URGENT!!Adding Navigational attr. throws error while activating 0mat_plant

Hi All,
I am adding a navigational attribute to 0mat_plant...
& after that when I am activating 0mat_plant, it throws an error as follows:
DiagnosisErrors arose when activating InfoObject 0MAT_PLANT. An active version already existed before the activation.
System ResponseInfoObject 0MAT_PLANT could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
ProcedureThe old active version of InfoObject 0MAT_PLANT can no longer be used. Remove the cause of the activation error and activate InfoObject 0MAT_PLANT anew.
Pls help me with this issue ASAP...
Thanks
BI Learner

Hi Nitin
Thanks for your reply...
I just went to that program & activated the program...After I have to activate my object...is it what u want me to do??
ok anyway...I have 0mat_plant which is already created...with all attributes..Now I want to add a Navigational attri...
when I add & activate the 0mat_plant..I am getting the above error as I stated in my first message.
I need one more clarification...could you pls let me know..when you create an infoobject, under the GENERAL TAB, u have a option for ONLY ATTRIBUTE...What is the use of it?
ANy other ideas for my issue...????

Similar Messages

SXI_CACHE throws error while activating; but error does not exist anymore

Hi everybody,
when I try to activate a BPM in sxi_cache. sxi_cache throws an error due to a step that does not exist anymore.
What can I do?
Thanks a lot
Regards Mario

Hello,
I am still getting the error . Plz suggest.
D:\psoft\PT8.52\setup>CBLBLD.BAT C: C:\TEMP
ASCII Cobol Compilations Proceeding
Creating Directory C:C:\TEMP
The filename, directory name, or volume label syntax is incorrect.
The filename, directory name, or volume label syntax is incorrect.
ERROR! Could not create compile directory(C:\TEMP)!
D:\psoft\PT8.52\setup>

PlzzReply.. rlly Urgent:Transfer Struct. Prefix Error while Activating ODS

Hello BW Gurus,
When I am trying to activate my newly created ODS , the following error is one among the 3-4 errors : "Transfer Structure prefix is not defined for T90CLNT090 system". I am using ECC 5.0:BW 3.5
I followed the steps provided in the following link, but not successfull.
Transfer structure prefix error
I dont find any entries in SLOGSYS(T90CLNT90) & in RLOGSYS(T90CLNT90)..
I need to resolve this error as soon as possible as we dont have the Basis guy at the moment. (as it is not letting me activate the newly created ODS to load the data in it)
Not an issue awarding points.
Thanks,
Vamsi.

Hello Mr.Cora,
Thanks again for ur time in relpying me. And Extremely sorry for my late response. I am not in the City these four days.
I guess whatever u have observed is merely correct.
I am in BW learner and I am using an IDES version which is installed in my PC called ECC 5.0 (which should resemble the features related to NetWeaver 2004 and I heard ECC 6.0 should be resembling NetWeaver 2004s)
So ECC 5.0 is a combined package which has SAP R/3BW 3.5mySAP Components etc..
I Login using SAPUSER as my user ID and 800 as my client with a certain password and enter into SAP environment and then I use RSA1 to enterinto BW Administartor Work Bench (we could fix a transaction to directly switch to that screen though soon after we login)
I did not do any system copy and I dont have a specific separate landscape system and as u said mine should be Development system as My Application Server's name is: SAP_DEV_00.
I have 3 logical Source Systems defined:
1. It is the main ID i.e., T90CLNT090 with 800 Client( which is defined at the time of Installation of ECC 5.0)
2nd and 3rd are the Flat file source system which are defined by myself for my flat file loading purposes.
Note: I have Database, Application and Presentation layers in only one CPU(i.e., in my PC alone)
And Mr. Cora plz let me know the Following:
1.The conventional Landscapes and their logical names (for Non-Netweaver versions like SAP R/3 till 4.6X versions and for Netweaver 2004 &2004s versions). and
2. Does the Different landscape environments eg; DEV, QA,PROD have same Logical Sorce systems defined?? or Different ones??
Hope now u have a good idea about what I have it with my PC.
As I am not able to activate my ODS .. I am not able to load my flat data or any data.. so that I could move on with my preparation!!
Any kind of help in this reagard is more than a help for me..
thanks,
Vamsi.

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error While activating 0Material(BI7)

Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arun

Dear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
 data: l_d_length like sy-index,
 l_d_char type c,
 l_d_index type sy-index,
 l oopx like sy-tabix.
 data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
 clear : result.
 call function 'CONVERSION_EXIT_ALPHA_INPUT'
 exporting
 input = tran_strucutre-XYZ -> object name in ur structure
 importing
 output = result.
 l_d_length = strlen( result ).
 do l_d_length times.
 l_d_index = sy-index - 1.
 l_d_char = result+l_d_index(1).
 call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
 exporting
 i_chavl = l_d_char
 i_iobjnm = xinfobj
 I_S_COB_PRO =
 I_T_COB_PRO_CMP =
 exceptions
 chavl_not_allowed = 1
 others = 2
 if sy-subrc <> 0.
 result+l_d_index(1) = ' '.
 endif.
 enddo.
Regards;
Jitendra

Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm

Hello Experts,
SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
XBTR Queue is in SMQ2.
Regards
Naresh

Hello Naresh,
Check if the queue XBTR* is already registered in your SAP R3 server.
You have to do it first, if not already done.
Regards,
Subhajit

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating transformations? can you please help me

Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath

Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..

Error while activating DTP : database returned a value containing an error

Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .

Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue.

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

URGENT!!Adding Navigational attr. throws error while activating 0mat_plant

Similar Messages

Maybe you are looking for