Urgent!!! A question about p6.7 stand alone

I had P6.7 stand alone installed and have used it for a while. Last week, I suddenly couldn't login. After I entered password and clicked Login, and when "loading data" came to 99%, error message popped up and task ended itself, not able to enter into Primaver interface.
I decided to reinstall. I didn't uninstall the existing one. I just run R8.2 set up and tried to upgrad based on the existing 6.7 version. During the installation, up until the step “Creating PM database.....might take a few minutes.......”, I waited for more than 2 hours but the message still there and nothing happened. I didn't think it was good and I ended the installation.
Next, I went to Control Panel, Add and Remove Programs, uninstalled "Oracle database" and "Primavera 6". I changed back to P6.7. During the installtion, it was unfortunately the same as before, up until the step “Creating PM database.....might take a few minutes.......”, I waited again for more than 2 hours, but the message still there and nothing happened. I ended the installation again. In addition, I found "Oracle database" and "Primavera 6" were in Start Menu and the directory I choosed during the installtion. However, in Control Panel, Add and Remove Programs, there was only Oracle Database, no Primaver 6.
And then, I uninstalled the Oracle Database from Control Panel, Add and Remove Programs and tried to reinstall again. But I got the same bad luck. I repeated this process for a few times without success.
Who knows a SOLUTION? Much much appreciated.

Hello, well the Oracle Xe database is not the same that the Primavera database. If you already installed Oracle XE, go to Start menu --> Oracle XE --> Go to database homepage. Try to log in with "system" and the password that you configured in p6 installation. Go to Users, if you only have 1 user, that means that p6 database is not installed, and you need to created manually (probably windows configuration is blocking the .bat file)
to create the database manually check http://docs.oracle.com/cd/E16688_01/Product_Manuals/adminguide.pdf , Section:Automatically Installing an Oracle Database and Loading Application Data, page 49
And once the database is created, you need to configure the alias (connection between p6 and the database) (click on ellipsis button, add, select your name and driver type, for database connection string use XE, type your public user (eg: pubuser) , finish and try to log into p6
Best Regards!
PAblo

Similar Messages

[Urgent] Some questions about Oracle Portal 10g - 11g upgrade

Dear friends,
We are under doing upgrading assessment of Oracle Portal from 10g to 11g. After reviewed the 'upgrading guide', we still have some questions as below:
1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?
2. Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?
3. How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?
4. Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?
Thank you in advance and any comment are welcome.

1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?Instant Portal is not available anymore in Oracle Portal 11g. The Instant Portal page groups will be migrated to standard Portal page groups. Maintenance of the Instant Portal can be done with the standard Portal tools. The Instant Portal tools are not available anymore.
Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?Old 10g Page Groups are migrated to Portal 11g. They will still be available after the upgrade.
Export/Import through transports sets has always been limited to instances of the same version. It is not supported between versions as documented in the Administration Guide :
[11.2.1|http://download.oracle.com/docs/cd/E14571_01/portal.1111/e10239/cg_imex.htm#CCJBCCGD] System Requirements
Before exporting and importing content, ensure that your system meets the minimum system requirements, as described in this section.
Notes:
* Export and import functions only within the same release of Oracle Portal and the same patch release, for example, release 10.1.4 to release 10.1.4 or release 11.1.1 to release 11.1.1. You cannot export and import between two different releases, such as release 10.1.2 to release 10.1.4 or release 10.1.4 to release 11.1.1.
How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?Customized objects get migrated as well. Certain types (e.g. PL/SQL item types) need to be checked after upgrade as the behavior of the PL/SQL code may differ between database versions. This is particularly of concern when the 10.1.4.x Portal uses a 10.1 database. A database upgrade to either 10.2, 11.1 or 11.2 is necessary as Portal 11g is not supported with RDBMS 10.1.
Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?Never done this, but the Portal framework is able to consume JPDK providers which are running in older versions of the toolkit. If the providers are running in standalone OC4J containers, you would be able to upgrade the framework and keep the providers in their OC4J containers. This will allow you to focus on the framework first and worry about your providers later.
Thanks,
EJ

[Urgent] Some questions about OID/OSSO 10g - 11g upgrade

Dear all,
We are under doing upgrading assessment of OID/OSSO 10g to 11g for a customer. After reviewed the 'upgrading guide', we still have some questions as below:
1.     Whether the ‘10g DIP profiles’ will be still available after the OID 11g upgrade? Currently there are some sync of AD<->OID and DB->OID.
2.     Whether the ‘WNA’ function will still work after the upgrade?
3.     Is there a big change of OID API from 10g to 11g? If so, I think a big effort maybe on application modification.
4.     I found that there is a OAM Basic version for OSSO 10g upgrade. So if this OAM Basic will migrate the OSSO configuration (like external application) automatically, or it must be re-configed after the upgrade?
5.     Currently customer config OID 10g as BPEL/ESB’s identity store. So does BPEL/ESB 10g is certificated with OID 11g also? I didn’t find the certification so far.
Thank you in advance and any comment are welcome.

Dear all,
We are under doing upgrading assessment of OID/OSSO 10g to 11g for a customer. After reviewed the 'upgrading guide', we still have some questions as below:
1.     Whether the ‘10g DIP profiles’ will be still available after the OID 11g upgrade? Currently there are some sync of AD<->OID and DB->OID.
2.     Whether the ‘WNA’ function will still work after the upgrade?
3.     Is there a big change of OID API from 10g to 11g? If so, I think a big effort maybe on application modification.
4.     I found that there is a OAM Basic version for OSSO 10g upgrade. So if this OAM Basic will migrate the OSSO configuration (like external application) automatically, or it must be re-configed after the upgrade?
5.     Currently customer config OID 10g as BPEL/ESB’s identity store. So does BPEL/ESB 10g is certificated with OID 11g also? I didn’t find the certification so far.
Thank you in advance and any comment are welcome.

Urgent: A question about jadtool

I read some document and got the idea that
JDK tool jarsigner can be used for jar signing and signature verification,
but WTK tool jadtool can only be used for MIDlet signing but cann't be used for signature verification.
If I want a promp way to verify a signed MIDlet, what could I use?
Thank you for help.

That's because you've put the bean in the request scope : request object dies when servlet or JSP sends info back to the browser and closes the stream (ie : when page is shown in client browser).
An easy solution is to put the bean in session scope.

How do you deploy a stand alone app/game in java

I have a few questions regarding creating a stand alone app for java.
1) What is the best way to deploy it? how would I create the exe, etc. I've read that you can create executable jars but this doesn't seem like something that would be user friendly
2) Is there a way to deploy the game/app with it's own JVM so the hosts machine doesn't have to have it installed? How would I go about doing this?
3) How would I run the app in full screen? What libraries are available?
Any other advice/comments welcome.

@morgair: There are plenty of good reasons for using Java to develop software, even when you only plan on targeting Windows. As good as Java distribution is there is no way to guarantee that they a) have Java installed and more likely b) have the version you target installed. Telling a user that they need to go to a second website in order to download and install more software is a huge turn off.
Most PC users have no experience with a .jar so when they download it they just don't know what to do (even if all they need to do is double-click just like a .exe). Giving out an executable .jar is another turnoff.
sarcasteak wrote:
1) What is the best way to deploy it? how would I create the exe, etc. I've read that you can create executable jars but this doesn't seem like something that would be user friendlyIn terms of the .exe, Java does not create .exe's. There are some java to native compilers that will turn your java code into a natice .exe that will run on it's own or with a bundled library. However they are either old, buggy and badly supported, or extremely expensive (googling Java native compiler should give you some good results). There are also plenty 'java to exe' pieces of software. Rather then compiling the java code to native code they wrap the .jar up inside a .exe. When you run the .exe it unpacks the .jar and runs it. To the user it looks like a .exe, however it's still just an executable jar and still requires Java to be pre-installed on their machine in order to run (although some can offer custom error messages if Java is not found).
If Java is setup, then executable jars are essentially act the same as exe's. For creating them, if you are using NetBeans then they are already available in the project/dist folder after you build. You can also do it on the command line but I never need to so I don't know how. However as a tutorial [this site looks promising|http://neptune.netcomp.monash.edu.au/javahelp/howto/jar.htm].
I personally use a small .exe which I built using the D programming language. It reads from a text file in the same directory and executes each line in turn. Typically all the text file contains is 'java -jar MyProg.jar'. This way my .jars for the user looks like a .exe.
Instead of a .exe you could also use a .bat. There are also some .bat to .exe converters online, although I haven't tried any of them so use at your own risk.
sarcasteak wrote:
2) Is there a way to deploy the game/app with it's own JVM so the hosts machine doesn't have to have it installed? How would I go about doing this?Yes, you are allowed to redistribute the Sun Java runtime. Just zip up the JRE on your machine and include it with the app/game. You'll also need to ensure that whatever starts the jar uses your unzipped JRE and not the JRE on their machine. The exe I described above also allows this by having the text file contain something like: './my_jre/bin/java -jar MyProg.jar'.
But first you should also take a look at the license restrictions, they should be in the JREs directory. For example you must redistribute the complete JRE which is a problem if your app is just a few megabytes (when zipped the runtime is usually over 30mb). There are probably plenty of topics on this forum which already discuss redistribution of the JRE.
sarcasteak wrote:
3) How would I run the app in full screen? What libraries are available?If it's an app then it should be approximately:
JFrame frame = new JFrame();
frame.setExtendedState(JFrame.MAXIMIZED_BOTH);or;
JFrame frame = new JFrame();
frame.setExtendedState(frame.getExtendedState() | JFrame.MAXIMIZED_BOTH);However if you want a proper full screen then you need to use the [Full-Screen exclusive mode|http://java.sun.com/docs/books/tutorial/extra/fullscreen/exclusivemode.html], approximately:
JFrame frame = new JFrame();
GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().setFullScreenWindow( frame );I've also heard plenty of people recommend using java web-start for desktop java apps. Personally I've never used it, but it's something you might want to research.
Edited by: jl235 on Jun 22, 2009 3:03 AM

SAP HCM stand alone product

Hi....I'm a SAP ABAP developer and new to SAP HCM...I want to know if is possible to implement SAP HCM module as a stand alone product without implement FI-CO modules or without having interfaces to another SAP ERP system, my client only need a HR system, they already have and are comfortable with their current systems.....Where can I found information about SAP HCM stand alone implementation if this case is achievable.
Thanks in advance,
Mirko.

Thanks Rajdeep for your reponse.....we want to implement:
   - OM (Organizational Management)
   - RC (Recruitment)
   - PA (Personnel Adminitration)
   - PT (Time Management)
   - PY (Payroll)
Beside Company code, what another mandatory things are necessary configure?.....Can they be for FI: Business area, the G/L accounts for payroll? and for CO: CO area, cost center?
Greetings and thanxs in advance.
Alfredo.

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

About Limited CRM User and CRM Sales User (Stand alone)

Hi,
I need to know about the Limited CRM User and CRM Sales User (Stand alone).
What entry should I create by using these Licences.
Regards,
Pushpa

Hello Anoop.
Which version of B1 using? 2007/8.8
There is a documentation about the licenses.
CRM Sales User (Standalone) was an old systems, and in 8.8 Limited CRM User is a real license type, on 2007 is means professional user.
check the license types on
https://websmp209.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000707558&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Did you tried to set an addon access license?
Regadrs
J
Edited by: János Nagy on Jun 23, 2010 5:14 PM

URGENT: Question about User_Exit

Hello All,
I have a question about user_exit. Does it share the same transaction context as the calling form??
If it does, how to implement the same thing in Java.
Any help or material available somewhere?
TIA
Naveen

Naveen
Actually what we are doing is converting Oracle Forms code into java code and i cannot open and change the code that is being called by the User_Exit built-in.
So i want to know is how i can still keep the same functionality, without changing the Pro*C code into java, or some other native code.Since what you have in hand is an user exit I dont think you can use it straight away from Java Forms unless you do not have any Form specific things.
In User exits we can do thigns like getting and putting values from/to oracle forms items and there are also provision to pass error and other related information between the forms and user exits.
this is actually accomplished by having some internal API's ( these are invoked by the user_exit builtin in Forms) in Oracle Forms. And this is predefined and there is nothing much to know how this functionality works. And Oracle itself does not support User exits( if there is any interaction with Form) in Oracle Web Forms. And user exit has many Oracle specific libraries linked to it during compilation.
Knowing this you should first know whether your user exit is Oracle Forms Dependent. If it is I think you dont have much options than rewriting your user exit.
On the other hand if it does not , then I think you can easily get rid of the error and other handling information( if present in the user exit )and recompile it as a standalone Pro*C executable and the call it natively since it is noting but a C program in the compiled state.
OK but regarding the connection you have to go back to Java and ask whether there is way to pass a conection context to a native C program( dont mention Proc or Oracle Forms here)
So start finding whether your exit is Oracle Forms dependent. If not you can take it easy except for the connection thing which I am not . But if it is dependent then I think u have to start rewriting.
Good Luck
Vij

Urgent - Question about logging and debugging.

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Quick (and urgent) Question about Intel G5's

Just a quick question about the new intel G5's.
I currently have bunch of software for my PPC G5 which is a Dual 2ghz. Software includes Adobe CS2, Macromedia Studio, Quark 6, etc, etc.
If I purchase the new intel mac, would I be able to use the same software? or would I be forced to purchase a whole new set of everything I currently have?
If the software will work on the intel G5, would it perform at the same rate/better than how it performs now on my PPC g5?
Thanks in advance for any help.

Rosetta:
Most of the time you get a real 'hit' when a program first opens that is PPC. Very sluggish. They will require and use more memory than otherwise, too.
Tests from last August aren't as helpful, there have been improvements, letting the Mac Pro pull even further ahead.
http://www.barefeats.com/quad06.html
Comparison Mac Models shows scores of all models. So there is 2x as much or more processing power, bandwidth, better video, as well as disk drives. A 'base' configuration would be 4-6GB RAM.
And there are differences, more than between G4 and G5.
People with experience would be Mac Pro Discussions
Don't use Migration Assistant, and upgrade to CS3 etc. reinstall all your applications fresh.
There are some drivers and plug-ins, that can be problems, and known.
Mac Pro 2GHz 4GB 10K Raptor RAID Cinema HD Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

Compiz as stand-alone + xfce4-panel : a few questions

After some months with gnome 3 I decided to go back to compiz, as I used to use that with gnome 2.xx and appreciated it quite a bit. I ran into a few problems when trying to set it up properly.
First, is there some way to enable session management with compiz? I would like to be able to have a button or menu that offers to sleep, reboot or shutdown the computer. Not that I mind using 'pm-suspend' and other commands like that, but my girlfriend also uses the computer sometimes so it needs to be more user-friendly than that. I noticed there is an actions button by default in the xfce panel but it doesn't work in compiz and just says 'session management is disabled, do you want to exit X' or something like that.
Second, I need some sort of run prompt when I hit alt-f2. The 'gnome compatibility' option in ccsm doesn't seem to work in standalone mode.
Third, I want the computer to automatically sleep when I flip the lid. In gnome 3, it does that without any special configuration, but this doesn't work with compiz as a stand-alone. I suspect I need to configure it to pick up the 'lid is flipped' event somehow?
Fourth, I need a volume control option that will display a volume icon in my xfce4 panel notification area and most importantly I need that volume control icon to respond accurately to the input from my 'mute' and volume 'up' and 'down' buttons. It's a thinkpad x220 laptop. I bring it to school often, so being able to know whether my volume is on or off is important when in class. This works fine in gnome3 but I have tried other DE's such as LXDE and found that the volume icon stayed the same as I used the volume buttons on the keyboard (the buttons did work, so it could be muted but still displaying that it's at full volume). To check if it was muted or not, I had to open a terminal and use alsamixer.
Of course, I don't NEED to be using xfce4-panel. What I need is a menu, and automatic menu generation is nice because it's easier to configure. So I picked that one because I've used it in the past. If there is a better alternative, please recommend it. Or perhaps it would be best if I simply ran gnome fallback and compiz as the WM?

I'm using compiz standalone, so here's how i solved that stuff.
You can use obshutdown for session management, it's in AUR, look in its config file, slap a launcher in the corner of you panel, set the icon for prettyness and it works pretty well.
I use gmrun as a launcher, set alt+f2 to call it. It's pretty simple which is what i like. You can also use synapse, or gnome-do, they have more functionality like searching your bookmarks, your files, your loved one's medical history, you name it.
For volume control, you can use pnmixer from aur, it sits in your system tray, and you can set it's hotkeys, but you can also use CCSM to set your hotkeys for volume management.
I think laptop-tools(check the wiki) can be used to put your computer to sleep, and general powersaving. You should check the article named laptop in the wiki for other laptop-related stuff too. I think i used xfce4-power-manager for power management as well a while ago.
I used xfce4-panel for a while but i didn't really like it as much as i liked the old gnome-panel, so i installed mate-panel(which is the old gnome-panel). You can find it in AUR, or you can check it's wiki article for repos you can add for mate(if you want to install it from aur, it will pull some aur dependancies, and i didn't feel like compiling everything).

BW report without stand alone BW server

Hi Experts,
My query is about basic understanding of the System Landscape for using BW reports. Basically, There is a requirement to use BW reports on stand-alone SRM 5.5 server. Installation guide of SRM suggests that we can install BI 7.0 "content" along with SRM 5.5 server.
The question- Is it possible use BW reports just by installing BI content on SRM server?
Further I would really like to know, if the answer of above question is YES, then what are the prerequisites for it and if 'NO' then what is the BI content's role in SRM server?
Thanks in advance
Regards,
Amit

Hi Amit,
According to my knowledge, you can build up all in one server. But the most important thing is about client. the BW client have to be different from the others.
And their are 2 main application component that related to BW. there are SAP_BW and BI_CONT. this 2 Application component have to be build on the netweaver infrastructure.
Regards,
Assign Point if you see its helpful,
Chuong Hoang

Ni-daqmx stand-alone matlab

Dear all,
I am about to compile my matlab code into a stand-alone program, which works fine. However, as soon as I start the data acquisition the program fails to initialize the DAQ-board.
I'm using the NI-9201 USB-ADC in combination with the NIDAQmx driver.
I localized the problem: When trying to initialize the ADC the program fails, since the required dll's are not available. I also localized the dll's and copied them into reach for the stand-alone, but it doesnt work.
As long as the MATLAB\toolbox\daq\daq\private folder is reachable for the programm/Windows, the software works. However, on the custumers computer I dont want to have MATLAB installed (what sense does it makes to have the option for distributing a stand alone version if the customer has to buy a MATLAB licence?).
Can anybody help me solving this problem? Are there any dll's I may copy into reach of the stand-alone?
(Just as information: The NI - Measurement and Automation was installed on the "customer-computer", In fact it was the exact same computer with the only difference that I renamed the MATLAB folder)
I'm looking forward to your suggestions!
Bastian

The MTALAB toolbox of question is the dataacquisition toolbox, everything else works fine
The Matlab run-time is not the problem in generell, since everything except of the NIdaqmx-dll's is linked in the program. Here a short description how it works in matlab.
- you write code, GUI's etc. and test the program in Matlab
- then you compile the application into a stand-alone
- if you hand it to a thrid person that has no Matlab licence, you also distribute the MATLAB-Runtime-Environment (MRE)
- the person installes this freely-distributable MRE on his computer and then runs the compiled program
All functions in the program are able to run, except of the NIdaqmx. As soon as I the program tries to communicate to the ADC (i.e. open a channel) the program fails. However, when I provide the dll's mentioned in the exact same directory as they were in Matlab, it works. So I'm not sure what tells the MRE that the dll's are in that folder, since it didn't work, when I just copied the dll's in the run-time directory of the stand alone.
Since the program that I would like to distribute is quite complex, re-writing the hole thing in LABView is not an option for me (also, I have no experience with LabView at all, which would require some time to get into it).
The solution I aim for would be:
1st (best solution)
I just do something in the program to have the dll's compiled and linked to in the stand-alone
2nd
when installing the program I provide the dll's. (But I dont want to provide them in the folder ..\MATLAB\...\daq\daq\private\...)
If you dont have the experience with matlab, do you know someone I could ask for this? Maybe a Matlab forum that addresses NI-ADC questions?
Thank you for your support!
Sebastian

Question about the choice of containers of the J2EE application server

Hello,
I need to be clarified about the J2EE technology. After read some documentation about J2EE, I saw that it is possible to use different kind of containers in order to develop a J2EE application.
Actually I use an application server (JONAS) with tomcat embbeded so I develop my application that is composed by EJB and servlet. So when I build and deploy my application at the end I have got a .ear, and everything works well.
But my questions are:
1- If I installe a J2EE server where a web server (Tomcat or another) is already installed can I use this web server as my web container.
2- If it is possible how can I indicate to my J2EE server that I want to use this web server as a web container?
3- And for my application does the .ear will work or do I have to split my entire application in .jar for the EJB and .WAR for the servlet.
4- My last question, how my .war and .jar will know that they have to work together, in fact do I have to precise a link between them if yes how?
Thank you very much for any information

1. Every J2EE server must have a web container, so one will always be installed. As long as you write a compliant .war that is deployed either stand-alone or as part of an .ear, you can be guaranteed it will deploy and run.
2. The fact that you are deploying a .war or an .ear that contains 1 or more .wars is enough for the J2EE product to know you need to run the web-application on the web container. Many people uses the terms
web server and web container interchangeably. Often people are more likely to use the term web server if it runs as a separate process. If it helps, you can think of the J2EE web container as being an implementation of a servlet and jsp container that runs on top of a regular HTTP engine, but J2EE vendors don't necessarily have to have separate products for each.
3. You can either deploy a standalone .war or embed 1 or more .wars within an .ear.
4. The fact that you have a .war and an ejb-jar within the same .ear tells the application
server that they're part of the same application. If you need to talk between your web application
and the ejb, there are number of ways to express that dependency. E.g., if you want to invoke on
an ejb through its Remote client view, you would define an ejb-ref in the environment of the web-application.
--ken

Urgent!!! A question about p6.7 stand alone

Similar Messages

Maybe you are looking for