tty7 :0 Mon Aug 24 03:14 - 03:15 (00:00)
dragon tty7 :0 Mon Aug 24 19:30 - 03:14 (-16:-16)
dragon tty7 :0 Mon Aug 24 19:30 - 19:30 (00:00)
dragon tty7 :0 Mon Aug 24 18:57 - 19:30 (00:32)
dragon tty1 Mon Aug 24 18:55 - 18:56 (00:01)
dragon tty1 Mon Aug 24 18:55 - 18:55 (00:00)
dragon tty7 :0 Mon Aug 24 18:53 - 18:57 (00:03)
dragon tty1 Mon Aug 24 18:52 - 18:53 (00:00)
dragon tty1 Mon Aug 24 18:52 - 18:52 (00:00)
dragon tty7 :0 Mon Aug 24 17:30 - 18:53 (01:23)
dragon tty7 :0 Mon Aug 24 17:29 - 17:30 (00:00)
dragon tty1 Mon Aug 24 17:29 - 17:29 (00:00)
dragon tty1 Mon Aug 24 17:29 - 17:29 (00:00)
dragon tty7 :0 Mon Aug 24 17:25 - 17:29 (00:03)
dragon tty7 :0 Mon Aug 24 17:23 - 17:25 (00:01)
dragon tty7 :0 Mon Aug 24 16:53 - 17:23 (00:30)
dragon tty7 :0 Mon Aug 24 16:52 - 16:53 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 16:51 (-10:-21)
dragon tty2 Mon Aug 24 16:41 - down (00:09)
dragon tty2 Mon Aug 24 16:41 - 16:41 (00:00)
dragon tty1 Mon Aug 24 16:40 - down (00:09)
dragon tty1 Mon Aug 24 16:40 - 16:40 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 16:40 (00:09)
dragon tty2 Mon Aug 24 04:57 - 05:13 (00:15)
dragon tty2 Mon Aug 24 04:57 - 04:57 (00:00)
dragon tty2 Mon Aug 24 04:52 - 04:56 (00:04)
dragon tty2 Mon Aug 24 04:52 - 04:52 (00:00)
dragon tty1 Mon Aug 24 04:50 - down (00:40)
dragon tty1 Mon Aug 24 04:50 - 04:50 (00:00)
root tty1 Mon Aug 24 04:48 - 04:49 (00:01)
root tty1 Mon Aug 24 04:48 - 04:48 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 04:48 (00:41)
dragon tty2 Mon Aug 24 04:33 - down (00:13)
dragon tty2 Mon Aug 24 04:33 - 04:33 (00:00)
dragon tty1 Mon Aug 24 04:29 - down (00:18)
dragon tty1 Mon Aug 24 04:29 - 04:29 (00:00)
root tty1 Mon Aug 24 04:28 - 04:29 (00:01)
root tty1 Mon Aug 24 04:28 - 04:28 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 04:27 (00:19)
About details... well, it's a desktop PC and I never suspend or hibernate it...
Any ideas guys? if you need any more info just say, I don't know what else is needed to help solve the problem
Thanks in advance!
- DARKGuy
Last edited by DARKGuy (2009-08-26 14:37:43)

AHH... huh, y'know, I think I should do a backflip and kick myself in the back for having overlooked that up and created this thread XD...
/me hides in shame
Thank you guys ;;
Last edited by DARKGuy (2009-08-26 14:41:13)

Similar Messages

Repo being reported incorrectly!?!?

Hello, I have a car that was repoed in October of 2014 and was paid in full the next day as I thought the car was already paid off, but that's another story. Anyway, it was showing on my credit report as being "charged off/may still owe a balance." I disputed this last month on all three bureaus and now on my Equifax it's stating Repo and in the payment history it's showing Repossession as of this month, June. As I've stated, I've owned the car free and clear since October of last year. I'm trying to get my report to show that it's been paid, are they reporting this correctly? If I dispute with the bureau again and mail them a copy of the title and the letter I received from the bank stating that the car was paid in full by me last year would they have to change it?

mlgreen wrote:
Hello, I have a car that was repoed in October of 2014 and was paid in full the next day as I thought the car was already paid off, but that's another story. Anyway, it was showing on my credit report as being "charged off/may still owe a balance." I disputed this last month on all three bureaus and now on my Equifax it's stating Repo and in the payment history it's showing Repossession as of this month, June. As I've stated, I've owned the car free and clear since October of last year. I'm trying to get my report to show that it's been paid, are they reporting this correctly? If I dispute with the bureau again and mail them a copy of the title and the letter I received from the bank stating that the car was paid in full by me last year would they have to change it? Once a repo it's always a repo... ... just like once a charge off it's always a charge off. The fact that it was repoed and then paid off the next day doesn't matter... it's still a repo and can be reported as such. I believe I read that here recently... someone please correct me if I'm wrong.

The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C Runtime Library is being accessed incorrectly. Anyone know how to overcome the problem? I am using a Dell Inspiron 9400 running Vista.

The latest update to itunes has resulted in a whole series of runtime errors (R6034). Microsoft Visual C++ Runtime Library states it is being accessed incorrectly. I am also told that Apple Mobile Device Failed to Start. Additional messages suggest the error is in itunes.exe and ituneshelper.exe. I also get Error 7 (Windows error 1114). Anyone got any ideas how to overcome this (these) problems?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99527)

My account on Skype is being charged incorrectly.

My Skype account is being charged incorrectly. How do I contact someone in accounting by ophone to correct this??
Post transferred from where added to create its own new topic;
Subject/title edited accordingly to differentiate from other enquiries and to reflect post content.

It should automatically choose the iPhone number associated with the ID you are using for iMessage. If the iMessage phone number appears correctly on your iPhone, try going to Settings>Message>Send & Receive on your iPad, tap the ID, sign out, then sign back in.

BEX reporting incorrect figures after replicating objects

We have a process chain in BW that is run monthly and has been in production for a number of years with no issues.
After applying patches to our ERP6 system and upgrading to EHP4 - the process chain failed on a number of objects because the date & time stamp was different to the backend system.
I replicated the individual objects and the process chain ran successfully and the cube was available for reporting.
The business were not able to run their BEX queries as they were getting an error RFC_ERROR_SYSTEM_FAILURE TABLE_NOT_EXISTS
In BW, I ran program u201CSAP_DROP_TMPTABLESu201D. I Ticked every thing to make sure that all types of temp tables and temp reports were deleted.
The business were then able to run thier BEX queries but they said that their queries were not picking up all expected data.
The queries reported on employees with FTE headcount > 0 and Salary > 0.
I viewed the contents of the cube and I can see the employees with their FTE and Salary figures.
I ran the program u201CSAP_DROP_TMPTABLESu201D again and this time when the busines ran their BEX query it picked up the employees FTE figures but the salary is still not showing.
I have proved that the data is there by viewing the contents so what is the BEX query looking at and how can I get it to pick up the salary figures?
Edited by: Beverley Draper on Dec 29, 2011 2:43 PM
I forgot to mention that the employees who are not being picked up correctly by the BEX query have all had cost centre changes during last month. I don't see how this should affect it but it is something that they all have in common.
I have not been able to replicate the issue in our test or QA environment.
I need to assure the business that it will work when it is run again at month end on Sunday 31st December 2011. (Each time it is run it drops the cube and rebuilds it to contain 2 years worth of data).
Does any one have any ideas how I can get the BEX query to pick up the data that I can see when I view the contents of the cube?

thanks for the info.
There are no aggregates on the cube
I ran the users query in RSRT and I can see the data, however, the 17 employees that are being reported as missing by the business are showing their previous salary and the FTE for the current month is blank. (the business are only selecting people who have an FTE for the current month and a Salary)
If I run transaction RSA1 and then right click, manage then display the cube contents, it has got the correct salary and FTE for the 17 employees for the month of November.
FYI
These employees had a cost centre change on the last day of the month in November on R3 system but back dated to earlier in the month of November.
The monthly process chain ran late in the evening of 30th November which was after the changes to the employees cost centres had been made
I copied these employees to our QA system and ran the process chain and they all show the correct salary and FTE information.
I can only assume that by deleting the cube from RSA1 where it is available for reporting, and then re-running the job to create the cube again will correct it but the business do not want me to do this.
Is there any way I can refresh the data that the query is looking at because the cube has got the correct data?

HT204390 my ipad has been disabled due to the pin number being entered incorrectly too many times. how do we resolve this?

how do we reinstate ipad use when it has been disabled by pin number being entered incorrectly too many times. it is now locked

This article contains instructions on what to do if your device is disabled:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

Â£ is being reported in Oracle reports instead of £

Hi,
Â£ is being reported in Oracle reports instead of £, when actually "£" is stored in the database tables.
I am using Oracle Reports version 9.0.2.3.0 with encoding="UTF-8"
Any idea why?
Cheers,
Gautam

Could be a NLS_LANG setup problem.
You should first check with the SQL DUMP function if the data is correctly stored in the database.

SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert) after Firefox 36 Upgrade

When upgrading from Firefox 35 to 36 (Windows 8, 32 bit) I start getting "SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert)" SSL errors on at least one website I use. (https://marketplace.ibmcloud.com).
The message only appears when I get redirected to the website again after a previous OpenID login (some more cookies are set). When I browse the website without authentication it works on the encryption without any issues.
None of [1] applied, I do not experience this problem with any other browser or the previous version of Firefox. It seems to be limited to the specific case. Clearing any kind of cache, enable / disabled the ssl3* mechanisms, did have zero effect.
Is there any other way to debug this or someone has an idea what changed with Firefox 36 to introduce this behavior? I downgraded back to 35 for now to work again.
[1] https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=SSL+peer+reports+incorrect+Message+Authentication+Code+(Error+code%3A+ssl_error_bad_mac_alert)&step=aaq-question

I created a ticket there as well for them to investigate, although knowing IBM I guess we know the answer already, if I hear anything from there I will let you know.
However, as the problem only occurs on the one version of Firefox as of right now, I'm inclined to role out potential server side issues as a reason and pass it to something within Firefox, or was there a change any encryption defaults that might force the server to switch to a different version or something that might have the bug?

Adobe forms central being reported to Google as a Phishing website

I have pop up windows for my fillable forms. When arriving to these pages from links on my website, Google shows a warning that adobeformscentral.com has been reported as a phishing website. Of course, this is not correct. I merely have embedded forms on these pages in order to gather information to service my clients.
Have you run across this error previously, and if so, what is the recommended fix?

Here is a link to a main page:
http://anthemlegal.com/ANTHEM_PARALEGAL_SERVICES___Arizona_Paralegal_Services_Legal_Docume nt_Preparation_Arizona_Divorce_Living_Trust_Will_Power_of_Attorney_Legal_Aid_Notary_AZ.htm l
Here is a link to a pop up window with questionnaire on it:
http://anthemlegal.com/questionnaire/General_Doc_Request.html
Attached is the error screen from Google.
I am using Safari.
Here is the error code when using Firefox:
I've moved these "pop-up" pages to a different folder on my Hosting account, and still get the same errors, with adobeformscentral.com[form id number] being reported.
This seriously effects my website business, as I gather information from clients to provide my service.
Please assist. Thanks, Randy

Disk space being reported differently for same size drives?

I have a 1TB drive inside my computer. I have a 1TB external drive for Time Machine backups. I have a 2TB external drive for videos. I know Apple changed the way Snow Leopard calculates disk/file size to base 10, from base 2.
My internal 1TB drive is reported as 999.86GB. My external 1TB drive is reported as 999.87GB. My external 2TB drive is reported as 2TB. Why are the two 1TB drives being reported as less than 1TB, and at different sizes, while my external 2TB drive is being reported as 2TB in base 10 [properly, according to Snow Leopard]? If Snow Leopard is calculating sizes using base 10, shouldn't both 1TB drives show as 1TB each?

"what drive manufacturer advertises a 1TB drive not as 1TB?"
I don't know, that's not what I said anyway. I said drives may vary slightly in size due to different
cylinder/head layouts which may affect overall gross size, which would also affect formatted size.
Bear in mind that Apple's GUID partition scheme eats up more space than APM or MSDos partition
schemes. In fact given the size you quoted, (999.86), if you had used an Apple Partition Map (APM)
partition, the Volume size would have been more than 1000GB, but drive manufacturers don't
guarantee formatted drive size in any case. They only go by raw unformatted drive size, which in
your case would be about 1,000,204,886,016 Bytes before formatting using the GUID partition
table (GPT) scheme. That being the case (and it is), this case is indeed closed is it not?
Kj ♘

Why are DWDM XFP tunables reporting incorrect wavelength channels?

Why are the channel numbers output from "show controllers tenGigE <port> phy" reporting incorrect channels?
I have seen this in IOS XR 4 and 5 now. The channel is incorrect but the tuned wave is correct and the channel appears correct in the configuration.
I searched for caveats but found nothing... Am I just overlooking something?
RP/0/RSP0/CPU0:ios(config)#int tenGigE 0/1/0/0
RP/0/RSP0/CPU0:ios(config-if)#shut
RP/0/RSP0/CPU0:ios(config-if)#controller dwdm 0/1/0/0
RP/0/RSP0/CPU0:ios(config-dwdm)#admin-state maintenance
Wed Mar 5 11:29:49.698 UTC
Maintenance will be Forced one if it is disabled for this port. You may first verify the status by the show interfaces command.
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:29:50.818 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#wavelength 55
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:29:58.577 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#admin-state in-service
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:30:05.217 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#int tenGigE 0/1/0/0
RP/0/RSP0/CPU0:ios(config-if)#no shut
RP/0/RSP0/CPU0:ios(config-if)#commit
Wed Mar 5 11:30:13.810 UTC
RP/0/RSP0/CPU0:ios(config-if)#exit
RP/0/RSP0/CPU0:ios(config)#exi
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios#show controllers tenGigE 0/1/0/0 phy | begin Signal
Wed Mar 5 11:30:32.570 UTC
        Signal Condition Control: Normal Async REFCLK,
        Thresholds:                    Alarm High         Warning High          Warning Low            Alarm Low
              Temperature:               73.000                70.000                -5.000                -8.000
                  Voltage:           0.000 Volt            0.000 Volt            0.000 Volt            0.000 Volt
                     Bias:         85.000 mAmps          72.000 mAmps          10.000 mAmps           5.000 mAmps
           Transmit Power: 3.981 mW (6.00 dBm)   2.512 mW (4.00 dBm)   0.794 mW (-1.00 dBm)   0.501 mW (-3.00 dBm)
            Receive Power: 0.398 mW (-4.00 dBm)   0.251 mW (-6.00 dBm)   0.002 mW (-27.96 dBm)   0.001 mW (-30.00 dBm)
        Laser First Frequency: 191 THz, 950.000 GHz
        Laser Last Frequency: 196 THz, 0.000 GHz
        Laser Min Grid Spacing: 50.000 GHz
        Wavelength Control: setpoint=1550.05 nm, error=0.00 nm
        FEC Control: amplitude_threshold=50.00%, phase_setpoint=50.00%
        Temperature: 42.949
        Voltage: 0.000 Volt
        Tx Bias: 20.654 mAmps
        Tx Power: 1.413 mW (1.50 dBm)
        Rx Power: 0.000 mW (<-40.00 dBm)
        Control Status: Module NR, Interrupt, Rx LOS, Rx not ready, Rx CDR not locked,
        Wavelength Channel: 30
        Wavelength Error: 0.000 GHz

1)
CLI configures XR Channel.
'wavelength 55' maps to Wavelength '1550.116 nm'
The following CLI gives CLI mapping to Wavelength (nm).
RP/0/RSP0/CPU0:RR03#sh controllers dwdm 0/1/0/0 wavelength-map
55 6 193.40 1550.116
2)
SW translates configured 'wavelength <channel number>' to
Optics Channel number (30) to get Wavelength 1550.05 nm.
RP/0/RSP0/CPU0:ios#show controllers tenGigE 0/1/0/0 phy | begin Signal
Laser First Frequency: 191 THz, 950.000 GHz
        Laser Last Frequency: 196 THz, 0.000 GHz
        Laser Min Grid Spacing: 50.000 GHz
        Wavelength Control: setpoint=1550.05 nm, error=0.00 nm
        FEC Control: amplitude_threshold=50.00%, phase_setpoint=50.00%
        Temperature: 42.949
        Voltage: 0.000 Volt
        Tx Bias: 20.654 mAmps
        Tx Power: 1.413 mW (1.50 dBm)
        Rx Power: 0.000 mW (<-40.00 dBm)
        Control Status: Module NR, Interrupt, Rx LOS, Rx not ready, Rx CDR not locked,
        Wavelength Channel: 30
        Wavelength Error: 0.000 Ghz
3)
Instead we recommend our customers to use the following CLI which gives option to
Configure wavelength in 'nm'.
RP/0/RSP0/CPU0:RR03(config-dwdm)#wavelength update ?
<1528773-1568362> Enter 7-digit Wavelength data; e.g. 1532290 for 1532.29 nm
Available wavelength is given by this CLI.
RP/0/RSP0/CPU0:RR03#sh controllers dwdm 0/1/0/0 wavelength-map

FRSM Randomly Reports Incorrect Quota Usage

We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
Any ideas?

Hi,
Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
FSRM usage quota incorrect after deletion of 'RECYCLER' folder
http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Title reports and mortgage being reported twice to credit bureaus.

Our mortgage company, Bank of America, is reporting our mortgage to the credit bureaus twice making it appear that we owe twice as much as we do. Everything is the duplicate reports including the account numbers. My husband contacted BOA to have it fixed but they said something about a title report. I wasn't there to hear the conversation and BOA lost the letter that permits me to talk to them (again). Does anyone know what a title report would have to do with our mortgage being reported twice? How can they not know how many accounts we have, we only make one payment a month. Any help you can give would be greatly appreciated. We are trying to get everything straightened out so we can buy a new home.

I've been combing these forums and think I found the real problem. I believe our equity line is being reported as revolving credit. A friend was starting a business and talked us into refinancing our second, smaller mortgage in '08 before the market crashed. It sounded good, we got a better interest rate, a little bit of a credit line, and a tax write-off. Plus we were helping her get her business started. But the credit line was frozen when the housing market imploded and lenders started to panic. We didn't think twice about it because we really didn't need it and I have been paying the interest plus a little more every month. I honestly never worried about it because we'd pay it off when we sold the house. We only have 2 credit cards now, both have zero balance and about a $4,500 combined limit. The equity line is for $20,000 (although we only had about $3,000 available to spend and pay back, I guess the rest was the mortgage that was transferred over). According to the credit report we have a $20,000 limit and owe about $16,500. So basically, despite the fact that we have no credit card debt and this is essentially a mortgage, the credit bureaus sees our debt to credit ratio as 67%!!!
I can't believe the mortgage lenders didn't catch this. I'm absolutely sick over it. Ironically, if we sell the house the equity line will be paid off lowering our debt ratio. But we'll be homeless until his credit rating goes up so we can buy a new place. Is there anything we can do?

Portal component information reporting incorrect version

Dear all,
Has anyone experienced that the portal content information (http://hostname:port/monitoring/ComponentInfo)is reporting incorrect information? We have installed XSS 603 components and the summary part does not reflect that , but the details does.
Its also not reporting SAPPCUI_GP in the software component part. Has anyone seen this and whats the fix?
Thanks!
Neeta

HI Shanti,
I followed the intructions in note # 910073 and all worked fine. However, the version information is still not reported correctly. component information is reporting ESS600 and we have ESS603 installed & no PCUI component is reported but the details show that its deployed.?
Does the portal need to be restarted after the change in note 910073?
Regards, Neeta

Do the burning problems that are being reported lately

Dear All,
Do the burning problems that are being reported lately, affect itunes version 7.5 or lower on Win XP Home?
System specs:
HP pavilion a450n
Win XP Home
512 ram
128mb graphics card
Message was edited by: Cnon
Message was edited by: Cnon

Cnon wrote:
CasperGemini wrote:
Error messages from burning CD's are caused by a variety of reasons. Are you having trouble burning a CD in iTunes on your PC? If so, let us know the error code that you're getting. If you are trying to determine if you will have trouble buring a CD, the best suggestion is to just try it and see what happens.
CG
Dear All,
My cd burned fine, thanks
Cnon
It's playing fine in my player too
Thanks all
Cnon

Uptime being reported incorrectly

Similar Messages

Maybe you are looking for