Urgent Advice Nokia 6680

Hi. I need a big help. I own a Nokia 6680 that has lasted me for five years until yesterday. I usually maintain a four digit numeric password to access my cell whenever it is turned on. The digits are 2300. Once the password is entered then I will be have full access to use all the functions of the cell. Now the problem is that, the key pad number for Number 2 is not working! All other key pads are working. I took it to the local Nokia Care showroom where they say the problem is not the keypad but the board itself. I think they said the mother board is no longer working. However, if the motherboard is not working, then none of the keypads should work. Everything is working except for keypad Number 2. The Nokia Care persons tried replacing the keypad but still nothing worked. I am happy the 6680 has lasted me all these years, but the problem now is that I have more than 600 contact details on the phone memory that I am not able to access. Is there a WAY to break the password? Any software or device? Once the password is broken, then I can access the cell. Every few months I backup the phone memory details on the memory card but without accessing it on this cell, I am not able to retrieve it. That is the miserable part. I was told there is a software known as Noki Crack. Does this work? Or is there a simpler way? Please advice. Thank you.

Okey, I understand. Only a Nokia care point can fixe this for you as this is related to hw issue with your keyboard.
You can find your nearest Nokia care point here: http://europe.nokia.com/support/repair-and-recycle/repair/care-points

Similar Messages

  • Help need : NOKIA 6680

    Hi Im using nokia 6680 since last a year...n now i am having problem with my camera......when i press camera option, its not responding..when it responding...camera is not switching on...pls explain me the problem.....n my system some times get restarts automatically..... urgent help needed....

    Does it help, if you remove the memory card? If so, something's wrong with the card.
    You can also save (back up) your data and try the Nokia Software Updater:
    http://www.nokia.com/softwareupdate
    Or just reformatting:
    /discussions/board/message?board.id=smartphones&message.id=4007
    If those things are not enough, have a Nokia service/repair center take a look:
    http://www.nokia.com/repair

  • Nokia 6680 vs Nokia 6630

    Hi,
    I am currently looking to change my phone. I have currently got the Nokia 6630 and I am looking to get the Nokia 6680. Are there any main differences and are there any known issues?
    Thanks
    Nokia N95, 6300, E61, 7250i, 7210. 6630, N76, N70, 6310i, 8210, 5500, N73, 5200, 6600, 6610i

    6630 and 6680 are basiclly the same.the main difference is that 6630 has a 65.000 colors display opossed to the 256000 on the 6680. Also the 6680 has 2 cameras so u can see and be seen during a video call.With the 6630 u have to turn the phone in order to be seen ore use it with the 3g stand that will raise its price so even if the 6630 its a very good phone(had one for about a year without any problems, both music and videos look cool and the camera is quite impressive when anogh liht is available) i have to advice u to buy the 6680.Extra camera , better display, better looking and add to that the fact that both have the same processor and operating system.plus , the 6630 3g is quite expensive.
    Hope this will help
    Phones i owned so far 6630,6680,N90,N93*

  • Nokia 6680 doesn't boot - at all

    Hi,
    i've got a problem with my Nokia 6680.
    A week ago it started to ignore some number keys becoming unusable. I coldn't backup the data (due to lack of time), so I decided to use use another phone. I left my 6680 open with the battery.
    Now, it doesn't start up. The display lights up with the Nokia logo only when i plug the phone to the charger. I changed the battery, pushed the 3*power etc combination, but nothing happen.
    Any advice? 

    It doesn't sound good and you seem to have tried everything already. Next step is to send it to a Nokia Care Point or get a new phone.
     You can find your nearest Nokia Care Point at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair. 

  • Capture picture with nokia 6680

    I'm developing an application for Nokia 6680, and need to access the videoplayer through my gui so I can capture a picture and send it to a webserver.
    I'm having trouble initializing the player. It throws a MediaException with Symbian OS error -5, "the operation requested is not supported".
    It works just fine in WTK 2.2 and with SE K700.
    I've also checked the supports.video.capture system-property, and it returns true.
    Here's the code:
    class CameraForm extends Form implements CommandListener {
      private final MyMIDlet midlet;
      private final Command exitCommand;
      private Command captureCommand = null;
      private Player player;
      private VideoControl videoControl;
      private boolean active=false;
      private StringItem messageItem;
       public CameraForm(MyMIDlet midlet){
          super("Camera");
          this.midlet=midlet;
          messageItem = new StringItem("Message","start");
          append(messageItem);
          exitCommand=new Command("Exit",Command.EXIT,1);
          addCommand(exitCommand);
          setCommandListener(this);
          //initialize camera
          try {
             player = Manager.createPlayer("capture://video");
             player.realize();
             //Grab the videoControl and set it to the current display
             videoControl=(VideoControl)(player.getControl("VideoControl"));
             if(videoControl != null){
                 append((Item)(videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,null)));
            captureCommand = new Command("Capture",Command.SCREEN,1);
            addCommand(captureCommand);
            messageItem.setText("OK");
        }  else{
            messageItem.setText("No video control");
    } catch(IOException ioe){
          messageItem.setText("IOException:"+ioe.getMessage());
    } catch(MediaException me){
          messageItem.setText("MediaException cameraForm(): "+me.getMessage());
    } catch(SecurityException se){
          messageItem.setText("Securityexception:"+se.getMessage());
    }Thanks!

    Peter,
    Sorry for the late reply, have been really busy the past weeks.
    Yesterday I got another Nokia 6680 on which my MIDlet wouldn't run. Got the MediaException -5 (meaning "Not Supported") again.
    I tried the code *#7370# to hard reset the phone (see Step 1 below), with no success. But I did manage to get it working (after continuing with the procedure below).
    The following explains the steps I followed:
    NOTE: Backup all data on your phone before continuing as all will be lost!
    Step 1:
    a.) Enter the code *#7370#
    b.) Answer [Yes] to the following prompt: "Restore all original phone settings? Phone will restart."
    c.) Enter the security code when the phone prompts for it. (Default: 12345)
    d.) The phone will now restart.
    e.) Once restarted, all data will have been erased and the phone will ask you for some settings.
    Step 2: This is a bit tricky...
    a.) Turn off the phone.
    b.) Press and hold the following keys: [Answer] + [*] + [3]
    [Answer] = Answer key (green phone)
    [*] = Star key
    [3] = Numeric 3 key
    c.) While holding the above keys, press the [Power] button to switch on the phone.
    d.) Once again all data will have been erased and the phone will ask you for some settings.
    Step 3:
    Follow Step 1 again.
    Install your application after each step and test to see if it isn't maybe working. My MIDlet only started working after completing Step 3. I am not sure if Step 1 is actually necessary, but I have listed it as this is the path I did folow.
    That is it, hope this works for you.

  • Nokia 6680 Standby Mode Problem

    I cant change my Nokia 6680 Standby Mode. Its disapeard. When I go to Setting and then Standby Mode, I cant see Activate Standby Mode there anymore. Ive formated phone memroy but still I cant...Anybody has any information about this problem?

    15-Mar-2008 07:57 AM
    clairelouise73 wrote:
    Hi. I've recently been given a Nokia 6680 which I've had unlocked and started using. I've found that when I plug my charger in the phone indicates it is charging but once I pull the charger out (after various periods of time) it shows up as low battery. I have tried 2 different chargers and 2 different batteries. I am currently using an old nokia phone to charge up a battery to put in the 6680 every day. Help? Am I doing something wrong??
    Prior to it being unlocked it charged up no problem.
    If you have a new phone you need to keep it on charge for 16 hours. Once the battery is fully charged the charge indicator stops moving which would tell you that the battery is full.
    If my post has helped you please click the white star on the right

  • Nokia 6680 - switch message from off?

    Hi,
    I would like to send anonymous text messages with my 3G contract nokia 6680. Is this possible?
    Please advise.
    Thanks in advance.
    Nagsy

    don't think its possible to send texts without your number coming up!!

  • Nokia 6680. . Help pls.

    Hello, i have my Nokia 6680. I've been searching my manual and different sites for me to know how can I modify my screen saver on my phone. Pls help me..

    Hi sam_0317
    You could try Psiloc screensaver available from:
    http://shop.psiloc.com/en/Application,65552,Psiloc+Screen+Saver
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 6680 maximal MMC size

    Hello
    I want ask, what is maximal size of RS-DV-MMC cards that can be used in Nokia 6680. I was looking for it on web, but I didn't find it. I want buy 4GB card but I am not sure it will work properly, post, please, what card do you use and what biggest you tried (remember that card can work properly for example up to 2GB and when you reach this point it may crash etc.).
    Thank you

    It IS possible to change the font on a nokia 6680!
    Just install a new font of a bigger size. More info can be found on : http://www.symbian-freak.com/tunning/fontquide/fonts.htm
    CheersMessage Edited by z500 on 22-Nov-2005
    07:12 PM

  • Nokia 6680 unable to send texts

    I've had a Nokia 6680 for about 7/8 months now. In that time its every so often decided its memory is full (when it isnt) and be unable to send texts. This was normally fixed by turning it off and on. About a week ago this stopped fixing the problem. Over the next few days I had to put up with not being able to send any texts. 3 days ago I hard reset it a few times and it fixed the problem. However the problem has returned again. I really dont want to have to hard reset my phone every few days since thats a bit annoying.
    Has anyone come accross this before? (Phone memory is 66% free, RAM is 99% free and MEmCard is 40% free).

    Very odd, don't really know what to suggest about that one!
    Try entering the number as 0044 instead of +44.
    If you have delivery reports enabled, try disabling them or vice versa.
    Make sure "Reply via same centre" is set to "no" in the messaging options.
    Can't really thing of much else to try! My guess is that it's an odd network fault that is blocking it.

  • Nokia 6680 new firmware?

    Hi guys,
    Did Nokia realese new firmware for Nokia 6680?:
    v5.04.40
    20-11-06
    RM-36
    I was just checking for the new firmware for Nokia 6680,
    via Nokia Software Updater. And I was surprise to find there are
    new updates. Then I upgrade my 6680 from v5.04.07 to v5.04.40.
    After upgrade, I notice that there are some difficulties in making & receiving calls, and sending SMS. I'm staying in Malaysia and using Celcom 3G. I refer the provider on this matter, and they said their network is ok.
    Could it be the upgrades?
    What are the changelog for v5.04.40

    Yeah, that's what I thought. An upgrade is suppose to improve the use. Unless, the new firmware has a tiny bug, or it's an unofficial release. I looked up in the Internet, so far, no info about the new firmware.
    Can Nokia release an unofficial firmware?
    Thanks for the help.
    Firdaus
    xxxxxxx

  • Nokia 6680 Spanish language lost

    I own a Nokia 6680 with product code 0521642 brought in Spain. Today I updated it with NSU (never had updated it before) and it has rebooted with english language. It doesn't give me the option to change it, only English, German and Turkish are available as languages. What should I do?

    Your 6680 was not a Spanish version originally, the update restored the original languages.
    If you take it to a local service centre and explain situation they can advise you further.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • Plz help lost my arabic langauge nokia 6680

    Plz help i lost my arabic langauge when i update my phone "nokia 6680"
    i found 3 langauge English Deutsh Turkce
    i need english , franch and """""""arabic"""""""
    what should i do ?
    please help ???????????????

    You could use the "Search" function of the site and read about others with the same problem with Arabic.

  • How to update software of nokia 6680??please help ...

    software

    Hi ZaffarKhan,
    Welcome to Nokia discussions board!
    Thank you for your post. To update your Nokia 6680, you need to download Nokia PC Suite on your PC and install it. After the installation, open it and plug in your device to your PC with the USB cable, once it recognises your device it should search automatically for the latest update.
    Tell us how you're getting on
    Sergent
    If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
    Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
    DON'T BE SHY...

  • Can work in Canada my Nokia 6680?

    I will visit and long time stay in Canada.I lived in Sweden. I wondered for can used in my nokia 6680 for Canadian Mobil Providers? And have sim card also? I need know about it.. Thank You! P.s. sorry my bad english.

    PaulJebara,
    The iPhone is sold as carrier locked in both the U.S. and Canada.
    Neither AT&T or Rogers/Fido offer an option for an authorized unlock.
    The iPhone can be purchased in some other countries either already unlocked, or with an authorized unlock as an option. However, if you needed service or support, such as hardware repair, it would have to be handled in the country the iPhone was sold in.
    For a list of countries that offer the iPhone, including which ones offer it unlocked or with an authorized unlock option see this article:
    http://support.apple.com/kb/HT1937
    Hope this helps,
    Nathan C.

Maybe you are looking for

  • Session scope managed bean is not instantiating?

    We have the need to use a session bean (rather than pageFlowScope) in our application.  But it looks like the session beans are not being instantiated at run time like other beans are.  I created a simple test case to verify.  One bean, named "MySess

  • How can I rotate a clip, but then crop it normally?

    I am trying to use Final Cut Pro X to edit a video I shot with my iPhone 4.  In the video is a piece of paper.  The iPhone wasn't perfectly level when I shot the video, so the paper is skewed (well, rotated) a bit. After adding a small rotation, the

  • OCA certification in Oracle 10g

    Hi , I would like to take OCA certification in Oracle 10g.I am very much new to this. please tell me all the details about this including : 1)Names of exams I have to take one by one and how many exams . 2)Where do i get good Course syllabus/Material

  • What r the steps to print barcode in smartforms

    hi experts, can anybody tell me what r the steps to print barcode in smartforms. with examples is appreciated. points will be rewarded if helpful.

  • How to unlock FW CS5?

    I was in the process of building an image and FW froze up. I had designed an image by overlaying a semi-transparent box on top of it it and decided to try the same thing again with a new image and a box with rounded corners that time and the image fr