Urgent about deleting request

hello experts..
i had added indexs to a table and a request is created for that in development system. Now i wanted to delete that request and undo the changes that i had done to the table. when i am trying to delete the request it is showing the message that the object is locked. please tell how to delete the request and undo the changes...

Hi
Retrieve previous version of the table using version management. Delete the index you have created.
then delete the objects that are attached to the transport request, finally delete the transport request. While deleting the objects for the tranpost it will pop-up like so and so object is locked... just continue with the process...
Regards
Satya

Similar Messages

Info about deleted request ( log )

Hi experts,
i deleted the request over cube. I received info about request-id and "request number" in log.
Can i obtain more info about this request, which was deleted ( e.g. InfoSource, DataSource) in any SAP table ?
Thanks in advance
Martin

Hi Martin,
Use transaction :SLG1
enter the Object * , sub obj -* and enter the From and to Date/Time -- execute
you can get the complete details.
Check the table :RSREQICODS_SAVE(Requests Deleted from Administration Stored Here)
Regards
KP
Edited by: prashanthk on Dec 9, 2010 3:06 PM

Error in Deleting Request in DSO (Problems related to table RSTSODSPART)

I transfered data from one DSO to another DSO. After selecting the request and clicking the Delete in the second DSO, I found this error message
'Request is already (partially) activated; no further QM action possible'.
Then, I went to the log table. It shows me this msg.
'Data inconsistency; Partition /BIC/B0001371000 not deleted' Message no. RSAR026
(The table /BIC/B0001371000 is the Change log table of the second DSO.)
In the long text, SAP tries to explain something related to this table RSTSODSPART. Please tell me what this table is used for.
Then, I checked data in this table (RSTSODSPART). It shows me one record which is the changed log table name (/BIC/B0001371000) with the Del Flag marked as 'X'.
1) How can I delete this request in the second DSO?
2) Why is that record put into this table?
(I tried deleting this record from the table RSTSODSPART and then delete the request again. It works well, but I'm not sure if it is harmful to delete data from this table directly)

Hi..
try this ...........
The 'RSAR_PSA_CLEANUP_DIRECTORY' program checks the PSA tables in the systems against the directory entries. It also checks for inconsistencies related to partitions.
The program has the following options/fields:
Persistent Staging Area/Technical ODS Name:(RADNAME/RADTECH) These are radiobutton options. The option 'Persistent Staging Area' allows to find the inconsistencies based on the name of the PSA that is entered through the select options. The other option 'Technical ODS name' finds the inconsistencies based on the technical name of the PSA.
Persistent Staging Area/Technical ODS Name:(PODSNAME/PODSTECH) These are input fields and would be visible based on the radiobutton checked in the above option.
In directory, not in PSA:(DELDIR) This option if clicked will check the existence of requests which are present in the PSA directory (in table RSTSODSREQUEST) but do not exist physically (in the PSA). This option will also display the number of requests and the records physically existing for the PSA.
Partition Errors/Info:(NODROP) This option displays inconsistent behavior of the partitioned PSAs where all the requests are deleted logically (in table RSTSODSPART) but the partition is not dropped. It also displays the information about the ratio of logically deleted requests to total requests, ratio of logically deleted records to total records and their percentage, for a given partition.
The logs created by this program can later be accessed by transaction 'SLG1' using the following select conditions:
Object = 'RSAR'
Subobject = 'METADATA'
External ID = 'RSAR_CLEANUP_PSA_DIRECTORY'
Depending on the release of your BW system, the program 'RSAR_PSA_CLEANU
P_DIRECTORY' is contained in the Support Packages below. Alternatively,
you can use the attached correction instructions. Note that first, the
program header for the program 'RSAR_PSA_CLEANUP_DIRECTORY' must be
created with the attributes 'Executable Program' for the development
class 'RSAR'. You can then copy the source code from the correction
instructions.

How to get back the deleted request.

Hi BW gurus,
I was having a problem in ZFIGL_01 cube. 1 request was showing some error so i deleted that request without changing its status from green to red.
i then loaded the data again and now its not allowing me to activate that request in ODS because of that earlier request but when i go to reconstruct/insert tab its not showing the request which was deleted by me. Does that mean the request has been deleted from PSA also?
What will be the workaround in that case?
And in near future to avoid such kind of scenario what will be the settings required to be done so that i can see all the deleted requests in insert/reconstruct tab irrespective of the status of the request.
Now this will create problem from tommorrow onwards in my PC if it doesnt get solved. Kindly reply as early as possible.
Thanks
BW user.

hi,
Hope the upload is delta,
1. Goto TX: RSMO and identify the request.
2. change the request to Red/Green.
3. Reload the data.
suggestion: If it is a delta upload, Check the timestamp at R/3 or ERDATE before reload.
Regards,
Vijay

Unable to delete requests from ODS

Hi Experts,
I am trying to delete requests fwhich is having some added records rom an ODS. I changed the status of QM to RED and in the monitor screen as well. Now, when I try to select the request and delete, a trash can appears and after hitting the refresh button the reportinng availability appears against the request.
I deleted the entries in the change log table...then I was able to delete the request from the ODS. Now when I try to reconstruct those deleted requests from the Reconstruct tab by changing the QM status in the monitor to green, the status of these request are in Yellow and there are updated records but the added records are 0. When I try to change the QM status it give s message "Request is already (partially) activated, no further QM action is possible.
How do I change the request QM status to Green and the get all the added records as there were in previous instead of 0's with out reloading the ods from r/3.
Thanks in advance,
HT

Hello,
This error may be RSMPC141 error.
Please see Note 643880 and Note 849857
this may occur becos of loss f records in change log.
You will need to reload to fix this problem
regards,
karthik

Unable to delete request from ODS - BW 3.5

Hi experts,
I am not able to delete request from ODS in BW 3.5, patch level 21. I put the request red, but it does not help to delete it. The request is full load and quite hudge (16GB). Deleting actually takes too long (several hours), but does not finish, so I cannot tell you any error description. It seems that this job can run forever... I was trying to activate the request before, but because of a tablespace limitations I received some short dumps. That is why I am trying to load it agin in smaller parts. It is strange thou that in Manage/requests tab the request has flag 'available for reporting' but the data cannot be viewed as active (only as new data). Any ideas, OSS notes?
Thank you,
Michal

Hi,
If you want to delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
You can check OSS Notes 947481
Regards.

Unable to delete request from write-optimized DSO (Error during rollback)

Hi Gurus,
I am trying to delete a delta request from a Write-Optimized DSO. This request was uploaded with a DTP from another Write-optimized DSO.
The actual overall status of the request is RED and the description of that status is now: 'Error during rollback of request DTPR_4JW6NLSVDUNYY3GTD6F4DQJWR; only rollback allowed'.
I checked the log of all Request Operations in DataStore (from the same line where the red request is now) and I see my several attemps to delete this request under a RED radiobutton with the title Rollback. The details for this error are the following:
Could not delete request data from active table
Message no. RSODSO_ROLLBACK114
Diagnosis
The system could not delete the request data from the active table of a write-optimized DataStore object.
System Response
Write-optimized DataStore object: DTFISO02
Active table: /BIC/ADTFISO0200
Request: DTPR_4JW6NLSVDUNYY3GTD6F4DQJWR
Procedure
Search for Notes containing the key words "Delete write-optimized DSO PSA"
I am relatively new to SAP BI 7.0 and I do not know how to delete this request. Any help will be highly appreciated !!
Leticia

Hi Leticia:
Take a look at the SAP Notes below.
Note 1111065 - "701: Delta consistency check for write-optimized DSOs"
Note 1263877 - "70SP20: Delta consistency check for write-optimized DSOs"
Note 1125025 - "P17:PSA:DSO:ODSR missing in PSA process for write-opt. DSO"
Additionally, some ideas from the alternative presented on the blog by KMR might help you.
"How to generate a selective deletion program for info provider"
Regards,
Francisco Mílán.

Error while deleting request from DSO: S:RSODSO_ROLLBACK:259

Hi,
While deleting request from DSO, we face following errors:
S:RSODSO_ROLLBACK:259 129 transaction rolled back by an internal error: fail
Message no. RSODSO_ROLLBACK259
Job is getting completed with message:
Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
<Message short text RSODSO_ROLLBACK 259 does not exist>
Parallel processes (for Rollback); 000003
Timeout for parallel process (for Rollback): 000600
Package size (for Rollback): Dependent on Activation
Task handling (for Rollback): Backgr Process
Server group (for Rollback): No Server Group Configured
Job finished
FYI:
Kindly help us to resolve the error.
Regards,
Antony Jerald.

Hi Dinesh,
Thanks for your reply.
We have Netweaver 7.30 with BW on hana on SP 9.
First 3 SAP notes doesn't meets the need.
Shall I use 1007717 note?
Which says:
use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
Will it resolves the problem?
Kindly suggest.
Regards,
Antony Jerald.

Delete requests in a infocube with infopackage

Hi BW Gurus.
I have to delete a request in a infocube during the loading and I would like to use the option "deleting request from infocube after update" inside the infopackage.
The option "Selections are ...same or more comprehensive" is not what I need because I would like to delete only when the selections in the infopackege are equal and not when they are more comprehensive.
For example, if I load from month 01 to month 03, I want to delete only the prevous request with the same selection and not the request that have from month =01 to month=02 selection.
The infopackage selections are read from a custom table.
Thanks for any help.
S.

Hi. Thank for the reply.
I can't use this option.
Look at the example:
I have a request with "from month 01 to month 02" selection and I would like to load a request with "from month 01 to month 03" selection.
The option "'deleting requests with same or more comprehensive" deletes the request because month 01 to month 03 is more comprehensive than from 01 to 02 month.
The option 'deleting requests with overlapping selections' deletes the request because because month 01 to month 03 overlapp from 01 to 02 month selection.
It could be good to have a "delentig request with same selection" option and not with "more comprehensive" in the same option.
S.

How to send a delete request to Q and P systems

Hi Gurus,
I need to delete a report from production. Can anyone please tell me how I can send a delete request from Dev system inorder to delete the report in production?
I know we need to use trans code RSZDELETE , but will that prompt me to create a delete request?
Thanks,
Nip

Delete the report in Development get the request and transport it by following the same way as you transport all other requests.
Sarhan.

How do i go about deleting a large number of files at the same time? where's the easiest place to do it?

how do i go about deleting a large number of files at the same time? where's the easiest place to do it?

A bit vague as to what you intend, but the simple answer is to select all the files you want to delete then either drag to the Trash or CTRL- or RIGHT-click on the selection and choose Move to Trash from the contextual menu.

Question about delete statement

I have question about delete statement...
i am performing some simple delete statement against one table..but its taking so long..How can we check whether particular delete statements actually deleting records or not..?

Is the associated select-statement returning rows or not?
If yes -> delete is deleting
If no -> delete is just using CPU-cycles
To tune the delete-statement, you have to tune the corresponding select-statement. To tune the select-statement, you want to read the thread When your query takes too long ...

HT5043 So I was a little skeptical about deleting photos from my iPhone but I did. Shouldn't I be able to access them on iCloud? Because I can't find a way to view all my old photos that were backed up before I deleted them.

So I was a little skeptical about deleting photos from my iPhone but I did. Shouldn't I be able to access them on iCloud? Because I can't find a way to view all my old photos that were backed up before I deleted them.

No you can not access yoru photos on iCloud
PhotoStream is a way to share photos between devices - it is not a way to backup photos or to view photos
LN

Where can I find the deleted request.

Hi Experts,
I have a general question. In BW 3.5 version in which table we can see the deleted requests.
Just like the table RSICCONT where we can find the available request in the data target.
Thanks in advance
Narendra.

Hi......
Check the following table......it may help u......
Table for deleted Request
Also check ..............
http://sapbwneelam.blogspot.com/2007/08/bw-useful-tables.html
U can also try to search in the table DD02L.........this table contains list of all tables........
Regards,
Debjani....

Z program for batch deletion request

Hello I am a consultant mm inexperienced, need to help guide a abap so you can make a program where you can make the Z deletion request batch, in the transaction principle "MSC2N."
Please someone can help me? Bapi there is a standard or something?

Hi Chandrashekhar,
You can do so using RSBDCSUB.
Please refer below link :-
[http://help.sap.com/saphelp_40b/helpdata/pt/fa/09714d543b11d1898e0000e8322d00/content.htm]
Regards
Abhii

Urgent about deleting request

Similar Messages

Maybe you are looking for