Urgent : abroad and phone not working anymore

Hello,
So this request is a bit urgent, i'm abroad and in a few hours i will travel again and i really need my phone to work.
My blackberry is not turning on anymore. At first when i plugged it in my computer it was saying that i could not charge from the device but now it is not even recognized by my computer anymore. I tried to plugged it in a regular electicity socket but it doesn't work as well. The phone is not charging.
My phone has no battery anymore and i don't know what to do. I'm abroad, everything is closed here and i'll move to another country in few hours. And i won't be able to get to my accomodation if my phone is not working.
Please, if you have a quick solution feel free to share it with me.
P.S. : Sorry for my english, this is not my mother tongue

Now are you using a Universal or a converted charger ?
Remember all country uses different voltage.
What is the LED behavior ?
Have you try to connect the device to a Laptop or PC to Charge & see the behavior ?
BlackBerry smartphone does not turn on and the LED flashes
http://www.blackberry.com/btsc/KB04596
Good luck and let us know!
If it helped you, click like.
If my response has helped you, please click "Options" beside my post and mark it as solved.
Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Good luck and let us know!

Similar Messages

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

TS2771 hi everyone, can you help me, because my ipod touch 5th gen, is not opening since this morning, i am just listening to music last night. And its not working anymore. THANK YOU

hi everyone, can you help me, because my ipod touch 5th gen, is not opening since this morning, i am just listening to music last night. And its not working anymore. THANK YOU

If not successful try the ramaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Usb and firewire not working anymore after ftdi driver installation

hello there,
i had to install the ftdi driver (http://www.ftdichip.com/Drivers/VCP.htm) in order
to use my dive computer with macdive 2.
now after i have done that, my mbp does not recognize my usb 2.0 card reader anymore.....
also my firewire 800 cf cardreader is not recognized.....any ideas, where to start. i just
moved from windows to mac and i am really lost.....
brgds
christoph

Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan.

10.5.7 - Bluetooth keyboard and mouse not working anymore

Updated to 10.5.7 and since then after some minutes my Appley wireless keyboard and the mighty mouse do no work anymore.
Note that the connection is not lost. When I then turn bluetooth off, the system tells me that the connection got lost and when I turn it on again it works as before. But after some minutes it won't works.
This happens on a new MBP.
How can I solve this problem?

I had similar problem w/logitech bt keyboard and almost threw the **** thing (mac) out the window. but reason prevailed and i did get it working. what i did was to power off the mac and remove the batteries from the keyboard (then had dinner...) then i powered on the mac and from another mac (i dont have a usb keyboard around) i screenshared into the keyboardless mac and deleted the keyboard from the list of bt devices. then i turned on the keyboard and re-paired it (using the screensharing mac). after that it has worked fine and the losing connection issue is better but sadly not gone!
good luck
JP

Is there any way to get my photos and videos off a ipod touch 5th gen that went through the was and does not work anymore?

My ipod touch 5th gen went through the wash the other day while it was on and it came out not working at all. I was wondering if there was a way to get any of my photos and videos off of it so i could put them on my computer. Anything will do, from do it yourself methods to companies that will do it for you.

- If they are in an iPod backup then restore another iPod, iPad or iPhone from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting photos (only) from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- A data recovery company can likely get them off the iPod. Be prepared to pay alot. Google for iPhone data recovery

Dropped my ipod nano in water and its not working anymore....is it officialy dead?

I'm sure I already know the answer to this, but is it officially dead? I only ask because I have had this happen to me before and I actually had got it to work again! But unfortunally I don't remember what I did to get it to work....so does anyone know what to do to make it work possibly?

Suggest that you check out the website iFixit.

Yosemite update to Mac pro keyboard and mouse not working anymore

Updated to Yosemite on my Mac pro, worked perfect for about 2 weeks then my keyboard and mouse stopped responding, both keyboard and mouse were replaced and still won't work. The computer turns on but won't respond to the USB mouse &Keyboard. Help

I have seen 2 out of the 6 mac pro's in my office do this. I am about to go to the apple store to show them.
When the computer is doing this I have tried using every wired apple keyboard in my office and none of them work. If I try the same keyboards on a windows computer or my macbook they work fine. If I use any non apple usb keyboard they work fine. My problem is if I turn the computer off for a few hours the usb apple keyboard works again so when the computer has been off all night and I pack it up to take it to applecare it is working by the time I get into the store.
I think there is a small flaw in usb port on the mac pro or the apple keyboard that when heated up from use stops the pins from contacting completely. It might be a manufacturing defect and it might be an unintended problem caused by how apple slightly modifies their USB ports.

My 16 months old MacBook Pro just got out of battery and turned off in the normal way in this cases. After conecting it to the electricity, I turned it on again and then after restoring the sistem went off and its not working anymore!!!

I tried pressing at the same time ctrl shift comand keys to reset it and then when I try to turn it on again it just starts the screen blinks and the hard drive sounds briefly but then it dead, if you close the mac then the light that glows when is sleepeng turns on and the computer gets hot and the fans turns on and it´s stopped when the battery is dead again.
Please help its incredible, it´s my 3 mac and I never experienced this before.

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

Audio Jack of my HP Envy 4 is not working anymore

Hi all,
I have purchased HP Envy 4 just a 4 months ago and now something worong with its audio jack for headphone and its not working anymore. The hardware profile for this audio jack shows no error but its still not working. Is there anyone who can help me out this issue???
Regards,
This question was solved.
View Solution.

Lets start with you helping us by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
Don't forget to post the name of the installed operating system if you haven't already done that.
If Windows 8 is installed, you can invoke the search charm and type in the word audio and then on the right hand side of the screen click on Settings. On the left hand side of the screen, you should see an option to select Find and fix audio playback problems. Try it to see if it resolves the issue for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IPhone 5S mic and Touch-ID do not work anymore - What to do?

Hi together and a happy new year to everyone!!
At the moment I have got a serious problem talking about my new iPhone 5s. As it's a cell phone I would like to talk to my friends and family using it. But it seems that this part of the devices is not working anymore as the mic doesn't record anything. If I try to call someone, they can't hear me while I can clearly listen to what they are trying to tell me. So I was wondering whether this is a "phone-app"-problem only or if the mic does not work at all. So I just use to start the "memo"-app, and: It doens't work either. I have no clue what's wrong with the iPhone.
I also tried the update to 7.0.4 and even the reset with the same iOS build, but nothing changed.
So what should I do?
Now, the second problem is that I cannot use Touch-ID anymore. It used to work without any problems but now I does not recognize my finger(s) anymore and I am not able to scan a new finger anymore...that's really annoying. - Tried the same staff here: Update and reset, but nothing changed.
Anyone here who experienced the same problem(s)? Any help or good advice?
Thanks a lot an a happy New Year's day to everyone of you guys out there!!

I have a same problem, and my iphone is the 4S!!!
When I turn on the phone speaker, the mic isn't working, after upgrade to ios 6....
Please help us!

The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace me phone?

I have an Iphone 5 on contract with T-mobile/EE. The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace my phone or do I ahve to take it back to T-mobile? It is just short of a year into a 24 month contract.

Yes; If it's under the one year hard ware warrnety and it doesn't have any damage on the device you can get it replaced, contact Apple ASAP

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!

You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
Best of luck.

Urgent : abroad and phone not working anymore

Similar Messages

Maybe you are looking for