URGENT: ASA Standard DNS Configuration Option????

All,
I am trying to implement "standard dns" on an ASA. I have not been able to find out how this is configured as opposed to: split-dns or tunnel-all-dns? Any pointers would be great.
Thanks in advance!!
Scott Jackson
Systems Engineer

Hi Scott,
This should help you to configure DNS for from the box traffic.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/basic.html#wp1080248
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.

Similar Messages

Support for IPv6 Router Advertisement Option for DNS Configuration RFC 5006

Hi everyone, do you know that whether Cisco routers support “IPv6 Router Advertisement Option for DNS Configuration RFC 5006” currently, is there any roadmap for this support? Thanks for your help!

No, this is not currently supported, and the last I heard, there is no roadmap for this until it becomes a standard (as opposed to being experimental).

Custom Configuration options for new U430

I would like to buy U430 laptop, but I don't see how I can configure options like CPU, Memory Size etc...
I just have an option to select a model and no way to customize it. Here is the page I go to:
http://shop.lenovo.com/us/en/laptops/ideapad/u-series/u430-touch
I tried several other types like YOGA, but don't see any configuration options also.
Am I missing something, or you can't build Custom Lenovo Laptop any more?

Hello mag20, welcome to this forum.
     Yes, you can build a Custom Lenovo Laptop. However, you need to call, or chat on line, with the sales team. The website has some customization options for their ThinkPads, which you can do on line. For example, see the T440s page:
http://shop.lenovo.com/us/en/laptops/thinkpad/t-series/t440s/
      If you want a U430 Touch, it would be better to know what possible options are available in that system, before you call, or chat. The best way to know this, is to read the part list, in the Hardware Maintenance Manual (HMM). Here is the HMM for the U430 Touch:
http://download.lenovo.com/consumer/mobiles_pub/lenovo_u330p_u330%20touch_u430p_u430%20touch_hmm.pdf
     Page down to Table 5, Parts List - Overall, on page 69. Part No. 4 is the RAM, 6 is the processor, 7 is the hard drive, 10 is the SSD, 12 is the WLAN.
     Be aware, that not all options, are congruent with some of the other options, that you may want. i.e. I don't think you can have both a hard drive, and a 256 GB SSD, but I don't know. You probably can get the drive, and a 24GB NGFF SSD, as that goes in a different slot. That's why you need to chat/talk with a sales rep.
      Keep in mind that if you custom order a Laptop, it may be more expensive than "standard on line model", but the reps have a certain amount of latitude, and you can still get a good "deal" .
     You may need to wait a little longer for it to be built, and shipped. The upside of this process is, you get the laptop you really want, with the configuration you need!
     Happy shopping!
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Promotions at configuration option for a configurable product

Is it possible to apply promotions to a specific configuration options in a Configurable Material?
For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
Base Price of Material A: $1000.00
Confuguration option X : $200.00
Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
Net Price of Material A with Config option X should then be:
$1000 + ($200 - $20) = $1000 + $180 = $1180
If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
Thanks in advance
SCB
Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

Hi,
Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
Please let me know you answer, so that I will try to help you to solve the download issue
<b>
Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Touch screen configuration options for Windows 8.1

Which kind of configuration options are available for the following:
PC configuration:
MSI-GeForce-GTX-750-Ti in PCIex16_1
   ~ DVI-D free
   ~ VGA free
   ~ HDMI connectd to Samsung 24" monitor
NVIDIA Quadro FX 1800 in PCIex16_2
   ~ DisplayPort connected to Samsung 24" monitor
   ~ DVI-D port free
Scenario options(?):
1) medium (21.5") touch screen is used mainly as GUI for command & control
    and two digital displays are used for content
   a) USB 2.0 is fast enough for touch screen i.e. USB 3.0 not needed
   b) touch sreen connected to NVIDIA Quadro FX 1800's DVI-D port
2) medium (21.5") touch screen both as display and touch screen
   a) MSI-GeForce-GTX-750-Ti card HDMI-port connected to touch screen
       (DVI-D port to Samsung 24")
3) small touch screen supported by Windows 8.1
  a) Intuos Pro Pen & Touch Small
https://store.wacom.com/us/ ?
  - is the industry standard the Microsoft Ink API or the Wacom Wintab API ?
4) Microsoft/Nokia smart phone/tablet device as touch screen to Windows 8.1
  a) remote connection to Windows 8.1
Other options ?

4) can one use any Microsoft/Nokia smart phone/table device as touch screen to Windows 8.1 ?
Can you install Remote Desktop Connection on that? Another related tool which would be worth looking at is TeamViewer...
http://www.teamviewer.com/en/download/mobile.aspx
Robert Aldwinckle

DNS configuration

Hi All
This may be a silly question so please forgive me, I haven't set-up a DNS in a while and I know I have forgotten something simple in my configuration.
I have set up an Xserver 10.5.6 with a fully qualified domain name for example:
mydomain.com
machine name: ho.mydomain.com
For some reason I am unable to access the external hosted web site without www (https://mydomain.com) on the internal network.
From out side I can access the external hosted site with or without www, so my external hosting configuration is correct.
What simple thing have i missed in DNS configuration my configuration?
Primary Domain:
mydomain.com
www. machine (external ip address of web host)
ho machine (server ip address)
Please help, what have I forgotten to do?

Hi,
I think you want to replace
www. machine (external ip address of web host)
with
A record mydomain.com -> external IP
This sends an external request outside and comes back in;
that way you can reach either www.mydomain.com or mydomain.com
Ensure you have an alias record in the website setup for the www.
HTH,
Harry

DNS configuration in two-domain forests

hi all,
We have a forest with two separate domains.First of all we had domain A. When we added the first domain controller for the second domain (B), a trust relationship was established and look fine. but then we realised DNS configuration was not nice and
some replication issues came out.
What we have done is setting up domain B zone as a secondary Zone in domain A, and viceversa.
We configured primary zones to be able to be transferred to the Domain controllers in the other domain and also configured notifications.
Even with this configuration, some times we check zones and find it empty but a single.
Does anyone one if our configuration is the right one for our infrastructure? I have been loking in the internet for a manual or a document regarding DNS configuration for this infrastructure, but I could not find it, Do you know of any manual or document?
Thank you very much
kind regards.
David.

Hi David,
First, make sure that the TCP and UDP port 53 is not blocked. To verify it a port is blocked, please use the portqry.
To download portqry, please click the link below,
PortQryUI - User Interface for the PortQry Command Line Port Scanner
http://www.microsoft.com/en-hk/download/details.aspx?id=24009
If the port is not blocked, please check the serial number of the zone in both of the primary and secondary server.
If serial number is the same at both the source and destination servers, no zone transfer occurs between the servers.
To resolve this issue, please follow the steps blow,
After you increase the serial number at the master server to a higher value than is used currently at the secondary server, initiate zone transfer at the secondary server.
Increase the value of the serial number for the zone at the master server (source) to a number greater than the value at the applicable secondary server (destination).
Here is an article about how to troubleshoot zone issues, it may be helpful.
http://technet.microsoft.com/en-us/library/cc731210.aspx
Besides, instead of creating scondary zone, we can add conditional forwarder on the DNS server.
To add conditional forwarder, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc794735(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support

DNS configuration for web access

Hi All,
I'm setting up a SL server for the first time and it's working great for users inside our building and on our network, but we're unable to access anything on it through the web (including a basic homepage) and I think it has to do with our DNS setup. We've got the domain tgroupproductions.com through goDaddy and I've set up the ns1 and ns2 info in the host summary pointing to my public ip 216.3.118.152 and added both ns1.tgroupproductions.com and ns2.tgroupproductions.com to the goDaddy nameserv list.
I've attached images of my dns configuration and of the intodns.com scan results. I just want to double check to make sure I'm setup correctly. It's possible I just haven't waited long enough for the changes to take effect
DNS Setting: https://files.me.com...ek.klein/mp3enf
Intodns.com: https://files.me.com...ek.klein/d33nlt

Sorry about the images...don't know why they are working. I'll embed them at the bottom of this post.
As for why I'm not using GoDaddy...I have no problem using them as a public dns (meaning I'd have to change the nameservs back to the ns17.domaincontrol.com and ns18 nameservs?) but the site wasn't functioning with those in place so we tried to set up our own internal dns. I had followed a tutorial at http://osx411.com/index.php?/topic/19-using-mac-os-x-server-to-host-websites-fro m-home/ but either I'm misunderstanding or I missed something.
Here are the images:
Message was edited by: fkick1

I'm unable to find configuration option under sett...

Hi, I m unable to find configuration option under settings menu. please help. I am using Nokia X2 dual sim
Moderator's Note: Post was moved and changed the title into a subject-related title.

Hi, what would you like to configure?

Mail server and DNS configuration

I have an XServe G4 running Mac OS X 10.4 Tiger Server, and I have successfully configured two domains that I purchased from GoDaddy as websites on this XServe. It's behind an Airport Extreme, and I have forwarded a bunch of ports in order to enable FTP, SSH, Web, remote Server Administration, webmail, and I have also forwarded the IMAP and SMTP ports. All of these services work except for email, so I am wondering if there is any special DNS settings that I need to configure in the GoDaddy total dns configuration page. I have the MX record pointed directly to my IP, just like the A record. I also have mail.mydomain.com pointed to the A record's IP (maybe I described that poorly, but I hope it gets the point across). I am able to log into webmail and send email out to other people, but when I try replying back to the email which I sent from webmail, I get a bounced message. I also cannot configure a Mail client, but I think I need to get the accounts at least working first. Can someone provide a list of DNS requirements or server configuration requirements for me to check off in order to make this happen? Does anyone know of any great resources to learn this kind of stuff? I'm kinda new to the server thing.
Thanks!
Paul

postconf -n results:
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
html_directory = no
inet_interfaces = localhost
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,rubenkalath.com
mydomain = rubenkalath.com
mydomain_fallback = localhost
myhostname = mail.rubenkalath.com
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
ps U _postfix results:
ps: _postfix: no such user
tail -20 /var/log/mail.log results:
May 15 15:55:27 sincity postfix/cleanup[1257]: 765DC4517A: message-id=<[email protected]>
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: from=<[email protected]>, size=881, nrcpt=1 (queue active)
May 15 15:55:27 sincity postfix/smtpd[1254]: disconnect from localhost[127.0.0.1]
May 15 15:55:27 sincity postfix/pipe[1259]: 765DC4517A: to=<[email protected]>, relay=cyrus, delay=0, status=sent (mail.rubenkalath.com)
May 15 15:55:27 sincity postfix/qmgr[1239]: 765DC4517A: removed
May 15 15:58:09 sincity postfix/smtpd[1338]: connect from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 15:58:13 sincity postfix/smtpd[1338]: disconnect from localhost[127.0.0.1]
May 15 16:06:09 sincity postfix/postfix-script: refreshing the Postfix mail system
May 15 16:06:09 sincity postfix/master[590]: reload configuration
May 15 16:12:48 sincity postfix/smtpd[1709]: connect from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: lost connection after CONNECT from localhost[127.0.0.1]
May 15 16:12:54 sincity postfix/smtpd[1709]: disconnect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: connect from localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/smtpd[2068]: 1FA354537C: client=localhost[127.0.0.1]
May 15 16:28:58 sincity postfix/cleanup[2071]: 1FA354537C: message-id=<[email protected]>
May 15 16:28:58 sincity postfix/qmgr[1530]: 1FA354537C: from=<[email protected]>, size=776, nrcpt=1 (queue active)
May 15 16:28:58 sincity postfix/smtpd[2068]: disconnect from localhost[127.0.0.1]
May 15 16:29:02 sincity postfix/smtp[2072]: 1FA354537C: to=<[email protected]>, relay=mercury.gatech.edu[130.207.192.26], delay=4, status=sent (250 Ok: queued as 67542CDF86)

How to pass standard program selection options to custom program?

Hi... i want to use standard program select-options in a custom program.. actually in a custom program i'm using one standard program and one custom program. standard program contains selection scren. i want to use that selection screen in custum program.
can anybody please provide solution for this.
looking forward for ur updates

first you must find where the selection screen logic is written in standard one.once you get this details than you may Include the same screen and include program in your zprogram.and here your work is not finished you may need to do some change apart from copy all this details.
Amit.

ODBC DNS Configuration Error IM002 10040

1. When logging in to analytics with Weblogic user:
Unable to Sign In
An error occurred during authentication. Try again later or contact your system administrator.
2. Weblogic user is abel to log in to the console and em successfully.
3. This is not a GUID issue
4. This is an issue with the DNS configuration, What value is it looking for? How do I properly set the DNS
5. I have reviewed Note:1554245.1, the Solution makes sense, however I do not know how to resolve the correct <DNS> parameter value .
Error:
[tid: 1732] Error retrieving user/group data from Oracle BI Server's User Population API.
Unable to create a system user connection to BI Server while running user population queries
Odbc driver returned an error (SQLDriverConnectW).
State: IM002. Code: 10040. [NQODBC] [SQL_STATE: IM002] [nQSError: 10040] The requested data source name is either not found, incomplete, or incorrect.

Here is the entry in the InstanceConfig.xml file
<DSN>coreapplication_OH647982366</DSN>
How does that map to an DSN entry? Is that the Name of the entry? Because I dont have an entry with that name. And yes, the OBI enrties I have work.
I've looked at my other working enviornments trying to figure out what this entry should be and the DSN entry is not in the System DSN list there either.
<DSN>coreapplication_OH1527389259</DSN>
What is it looking for? The OBIEE metadata repository?
Can someone explain how obiee validates the user and credentials?

Cant see the configuration option in youtube videos.

hi i have a asus
notebook n53jg and when i go to youtube and try to conigurate the flash player i cant because i right click on he video and then all the options are able except by the configuration option please if some one can help me i would very thankfull..

Hi, try the Setting here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html
http://www.adobe.com/software/flash/about/ Right click on the Flash logo, click onSettings, then UNcheck hardware acceleration at Display Settings.
eidnolb

How to start a systemd with certain configuration options?

Hello,
I do not understand what wiki page at arch that can help me to understand how I can start a daemon with certain configuration options. I know I can start with
# systemctl enable unit
, but for example, if I whanted to start "xboxdrv" with the option [--mimic-xpad-wireless --silent], or any other custom options I might need. I presume it can be done simple by dropping a .conf file somewhere, but I do not follow what wiki page that adress this - if it at all is possible?
Regards
Martin

Hello,
I followed the drop in option now in https://wiki.archlinux.org/index.php/Sy … n_snippets
I tried to copy the whole xboxdrv.service and replace the ExecStart, and also only with ExecStart, like this:
[Service]
ExecStart=
ExecStart= ExecStart = /usr/bin/xboxdrv -D -c /etc/default/xboxdrv --mimic-xpad-wireless --silent
The drop in examples above is in: /etc/systemd/system/xboxdrv.service.d/override.conf
Reatarting
I then made sure the new .conf file was loaded by:
# systemctl daemon-reload
# systemctl restart xboxdrv
# system status xboxdrv
Result
In both cases, the service fails to restart and I recive this error
xboxdrv.service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Anyone know how I can start "xboxdrv" with my custom options "--mimic-xpad-wireless --silent" using this drop in function for systemd?
Regards
Martin
Last edited by onslow77 (2015-02-01 18:27:31)

Where is old DNS configuration stashed?

I upgraded my Mac Mini Server to OS X Mavericks and then downloaded to OS X Server application. All the DNS configuration data has gone missing. Does anyone know where the old data has been stashed?
My home network is relatively small but it is still a pain to need to manually regenerate my local zone files.

I upgraded my Mac Mini Server to OS X Mavericks and then downloaded to OS X Server application. All the DNS configuration data has gone missing. Does anyone know where the old data has been stashed?
My home network is relatively small but it is still a pain to need to manually regenerate my local zone files.

URGENT: ASA Standard DNS Configuration Option????

Similar Messages

Maybe you are looking for