Upward swipe is not registering in iOS7 to bring up control center

Hi there. Basically, I just recently installed iOS7 on my iPhone 4. So far everything has been working really well, except for the control center. This is not related to that other security bug. My problem is, swiping upward on the phone works less than half the time to bring up the control center. I generally have to make an upward swiping motion four or five times before the control center goes up. It's just, odd. Notification center and spotlight respond perfectly to my swipes. I've even held the phone upside to see if maybe swiping toward me was just easier for the phone to interpret. No dice. Three other people I know have this exact same problem, all of them with iPhone 4. Has anyone else had this problem or now how to fix it? I've tried turning my phone on and off, I've let it run down and then recharged it, still the problem persists.

I had this problem also. First thing I tried was to reset your device.
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. That seemed to help.
But then I discovered that a light swipe starting just off the screen at the bottom worked well.
When I tapped and swiped on the screen I often did not get the Control Center to come up. But after practicing some with a swipe beginning just off the bottom of the screen I get the Control Center to come up every time.

Similar Messages

  • Upgraded to ios7 on iphone4. Swipe up to bring up control center wont work. Turned optins on and off restarted phone.  No luck .  Any ideas

    Upgraded iphone 4 to ios7.  Swipe up to get control center works when it feels like it, which is seldom. I have turned options on and off, restarted the phone, no go. Btw, swipe down on lock screen to see events no good as well.  Any ideas.

    I had this problem also. First thing I tried was to reset your device.
    Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. That seemed to help.
    But then I discovered that a light swipe starting just off the screen at the bottom worked well.
    When I tapped and swiped on the screen I often did not get the Control Center to come up. But after practicing some with a swipe beginning just off the bottom of the screen I get the Control Center to come up every time.

  • Ios7 and bug of control center for bypassing the unlock procedure

    step 1 - open control center.
    step 2- launch for example calculator.
    step 3- push the home button.
    result: the iPhone is full unlocked!!!!

    No, you can't bypass the passcode that way. You probably have your passcode set for a delay. Unless you have your passcode set for Immediatly, the screen will mostly go to sleep ("Autolock") before the phone locks. The default time for the phone to go to sleep is 1 minute. The default time for the passcode to kick in is 15 minutes. So, in those 14 minutes, the phone is not passcode locked. That's the way it's supposed to work.  If you set the passcode to kick in as soon as the phone goes to sleep, the steps you outline do NOT let you bypass the lock code. I've verified this on my iPhone and iPad.
    Best of luck.

  • Problem with registering device in Sybase Control Center with SUP 2.2 SP04

    Hi,
    I have Sybase Unwired Platform SP04, and I am trying to register my Android device in Sybase Control Center. I registered application connection with HWC as a template. I also installed 2 Sybase apps from Google Play Store on my Android device - Sybase Hybrid Web Container and Sybase Mobile Workflow 2.1. When I tried connecting to Sybase Control Center from my Android device using Sybase Mobile Workflow 2.1, there were no log updates at all. I entered IP address of my computer where I installed SUP   as server name. It seemed like Sybase Mobile Workflow 2.1 did not work at all on my Android device.  However, there are some log messages when I try to connect to SCC through Sybase Hybrid Web Container - "Engine Startup", "Queued Settings Request", "Communication Error".
    I was able to successfully register my Android Emulator on SCC using Hybrid Web Container app and test my hybrid web app. What could be the reason for not being able to register a real device on SCC? Is this the wrong Sybase app used on the device? Or some kind of network issue? Both my android device and my computer are connected to the same home WiFi network and have 192.168.x.y IP addresses, which are local IP addresses accordng to my knowledge.
    I was told that if I am unable to open SCC on the device by typing https://<IP_address>:8283/scc in a browser, then my device won't be able to access SCC. And, in fact, my Android device cannot open SCC in its browser, while my Android emulator can.
    I have tried using USB or WiFi tethering to so that my laptop actually uses exactly the same Internet connection as my Android phone, but this didn't help either. If someone has any idea on how to fix this, your help will be appreciated!
    - Jake Alexander

    When I open that page on my device's browser, it says that my browser couldn't connect to it.
    I don't think my Firewall blocks port 5001, because I have never set it to do it, and I don't see any outbound or inbound rules on my Windows Firewall to block port 5001. I don't think that my WiFi network would block port 5001, but I can't be sure of it. However, I was told that if I create a portable WiFi hotspot and connect my computer with SUP on it    to the hotspot, then my computer and Android device would be on the same network even without Internet Connection, and I would be able to connect to SCC on my device, However, even in this case it did not work.
    Thanks,
    Jake

  • Control Center Jobs - Workflow execution history not being shown

    Hi all gurus,
    We have recently migrated to owb 11.2 from 10.2. In DEFAULT_CONTROL_CENTER, we can see deployment history, but the "execution" tab is empty. Though we have executed several workflows, they are not shown in the execution TAB in "Control Center Jobs" window after they complete.
    Any clue on what can be the problem? Where can I further investigate the problem?
    Thanks you so much,
    Inaki.

    Is there any record in wb_rt_audit_executions? you can connect as OWBSYS, then set workspace to access the audit information.
    If there are records and not displayed in the execution tab, then it must have some issues. Then should be looked into further.
    Thanks,
    Shawn

  • TMS 14.4.1 snapshots in Monitoring Conference Control Center not updating

    Snap shots in the Conference Control Center are not updating.
    We are using TMS 14.4.1, Java 7 update 51 on the server.
    All are C-Series (c20 or c60) endpoints running version TC7.1.4 bridged with an MCU (MSE 8510)
    All end points have web snapshot enabled
    I have tried using Java 7, update 51 and the current version on the Windows 7 desktop.

    Hi Patrick,
    We don't have a conductor, so that may be one point of difference between yours and mine, but the original poster didn't mention any conductor or MCU, and his screen grab looks like a simple point to point call.
    There were issues in versions of TMS prior to 14.4 with the websnapshots in CCC - this is mentioned in the release notes as an "other change": "Enabled Conference Control Center snapshots for systems running Cisco TelePresence TC software version 6 and later."
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • Iphone6 control center not pulling up

    I have an iPhone 6 and the control center almost never allows me to pull it up from the bottom of the screen. I have tried all settings turning them on and off. Restarting, everything I can think off with no luck. Sometimes works but more often not working than actually working. anyone else? Any ideas to fix?

    I'm having this same issue on my iPhone 6. I can't seem to consistently pull up the control center from the bottom. I've never really had an issue with this as I've always used this feature once it's been introduced in previous iphone versions.
    I noticed that it is equally difficult to bring the notification down. Also, it seems it's dependent on the app that is being used at the moment. I find it particularly difficult when I am reading a book and try bring the control center up. Anyone else having issues with this?

  • IOS7 Control Center Swipe Multiple Times

    Having to swipe 'up' my IOS7 control center multiple times (5-10x common). Sometimes it will not come up at all. Is anyone esle having similiar issues?
    I have rebooted the iPad which has helped but overall performance is the swiping i find annoying and often doesn't work.
    Anyway to change settings to use the old IOS6 whereby you can double-click the home button and have contol center pop-up

    Screen is clean. I will take off the protective cover....maybe it is covering the sensitive area.

  • KABA connection issue - program not registered

    I am trying to troubleshoot a connection error between SAP and KABA.  I have the RFC created in SAP and when I test the connection I get a program not registered.  The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating).  We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error.  Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP?  Any assistance would be appreciated.

    Hi,
    In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
    http://<serverhostname>:<port>/CmcApp
    After logging in Select the Authentication and SAP as authentication type.  Regarding how to configure, follow the configuration steps mentioned in the below article:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
    Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
    Now, verify the RFC in the BW system.
    Regards,
    Noor.

  • Help: can not regist application in HP-UX 11.0

    My application work fine in iAS SP3 for Win2000, but when I deployed it to
    HP-UX 11.0, It can not regist the application in HP-UX.
    can any onr help me, thanks
    Lu yanqiang
    the error message is:
    HotSpot VM warning: Setting of property "java.compiler" is ignored
    creating engine class space...
    loading jx2util...
    loading jx2util...done
    Connected to LDAP server on websvr.sh-catcher.com port 389
    com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
    constructer called
    com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
    com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
    ECS initializing engine class loader instance.
    com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
    initGDSKey: GDSKey_Base
    initGDSKey- just put : com.kivasoft.IGDSKey_Base
    key=com.kivasoft.gds.GDSKey@41cd1f
    initGDSKey: GDSKey_Root
    initGDSKey- just put : com.kivasoft.IGDSKey_Root
    key=com.kivasoft.gds.GDSKey@31f71a
    initGDSKey: GDSKey_Current
    initGDSKey- just put : com.kivasoft.IGDSKey_Current
    key=com.kivasoft.gds.GDSKey@5601ea
    initGDSKey: GDSKey_CurrentEngine
    initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
    key=com.kivasoft.gds.GDSKey@17d257
    context= com.kivasoft.context.Context@6ee36c
    resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
    resolve value: /opt/iplanet/ias6/ias/APPS
    resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
    java.;com.kivasoft.;gx.
    resolve value:
    java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
    l.
    resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
    com.kivasoft.engine.IVersionable
    property not in GDS
    resolve value: com.kivasoft.engine.IVersionable
    resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
    property not in GDS
    resolve value: 0
    resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
    property not in GDS
    resolve value: 10
    resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
    SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
    property not in GDS
    resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
    resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
    SYSTEM_JAVA javax.servlet.Servlet
    property not in GDS
    resolve value: javax.servlet.Servlet
    class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
    loading component...{7ee76a00-a999-11d1-a16f-006097594151}
    getting threadLocal obj
    loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.thread.ModuleThread
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.thread.ModuleThread appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.thread.ModuleThread
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.thread.ModuleThread loaded by primordial CL
    registered module... com.kivasoft.IModuleThread
    loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderJ
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.bind.BinderJ
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
    loaded by primordial CL
    loading component...{ed049d80-b936-1548-e481-080020721767}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.eb.EJBBinder
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.eb.EJBBinder
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
    loaded by primordial CL
    EJBBinder: binder is GOOD..
    EJBBinder: context set obj for IID_IGXEBBinder
    loading component...{a84f0507-a912-11cf-aa6c-524153480000}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.gds.GDSModule
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.gds.GDSModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
    loaded by primordial CL
    registered module... com.kivasoft.IGDSModule
    loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
    loaded by primordial CL
    loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.principal.PrincipalModule
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.principal.PrincipalModule appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.principal.PrincipalModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.principal.PrincipalModule loaded by primordial CL
    registered module... com.kivasoft.IPrincipalModule
    loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.eb.EBModule
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.eb.EBModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
    by primordial CL
    registered module... com.kivasoft.IEBModule
    The current input file= testdb.xml
    About to start xml -> descriptor conversion process
    xmlToDescriptor- file name=testdb.xml
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
    1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
    to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
    uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
    servlet name = testdb
    !!! parseWebAppFromDOM() just put in setServlet name = testdb
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
    1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
    to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
    uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
    !!! handleIASServlet(): Get servlet name= testdb
    AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
    All EnvEntries name:
    All Ejb-refs:
    All Resource-refs:
    WebApp package name = testdb
    Enter setupPluginInfoInGDS()
    creating ServletPatternTrans entry, url= /testdb
    webapp ContextRoot= null
    Enter getAllServlets,registeredServletNames.size= 0
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Enter getAllServlets,registeredServletNames.size= 0
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Enter getAllServlets,registeredServletNames.size= 0
    [01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
    --- now put Web-app component descrptor into GDS
    webAppName = testdb
    Enter getAllServlets,registeredServletNames.size= 0
    Enter getAllServlets,registeredServletNames.size= 0
    getClassDefGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getClassImpGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Now do some verification step and regenrate the web-app.xml.out file from
    GDS data
    getWebAppGDSKeyByPackageName: name to match= testdb
    got key to webapp= testdb
    enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
    About to process the <servlet-mapping> element
    GDSvalue name= /System/StaticServlet
    GDSvalue val= StaticServlet
    GDSvalue name= /System/JSPRunnerSticky
    GDSvalue val= JSPRunnerSticky
    GDSvalue name= /System/JSPRunner
    GDSvalue val= JSPRunner
    GDSvalue name= /System/FormAuthServlet
    GDSvalue val= FormAuthServlet
    GDSvalue name= /System/BasicAuthServlet
    GDSvalue val= BasicAuthServlet
    GDSvalue name= /System/CertAuthServlet
    GDSvalue val= CertAuthServlet
    GDSvalue name= /System/SessionInvalidator
    GDSvalue val= SessionInvalidator
    GDSvalue name= /fortune/fortune
    GDSvalue val= FortuneServlet
    GDSvalue name= /web/StaticServlet
    GDSvalue val= StaticServlet
    GDSvalue name= /web/JSPRunnerSticky
    GDSvalue val= JSPRunnerSticky
    GDSvalue name= /web/JSPRunner
    GDSvalue val= JSPRunner
    GDSvalue name= /web/FormAuthServlet
    GDSvalue val= FormAuthServlet
    GDSvalue name= /web/BasicAuthServlet
    GDSvalue val= BasicAuthServlet
    GDSvalue name= /web/CertAuthServlet
    GDSvalue val= CertAuthServlet
    GDSvalue name= /web/SessionInvalidator
    GDSvalue val= SessionInvalidator
    GDSvalue name= /web/AdderAlias
    GDSvalue val= AdderServlet
    GDSvalue name= /testdb/testdb
    GDSvalue val= testdb
    getServletMappingFromGDS: url= /testdb, servlet= testdb
    About to process the context-param
    [01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
    About to process the mime-mapping
    About to process the servlets
    GDSvalue name= testdb
    GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    GDSvalue name= testdb.jsp
    GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    The returned hashtable for servlets have: 2 entries
    About to process the servlet name= testdb.jsp
    About to process the servlet name= testdb
    About to process the tld
    The returned vector for taglib have: 0 entries
    Finished getting a wd from gd s!!!
    Now ready to write out WebApp xml file
    descriptorToXml: about to get all servlets
    Enter getAllServlets,registeredServletNames.size= 2
    DescriptorManager.getServletByGuidStr, ctx=
    com.kivasoft.context.Context@6ee36c
    Enter getServletFromGDS
    getClassDefGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
    load-on-startup value from GDS= 0
    number-of-singles value from GDS= 10
    DescriptorManager.getServletByGuidStr, ctx=
    com.kivasoft.context.Context@6ee36c
    write Xml to output file: web.xml.out
    Finished writing out j2ee xml file
    Enter getAllServlets,registeredServletNames.size= 2
    write Xml to output file: ias-web.xml.out
    Finished writing out IAS xml file
    Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
    Processing input WAR 1
    Processing input WARi 21 testdb.xml
    Encountered exception java.util.zip.ZipException processing input file testd

    Hi,
    What is the version of app server on HP UX ? How did you deploy on the app
    server in HP UX using command line deployment or GUI tool ? Where are these
    errors shooting from, are these coming at the time of deployment or thrown at
    runtime ? What is the application type that you are trying to deploy ?, if
    possible send me the kxs and kjs log files please.
    Regards
    Raj
    lu yanqiang wrote:
    My application work fine in iAS SP3 for Win2000, but when I deployed it to
    HP-UX 11.0, It can not regist the application in HP-UX.
    can any onr help me, thanks
    Lu yanqiang
    the error message is:
    HotSpot VM warning: Setting of property "java.compiler" is ignored
    creating engine class space...
    loading jx2util...
    loading jx2util...done
    Connected to LDAP server on websvr.sh-catcher.com port 389
    com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
    constructer called
    com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
    com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
    ECS initializing engine class loader instance.
    com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
    initGDSKey: GDSKey_Base
    initGDSKey- just put : com.kivasoft.IGDSKey_Base
    key=com.kivasoft.gds.GDSKey@41cd1f
    initGDSKey: GDSKey_Root
    initGDSKey- just put : com.kivasoft.IGDSKey_Root
    key=com.kivasoft.gds.GDSKey@31f71a
    initGDSKey: GDSKey_Current
    initGDSKey- just put : com.kivasoft.IGDSKey_Current
    key=com.kivasoft.gds.GDSKey@5601ea
    initGDSKey: GDSKey_CurrentEngine
    initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
    key=com.kivasoft.gds.GDSKey@17d257
    context= com.kivasoft.context.Context@6ee36c
    resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
    resolve value: /opt/iplanet/ias6/ias/APPS
    resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
    java.;com.kivasoft.;gx.
    resolve value:
    java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
    l.
    resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
    com.kivasoft.engine.IVersionable
    property not in GDS
    resolve value: com.kivasoft.engine.IVersionable
    resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
    property not in GDS
    resolve value: 0
    resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
    property not in GDS
    resolve value: 10
    resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
    SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
    property not in GDS
    resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
    resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
    SYSTEM_JAVA javax.servlet.Servlet
    property not in GDS
    resolve value: javax.servlet.Servlet
    class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
    loading component...{7ee76a00-a999-11d1-a16f-006097594151}
    getting threadLocal obj
    loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.thread.ModuleThread
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.thread.ModuleThread appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.thread.ModuleThread
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.thread.ModuleThread loaded by primordial CL
    registered module... com.kivasoft.IModuleThread
    loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderJ
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.bind.BinderJ
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
    loaded by primordial CL
    loading component...{ed049d80-b936-1548-e481-080020721767}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.eb.EJBBinder
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.eb.EJBBinder
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
    loaded by primordial CL
    EJBBinder: binder is GOOD..
    EJBBinder: context set obj for IID_IGXEBBinder
    loading component...{a84f0507-a912-11cf-aa6c-524153480000}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.gds.GDSModule
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.gds.GDSModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
    loaded by primordial CL
    registered module... com.kivasoft.IGDSModule
    loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
    loaded by primordial CL
    loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.principal.PrincipalModule
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.principal.PrincipalModule appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.principal.PrincipalModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class
    com.kivasoft.principal.PrincipalModule loaded by primordial CL
    registered module... com.kivasoft.IPrincipalModule
    loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.bind.BinderBase
    com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
    PCL cache
    loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
    getting threadLocal obj
    com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
    com.kivasoft.eb.EBModule
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
    appears to be a core class
    com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
    com.kivasoft.eb.EBModule
    com.kivasoft.engine.EngineClassLoader: Entering
    loadClass_primordial(className)
    com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
    by primordial CL
    registered module... com.kivasoft.IEBModule
    The current input file= testdb.xml
    About to start xml -> descriptor conversion process
    xmlToDescriptor- file name=testdb.xml
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
    1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
    to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
    uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
    servlet name = testdb
    !!! parseWebAppFromDOM() just put in setServlet name = testdb
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
    1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
    uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
    to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
    uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
    Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
    file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
    !!! handleIASServlet(): Get servlet name= testdb
    AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
    All EnvEntries name:
    All Ejb-refs:
    All Resource-refs:
    WebApp package name = testdb
    Enter setupPluginInfoInGDS()
    creating ServletPatternTrans entry, url= /testdb
    webapp ContextRoot= null
    Enter getAllServlets,registeredServletNames.size= 0
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Enter getAllServlets,registeredServletNames.size= 0
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Enter getAllServlets,registeredServletNames.size= 0
    [01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
    --- now put Web-app component descrptor into GDS
    webAppName = testdb
    Enter getAllServlets,registeredServletNames.size= 0
    Enter getAllServlets,registeredServletNames.size= 0
    getClassDefGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getClassImpGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    Now do some verification step and regenrate the web-app.xml.out file from
    GDS data
    getWebAppGDSKeyByPackageName: name to match= testdb
    got key to webapp= testdb
    enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
    About to process the <servlet-mapping> element
    GDSvalue name= /System/StaticServlet
    GDSvalue val= StaticServlet
    GDSvalue name= /System/JSPRunnerSticky
    GDSvalue val= JSPRunnerSticky
    GDSvalue name= /System/JSPRunner
    GDSvalue val= JSPRunner
    GDSvalue name= /System/FormAuthServlet
    GDSvalue val= FormAuthServlet
    GDSvalue name= /System/BasicAuthServlet
    GDSvalue val= BasicAuthServlet
    GDSvalue name= /System/CertAuthServlet
    GDSvalue val= CertAuthServlet
    GDSvalue name= /System/SessionInvalidator
    GDSvalue val= SessionInvalidator
    GDSvalue name= /fortune/fortune
    GDSvalue val= FortuneServlet
    GDSvalue name= /web/StaticServlet
    GDSvalue val= StaticServlet
    GDSvalue name= /web/JSPRunnerSticky
    GDSvalue val= JSPRunnerSticky
    GDSvalue name= /web/JSPRunner
    GDSvalue val= JSPRunner
    GDSvalue name= /web/FormAuthServlet
    GDSvalue val= FormAuthServlet
    GDSvalue name= /web/BasicAuthServlet
    GDSvalue val= BasicAuthServlet
    GDSvalue name= /web/CertAuthServlet
    GDSvalue val= CertAuthServlet
    GDSvalue name= /web/SessionInvalidator
    GDSvalue val= SessionInvalidator
    GDSvalue name= /web/AdderAlias
    GDSvalue val= AdderServlet
    GDSvalue name= /testdb/testdb
    GDSvalue val= testdb
    getServletMappingFromGDS: url= /testdb, servlet= testdb
    About to process the context-param
    [01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
    About to process the mime-mapping
    About to process the servlets
    GDSvalue name= testdb
    GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    GDSvalue name= testdb.jsp
    GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    The returned hashtable for servlets have: 2 entries
    About to process the servlet name= testdb.jsp
    About to process the servlet name= testdb
    About to process the tld
    The returned vector for taglib have: 0 entries
    Finished getting a wd from gd s!!!
    Now ready to write out WebApp xml file
    descriptorToXml: about to get all servlets
    Enter getAllServlets,registeredServletNames.size= 2
    DescriptorManager.getServletByGuidStr, ctx=
    com.kivasoft.context.Context@6ee36c
    Enter getServletFromGDS
    getClassDefGDSKeyByGuid: name to match=
    {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
    BaseKey= com.kivasoft.gds.GDSKey@41cd1f
    getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
    load-on-startup value from GDS= 0
    number-of-singles value from GDS= 10
    DescriptorManager.getServletByGuidStr, ctx=
    com.kivasoft.context.Context@6ee36c
    write Xml to output file: web.xml.out
    Finished writing out j2ee xml file
    Enter getAllServlets,registeredServletNames.size= 2
    write Xml to output file: ias-web.xml.out
    Finished writing out IAS xml file
    Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
    Processing input WAR 1
    Processing input WARi 21 testdb.xml
    Encountered exception java.util.zip.ZipException processing input file testd

  • Gateway error - Program not registered

    Hello,
    We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
    LOCATION    SAP-Gateway on host gisrxx / sapgw00
    ERROR       program SBCX not registered
    It's an ECC 6.0 system.
    I found SAP note - - 353597 - Registering a RFC program
    I executed the following command as sidadm
    rfcexec -aSBCX -ggisrxx -xsapgw00
    But the command keeps on running on teh command prompt.
    And for that duration the RFC works.
    But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
    Could you tell what needs to be done to resolve this issue?
    Regards,
    Gautam.

    Hi Gautam,
    Please run the program in background (Unix) or as a service (Windows).
    Please go through the following forum post. This should help.
    Run rfcexec as service on windows
    Br,
    Venky

  • RFC : Transaction Program not Registered

    Hi Folks,
    We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
    The solution was working for months and suddenly connectivity is broken.
    To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
    But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
    RFC trace shows
    ERVER> Caller transaction code:  (Caller Program: SAPLQOWK)
    ERVER> Called function module: ARFC_RUN_NOWAIT
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered.
    Please let me know for any inputs.
    Thanks, Suraj

    My problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
    To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
    Thanks, Suraj

  • TREX7.1 - Program not registered

    Hi to all experts,
    I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
    I have tried the following methods:
    1. removed TREX and reinstall it again.
    2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
    Thanks in advance.
    BR,
    Nancy

    Hi to all experts,
    Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
    Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
    --> Check 01: Ping TREX Services
    ++----
    ++----
    ++----
    STEP  ³³ ACTION              ³³ SPECIFICATION                ³³ RESULT
    ++----
    ++----
    ++----
    ++----
    ++----
    ++----
    Traceback (most recent call last):
      File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
        ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
      File "runInstallationTest.py", line 710, in runHandler
        TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
      File "runInstallationTest.py", line 275, in ping
        services = HostPort4Services().getHostPort4Services()
      File "runInstallationTest.py", line 88, in __init__
        self.srvs = Services().getServices()
      File "runInstallationTest.py", line 69, in getServices
        content = Content('TREXDaemon.ini')
      File "runInstallationTest.py", line 33, in __init__
        self.content = self.getContent()
      File "runInstallationTest.py", line 42, in getContent
        raise RETURN_CODE(2, msg=msg)
    RETURN_CODE: RC_NO_SETTINGS
    No SAP_RETRIEVAL_PATH set in environment.
    ---> TEST ABORTED !!!
    Is this test run very important? Any idea what is this problem about?
    Many thanks in advance!
    BR,
    Nancy

  • SAPSLDAPI_UNICODE program not registered

    Hi,
    Iam making RFC unicode connetion in XI3.0 , i gave corect deatils when i test connection system gives error" program not registered".
    But when i execute LCRSAPRFC_UNICODE its success.Not sure why SAPSLDAPI_UNICODE giving error. I have maitained the entrys in visual administrator. Even then same problem
    1.      Execute transaction SM59 in the business system.
           2.      Choose Create.
           3.      Enter at least the following:
    ¡        RFC destination: SAPSLDAPI
    ¡        Connection type: T
    ¡        Description: SAPSLDAPI
            4.      Choose ENTER.
           5.      Choose the Technical settings tab page and do the following:
                                a.      In the Program ID field under Registered Server Program, enter SAPSLDAPI _UNICODE.
    Please suggest for this connection.
    -Cheers

    Also..in the Visual administrator see that the destination details are correct....it doesnot seem as if the program got registered to the sap gateway.....
    From the Visual Administrator for the destination, pls do a Save & Test...
    Thanks,
    Renjith

  • RFC Error: Program not registered

    Hi,
    We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    User: TESTUSER (Client: 202)
    Destination: SEEBURGER_RFC (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    DEST =SEEBURGER_RFC
    HOST =%%RFCSERVER%%
    PROG =BIS_ABC_202_DEV
    GWHOST =ABC.XYZ.STU.com
    GWSERV =sapgw15
    I have checked RFC connection is fine. Also production systems connection are working fine.
    Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
    Thanks & Regards,
    Manish

    Hi Sunny,
    Thank you  for your suggestion, actually we have tried registration using rfcexec and it works fine.
    BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
    Thanks and Regards,
    Nick

Maybe you are looking for