Urgeent Help: Can compressor make this...

Hi
Preparing an ad for broadcast and our AJA Kona card has let us down so no output to DigiBeta. (long story). We're distributing the ad to TV stations by satellite and the facilitiy doing this for us will accept files via ftp in the following format;
50 MB constant bit rate I Frame only MPEG-2 Program Stream direct from digital source.
Now, that's a tad tecnical. Can compressor do that and if so, what settings?
Help appreciated.
Peter

Nope. Compressor 3 goes up to 40 Mbps for any mpeg2 stream.

Similar Messages

Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Help me to make this

hi for all, i need a help to put an image and make a JFrame for ChatLogin similar to yahoo messenger chat login frame, my problem is i don't know how to arrange the instruction and how to make the image named "Face.jpg" in the upper position like keep smiling in yahoo messenger and the other labels and text Field down of this image.so plz any one help me to make this done becuse i need to know where is the problem and what should i do. thanks
import MarChat.*;
import java.awt.*;
import java.awt.BorderLayout;
import java.security.*;
import java.sql.*;
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
import java.util.Date;
public class LoginFrame extends JFrame implements ActionListener,Serializable,MessengerConstants
      String _username=null,_password=null,_server=null;
      JLabel label1,label2,label3,label4,NewAcc,ForgPassLab;
         JTextField user,server,port;
      JPasswordField password;
      JButton ok;
         ImageIcon icon;
         private LoginFrame frame;
         private byte[] DigPass;
         private byte[] ReturnPass;
         javax.swing.JButton quit, register,check;
         Container container,container1;
         Panel topPanel,centerPanel;
    private Socket s;
         public static MainFrame MainF;
         private Socket socket;
      private Thread thread;
      private DataInputStream dis;
      private DataOutputStream dos;
        // public Socket s =null;
public LoginFrame(JFrame frame)
         super("SIMSM Login Windows");
         initial();
public LoginFrame()
          super("SIMSM Login Windows");
          initial();
public void initial()
       Image iconImage = Toolkit.getDefaultToolkit().getImage("C:/SIMSM/Client/My/src/images/messengerImage.gif");
        this.setIconImage(iconImage);
         /*********Top Panel*********************/
       /* ImageIcon imageI = new ImageIcon("C:/SIMSM/client/My/src/images/Face.jpg");
        JLabel imageLabel = new JLabel(imageI);
         topPanel = new Panel(new BorderLayout());
         topPanel.add("North",imageLabel);*/
       /**********Center Panel******************/
       // centerPanel = new Panel(null);
        container = this.getContentPane();
     container.setLayout(new BorderLayout());
        container.setBackground(Color.ORANGE);
        topPanel = new Panel(new BorderLayout());
         ImageIcon imageI = new ImageIcon("C:/SIMSM/client/My/src/images/Face.jpg");
        JLabel imageLabel = new JLabel(imageI);
         topPanel.add("North",imageLabel);
         container.add("North",topPanel); // "North",topPanel);
        //container.setBackground(Color.ORANGE);
        label1= new JLabel(" Login name :");
        label1.setForeground(Color.BLUE);
     label1.setBounds(10,200,80,20);
        user= new JTextField();
        user.setBounds(100,200,130,20);
     label2= new JLabel(" Password   :");
        label2.setForeground(Color.BLUE);
        label2.setBounds(10,230,80,20);
     password=new JPasswordField();
     password.setBounds(100,230,130,20);
     label3= new JLabel(" Server          :");
        label3.setForeground(Color.BLUE);
     label3.setBounds(10,260,80,20);
        server= new JTextField("192.168.0.1");
     server.setBounds(100,260,130,20);
        label4= new JLabel(" Port               :");
        label4.setForeground(Color.BLUE);
        label4.setBounds(10,290,80,20);
     port=new JTextField(2979+"");
     port.setBounds(100,290,130,20);
     port.setEditable(false);
     ok=new JButton("Login");
        ok.setBackground(Color.RED);
        ok.setForeground(Color.YELLOW);
     ok.setBounds(40,350,80,20);
        quit = new JButton("Quit");
        quit.setBackground(Color.RED);
        quit.setForeground(Color.YELLOW);
        quit.setBounds(150,350,80,20);
     NewAcc = new JLabel("Get a new SIMSM ID......");
        NewAcc.setBounds(80,390,200,20);
        NewAcc.setForeground(Color.BLUE);
        register = new JButton("Register");
        register.setBackground(Color.RED);
        register.setForeground(Color.YELLOW);
     register.setBounds(100,420,90,20);
        ForgPassLab = new JLabel("If You Forget Your ID/Password ?");
        ForgPassLab.setBounds(60,480,200,20);
        ForgPassLab.setForeground(Color.BLUE);
        check = new JButton("Check it...");
        check.setBackground(Color.RED);
        check.setForeground(Color.YELLOW);
     check.setBounds(100,500,90,20);
        container.add(label1);
        container.add(user);
     container.add(label2);
     container.add(password);
     container.add(label3);
     container.add(server);
     container.add(label4);
        container.add(NewAcc);
        container.add(ForgPassLab);
     container.add(port);
     container.add(ok);
     container.add(quit);
        container.add(register);
        container.add(check);
     ok.addActionListener(this);
     quit.addActionListener(this);
        register.addActionListener(this);
        check.addActionListener(this);
     this.setSize(290,580);
     this.setResizable(true);
     this.setLocation(500,150);
     this.setVisible(true);
     } // end initial method
private void initDialogBox(JFrame frame)
   public void actionPerformed(ActionEvent event)
       if (event.getSource() == register)
         RegFrame r = new RegFrame();   //call class register
       // if press Quit Bouttom
       if (event.getSource()== quit)
          if(JOptionPane.showConfirmDialog(this,
                                           "Are you sure to Exit SIMS chat system?",
                                           "Exit SIMSM ",
                                            JOptionPane.YES_NO_OPTION,
                                            JOptionPane.WARNING_MESSAGE,
                                            new ImageIcon(exitIcon))== JOptionPane.YES_OPTION)
                                                 {System.exit(0);}
       if(event.getSource()== ok)
              String UserId= user.getText();
              char[] pass = password.getPassword();
              String Spass = new String(pass);
              try {
                    //sentAuthentication(UserId,Spass,s.getOutputStream());
                } catch (NoSuchAlgorithmException ex) {
                    ex.printStackTrace();
                  } catch (IOException ex) {
                             ex.printStackTrace();
              try {
                  DataInputStream in = new DataInputStream(s.getInputStream());
                  String mess = in.readUTF();
                 // in.close();
                 /* if(mess.equalsIgnoreCase("wrong password re-type it!"))
                     password.setText("");
                  else
                  if(mess.equalsIgnoreCase("wrong ID and Password Try to register"))
                      user.setText("");
                      password.setText("");
                  else*/
                   // doLogin(UserId,Spass);
                     System.err.println("Client Log in");
                     this.setVisible(false);
             } catch (Exception ex) {
                     ex.printStackTrace();
            }   //end if
            if (event.getSource() == check)
                SignInProb chekPro = new SignInProb();
public static void main(String args[])
      LoginFrame logD = new LoginFrame();
      logD.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
} //end class LoginEdited by: master2007 on Mar 8, 2008 12:05 PM

s difficult to read all those lessons because i dont have an internet connection in my homeSearch around the tutorial pages, there's a download link somewhere. You can download the whole set and read offline. **
i read most of themGood for you.
so anyone can help me with my layout plz.Well it's difficult to cover your entire learning needs on a forum -- I'm sure you realize that.
db
** 34 MB, download from
{color:0000ff}http://java.sun.com/docs/books/tutorial/information/download.html{color}
Edited by: Darryl.Burke

Can we make this query shorter....?

hi there
Can any body help me in reducing the number of lines in this query ! I am using union to concat 3 queries. Select fields in every query are same and in where condition also most of the joins are same in every query. but in where clause only two conditions are different. Can we make this 3 queries into one becoze entire select statement fields are same and most of the where conditions are same !
Below is the query:
SELECT
au1.bu_id,
au1.first_nam,
au1.last_nam,
c.id,
c.first_nam_d,
c.last_nam_d,
c.birth_dte_d,
c.ssn_num_d,
se.id schd_event_id,
seu.dsc,
ssc.dsc,
sea.access_typ,
sea.ATTENDEE_TYP
FROM
CLIENT c,
APP_USER au1,
SCHD_STAT_CD ssc,
schd_event_url seu,
schd_evnt se,
SCHD_evnt_stat ses,
SCHD_EVNT_ATTENDEE sea,
CLIENT_APPT ca
WHERE
c.id = ca.client_id_k AND
au1.bu_id = se.APP_USER_BU_ID_PRIME_K AND
ssc.code = ses.SCHD_STAT_CD_CODE_K AND
seu.code = se.SCHD_EVNT_URL_CODE_K AND
se.id = ses.SCHD_EVNT_ID_K AND
se.id = sea.SCHD_EVNT_ID_K(+) AND
se.id = ca.SCHD_EVNT_ID_K AND
sea.ATTENDEE_TYP(+) = 'WORKER' AND
ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
UNION
SELECT
au1.bu_id,
au1.first_nam,
au1.last_nam,
c.id,
c.first_nam_d,
c.last_nam_d,
c.birth_dte_d,
c.ssn_num_d,
se.id schd_event_id,
seu.dsc,
ssc.dsc,
FROM
CLIENT c,
APP_USER au1,
SCHD_STAT_CD ssc,
schd_event_url seu,
schd_evnt se,
SCHD_evnt_stat ses,
SCHD_EVNT_ATTENDEE sea,
CLIENT_APPT ca
WHERE
c.id = ca.client_id_k AND
au1.bu_id = se.APP_USER_BU_ID_PRIME_K AND
ssc.code = ses.SCHD_STAT_CD_CODE_K AND
seu.code = se.SCHD_EVNT_URL_CODE_K AND
se.id = ses.SCHD_EVNT_ID_K AND
se.id = sea.SCHD_EVNT_ID_K AND
se.id = ca.SCHD_EVNT_ID_K AND
sea.ATTENDEE_TYP = 'ROLE' AND
ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
UNION
SELECT
au1.bu_id,
au1.first_nam,
au1.last_nam,
c.id,
c.first_nam_d,
c.last_nam_d,
c.birth_dte_d,
c.ssn_num_d,
se.id schd_event_id,
seu.dsc,
ssc.dsc,
sea.access_typ,
sea.ATTENDEE_TYP
FROM
CLIENT c,
APP_USER au1,
SCHD_STAT_CD ssc,
schd_event_url seu,
schd_evnt se,
SCHD_evnt_stat ses,
SCHD_EVNT_ATTENDEE sea,
CLIENT_APPT ca
WHERE
c.id = ca.client_id_k AND
au1.APP_ROLE_NAM_DESKTOP_K = sea.ATTENDEE_ID_K AND
ssc.code = ses.SCHD_STAT_CD_CODE_K AND
seu.code = se.SCHD_EVNT_URL_CODE_K AND
se.id = ses.SCHD_EVNT_ID_K AND
se.id = sea.SCHD_EVNT_ID_K AND
se.id = ca.SCHD_EVNT_ID_K AND
sea.ATTENDEE_TYP = 'ROLE' AND
ses.create_ts = (select max(create_ts) FROM SCHD_evnt_stat ses1 WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
Thanks in advance
prasanth a.s.

Hi,
it is difficult to change this query without the possibility to test it in a worksheet. But try the following query.
I think it should be the same result as your 3 queries.
SELECT au1.bu_id,
     au1.first_nam,
     au1.last_nam,
     c.id,
     c.first_nam_d,
     c.last_nam_d,
     c.birth_dte_d,
     c.ssn_num_d,
     se.id schd_event_id,
     seu.dsc,ssc.dsc,
     decode(sea.access_typ,NULL,' ',sea.access_typ) AS sea.access_typ,
     decode(sea.ATTENDEE_TYP,NULL,' ',sea.ATTENDEE_TYP) AS sea.ATTENDEE_TYP
FROM CLIENT c,
     APP_USER au1,
     SCHD_STAT_CD ssc,
     schd_event_url seu,
     schd_evnt se,
     SCHD_evnt_stat ses,
     SCHD_EVNT_ATTENDEE sea,
     CLIENT_APPT ca
WHERE c.id = ca.client_id_k
AND au1.bu_id = se.APP_USER_BU_ID_PRIME_K
AND ssc.code = ses.SCHD_STAT_CD_CODE_K
AND seu.code = se.SCHD_EVNT_URL_CODE_K
AND se.id = ses.SCHD_EVNT_ID_K
AND se.id = ca.SCHD_EVNT_ID_K
AND ses.create_ts = (select max(create_ts)
FROM SCHD_evnt_stat ses1
                         WHERE ses1.SCHD_EVNT_ID_K = ses.SCHD_EVNT_ID_K)
AND
(sea.ATTENDEE_TYP(+) = 'WORKER' AND se.id = sea.SCHD_EVNT_ID_K(+)) --clause of the 1st query
OR
(sea.ATTENDEE_TYP = 'ROLE' AND se.id = sea.SCHD_EVNT_ID_K)               --clause of the 2nd query
OR
(sea.ATTENDEE_TYP = 'ROLE' AND se.id = sea.SCHD_EVNT_ID_K AND au1.APP_ROLE_NAM_DESKTOP_K = sea.ATTENDEE_ID_K) --clause of the 3rd query
);

How can I make this scene in After Effects?

The Hobbit The Desolation of Smaug. Gandalf vs The Necromancer (Sauron) - YouTube
I am making this scene in stop motion lego. How can I make this scene, the shield vs smoke and the flaming figure, including the shots that zoom into Sauron's mouth. How do I do these shots? I am new to after effects. I have done basic smoke before, but nothing like this. I've done snow and green screen and fire, but I'd just like some help. Thank you I have CS6

There is no plug-in or button, only careful planning based on knowledge of the process of combining layers of images into a final image. Every element in a composite is a separate layer. If you are new you need to do some basic research. There are lots of books out there that will show you the theory. Start on AMAZON or your public library. http://www.amazon.com/Effects-Visual-Compositing-Studio-Techniques/dp/0321934695/ref=sr_1_ 2?ie=UTF8&qid=1421914012&sr=8-… may be a good place to start. Once you get some knowledge you can start breaking down a shot like this:
Layers that I see in this shot in order.
Vignette to darken the corners of the shot
Foreground smoke
Lighting effects on smoke
Foreground branches
Middle ground actor as a track matte or mask source for
Middle ground smoke
Middle ground lighting effects in the smoke
Actor on rock
Rock to act as a mask for background lighting effects and smoke
Rock
Background smoke and lighting effects
Background
If your original footage contained the background, the rock, the actor, and the branches then your first task would be to separate each of those to a separate layer. Then you would create or shoot the smoke and lighting effects and start building the layers. You then would modify the masks and effects on each layer to create the light wrap and look of the atmosphere using blend modes. Then you would add color grading effects or overlays to simulate the lighting in the shot. If you were really doing a shot like this you would probably add some lighting cues on the set to help sell the idea that a bunch of energy was lighting up the actors face. Like Mulenium said, there may have easily been fifty folks working on this shot for several days. It's completely unreasonable to expect that you can just add a plug-in and adjust some sliders to create the effect. Every composite requires you to separate elements into layers and then sandwich the elements you need to create and sell the effect you want to sell.

When I send an email notification that the form has been sent I want the receiver to get a copy of the actual filled out form not a ling to the data, how can I make this happen?

When I send an email notification that the form has been sent I want the receiver to get a copy of the actual filled out form not a ling to the data, how can I make this happen?

Hi,
you can find documentation for Designer under this website
http://help.adobe.com/en_US/livecycle/10.0/documentation.html#task=4,5&module=2
In Designer you can use the JavaScript API of Acrobat.
So the Devnet for Acrobat is also a good source.
http://www.adobe.com/devnet/acrobat.html
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??

Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know.

I keep Mail open on my MacBook Pro and prior to Mavericks items would open on my 27" secondary display. How can I make this happen in Mavericks?

I keep Mail open on my MacBook Pro and prior to Mavericks items would open on my 27" secondary display. How can I make this happen in Mavericks?

In System Preferences > Mission Control, uncheck mark Displays have seperate windows. This should bring you back to the secondary display you had before the upgrade. You may have to open Mail, the first time and place it on your secondary display. You also won't have the advantages of the dock and menus on the secondary display.
I keep my own secondary display with these settings because I need the ability to expand a window across both displays.

Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This Problem

Lotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

Go to System Preferences>Sound>Output and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

When filling out a form, some fields copy to others when I tab to the next. How can I make this stop?

When filling out a form, some fields copy to others when I tab to the next. How can I make this stop?

You can't using Adobe Reader. It looks like whomever created the form used the same identifiers (names) for various fields. Each field with the same name will populate with the information used in another field of the same name. This is intentional.
Normally when I see this, it tells me that someone created an initial field then copy/pasted it to make additional fields but forgot to change the names.

Just restored my iPhone from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop?

Just restored my iPhone 5 from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop? We had it all set up fine before the restore, and there was a trick to it in the settings. I've noticed that since my restore, her phone has picked up what looks like the symbol of a phone in the upper right corner of the display, right next to the Bluetooth symbol.

Hi Big Slick,
Welcome to the Apple Support Community!
It sounds like your iPhones may be using a new feature in iOS 8 called Continuity. The following article and information explains how to set up this feature for phone calls. You can review the information on the setup to reverse this effect. My suggestion would be to turn off FaceTime on one of the devices.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Cheers,
Joe

Whenever I open the browser, the check plugins page always opens in a second tab. How can I make this stop?

Whenever I open my browser, the check plugins page keeps opening, even after I have updated all of my plugins.
How can I make this stop?

That is a bug with blocklisting plugins that has been fixed.<br />
You can correct this issue by forcing the file blocklist.xml to update or wait until Firefox updates the file.<br />
That update will remove the severity="0" flags in the file that cause the problem.
See:
* [/questions/832793?page=2#answer-198407]
* http://forums.mozillazine.org/viewtopic.php?p=10899869#p10899869
* [https://bugzilla.mozilla.org/show_bug.cgi?id=663722 Bug 663722] - The blocklist output is including severity="0" where it shouldn't be

I seem to be short on space for the trial download. How can I make this work????

I seem to have less space for my download.How can I make this download happen?????? Will I have to uninstall my old Adobe Photoshop(which has long since worked) in order for this to be installed??

What exactly are you trying to download on what system? Feel free to download to external drives to bypass the immediate bottleneck, but that may not resolve your issue once you install....
Mylenium

Urgeent Help: Can compressor make this...

Similar Messages

Maybe you are looking for