Urg: How to have a newly created BMM layer column to hold 3 differt values.

HI Team
I have 3 different columns i.e 7 days ago , last month , last 2 month. I have a requirement of creating a single column to hold this three different values.How do i achieve this.
Regards

Hi,
Thanks for awarding.
This can be achieved by building a intermediate report.
First, you need to create a intermediate report with the original Time column and one more same time column but with calculations for the past 7 days.
Secondly, you need to create a prompt for the Time and make a presentation variable and refer it in the intermediate report. And make the original Time column equal to the presentation variable.
Thirdly, you need to create the main report with the Time column and fact measure column. Time Column should refer to the intermediate column value (ie ' is based on results of another analysis').
Place the prompt, intermediate report and main report and check this will work for sure.
Similarily, create intermediate reports for other calculations and refer them in the main report.
Hope this surely helps.
Regards
MuRam
Edited by: MuRam on Dec 21, 2011 9:26 AM

Similar Messages

  • How to Apply a Newly Created Access Policy on Existing Users in OIM????????

    How to Apply a Newly Created Access Policy on Existing Users in OIM?
    When the rule is getting failed the user is getting removed from the group but resource is not getting revoked. This is happening only for the old uses..for the users which i created now it working fine..i mean its resource is getting revoked.
    (Retrofit access policy" is checked on the Access Policyand Revoke if not longer applied is checked.)
    For the old users i see the POl_Key is null, for new users i see a value '10'. So i updated the pol_key for old users same as it got generated for new users '10'.
    i even updated the form version too but still revoke doesn't work.
    I cant go for the below approach..
    In order to apply a newly created Access Policy on existing users, one has to make sure that:
    1) "Retrofit access policy" is checked on the Access Policy.
    2) Then run the "Set User Provisioned Date" Schedule task to apply the Access Policy on the existing users in OIM.
    Note: After 9.1.0.1 BP03 the access policy execution has been moved to a new scheduled task "Evaluate User Policies" as mentioned inDocument 839368.1 :How to Use Access Policies to Provision with Groups.
    Is there any other approach i can try.. if you have any idea please reply me asap
    Thanks..

    Thanks for the reply kevin..
    We decided to try the Schedule task (Set User Provisioned Date).
    But i see one problem here after seeing this post in metalik --> Can Access Policies Manage The Life-cycle Of Users Created via Reconciliation? [ID 1136540.1]
    According to this post Access Policies framework does not manage users who are obtained either through trusted reconciliation or target reconciliation.
    Is there any custom way to achieve this??
    How does the access policy framework revoke resource work? (revoke if no longer applies)??
    Edited by: IDMuser19 on Jun 21, 2011 11:43 PM

  • How can i add newly create infotype in t.code po13

    Can any one pl tel me how can i view newly created infotype in t.code PO13
    Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

    See:
    Mac OS X Automation,
    Automated Workflow Tips,
    Introduction to Automator tutorial, and
    a four-parter on Automation in Snow Leopard by Sal Saghoian:
    Snow Leopard Services,
    Services for iPhoto,
    Safari and WebKit integration, and
    Installing and using services.
    Finally, 
    Developing AppleScript Applications and
    Apple's Automator Developer Documentation

  • How to get the Newly Created Material

    Hi all,
    Iam creating Materials using BDC sessions method,My Problem is to update the Newly Created Material in a Ztable.
    so iam getting the Newly created Matnr by the following peice of code
        SELECT  matnr FROM mara INTO  TABLE v_matnr
                               WHERE ersda = sy-datum
                               ORDER BY matnr DESCENDING.
    But the thing is,we are getting Previously created material.i.e the new material will be  created only after the sessions are processed,but when i write the above code in the program we are getting previous material.
    so how to update the newly created material.
    I think we can't do  that through program because we can get new material only after processing the session..so what is the solution for this.should we use userexits for getting the newly created material.
    thanks in advance
    balaji

    Hello,
    Use the <b>BAPI_MATERIAL_SAVEDATA</b> to create the materials.
    The BAPI will return the Material number which is created at that instance by which u can update the ZTABLE.
    Vasanth

  • Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    >> then I get a completely blue screen.
    That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
    And sure enough, your video card driver is almost 2 years out of date.
    Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

  • How to view your newly created webservice in dynamo administrator??

    hi everyone,
    i newly created a webservice for getGiftlistId and i can successfully see that in my dynadmin webservice Registry . but when it comes to accessing that getGiftlistId.wsdl i could not able to find the URL fo the same. For example we have a webservice for getInventory , we can access the wsdl with a URL http://hostname:port/commerce/inventory/getInventory?WSDL.
    getInventory is a pre-built ATG webservice. so we can access directly with the above given URL. how can i access my getGiftlistId ??
    can anyone tell me the how that url's will be constructed???
    Thanks&Regard,
    Ravi.

    I don't know much about webservice.
    But when I generate server side code(for testing purpose) from wsdl using generate java bean skeleton option, It generates InvokeMY_SERVICE_SEIPort.wsdl.
    So to access the webservice I used following url:
         http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort - this is the wsdl file path.
    In order to view the wsdl I used following url:
         http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort?wsdl
    Thanks,
    Nitin.

  • How to add a newly created search group into portal's search functionality

    Is there a way to configure search in the portal to include a newly created search group?

    Could you please elaborate on what you are trying to do.
    What version of Portal are you using?
    What do you mean by a 'Search Group'?

  • How to have cascading lov for a single column in tabular form

    Hi,
    How to have a cascading lov for a single column in tabular form
    ie i have one employee name column
    in tabular form if v pressed add row then one row ll be added
    In my scenario based on first row value
    the second row value to be displayed
    To achieve this what i have to do ..
    Regards,
    Pavan

    READ Cascading select list on tabular form  and
    Oracle APEX 4.0: Cascading LOVs/Select Lists | Inside Oracle APEX by Patrick Wolf BLOG
    helps you,
    Pars.

  • How to create a characteristic that can hold decimal values.

    Hi,
    I want to create a characteristic which shoul be able to hold decimal values.
    Because from source system its coming in the format Number(1,1) and it should be a characteristics as per my
    business requirement.
    Please give me the solution if u know.
    Thanks,
    Vijaya

    Hi,
    it depends on your requirements... there are two possibilities
    1. type CHAR - displays the values as they are coming from source system, but I do not think any further calculations will be possible
    2. type NUMC - you can multiply each value from source system with 10 to derive an Integer value if you have format 1,1 for all records. The values will not be displayed as decimals but you can apply further calculations if needed (and divide all numeric values by 10 to transform back to correct decimal value)
    Please elaborate on your requirements, maybe you can meet your requirements using a decimal key figure...
    @Manfred
    I think type amount will be available only for key figures, not for characteristics?
    Best regards,
    Björn

  • Create a derived column based on a value within the file name

    I am importing a CSV file which is easy enough, but I have an issue where I need to manufacture a couple of column values based on the filename of the input.  So this same process will import different types of records to the same table in sql server.
     I need to pull out the record code from the file name.  
    For instance, say I can use the same package to input two different CSV files.  One is named Input_M02_Data.csv and one named Input_B15_Data.csv.  I need to create a derrived column and store the record code there (i.e.:  M02 or B15) based
    on which file it came out of.  
    fyi-
    I also need to create a second column for Dept based off of the file name as well.  M02 is dept 45 and B15 is dept 99  which I also need to insert into this table when I import the data from the .csv file.  
    Any help is greatly appreciated!

    Hi Jason,
    According to your description, you want to add two derived columns based on the file name to also insert into table. One stores the value between two “_” within file name, another stores the department based on that column.
    If in this scenario, we can add a variable FileName that stores the filename, then add the two variables as derived columns like below in the Derived Column Transformation:
    Name:
    SUBSTRING(@[User::FileName],FINDSTRING(@[User::FileName],"_",1)+1,FINDSTRING(@[User::FileName],"_",2)-(FINDSTRING(@[User::FileName],"_",1)+1))
    Dept:
    @[User::Name] =="M02"?"dept 45":@[User::Name] =="B15"?"dept 99":"dept 00"
    The following screenshot is for your reference:
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • How to cancel the newly created record

    Hi,
    I have created a record in a table, but i want to cancel that record before pressing the apply button.
    How to do this like "Clear Record' in oracle forms?
    Thanks in advance,
    SAN

    Hi,
    Use below code to delete a record in Advance table...
    AM:
    public void Delete(String dseqnum)
    Number dsequm;
    int fetchedrowcount;
    int dseqnumtodelete;
    RowSetIterator deleteIter;
    OADBTransaction tr = getOADBTransaction();
    DisconutVOImpl dvo = getDisconutVO1();
    DisconutVORowImpl row=null;
    dseqnumtodelete=Integer.parseInt(dseqnum);
    fetchedrowcount=dvo .getRowCount();
    deleteIter = dvo .createRowSetIterator("deleteIter");
    deleteIter.setRangeStart(0);
    deleteIter.setRangeSize(fetchedrowcount);
    for(int i=0;i<fetchedrowcount;i++)
    row= (DisconutVORowImpl)deleteIter.getRowAtRangeIndex(i);
    dsequm=(Number)row.getAttribute("SequenceNumber");
    if(dsequm.compareTo(dseqnumtodelete)==0)
    row.remove();
    break;
    deleteIter.closeRowSetIterator();
    Call above method in co on delete action:
    CO:
    if("Delete".equals(pageContext.getParameter(EVENT_PARAM)))
    String delete_mpid=pageContext.getParameter("MPeriodid");
    AM.Delete(pageContext, webBean,delete_mpid);
    Note:Set below properties for Delete button..
    Disable Server validation:*TRUE*
    Disable Client validation:*TRUE*
    Regards
    Meher Irk

  • How to use my newly created fonts?

    I have created a new set of fonts. saved them per letter as .eps but cannot seem to import them. The excisting libraries are .ttf ?!
    Anyone know how to get this functioning?

    Hi Jerry,
    Please refer to the following blog and check whether you followed all the steps:
    /people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
    You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
    Regards,
    Shiromani

  • How to make sure newly created row is editable by default programatically

    Hi All,
    I got a problem with creating new row in single row selection table with on click property enabled for editing mode.
    Function requirement is like: I have Mater-Detail. While creating detail lines, line has to be created with default line number. Eg: Master1 can have line numbers 1,2,3..etc, Master2 can have 1,2,3.. etc.
    In applicationTable for Pattern Create
    Action Listener=”#{CreateAndEditFiscalDocumentBean.createChargeLine}”
    In Table rowSelection="single" and editingMode="clickToEdit"
    Here the problem is:
    When I first come to the page,the first row in the detail table is editable and could able to edit any other row on click . But When I create a new row , I got a new row with line number but it is not editable.
    I want it to be editable on create and previously selected row should be read only. I have tried several ways but nothing is working.
    My observation is, when I call the bean method in Action Listener of application Table in create patteren, I am facing this problem. If I do not call this method, it is working as expected. But I need to call this method because it has to create row with line number.
    I am putting below two scenarios which I have tried. I am not successful in the both the scenarios.
    Could you please help me in achieving expected functionality.
    Many thanks in advance for your time and help.
    Scenario 1:
    Jsff:
    ApplicationTable: createActionListener="#{CreateAndEditFiscalDocumentBean.createChargeLine}"
    Table: rowSelection="single", editingMode="clickToEdit"
    Bean Code:
    public void createChargeLine(ActionEvent actionEvent) {
    FacesContext fc = FacesContext.getCurrentInstance();
    ExpressionFactory factory = fc.getApplication().getExpressionFactory();
    MethodExpression method=factory.createMethodExpression(fc.getELContext(),"#{bindings.createChargeLine1.execute}",String.class,new Class[]{});
    method.invoke(fc.getELContext(),null);
    AMImpl Code:
    public void createChargeLine() {
    ViewObject itemChargeVO = this.getFiscalDocumentCharges();
    ViewObject fiscalDocumentHeaderVO = this.getFiscalDocumentHeader();
    Row toRow = fiscalDocumentHeaderVO.getCurrentRow();
    Row newRow = null;
    Row latestRow = itemChargeVO.first();
    Integer line_number = new Integer(0);
    int numberOfItemLines = 0;
    if (latestRow != null) {
    RowSet rs = itemChargeVO.getRowSet();
    numberOfItemLines = numberOfItemLines + 1;
    if (rs != null) {
    line_number =
    (Integer)rs.first().getAttribute("LineNumber");
    while (rs.hasNext()) {
    numberOfItemLines = numberOfItemLines + 1;
    Row row = rs.next();
    if (line_number.compareTo((Integer)row.getAttribute("LineNumber")) <
    0)
    line_number =
    (Integer)row.getAttribute("LineNumber");
    line_number = line_number + 1;
    newRow = itemChargeVO.createRow();
    newRow.setAttribute("LineNumber", line_number);
    itemChargeVO.insertRowAtRangeIndex(numberOfItemLines + 1, newRow);
    itemChargeVO.setCurrentRow(newRow);
    } else {
    newRow = itemChargeVO.createRow();
    newRow.setAttribute("LineNumber", new Integer(1));
    itemChargeVO.insertRowAtRangeIndex(0, newRow);
    itemChargeVO.setCurrentRow(newRow);
    Scenario 2:
    Bean method changes:
    public void createChargeLine1(ActionEvent actionEvent) {
    Row newLine = ApplicationsTableEventHandler.getInstance().processCreate(getChargeTable());
    newLine.setAttribute("LineNumber", new Integer(1));
    }

    Hi Jerry,
    Please refer to the following blog and check whether you followed all the steps:
    /people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
    You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
    Regards,
    Shiromani

  • How to audit my newly created Roles (FINANCE MODULE)

    Hi,
    My client send me an e-mail and asked the following:
    Can you assign a user the following roles that are standard in SAP - SAP_AUDITOR_SA & SAP_AUDITOR_SA_BC (I think from memory)?
    Change them to ZSAP_AUDITOR_SA & ZSAP_AUDITOR_SA_BC.
    Can you test our finance roles with the audit user ID? Documenting the conflicts/SOD in our roles u2013 I would suggest documents it onto a spreadsheet like the unit testing one.*
    How will i test the roles that i created with the auditor user ?
    Any ideas
    Regards,
    HIral

    Just to add few points: Also try with Transaction SU98 to check the SAP Proposed Critical combination of FI Transactions. This can be checked in the table SUKRI also.
    FYI:  To run a SOD analysis for a specific combination of Authorizations, you can try with SU97. The authorization IDs you see their can be created as per your (customers choice) by report RSUSR008_009_NEW.
    Regards,
    Dipanjan

  • How to edit a newly created assignment block?

    I created a new AB and it shows up and saves values input too. However, when I open it up for editing, unlike other ABs, it does not show any buttons for editing. So I can not edit already input values. Any ideas what I am missing here? I created the view as a form type with std buttons. It is in configurable mode too.
    Regards,
    Amar.

    Hi Amar,
    yes, you need to code for the edit button. Have a look at the last lines of methode DO_PREPARE_OUTPUT() of class CL_BP_DATA_MARKETINGATTR4_IMPL.
    Also check the usage of the VIEW_GROUP_CONTEXT in method EH_ONTOEDIT().
    cheers Carsten

Maybe you are looking for