URGENT: APPRAISALS: Defaulting of participants/managers in the appraisal

Dear Friends,
I have created an appraisal template in the objective settings and appraisals node of IMG. We are using the template through ESS for the employee performance appraisal. Whenever the employee starts the appraisal process, s/he has to enter the employee numbers of all the managers/reviewers at all the levels. The levels are as follows:
Appraisee
Reporting Officer
Reviewing Officer1
Reviewing Officer2
Pre-reviewing Officer2
Performance Management Committee (One Entity)
I have created the relatinships of each level entity with the appraisee.
My question is - "How can I default all these reviewers/managers using the relationships I have created?"
Please help me find a solution urgently.
Regards,
AXE

exactly work flow.
because associate reviewed by superior. it is dependending upon reporting structure and work flow.this is permenent solution.
for instance you can maintain in custom table.it is very easy than doing work flow and all.then create a report to which pich the values from the table insted of from OM reporting structure and then generate
hope its clear now...
Ramesh

Similar Messages

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

Hi Ramy,
As a work around , you can create a VM without installing OS and configure the Vlan of VNic , then export it .
The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Fetching the Participant list from the role

Hi,
I am trying to fetch the participant list from the particular role.
I have tried the below code for to excute that, its shows the error.
session = Fuego.Fdi.DirectorySession.currentEngineSession
attendeeRole = DirOrganizationalRole.fetch(session : session,
id : "attendee" )
parts = fetchAssignedParticipants(attendeeRole)
for each p in parts do
*     logMessage "Attendee: +" p.displayName +"("+p.i+")"*
end
Could you pls anyone tell me,what is the issue?
Regards,
Anandh P

Hi,
Thanks for ur reply.
The below error im getting while excuting thorugh an automatic activity
A component failed while executing activity '/Requisition#Default-1.0/ComponentExecution[Automatic]' (BP-method automatic) over instance '/Requisition#Default-1.0/1/0'.
Details:
The method 'CIL_automatic' from class 'HROnboarding.Requisition.Default_1_0.Instance' could not be successfully executed.
Caused by: java.lang.NullPointerException
fuego.lang.ComponentExecutionException: The method 'CIL_automatic' from class 'HROnboarding.Requisition.Default_1_0.Instance' could not be successfully executed.
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:519)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:273)
     at fuego.fengine.FEEngineExecutionContext.invokeMethodAsCil(FEEngineExecutionContext.java:219)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1284)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:262)
     at fuego.server.execution.ToDoItem.run(ToDoItem.java:548)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:775)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:469)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.NullPointerException
     at HROnboarding.Requisition.Default_1_0.Instance.CIL_automatic(Instance.xcdl:5)
     at HROnboarding.Requisition.Default_1_0.Instance.CIL_automatic(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.component.ExecutionThreadContext.invokeMethod(ExecutionThreadContext.java:512)
     ... 23 more
Can you pls help me to resolve this.
Regards,
Anandh P

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode.
Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!! I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

Drag it over to the Left. Then lock it there.

Setting a New Default "Output To" Template in the Render Que Does Not Work

I'm trying to change the default "Output To" template in the Render Que to not show the timecode for a PSD file, but when I change the default template by clicking on "Custom" from the dropdown menu and using the checkbox to set a preset as the default in the "File Name and Location Template", nothing changes. The next PSD item I add to the render que still uses the previous template (i.e. it adds the Frame) and doesn't honor the new default I just set.
Just submitted a bug report, as well.
Using AE 2014.1.1 (13.1.1.3)
Windows 8.1 Pro

I'm not surprised either of you is having problems creating a new output module and making it the default. That's not where you do it.
Go to Edit>Templates>Output Module. Make a new one. Select one to use as a default. Select a different one if you want a different default. You can have a default for both stills and movies. You can do the same thing for Render Settings. It's the same basic drill.
Since this is basic AE 101-type stuff, I bet you'd get a lot out of these how-to's from the pros:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

HT1338 Even though I have the Pages 5.0.1 installed as the default software, I still receive the message "You need a newer version of pages to open this document." HELP!

Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.” HELP!

Please clarify....
Mac OS X (10.4.6)
What your system profile shows yet, you posted in the ML forums.

When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan

Multiple OLE DB connection managers to the same database instance in a SSIS package

Hi,
While migrating DTS package to SSIS package, I came across one which had multiple OLE DB connection managers all connecting to the same Oracle schema in the same instance.
There are that many execute SQL task corresponding to each of these connection managers.
Each of these SQL task call different Oracle stored procedures and executes them in the same schema in the same instance.
My question is, is there any particular reason or advantage in having multiple connection managers?
Can't we have one single connection manager and use the same in all of these SQL tasks?
Does multiple connection managers provide any added advantage like parallelism or something?
In this particular case, there are no actual workflows, rather each of these SQL tasks are stand alones. But there are other packages which has SQL tasks in workflow but still each of them calling separate connection managers all calling the same schema
in the same instance.
Thanks for your time.
Cordially, Biju George

Well like I said, each of these SQL task calls "different" Oracle stored procedures even though executes them in the same schema in the same instance. I tried a sample testing by creating two separate packages, one with only one single
OLE DB connection referred in all of the SQL tasks and in the other one with mutiple OLE DB connections to the same schema in the same instance each of which is referred in each of the SQL task in one to one mapping.
Now the first one created one session in Oracle but the later created as many sessions as there where OLE DB connection managers. The first one took longer to complete than the second one since second one created independent sessions and executed those procedures
sort of parallely.
I guess that can be called an advantage of creating multiple connection managers to the same schema in the same instance.
Cordially, Biju George

How can we default a Purchase Organisation in the PR generated through MRP

Hi,
How can we default a Purchase Organisation in the PR generated through MRP
(This is a Auto generated PR when the MRP Run is taken)
We take a MRP Run for CBP. After the MRP Run system Auto generates a PR. But this PR does not have the P.organisation mentioned in it. It has to be done manually.
How can we Default the P.Organiastion in the PR.
NS

The Purchasing Organization is only filled in the Purchase Requisition
when a source is assigned because it represents a source of supply.
Please also refer to attached note 206684 for more information.
When executing a MRP-run, it is checked first if there exists a quota
arrangement, the source list is read after it and the purchasing
organization is taken from the source list. But before filling
the relevant field in the purchase requisition (EBAN-EKORG), the
system checks if there exists a record in the source list which is
RELEVANT TO MRP, which means that the parameter 'MRP' has to be set to
'1'.
So please ensure that MRP = 1 in ME01 for the existing records and start
the next planning run with planning mode = 3 and check the results.

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

How do I change my default "SAP Working Directory" to the one I wish ?

Hello Gurus,
How do I change my default "SAP Working Directory" to the one I wish ?
At the moment default SAP Working Directory to set to the following directory.
"C:\Documents and Settings\T51273\SapWorkDir"
So, when ever I try to download a Report/Table Contents/Spool Request, SAP prompts me to save in the above SAP Working Directory, which is "C:\Documents and Settings\T51273\SapWorkDir". Ofcourse I can change the folder in the dialogue box, but I don't want to change the folder each and every time I download a report from SAP.
I wish to change my default "SAP Working Directory" to "My Documents" Folder. So that from next time,
if ever I try to download a Report/Table Contents/Spool Request, SAP should prompt "My Documents" Folder. That way I don't have to change the folder at the time of saving.
Full Points are assigned for an answer that works...
Thank You,
Nag.

Hello,
A short question about transaction SO21:
Is this a local setting, per GUI?
Or does this affect all users?
I have a problem opening an attachment (Mandates).
SAP wants to save it to C:\Windows\System32\
I see that is stated at SO21.
If I change that to another (accessable) location, does that affect the opening of the attachment?
Thanks!

URGENT: APPRAISALS: Defaulting of participants/managers in the appraisal

Similar Messages

Maybe you are looking for